Page: MC-HHD-#
2013
3
2017
5
2027
7
213
9
217
11
227
13
237
15
245
17
205
19
215
21
225
23
235
25
305
27
307
27
309
27
206
29
5305
31
5310
31
MC-HHD-1
Dimensions and technical information are subject to change without notice
75 to 100 [2.95 to 3.94]
50 to 75 [1.97 to 2.95]
100+ [1.57+]
85 to 100 [3.35 to 3.94]
70 to 85 [2.76 to 3.35]
55 to 70 [1.57 to 2.76]
40 to 55 [1.57 to 2.17]
Height Under
Clamping Bar
mm [inch]
25 to 40 [0.98 to 1.57]
0 to 25 [0 to 0.98]
50 to 60 [1.97 to 2.36]
40 to 50 [1.57 to 1.97]
30 to 40 [1.18 to 1.57]
20 to 30 [0.79 to 1.18]
Max. Holding Capacity
N[lbf.]
10 to 20 [0.39 to 0.79]
0 to 10 [0 to 0.39]
7000 to 10000 [1575 to 2250]
5000 to 7000 [1125 to 1575]
3000 to 5000 [675 to 1125]
2000 to 3000 [450 to 675]
1000 to 2000 [225 to 450]
0 to 1000 [0 to 225]
Series
horizontal hold down clamps
Sizing and Application Chart
Overall Height
mm [inch]
Dimensions and technical information are subject to change without notice
Excellent/High
MC-HHD-2
Fair/Medium
Poor/Low
Harsh/Dirty
Mounting
Style
Normal
Weld-On Mounting
Flanged Base
Arm
Style
Straight Base
Standard
Material
Solid Arm Version
U-Bar Version
Toggle Lock Plus
Stainless Steel
Suitable Application Area
Steel
Duty Cycle
Food Processing
Closures
Woodworking
Machining
Overal Width
mm [inch]
Checking Fixtures
Assembly
Welding
55 to 70 [1.57 to 2.76]
40 to 55 [1.57 to 2.17]
25 to 40 [0.98 to 1.57]
Overall Length
mm [inch]
0 to 25 [0 to 0.98]
250+ [9.84+]
225 to 250 [8.86 to 9.84]
200 to 225 [7.87 to 8.86]
175 to 200 [6.89 to 7.87]
150 to 175 [5.91 to 6.89]
Height
nch]
125 to 150 [4.92 to 5.91]
100 to 125 [3.94 to 4.92]
75 to 100 [2.95 to 3.94]
50 to 75 [1.97 to 2.95]
100+ [1.57+]
85 to 100 [3.35 to 3.94]
70 to 85 [2.76 to 3.35]
­MC-HHD-2
horizontal hold down clamps
Sizing and Application Chart
Service
Environment
Not Recommended
2013 Series
Horizontal Hold Down Clamps | Product Overview
Features:
•
•
•
•
•
Increased handle clearance reduces pinch points
Common mounting hole pattern to Model 213
Fixed handle pivot provides smooth action
Nearly 2 times the holding capacity Model 213
BLK models feature a black, non-reflective finish
Applications:
•
•
•
•
•
Also Available:
Checking fixtures
Assembly & test
Light machining
Woodworking
Closures
See page MC-ACC-1 for accessories
Accommodates M5 or #10
spindle accessory
Covered under one or more U.S./International Patents
2013-U
Flanged Base
U-Bar

2013-U-LS-BLK
Blackout Series
Flanged Base, U-Bar
2013-UR
Flanged Base, U-Bar
with DESTACO®
Toggle Lock
Plus
This item is available upon request
Technical Information
Accessories (Supplied)
Clamp
Bar Opening
Max. Holding
Capacity
Model
(+10° )
Handle
Opening
Weight
(+10° )
2013-U
2013-U-LS-BLK
1310 N [295 lbf]
71°
58°
0,17kg [0.37lb]
2013-UR

Spindle
Assembly
Flanged
Washers
2013208-M
102111
--
102111-BLK
2013208-M
102111
This item is available upon request
Holding Capacities
Y
EF
EF
HC
2
HC
1
AF
X
X1
X2
Model
X
X1
X2
Y
‡HC1
‡HC2
U/UR
[0.63]
16
[0.95]
24
[1.95]
49,5
[2.34]
59,5
[295lbf.]
1310N
[175lbf.]
780N
‡EF(X1):AF ‡EF(X2):AF
6:1
4:1
Dimensions shown “mm [inch]” ‡ HC = Holding Capacity, EF = Exerting Force, AF = Applied Force
See page MC-TEC-4 for additional information.
MC-HHD-3
Dimensions and technical information are subject to change without notice
­MC-HHD-4
2013 Series
Horizontal Hold Down Clamps | Dimensions | -U/-UR
2013-U
Flanged Base
U-Bar
[0.21]
5,3
[2.65]
67,4
[0.10]
2,6
DESTACO®
TOGGLE LOCK
PLUS OPTION
M5 OR #10-32
[0.75]
19,1
[1.30]
33,1
[0.30]
7,5
RANGE OF
ADJUSTMENT
[0.11]
2,7
[1.65]
42,0
[0.17]
4,3
[1.06]
26,9
[0.03]
0,8
[0.24]
6,1
[1.00]
25,4
[0.70]
17,7
[0.53]
13,5
[5.87]
149,2
Dimensions and technical information are subject to change without notice
MC-HHD-4
mm [INCH]
mm [INCH]
THIRD ANGLE
PROJECTION
FIRST ANGLE
PROJECTION
2017 Series
Horizontal Hold Down Clamps | Product Overview
Features:
•
•
•
•
•
Increased handle clearance reduces pinch points
Common mounting hole pattern to Model 217
Fixed handle pivot provides smooth action
Over 2½ times the holding capacity Model 217
BLK models feature a black, non-reflective finish
Applications:
•
•
•
•
•
Also Available:
Checking fixtures
Assembly & test
Light machining
Woodworking
Closures
See page MC-ACC-1 for accessories
Accommodates M6 or ¼”
spindle accessory
Covered under one or more U.S./International Patents
2017-U
Flanged Base
U-Bar

2017-U-LS-BLK
Blackout Series
Flanged Base
U-Bar
2017-UR
Flanged Base, U-Bar
with DESTACO®
Toggle Lock
Plus
This item is available upon request
Technical Information
Accessories (Supplied)
Clamp Bar
Opening
Max. Holding
Capacity
Model
(+10° )
Handle
Opening
Weight
(+10° )
2017-U
2017-U-LS-BLK
2500 N [560 lbf]
73°
69°
0,44kg [0.97lb]
2017-UR

