WET LOCATION SPECIFICATION GRADE TROFFER (2X4)
WLA/WFLA
PRODUCT HIGHLIGHTS
• Extra-high efficiency
• Optimum
lamp spacing for uniform light
distribution
• One piece long life-heavy duty neoprene
gasketing minimizes dust and dirt as
well as water infiltration. Regressed
aluminum door standard
• Integral EQ grid clips
APPLICATION - Recessed grid or flanged
troffer. UL listed for wet locations under
covered ceilings. Ideal for: kitchens,
bathrooms, showers, outdoor canopies.
DIMENSIONS
CONSTRUCTION - Housing/end sections
constructed of structurally embossed,
22-gauge, cold rolled steel. Wire way
covers snap in for easy attachment/
removal. Access plate provided as
standard for flexible conduit attachment.
Corrosion resistant-recessed aluminum
door with spring loaded latches and “T”
hinges can be inserted from either side
ELECTRICAL - All devices UL/CUL listed.
Suitable for damp or wet locations.
Damp location emergency pack is
standard when specified. Ballasts are
energy saving, solid-state electronic.
Ballasts and lampholders replaceable
without removing from ceiling. Discrete
voltage must be specified for emergency
pack options when wired with flex.
Where lamps are included as part of the
fixture, lamp CRI and color temperature
must be specified.
FINISH - All metal parts painted after
fabrication following treatment with
phosphate rust inhibitor. Finish coating
of housing reflecting surfaces is with
white, high reflectance (minimum 92%)
polyester powder.
ARRA
Funding Compliant
PHOTOMETRICS - Please visit our web site
at www.lsi-industries.com for detailed
photometric data.
LUMINAIRE ORDERING INFORMATION
WL A125 INV
TYPICAL ORDER EXAMPLE:
Prefix
Shielding
Lamps
WL - Grid
A - Pattern 12
Acrylic
WFL - Flanged A125 - Pattern 12
Acrylic .125
ACL - .125 Clear
Acrylic
PCL - .125 Clear
Polycarbonate
19 - Pattern 19
Acrylic
1
2
3
4
62
Lamp Type
2 32
Doors
GRA SSO10 LM835 UE
Ballasts
32 - 32W 48" T8
GRA - Regressed aluminum SS5R - T5 Programmed Start
28 - 28W 45" T5
door with spring loaded SS5D - T5 Dimming (specify type)
SS5HO - T5HO
54 - 54W 45" T5HO
latches
SSOD - T8 Dimming (specify type)
SSOL - T8 Low Watt
SSOHL- T8 High Ballast Factor
SSOHLR- T8 Program Start High Ballast
Factor
SSOR - T8 Programmed Start
SSO10 - T8 <10% THD Instant Start
Insert "INV" behind lens
option if inverted lens is
required
Options
Voltage
F - Fusing
FC1 - 6’ 3/8” flex, 3 #18 leads (other types available)
MA/AUX - Master / Auxiliary
JP - Job Packed
LM - Lamps installed (specify)
EMDL - Emergency Pack Damp Location
MWS - Silver interior reflector
NYC - 20 GA. Housing
CEE - CEE Approved Components installed
120 - 120V
277 - 277V
347 - 347V
UE Universal
Electronic
(120-277V)
(For dual ballasts add “2” Example: SSO2)
I N DOOR
FOOTNOTES:
1 - See the Flanged Troffer Mounting Data section for details.
2 - Not available in 54W T5HO or T8 SSOHL version.
Project Name
408
Catalog #
Fixture Type
10/22/15
© 2015
LSI INDUSTRIES INC.