A
A.3
B
B.3
3' 0"
6' 0"
5' 6"
B.6
5' 6"
5' 0"
C
5' 0"
C.5
D
5' 7 1/8"
PARAPET HEIGHT
15' 8"
8"
TOP OF STEEL HIGH
15' 0"
TOP OF STEEL LOW
14' 4"
2' 6"
15' 8"
10' 2 1/2"
11' 3 3/8"
12' 4 1/4"
13' 7 7/8"
14' 8 3/4"
9' 0"
1' 0"
19' 2"
16' 0 1/4"
5' 0"
22.62°
CEILING HEIGHT
11' 6"
FLOOR PLAN FLOOR 01
0"
3311
DOWNLIGHT
®
BeveLED2.0 Trimless
PROJECT INFORMATION
PROJECT
DATE
TYPE
1" Regress
BeveLED 2.0 Recessed Downlight - It’s a Downlight, Adjustable and Wall Wash - all in one housing - interchangeable anytime. The
BeveLED 2.0 provides maximum delivered lumens and optical performance through the optimization of thermal, optical and LED science in the
smallest possible aperture.
DELIVERED PERFORMANCE
12 Watts
BeveLED 2.0
DOWNLIGHT
Color Rendering Index
Lumens per Watt
Source Lumens
Delivered Lumens
Color Consistency
90+
80+ HIGH
CRI
CRI
83
71
1150 1000
1000 850
1" Regress
16 Watts
24 Watts
33 Watts
90+
90+
80+ HIGH
80+ HIGH
CRI
CRI
CRI
CRI
84
70
78
65
1575 1300 2175 1800
1350 1125 1875 1550
2-Step MacAdam Ellipse
1" Regress
90+
HIGH
CRI
59
2275
1950
80+
CRI
71
2725
2350
Bevel Finish
Color
Performance based on 3000K
31⁄2" x 31⁄2"
2700K
CCT MULTIPLIER
Color Rendering Index
Multiplier for
Lumen Output
80+
CRI
90+
HIGH
CRI
0.91
0.78
3000K
3500K 4000K
80+
CRI
90+
HIGH
CRI
80+
CRI
80+
CRI
1.00
.83
1.00
1.09
41⁄2" x 41⁄2"
HOW TO SPECIFY
Ordering Example: Specify trim code and housing code to order: Example : 3311W - B1 - 10 - LSLD4 - 9012 - C2 - 27KS - 30 - NC - 277V - DIML2 - CB27
TRIM ORDERING INFORMATION
TRIM
3311
3311
Square
Trimless
Downlight
1" Regress
LENS 3
BEVEL STYLE
OPTION
–
______
–
B1 1" Regress Bevel,
Die Cast
W
Wet location 1
EML Emergency 2
EMLW Emergency and
wet location 1, 2
BEVEL FINISH
–
F Frosted
3
Solite lens
is provided
standard
10
13
21
28
RAL
White
Statuary Bronze
Black
Metalized Grey
Custom Color
(specify RAL #)
1
Wet location, use with B1
trims only.
2 not for use with NCSM or
FT housing.
HOUSING ORDERING INFORMATION
HOUSING CODE
LSLD4
WATTAGE
–
ENGINE CODE
–
LSLD4
9012 12W LED,
1000 lumens
9016 16W LED,
1350 lumens
9024 24W LED,
1875 lumens
9033 33W LED,
2350 lumens
C2
C2
COLOR
–
REFLECTOR
–
27KS
30KS
35KS
40KS
27KH
30KH
HOUSING TYPE
–
–
NC New Construction
FT Flat Housing 4
New Construction
NCSM1 Narrow Width 5
1-1/4" ceiling max
NCSM2 Narrow Width 5
2-1/4" ceiling max
CP Chicago Plenum 4
IC Insulation-Contact
Rated / Airtight 4
2700K, 80+ CRI 30 30° beam
3000K, 80+ CRI 50 50° beam
3500K, 80+ CRI 80 80° beam
4000K, 80+ CRI
2700K, 90+ CRI
3000K, 90+ CRI
4
FT, IC and 33W CP not
available with EM
2 Step MacAdam ellipse
is standard for all
®
USAI
www.usailighting.com
info@usailighting.com
5 If EM option is selected with
NCSM, remote EM test switch
provided
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
OPTIONAL
DIMMING DRIVER
VOLTAGE
ACCESSORIES
–
120V
277V
–
DIML2 0-10V dim, 10%
DIML3 Lutron Hi-Lume 1%
2-wire, 120V only
DIML4 Lutron Hi-Lume 1%
3-wire/ECO
DIML6A ELDO 0-10V 0.1%,
logarithmic 6
DIML6B ELDO 0-10V 0.1%,
linear 6
DIML7 ELDO DALI 0.1% 6
DIML8 ELDO DMX 0.1% 6, 7
DIML9 TRIAC 15% 6
2-wire, 120V only
DIML10 ELV 15% 6
2-wire, 120V only
CB27 27" C-Channel Bars
CB52 52" C-Channel Bars
EML Emergency battery 8
EMLWEmergency battery,
wet location 8
MLXX Millwork adapter 9
XX=Specify Color
(10, 13, 21, 28, RAL)
Millwork not wet
listed
6
9 ML not for use with NCSM1
housings
7
Note: N/A with 33W
Note: N/A with NCSM or FT
8 Note: NCSM housings require
above ceiling access. Not
for use with IC, FT or 33W CP
housings.