Spindle
Assembly
Flanged
Washers
215208-M
215105
--
215105-BLK
215208-M
215105
This item is available upon request
Holding Capacities
Y
EF
EF
HC
2
HC
1
AF
X
X1
X2
Model
X
X1
X2
Y
‡HC1
‡HC2
U/UR
[1.08]
27,4
[1.65]
42
[3.15]
80
[2.54]
64,5
[560lbf.]
2500N
[245lbf.]
1090N
‡EF(X1):AF ‡EF(X2):AF
5:1
2.5:1
Dimensions shown “mm [inch]” ‡ HC = Holding Capacity, EF = Exerting Force, AF = Applied Force
See page MC-TEC-4 for additional information.
MC-HHD-5
Dimensions and technical information are subject to change without notice
­MC-HHD-6
2017 Series
Horizontal Hold Down Clamps | Dimensions | -U/-UR
2017-U
Flanged Base
U-Bar
[8.65]
219,7
[0.24]
6,1
[2.20]
55,9
[0.12]
3,0
DESTACO®
TOGGLE LOCK
PLUS OPTION
M6 OR 1/4-20
[0.98]
24,8
[1.95]
49,4
[0.20]
5,0
RANGE OF
ADJUSTMENT
[0.12]
3,0
[2.53]
64,2
[4.21]
106,8
[1.03]
26,2
[0.14]
R3.4
[1.21]
30,8
[1.86]
47,2
[0.32]
8,2
[0.11]
2,8
[1.68]
42,6
Dimensions and technical information are subject to change without notice
MC-HHD-6
mm [INCH]
mm [INCH]
THIRD ANGLE
PROJECTION
FIRST ANGLE
PROJECTION
2027 Series
Horizontal Hold Down Clamps | Product Overview
Features:
•
•
•
•
•
Increased handle clearance reduces pinch points
Common mounting hole pattern to Model 227
Fixed handle pivot provides smooth action
Over 1½ times the holding capacity Model 227
BLK models feature a black, non-reflective finish
Applications:
•
•
•
•
•
Also Available:
Checking fixtures
Assembly & test
Light machining
Woodworking
Closures
See page MC-ACC-1 for accessories
Accommodates M8 or 5/16”
spindle accessory
Covered under one or more U.S./International Patents
2027-U-LS-BLK
Blackout Series
Flanged Base
U-Bar
2027-U
Flanged Base
U-Bar

2027-UR
Flanged Base, U-Bar
with DESTACO®
Toggle Lock
Plus
This item is available upon request
Technical Information
Accessories (Supplied)
Clamp Bar
Opening
Max. Holding
Capacity
Model
(+10° )
Handle
Opening
Weight
(+10° )
2027-U
2027-U-LS-BLK
3740 N [840 lbf]
68°
70°
0,61kg [1.34lb]
2027-UR

Spindle
Assembly
Flanged
Washers
2007208-M
507107
--
507107-BLK
2007208-M
507107
This item is available upon request
Holding Capacities
Y
EF
EF
HC
2
HC
1
AF
X
X1
X2
Model
X
X1
X2
Y
‡HC1
‡HC2
U/UR
[1.02]
25,8
[1.75]
44,5
[3.30]
83,8
[2.54]
64,5
[840lbf.]
3740N
[480lbf.]
2140N
‡EF(X1):AF ‡EF(X2):AF
5:1
3:1
Dimensions shown “mm [inch]” ‡ HC = Holding Capacity, EF = Exerting Force, AF = Applied Force
See page MC-TEC-4 for additional information.
MC-HHD-7
Dimensions and technical information are subject to change without notice
­MC-HHD-8
2027 Series
Horizontal Hold Down Clamps | Dimensions | -U/-UR
2027-U
Flanged Base
U-Bar
[0.33]
8,3
[2.22]
56,4
[0.12]
3,0
DESTACO®
TOGGLE LOCK
PLUS OPTION
M8 OR 5/16-18
[1.32]
33,6
[0.75]
19,1
[2.25]
57,2
[0.28]
7,0
RANGE OF
ADJUSTMENT
[0.16]
4,2
[2.86]
72,7
[4.42]
112,3
[2.86]
72,8
[1.03]
26,2
[1.21]
30,8
[1.81]
45,9
[1.56]
39,6
[0.14]
R 3,4
[9.88]
250,9
Dimensions and technical information are subject to change without notice
MC-HHD-8
[0.11]
2,8
mm [INCH]
mm [INC
THIRD ANGLE
PROJECTION
FIRST ANG
PROJECTIO
213 Series
Horizontal Hold Down Clamps | Product Overview
Features:
•
•
•
•
Low profile
Large handle clearance in the open position
Available in stainless steel
BLK models feature a black, non-reflective finish
Applications:
•
•
•
•
Assembly
Checking fixtures
Closures
Woodworking
Also Available:
See page MC-ACC-1 for accessories
Accommodates M5 or #10
spindle accessory
213-U
Flanged Base
U-Bar
213-U-LS-BLK
Blackout Series
Flanged Base
U-Bar
213-USS
Flanged Base
U-Bar, Stainless
Steel
213-UB
Straight Base
U-Bar
213-U-L
Flanged Base
Open Bar
213-U-L-BLK
Flanged Base
Open Bar
213-UB-L
Straight Base
Open Bar
213-UB-L-BLK
Blackout Series
Straight Base
Open Bar

213-UB-LS-BLK
Blackout Series
Straight Base
U-Bar
This item is available upon request
Technical Information
Accessories (Supplied)
Max. Holding
Capacity
Clamp Bar
Opening
Handle
Opening
Spindle
Assembly
Flanged
Washers
213208-M
102111
--
102111-BLK
213-USS
201943-M
102911
213-UB
213208-M
102111
Model
(+10° )
Weight
(+10° )
213-U
213-U-LS-BLK
213-UB-LS-BLK
670 N [150 lbf]
90°
60°
102111-BLK
0,08kg [0.17lb]
213-U-L
102111
213-U-L-BLK
--
213-UB-L
102111
213-UB-L-BLK

