SEMI-FLUSH MOUNT

advertisement
SEMI-FLUSH
MOUNT
EC
LA
IR A
RS
TING & FANS
LIGH
G E S & VE N T I L A T
EU
QUESTIONS OR CONCERNS CONTACT CANARM AT:
1-800-265-1833 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
!
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
ISF529A03CH
12/13
TOOLS AND MATERIALS REQUIRED:
Phillips
Screwdriver
Wire Cutters
Pliers
Wrench
Wiring supplies
as required by
electrical code
SAFETY PRECAUTIONS:
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
3. CAUTION – RISK OF FIRE. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT
CONDUCTOR.
4. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND
WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL OUTLET BOX.
INSTALLATION:
Canopy
fixture. Screw the canopy to
the stem.
Rod
“B”
4.
1. Screw the stem into the
House supply
Ground wire
Black
Fixture
Ground wire
White
2.
Fixture
Loosen “B”. Adjust stud to
desired length and lock in place with
“B”.
Star
Washer
Studs
Outlet
Box
Ground
Wire
Mounting
Bracket
Outlet Box Screws
(not included)
3.
Mount the mounting bracket
to outlet box using outlet box screws
(not included). Make sure the studs
or nipple on the mounting bracket
are facing out from the outlet box.
Stud
Or
Nipple
Cap
Nut
Bulb
Connect the ground wires
(bare copper or green) from your
fixture to the ground wires (bare
copper or green) or ground screw in
the electrical outlet box. Connect
black wire from fixture to black wire
in outlet box and connect the white
wire from fixture to white wire in
outlet box.
5. Once connections of wires
are completed, carefully tuck wires
and wire nuts into the outlet box
making sure no bare wire (on the
black and white) is visible at the
wire nuts. Install the light fixture
to the ceiling by aligning the
hole(s) in the fixture with the
studs or nipple on the mounting
bracket. Secure in place with cap
nut(s) and star washer (s).
6.
Install proper bulb type and
wattage(not included).
Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: (613) 342-5424, Fax: (800) 263-4598
Download