HEROS
Cu/Fe motors
When incinerator bottom ash is reprocessed, ferrous and non-ferrous metals are recovered.
The ferrous scrap is then cleaned and sorted by size and type, resulting in different clean
fractions of scrap. This process also yields by-products such as motors.
By means of manual sorting the motors are separated clean, in two types.
Technical data
Dimensions:
approx. 40 to 150 mm
Fe purity:
approx. 78 - 83%
Other:
approx. 14 - 16% Cu
Relative density (bulk):
approx. 1.4 t/m3
EWL code:
19.12.03
Basel code:
B1010
Contact
For further information, questions or advice contact:
Heros Sluiskil B.V.
Heros is a certified member of the MRF.
Oostkade 5 – 4541 HH Sluiskil PO Box 1 – 4540 AA Sluiskil Port number 1225 E: info@heros.nl
T: +31(0) 115 – 471 258
I: www.heros.nl
12-2013 rev. 003
All processes at Heros have been
ISO 9001 and ISO 14001 certified by Kiwa