102111-BLK
102111-BLK
This item is available upon request
MC-HHD-9
Dimensions and technical information are subject to change without notice
­MC-HHD-10
213 Series
Horizontal Hold Down Clamps | Holding Capacities
Y
EF
EF
HC
2
HC
1
AF
X
X1
X2
Model
X
U/USS/UB [0.36]
9,3
U-L/UB-L
X1
X2
Y
‡HC1
‡HC2
[0.75]
19
[1.63]
41,4
[1.81]
46
[150lbf.]
670N
[70lbf.]
310N
‡EF(X1):AF ‡EF(X2):AF
7:1
3:1
Dimensions shown “mm [inch]” ‡ HC = Holding Capacity, EF = Exerting Force, AF = Applied Force
See page MC-TEC-4 for additional information.
213-U
Dimensions | -U/-USS/-UB
213-U
Flanged Base
U-Bar
[0.39]
9,8
[0.21]
5,4
[0.85]
21,5
M5 OR #10
IF SUPPLIED
OPENING
[0.37]
9,5
[1.39]
35,3
[0.16]
4,0
Series 213 Open Bar Options
Flanged Base
Model
213-U-L
213_U_L
See page MC-ACC-7 for
Complete offering of
Open bar accessories
[0.21]
5,4
[0.74]
18,8
[1.72]
43,8
[0.92]
23,3
[1.42]
36,0
[0.26]
6,6
RANGE OF
ADJUSTMENT
[0.53]
13,5 [0.75]
19,0
[1.06]
27,0
[0.17]
4,3
[0.23]
5,9
[0.06]
1,5
[1.00]
25,4
[4.05]
102,9
[1.23]
31,2
Straight Base
Model
213-UB-L
[0.25]
213-UB
[2.42]
61,4
[0.85]
21,5
Dimensions and technical information are6,4
subject to change without notice
[0.08]
2,0
MC-HHD-10
mm [INCH]
mm [INCH]
THIRD ANGLE
PROJECTION
FIRST ANGLE
PROJECTION
217 Series
Horizontal Hold Down Clamps | Product Overview
Features:
•
•
•
•
Low profile
Large handle clearance in the open position
Available in stainless steel
BLK models feature a black, non-reflective finish
Applications:
•
•
•
•
Assembly
Checking fixtures
Closures
Woodworking
Also Available:
See page MC-ACC-1 for accessories
Accommodates M6 or ¼”
spindle accessory
217-U
Flanged Base
U-Bar
217-U-LS-BLK
Blackout Series
Flanged Base
U-Bar
217-USS
Flanged Base
U-Bar, Stainless
Steel
217-UB
Straight Base
U-Bar
217-U-L
Flanged Base
Open Bar
217-U-L-BLK
Flanged Base
Open Bar
217-UB-L
Straight Base
Open Bar
217-UB-L-BLK
Blackout Series
Straight Base
Open Bar

217-UB-LS-BLK
Blackout Series
Straight Base
U-Bar
This item is available upon request
Technical Information
Accessories (Supplied)
Model
217-U
Clamp Bar
Opening
Max. Holding
Capacity
(+10° )
Handle
Opening
Weight
(+10° )
900 N [200 lbf]
217-U-LS-BLK
217-USS
1110 N [250 lbf]
217-UB
217-UB-LS-BLK
217-U-L
217-U-L-BLK
91°
900 N [200 lbf]
217-UB-L
Flanged
Washers
202208-M
215105
--
215105-BLK
202943-M
215105
202208-M
215105
215105-BLK
0,18kg [0.40lb]
215105
--
215105-BLK
215105
217-UB-L-BLK

61°
Spindle
Assembly
215105-BLK
This item is available upon request
MC-HHD-11
Dimensions and technical information are subject to change without notice
3_U_L
217_U_L
­MC-HHD-12
217 Series
Horizontal Hold Down Clamps | Holding Capacities
Y
EF
EF
HC
2
HC
1
AF
X
Model
X1
U
X2
X
X1
[0.53]
13,5
USS
X2
[1.13]
28,6
[2.63]
66,8
Y
‡HC1
‡HC2
[2.93]
74,5
[200lbf.]
900N
[250lbf.]
1110N
[200lbf.]
900N
[80lbf.]
360N
[100lbf.]
440N
[80lbf.]
360N
UB/U-L/
UB-L
‡EF(X1):AF ‡EF(X2):AF
7:1
3:1
Dimensions shown “mm [inch]” ‡ HC = Holding Capacity, EF = Exerting Force, AF = Applied Force
See page MC-TEC-4 for additional information.
Dimensions | -U/-USS/-UB
Series 217
Open Bar Options
217-U
Flanged Base
U-Bar
[0.25]
6,4
[1.54]
39,0
[0.56]
14,2
OPENING
M6 OR 1/4
IF SUPPLIED
Flanged Base
Model
217-U-L
[0.49]
12,5
[1.95]
49,6
[2.47]
62,8
[1.23]
31,1
[0.21]
5,4
[0.85]
21,5
Straight Base
Model
[1.23]
217-UB-L
31,2
[0.20]
5,0
[0.19]
Ø 4,8
[1.03]
26,2
[1.55]
39,4
[0.25]
6,4
[1.12]
28,4
[0.52]
13,1
[1.49]
38
mm [INCH]
mm [INCH]
[2.09]
53,2
THIRD ANGLE
PROJECTION
[0.34]
217-UB
[3.76]
95,4
[0.12]
3,0
RANGE OF
ADJUSTMENT
See page MC-ACC-7 for
Complete offering of
Open bar accessories
[0.10]
2,5
[2.30]
58,4
[0.92]
23,4
[0.21]
5,4
FIRST ANGLE
PROJECTION
Dimensions
8,6 and technical information are subject to change without notice
MC-HHD-12
[0.22]
5,5
[1.46]
37,0
[6.58]
167,2
[0.12]
3,0
227 Series
Horizontal Hold Down Clamps | Product Overview
Features:
•
•
•
•
Low profile
Large handle clearance in the open position.
Available in stainless steel
BLK models feature a black, non-reflective finish
Applications:
•
•
•
•
Assembly
Checking fixtures
Closures
Woodworking
Also Available:
See page MC-ACC-1 for accessories
Accommodates M6 or 5/16”
spindle accessory
227-U
Flanged Base
U-Bar
227-U-LS-BLK
Blackout Series
Flanged Base
U-Bar
227-USS
Flanged Base
U-Bar, Stainless
Steel
227-UB
Straight Base
U-Bar
227-U-L
Flanged Base
Open Bar
227-U-L-BLK
Blackout Series
Flanged Base
Open Bar
227-UB-L
Straight Base
Open Bar
227-UB-L-BLK
Blackout Series
Straight Base
Open Bar

227-UB-LS-BLK
Blackout Series
Straight Base
U-Bar
This item is available upon request
Technical Information
Accessories (Supplied)
Model
227-U
227-U-LS-BLK
227-USS
Clamp Bar
Opening
Max. Holding
Capacity
(+10° )
Handle
Opening
Weight
(+10° )
2220 N [500 lbf]
2670 N [600 lbf]
227-UB
227-UB-LS-BLK
227-U-L
227-U-L-BLK
91°
2220 N [500 lbf]
227-UB-L
Flanged
Washers
225208-M
507107
--
507107-BLK
‑207943-M
507907
225208-M
507107
507107-BLK
0,31kg [0.68lb]
507107
--
507107-BLK
507107
227-UB-L-BLK

56°
Spindle
Assembly
507107-BLK
This item is available upon request
MC-HHD-13
Dimensions and technical information are subject to change without notice
­MC-HHD-14
227 Series
Horizontal Hold Down Clamps | Holding Capacities
Y
EF
EF
HC
2
HC
1
AF
X
X1
X2
Model
X
X1
X2
Y
‡HC1
‡HC2
[3.58]
91,0
[500lbf.]
2220N
[600lbf.]
2670N
500lbf.]
2220N
[225lbf.]
1000N
[270lbf.]
1200N
[225lbf.]
1000N
U
[0.39]
10,0
USS
[1.25]
31,8
[2.75]
70,0
UB/U-L/
UB-L
‡EF(X1):AF ‡EF(X2):AF
8:1
3:1
Dimensions shown “mm [inch]” ‡ HC = Holding Capacity, EF = Exerting Force, AF = Applied Force
See page MC-TEC-4 for additional information.
[0.21]
5,4
227-U
Flanged
Base
213_U_L
U-Bar
Dimensions | -U/-USS/-UB
[1.54]
39,1
[0.85]
21,5
[1.23]
31,2
[0.33]
8,4
M8 OR 5/16
IF SUPPLIED
Series 227 Open Bar Options
[0.25]
6,4
217_U_L
[0.56]
14,3
[1.49]
38
[2.40]
61,1
[2.09]
53,2
See page MC-ACC-7 for
Complete offering of
Open bar accessories
Flanged Base
Model
227-U-L
227_U_L
[2.96]
75,3
OPENING
[1.25]
31,8
[1.55]
39,3
[0.24]
6,0
[0.16]
4,0
RANGE OF
ADJUSTMENT
[0.34]
8,6
[1.49]
37,7
[0.83]
21,2
[4.23]
107,3
[8.38]
212,8
[0.19]
Ø 4,8
[2.39]
60,7
[0.12]
3,0
[2.65]
67,2
[1.02]
26,0 [1.24]
31,6
[1.74]
44,2
[4.43]
112,5
[0.26]
6,6
[0.28]
7,0
mm [INCH]
Straight Base
Model
227-UB-L
Dimensions and technical information are subject to change without notice
mm [INCH]
[0.26]
6,6
[1.57]
40,0
THIRD ANGLE
PROJECTION
FIRST ANGLE
PROJECTION
MC-HHD-14
[7.48]
189,9
[0.10]
2,5
237 Series
Horizontal Hold Down Clamps | Product Overview
Features:
Applications:
• Low profile
• Large handle clearance in the open position.
• Available in stainless steel
237-U
Flanged Base
U-Bar
• Assembly
• Checking fixtures
• Welding
Also Available:
See page MC-ACC-1 for accessories
Accommodates M10 or 3/8”
spindle accessory
237-USS
Flanged Base
U-Bar, Stainless
Steel
Technical Information
Accessories (Supplied)
Max. Holding
Capacity
Model
237-U
3340 N [750 lbf]
237-USS
3780 N [850 lbf]

Clamp Bar
Opening(+10° )
Handle
Opening
Weight
93°
59°
0,73kg [1.60lb]
(+10° )
Spindle
Assembly
Flanged
Washers
240208-M
235106
237943-M
235906
This item is available upon request
Holding Capacities
Y
EF
EF
HC
2
HC
1
AF
X
X1
X2
Model
U
USS
X
X1
X2
Y
[0.81]
20,6
[1.75]
44,5
[4.50]
114,3
[5.25]
133,3
‡HC1
‡HC2
[750lbf.]
3340N
[850lbf.]
3780N
[290lbf.]
1290N
[330lbf.]
1470N
‡EF(X1):AF ‡EF(X2):AF
6:1
2:1
Dimensions shown “mm [inch]” ‡ HC = Holding Capacity, EF = Exerting Force, AF = Applied Force
See page MC-TEC-4 for additional information.
MC-HHD-15
Dimensions and technical information are subject to change without notice
­MC-HHD-16
237 Series
Horizontal Hold Down Clamps | Dimensions | -U/-USS
237-U
Flanged Base
U-Bar
[0.42]
10,6
[2.76]
70,0
[0.97]
24,6
OPENING
M10 OR 3/8
IF SUPPLIED
[0.75]
19,0
[3.18]
80,8
[1.75]
44,5
[0.43]
11,0
RANGE OF
ADJUSTMENT
[0.16]
4,0
[3.98]
101,1
[6.23]
158,1
[11.02]
280,0
[3.98]
101,1
[1.61]
41,0
[0.23]
Ø 5,8
[0.08]
2,0
[2.28]
58,0
[1.69]
43,0
[0.31]
8,0
[0.81]
20,5
Dimensions and technical information are subject to change without notice
[0.35]
8,8
[2.24]
57,0
MC-HHD-16
mm [INCH]
mm [INCH]
THIRD ANGLE
PROJECTION
FIRST ANGLE
PROJECTION
245 Series
Horizontal Hold Down Clamps | Product Overview
Features:
Applications:
• Low profile
• Large handle clearance in the open position.
• Assembly
• Checking fixtures
• Welding
Also Available:
See page MC-ACC-1 for accessories
Accommodates M12 or 1/2”
spindle accessory
245-U
Flanged Base
U-Bar
Technical Information
Accessories (Supplied)
Max. Holding
Capacity
Model
245-U
4450 N [1000 lbf]
Clamp Bar
Opening
Handle
Opening
Weight
Spindle
Assembly
Flanged
Washers
105°
74°
1,32kg [2.90lb]
247208-M
247109
(+10° )
(+10° )
Holding Capacities
Y
EF
EF
HC
2
HC
1
AF
X
X1
X2
Model
U
X
[0.50]
12,7
X1
[2.00]
50,8
X2
[5.00]
127
Y
[6.09]
154,7
‡HC1
‡HC2
[1000lbf.]
4450N
[400lbf.]
1780N
‡EF(X1):AF ‡EF(X2):AF
11:1
5:1
Dimensions shown “mm [inch]” ‡ HC = Holding Capacity, EF = Exerting Force, AF = Applied Force
See page MC-TEC-4 for additional information.
MC-HHD-17
Dimensions and technical information are subject to change without notice
­MC-HHD-18
245 Series
Horizontal Hold Down Clamps | Dimensions
245-U
Flanged Base
U-Bar
[3.20]
81,3
[0.53]
13,5
[1.37]
34,7
OPENING
M12 OR 1/4
IF SUPPLIED
[1.00]
25,4
[4.24]
107,8
[2.19]
55,5
[0.31]
8,0
RANGE OF
ADJUSTMENT
[0.19]
4,7
[4.87]
123,6
[7.49]
190,3
[4.87]
123,6
[1.63]
41,3
[2.62]
66,6
[1.62]
41,2
[2.63]
66,7
[12.23]
310,6
Dimensions and technical information are subject to change without notice
mm [INCH]
mm [INCH]
THIRD ANGLE
PROJECTION
FIRST ANGLE
PROJECTION
[0.34]
Ø 8,7
[0.50]
12,7
MC-HHD-18
205 Series
Horizontal Hold Down Clamps | Product Overview
Features:
• Smallest of the Horizontal Hold Down clamps
• Ideal for light duty clamping in tight spaces
• Stainless steel models furnished without
plastic grip
Applications:
•
•
•
•
Also Available:
Assembly
Closures
Woodworking
Light duty
clamping
See page MC-ACC-1 for accessories
Accommodates M4 or #8
spindle accessory
205-U
Flanged Base
U-Bar
205-UB 
Straight Base
U-Bar
205-UL
Left Flanged
Base, U-Bar
205-UR
Right Flanged
Base, U-Bar
205-USS
Flanged Base
U-Bar, Stainless
Steel
205-S
Flanged Base
Solid Bar
205-SB
Straight Base
Solid Bar
205-SL
Left Flanged Base,
Solid Bar
205-SR
Right Flanged
Base, Solid Bar
205-SSS
Flanged Base
Solid Bar, Stainless
Steel
Technical Information
Accessories (Supplied)
Model
Max. Holding
Capacity
Clamp Bar
Opening
Handle
Opening
90°
80°
(+10° )
Weight
(+10° )
Spindle
Assembly
Flanged
Washers
205208-M
105106
205943-M
105906
205-U
205-UB
205-UL
270N [60 lbf]
205-UR
205-USS
340N [75 lbf]
0,03kg [0.06lb]
205-S
205-SB
205-SL
270N [60 lbf]
94°
82°
205208-M
--
205-SR
205-SSS

340N [75 lbf]
205943-M
This item is available upon request
MC-HHD-19
Dimensions and technical information are subject to change without notice
­MC-HHD-20
205 Series
Horizontal Hold Down Clamps | Holding Capacities
Y
EF
EF
HC
2
HC
1
AF
X
Model
X1
X2
X
U
USS
S
X1
X2
Y
[0.43]
11
[0.22]
5,6
[0.81]
20,5
[1.31]
33,2
‡HC1
‡HC2
[60lbf.]
270N
[75lbf.]
340N
[50lbf.]
220N
[65lbf.]
290N
[60lbf.]
270N
[75lbf.]
340N
--
--
SSS
‡EF(X1):AF ‡EF(X2):AF
9:1
5:1
--
4:1
Dimensions shown “mm [inch]” ‡ HC = Holding Capacity, EF = Exerting Force, AF = Applied Force
See page MC-TEC-4 for additional information.
Dimensions | -U/-UB/-UL-/-UR/-USS/-S/-SB/-SL/-SR/-SSS
[2.71]
68,8
205-U
Flanged Base
U-Bar
[0.37]
9,5
[0.18]
4,6
[0.21]
5,5
M4 OR #8
IF SUPPLIED
[0.25]
6,3
[0.30]
7,5
[0.06]
1,5
[0.12]
3,0
[0.95]
24,1
205-S
Flanged Base
Solid Bar
OPENING
[0.06]
1,5
RANGE OF
ADJUSTMENT
[0.67]
17,1
[0.09]
2,4
[0.16]
4,0
[0.73]
18,6
[0.63]
16,0
[1.68]
42,6
[0.62]
15,8
[0.17]
Ø 4,3
[0.95]
24,1
[0.62]
15,8
[0.09]
2,4
[2.85]
72,5
Dimensions and technical information are subject to change without notice
[0.06]
1,5
MC-HHD-20
[0.08]
R 2,2
mm [INCH]
mm [INCH]
THIRD ANGLE
PROJECTION
FIRST ANGLE
PROJECTION
215 Series
Horizontal Hold Down Clamps | Product Overview
Features:
Applications:
• Low profile
• Stainless steel model furnished without
plastic grip
215-U
Flanged Base
U-Bar
•
•
•
•
Assembly
Checking fixtures
Closures
Woodworking
Also Available:
See page MC-ACC-1 for accessories
Accommodates M6 or ¼”
spindle accessory
215-UB
Straight Base
U-Bar
215-USS
Flanged Base
U-Bar, Stainless
Steel
215-S
Flanged Base
Solid Bar
Technical Information
Accessories (Supplied)
Max. Holding
Capacity
Model
215-U
(+10° )
Handle
Opening
Weight
(+10° )
890 N [200 lbf]
215-USS
1110 N [250 lbf]
215-UB
87°
0,15kg
[0.34lb]
78°
890 N [200 lbf]
215-S

Clamp Bar
Opening
Spindle
Assembly
Flanged
Washers
202208-M
215105
202943-M
215905
202208-M
215105
--
--
Bolt
Retainer
--
205105
This item is available upon request
Holding Capacities
Y
EF
EF
HC
2
HC
1
AF
X
X1
X2
Model
X
U/UB
USS
S
[0.22]
5,6
X1
[1.00]
25,4
[1.63]
41,4
X2
[2.25]
57
[2.88]
73
Y
‡HC1
‡HC2
[80lbf.]
360N
[2.72]
69
[200lbf.]
890N
[250lbf.]
1110N
[200lbf.]
890N
[110lbf.]
490N
‡EF(X1):AF ‡EF(X2):AF
9:1
4:1
6:1
Dimensions shown “mm [inch]” ‡ HC = Holding Capacity, EF = Exerting Force, AF = Applied Force
See page MC-TEC-4 for additional information.
MC-HHD-21
Dimensions and technical information are subject to change without notice
­MC-HHD-22
215 Series
Horizontal Hold Down Clamps | Dimensions | -U/-USS/-UB/-S
215-U
Flanged Base
U-Bar
[1.26]
32,0
[0.28]
7,0
M6 OR 1/4
IF SUPPLIED
[0.78]
19,7
OPENING
[0.50]
12,7
[1.00]
25,5
[1.53]
38,9
[1.41]
35,8
[0.20]
5,0
215-S
Flanged Base
Solid Bar
[0.26]
6,6
RANGE OF
ADJUSTMENT
[0.10]
2,5
[2.25]
57,1
[3.68]
93,5
215-UB
[2.23]
56,6
[0.28]
Ø 7,2
[1.06]
27,0
[0.20]
5,2
[1.38]
35,0
[0.24]
6,0
[0.19]
4,8
[0.87]
22,0
mm [INCH]
mm [INCH]
THIRD ANGLE
PROJECTION
FIRST ANGLE
PROJECTION
[0.03]
0,8
[1.43]
36,4
[5.46]
138,6
Dimensions and technical information are subject to change without notice
MC-HHD-22
225 Series
Horizontal Hold Down Clamps | Product Overview
Features:
• Low profile
• Stainless steel model furnished without
­­plastic grip
• Available with DESTACO® Toggle Lock Plus
Applications:
•
•
•
•
Assembly
Checking fixtures
Closures
Woodworking
Also Available:
See page MC-ACC-1 for accessories
Accommodates M8 or 5/16”
spindle accessory
Covered under one or more U.S./International Patents
225-U
Flanged Base
U-Bar
225-USS
Flanged Base, U-Bar,
Stainless Steel
225-UR
Flanged Base, U-Bar
with DESTACO®
Toggle Lock
Plus
225-UB
Straight Base
U Bar
225-UBSS
Straight Base, U Bar,
Stainless Steel
Technical Information
Accessories (Supplied)
Model
Max. Holding
Capacity
225-U
2220 N [500 lbf]
225-USS
2670 N [600 lbf]
225-UR
225-UB
225-UBSS­­

2220 N [500 lbf]
Clamp Bar
Opening
(+10° )
Handle
Opening
Weight
(+10° )
0,25kg [0.55lb]
92°
70°
0,31kg [0.69lb]
0,25kg [0.55lb]
2670 N [600 lbf]
Spindle
Assembly
Flanged
Washers
225208-M
507107
207943-M
507907
225208-M
507107
207943-M
507907
This item is available upon request
MC-HHD-23
Dimensions and technical information are subject to change without notice
­MC-HHD-24
225 Series
Horizontal Hold Down Clamps | Holding Capacities
Y
EF
EF
AF
HC
2
HC
1
X
Model
X1
X2
X
X1
X2
Y
‡HC1
‡HC2
[3.56]
90,4
[500lbf.]
2220N
[600lbf.]
2760N
[500lbf.]
2220N
[600lbf.]
2760N
[250lbf.]
1110N
[300lbf.]
1340N
[250lbf.]
1110N
[300lbf.]
1340N
U
USS
UR/UB
[0.12]
3,0
[1.25]
31,8
[2.50]
63,5
UBSS
‡EF(X1):AF ‡EF(X2):AF
12:1
5:1
Dimensions shown “mm [inch]” ‡ HC = Holding Capacity, EF = Exerting Force, AF = Applied Force
See page MC-TEC-4 for additional information.
Dimensions | -U/-USS-/UB/-UBSS
Dimensions | -UR
[4.63]
117,7
[1.38]
35,0
[0.33]
8,4
[1.08]
27,4
M8 OR 5/16
IF SUPPLIED
[1.08]
27,5
OPENING
[1.57]
39,9
[0.50]
12,7
[1.31]
33,2
[0.24]
6,0
[1.84]
46,8
[2.69]
68,2
[1.56]
39,6
[0.12]
3,0
[4.18]
106,2
[0.28]
7,0
RANGE OF
ADJUSTMENT
225-U
Flanged Base
U-Bar
[1.38]
35,0
[1.00]
25,4
[1.37]
34,9
[0.25]
6,3
[1.50]
38,0
[0.26]
6,7
[0.87]
22,2
M8 or 5/16
IF SUPPLIED
DESTACO®
TOGGLE LOCK
PLUS
[0.50]
12,7
[1.89]
48,0
[1.29]
32,9
[0.18]
4,5
RANGE OF
ADJUSTMENT
[0.21]
5,4
[2.69]
68,2
[4.18]
106,2
[1.50]
38,0
[1.37]
34,9
[0.25]
6,3
[0.94]
24,0
[7.09]
180,0
MC-HHD-24
[0.88]
22,4
[0.26]
Ø 6,6
[1.00]
25,4
[6.91]
175,5
Dimensions and technical information are subject to change without notice
OPENING
mm [INCH]
mm
THIRD ANGLE
PROJECTION
FIRST
PROJE
235 Series
Horizontal Hold Down Clamps | Product Overview
Features:
Applications:
• Low profile
• Available with DESTACO® Toggle Lock Plus
• Available in stainless steel
•
•
•
•
•
Assembly
Checking fixtures
Welding
Closures
Woodworking
Also Available:
See page MC-ACC-1 for accessories
Accommodates M10 or 3/8”
spindle accessory
Covered under one or more U.S./International Patents
235-U
Flanged Base
U-Bar
235-UR
Flanged Base, U-Bar
235-USS
Flanged Base, U-Bar,
Stainless Steel
235-UB
Straight Base
U-Bar
with DESTACO®
Toggle Lock
Plus
Technical Information
Accessories (Supplied)
Max. Holding
Capacity
Model
235-U
3340 N [750 lbf]
235-USS
3780 N [850 lbf]
235-UR
(+10° )
Handle
Opening
Weight
(+10° )
0,67kg [1.47lb]
92°
70°
3340 N [750 lbf]
235-UB

Clamp Bar
Opening
0,74kg [1.64lb]
0,67kg [1.47lb]
Spindle
Assembly
Flanged
Washers
240208-M
235106
237943-M
235906
240208-M
235106
This item is available upon request
Holding Capacities
Y
EF
EF
HC
2
HC
1
AF
X
X1
X2
Model
X
X1
X2
Y
‡HC1
‡HC2
[5.75]
146
[750lbf.]
3340N
[850lbf.]
3780N
[750lbf.]
3340N
[300lbf.]
1330N
[360lbf.]
1600N
[300lbf.]
1330N
U
USS
[0.25]
6,4
[1.75]
44,5
UR/UB
[4.13]
105
‡EF(X1):AF ‡EF(X2):AF
9:1
5:1
Dimensions shown “mm [inch]” ‡ HC = Holding Capacity, EF = Exerting Force, AF = Applied Force
See page MC-TEC-4 for additional information.
MC-HHD-25
Dimensions and technical information are subject to change without notice
­MC-HHD-26
235 Series
Horizontal Hold Down Clamps | Dimensions | -U/-USS-/UR-/UB
235-U
Flanged Base
U-Bar
[2.40]
61
[0.44]
11,1
[1.60]
40,7
M10 OR 3/8
IF SUPPLIED
[0.75]
19,1
92°
70°
[2.09]
53,2
[0.31]
8
[0.45]
11.3
RANGE OF
ADJUSTMENT
[Ø 0.33]
Ø 8,4
[1.75]
44,4
[4.16]
105,6
[1.63]
41,3
Dimensions | -UR
2.26
57,3
[2.32]
59,0
[0.44]
11,1
M10 OR 3/8
IF SUPPLIED
[1.63]
41,3
[0.31]
8
[2.25]
57,2
[1.60]
40,6
[0.33]
Ø8,4
[10.70]
271,4
OPENING
DESTACO®
TOGGLE LOCK
PLUS
[0.75]
19,0
[2.56]
64,9
[1.70]
43,3
[0.47]
12,0
RANGE OF
ADJUSTMENT
[2.25]
57,2
[1.63]
41,3
[0.22]
5,5
[4.16]
105,6
[6.41]
162,8
[1.63]
41,3
[2.26]
57,3
[1.63]
41,3
[0.31]
8,0
[2.25]
57,2
[0.33]
Ø 8,4
235-UR
Flanged Base, U-Bar
with DESTACO®
Toggle Lock
Plus
[10.50]
266,7
Dimensions and technical information are subject to change without notice
MC-HHD-26
mm [INCH]
mm [INC
THIRD ANGLE
PROJECTION
FIRST ANG
PROJECTIO
305, 307, 309 Series
Horizontal Hold Down Clamps | Product Overview
Features:
Applications:
•C
ompact design suitable for use in
confined spaces
• Available with DESTACO® Toggle Lock Plus
• Stainless steel models available
305-U
Flanged Base
U-Bar
305-USS
Flanged Base
U-Bar, Stainless
Steel
307-UR
Flanged Base,
U-Bar with
309-U
Flanged Base
U-Bar
DESTACO®
Toggle
Lock
Plus
•
•
•
•
Assembly & Test
Light Machining
Closures
Woodworking
Also Available:
See page MC-ACC-1 for accessories
305-UR
Flanged Base,
U-Bar with
307-U
Flanged Base
U-Bar
309-USS
Flanged Base
U-Bar, Stainless
Steel
309-UR
Flanged Base,
U-Bar with
DESTACO®
Toggle
Lock
Plus
307-USS
Flanged Base
U-Bar, Stainless
Steel
DESTACO®
Toggle
Lock
Plus
Technical Information
Accessories (Supplied)
Model
Max. Holding
Capacity
305-U
670 N [150 lbf]
305-USS
900 N [200 lbf]
305-UR
670 N [150 lbf]
Clamp Bar
Opening
(+10° )
90°
Handle
Opening
Weight
(+10° )
170°
0,06kg [0.13lb]
307-U
307-USS
1560 N [350 lbf]
92°
173°
0,24kg [0.54lb]
307-UR
309-U
309-USS
3340 N [750 lbf]
90°
309-UR

168°
1,30kg [0.59lb]
Spindle
Assembly
Flanged
Washers
305208-M
102111
201943-M
102911
305208-M
102111
307208-M
507107
207943-M
507907
307208-M
507107
309208
235106
237943-M
235906
309208
235106
This item is available upon request
MC-HHD-27
Dimensions and technical information are subject to change without notice
­MC-HHD-28
305, 307, 309 Series
Horizontal Hold Down Clamps | Holding Capacities
Y
Model
AF
EF
EF
HC
2
HC
1
X
305-U/UR
X2
X2
[0.58]
14,6
[1.38]
35
307[0.94]
24
U/UR/USS
309[1.34]
34
U/UR/USS
[1.88]
47,7
[2.50]
63,5
305-USS
X
X1
X1
Y
‡HC1
[150lbf.]
670N
[1.88] [1.14]
47,7
29
[200lbf.]
900N
[2.50] [1.77] [350lbf.]
63,5
45
1560N
[3.50] [2.70] [750lbf.]
89305_307_309
68,5
3340N
‡HC2
‡EF(X1):AF ‡EF(X2):AF
[110lbf.]
490N
[150lbf.]
670N
[260lbf.]
1160N
[530lbf.]
2360N
3:1
2:1
4:1
Dimensions shown “mm [inch]” ‡ HC = Holding Capacity, EF = Exerting Force, AF = Applied Force
See page MC-TEC-4 for additional information.
Dimensions | -U/-USS/-UR
305-U
Flanged Base
U-Bar
L3
F
L2
OPENING
DESTACO®
TOGGLE LOCK
PLUS
"M"
IF SUPPLIED
C1
H
C
C2
"E"
RANGE OF
ADJUSTMENT
307-UR
Flanged Base,
U-Bar with
L1
L
DESTACO®
Toggle
Lock
Plus
B
A3
A
B1
ØD
A1
Model
A
A1
A3
B
B1
C
C1
C2
D
E
F
H
L
L1
mm [INCH]
mm [INCH]
THIRD ANGLE
PROJECTION
FIRST ANGLE
PROJECTION
L2
L3
[0.53] [1.035] [0.25] [0.63] [1.02] [0.48] [0.31] [0.08] [0.18] [0.31] [0.21] [1.43] [2.21] [1.19] [0.51] [0.50]
305-U/UR 13,5
26,3
6,4
16,0 25,9 12,2
7,9
2,0
4,6
8
5,3
36,3 56,1 30,2 13,0 12,7
M
[#10]
M5
307-U/UR
[0.91]
23,1
[1.72]
43,7
[0.40] [1.14] [1.80] [0.89] [0.50] [0.12] [0.28] [0.37] [0.33] [2.36] [3.61] [1.89] [0.86] [0.75]
10,2 29,0 45,7 22,6 12,7
3,0
7,1
9.5
8,4
59,9 91,7 48,0 21,8 19,1
309-U/UR
[1.38]
35,1
[2.52]
64,0
[0.58] [1.50] [2.47] [1.31] [0.75] [0.12] [0.33] [0.72] [0.44] [3.53] [5.19] [2.68] [1.28] [1.06] [3/8-16]
14,7 38,1 62,7 33,3 19,1
3,0
8,4
18.5 10,4 89,7 131,8 68,1 32,5 26,9
M10
Dimensions and technical information are subject to change without notice
MC-HHD-28
[5/16]
M8
206 Series
Horizontal Hold Down Clamps | Product Overview
Features:
• All stainless steel construction
• Offers good bar clearance under clamping
bar while maintaining low profile
­­­
206-SS
Flanged Base
Low U-Bar,
Stainless Steel
Applications:
• Assembly
• Chemical
processing
• Closures
• Light duty
clamping
Also Available:
See page MC-ACC-1 for accessories
Accommodates M4 or #8
spindle accessory
206-HSS
Flanged Base
High U-Bar,
Stainless Steel
Technical Information
Accessories (Supplied)
Model
206-SS
206-HSS
Max. Holding
Capacity
440 N [100 lbf]
Clamp Bar
Opening
Handle
Opening
Weight
Spindle
Assembly
Flanged
Washers
90°
90°
0,03kg [0.07lb]
205943-M
105906
(+10° )
(+10° )
Model 206-HSS shown securing a platen on a prototyping machine.
MC-HHD-29
Dimensions and technical information are subject to change without notice
­MC-HHD-30
206 Series
Horizontal Hold Down Clamps | Holding Capacities
Y
EF
EF
HC
2
HC
1
AF
X
X1
X2
Model
X
X1
X2
Y
‡HC1
‡HC2
SS/HSS
[0.20]
5
[0.43]
11
[1.06]
27
[1.14]
29
[100lbf.]
440N
[50lbf.]
220N
‡EF(X1):AF ‡EF(X2):AF
5:1
3:1
Dimensions shown “mm [inch]” ‡ HC = Holding Capacity, EF = Exerting Force, AF = Applied Force
See page MC-TEC-4 for additional information.
Dimensions | -SS/-HSS
[0.35]
8,8
[0.22]
5,5
[0.45]
11,5
OPENING
M4 OR #8
IF SUPPLIED
[1.06]
27,0
[0.31]
8,0
[0.76]
19,2
"HSS"
[0.05]
1,2
[0.44]
11,3
"SS"
[0.95]
24,2
[1.89]
48,1
[0.63]
15,9
[0.94]
23,8
[0.63]
15,9
[0.16]
4,0
[0.09]
2,4
[0.94]
23,9
[2.74]
69,7
Dimensions and technical information are subject to change without notice
MC-HHD-30
mm [INCH]
mm [INCH]
THIRD ANGLE
PROJECTION
FIRST ANGLE
PROJECTION
5305, 5310 Series
Heavy Duty Horizontal Hold Down Clamps | Product Overview
Applications:
Features:
•S
olid clamping arm may be modified to
• Welding fixtures
suit requirements
• Assembly fixtures
• Hardened steel pivot pins and bushings
• Light machining
provide long life
• Black oxide finish
• DESTACO® Toggle Lock Plus versions available†
5305/5310
Flanged Base
5305-B/5310-B
Soild
Base
5305-R/5310-R
Flanged Base
with
DESTACO®
Toggle Lock
Plus
5305-BR/5310-BR
Solid Base
with
DESTACO®
Toggle Lock
Plus
Technical Information
Model
Max. Holding Clamp Bar
Opening
Capacity
(+10° )
Handle
Opening
5305
5305-B
5305-R
Weight
(+10° )
[1.08lbs] 0,49kg
[600lbf.]
2670N
90°
69°
[0.82lbs] 0,37kg
[1.09lbs] 0,49kg
5305-BR
[0.83lbs] 0,37kg
5310
[2.84lbs] 1,29kg
5310-B
5310-R
[1300lbf.]
5780N
90°
69°
5310-BR
[2.24lbs] 1,02kg
[2.87lbs] 1,30kg
[2.27lbs] 1,03kg

†
This item is available upon request.
Toggle Lock Plus locks the handle in the closed position only.
MC-HHD-31
Dimensions and technical information are subject to change without notice
­MC-HHD-32
5305, 5310 Series
Heavy Duty Horizontal Hold Down Clamps | Dimensions
OPENING
ANGLE
HANDLE
OPENING
C1
H
C
B
A2
A3
C2
B1
B2
DESTACO®
TOGGLE LOCK
PLUS OPTION
A4
A5
F
mm [INCH]
mm [INCH]
ØD
THIRD ANGLE
PROJECTION
Model
5305
5305-R
5310
5310-R
A
A2
A3
A4
A5
FIRST ANGLE
PROJECTION
B
B1
L
B2
C
C1
C2
D
F
H
L
-[2.50] [3.15] [2.12] [2.75] [4.63] [5.27] [0.79] [0.98]
[0.81] [0.51] [0.31] [0.35] [0.51] [1.51] [8.36]
63,5 80,0 53,8 69,9 117,6 133,9 20,1 24,9 [1.84] 20,6 13,0
7,9
8,9
13,0 38,4 212,4
46,7
[11.13]
-[3.63] [4.63] [2.63] [3.63] [6.25] [7.25] [1.13] [1.50]
[1.00] [0.75] [0.31] [0.41] [0.79] [2.00] 282,6
92,2 117,6 66,8 92,2 158,8 184,2 28,7 38,1 [2.31] 25,4 19,1
7,9
10,4 20,1 50,8 [11.02]
58,7
279,8
Model
5305-B
5305-BR
5310-B
5310-BR

A1
A
A1
A3
A4
B2
C
C1
F
H
L
-[2.75] [4.63]
[0.81] [0.51] [0.51] [1.51] [8.36]
69,9 117,6 [1.84] 20,6 13,0 13,0 38,4 212,4
46,7
[11.13]
-[3.63] [6.25]
[1.00] [0.75] [0.79] [2.00] 282,6
92,2 158,8 [2.31] 25,4 19,1 20,1 50,8 [11.02]
58,7
279,8
This item is available upon request
Dimensions and technical information are subject to change without notice
MC-HHD-32