© 2012. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 03/31/2015
DOWNLIGHT
®
BeveLED2.0 Trimless
3311
TRIM INFORMATION
1" Regress
EML trim (For use with
NC and CP housings)
has a hole in lens for test
switch.
EMLW trim (For use with
NC and CP housings)
does not have a hole. Test
switch is remote.
EM options with NCSM
housings do not require a
special EM trim.
31⁄2" x 31⁄2"
41⁄2" x 41⁄2"
EM options are not
available with FT, IC or
33W CP housings.
HOUSING INFORMATION
New Construction
Universal Style Housing - NC
New Construction
Flat Housing - FT
For Downlight Only
Chicago Plenum (12W, 16W & 24W) - CP
IC / Airtight (12W, 16W & 24W) - IC
73/8"
Chicago Plenum (33W) - CP
IC / Airtight (33W) - IC
73/8"
33/8”-3"
/8 -1"
81/2"
5
5
7"
/8"-1"
5
Always 4"
7"
/8"-1"
5
7"
7 /4”
1
13"
13"
81/4”
185/8" (Plan View)
16" (Plan View)
185/8" (Plan View)
22 /8" (Plan View)
19" (Plan View)
22 /8" (Plan View)
1
13"
185/8" (Plan View)
221/8" (Plan View)
1
83/8"
8 /8"
3
New Construction - Narrow Width
53/4"
43/4"
/8"-1"
Shown
with
EM option
81/4"
X"
NCSM1: 5/8" - 11/4"
NCSM2:11/4" - 21/4"
19" (Plan View)
19" (Plan View)
22(Plan View)
22(Plan View)
TRIM: 4-1/2" square aperture with a 1" regressed bevel,
retained by four mounting clips. Die cast aluminum bevel
is available in white, statuary bronze, black, and metalized
grey finishes. Custom color available (provide RAL#).
THERMAL MANAGEMENT: Proprietary high performance
aluminum die cast heatsink for maximum LED life. Ambient
temperatures at fixture location should not exceed 40°C
during normal operation.
TRIM LENS: Trim is shipped with integral solite lens
standard; frosted lens available as an option.
FIELD REPLACEABLE DRIVER: Solid state electronic
constant current driver with a high power factor provided
standard. Specify 120V or 277V. Driver complies with IEEE
C62.41 surge protection.
REFLECTOR: Interchangeable precision injection molded
specular polycarbonate reflector optimized for 30°, 50° or
80° beam distribution.
DIMMING OPTIONS: Multiple dimming drivers available.
See compatibility chart attached. Some on-time delay may
FIELD REPLACEABLE LIGHT ENGINE: Available in 4 lumen
be experienced depending on control system used. Note:
packages: 12W (1000 delivered lumens), 16W (1350 lm), 24W
DIML6A logarithmic control is intended for use with Lutron
(1875 lm) and 33W (2350 lm). Engine is field replaceable
control systems; DIML6B linear control is intended for
through the aperture without tools.
use with non-Lutron controls. DIML2 and DIML6 dimming
COLOR: BeveLED is available in 4 color temperatures (2700K, drivers source 2mA.
3000K, 3500K, 4000K). All color options are tightly binned
EMERGENCY: Emergency lighting battery pack with
for fixture-to-fixture color consistency within a 2-Step
integral test switch is serviceable through aperture for NC
MacAdam Ellipse. 80+ color rendering index provided
and CP housings. NCSM housings are provided with remote
standard. 90+ CRI available for 2700K and 3000K CCTs.
test switch and require above ceiling access for service.
Bodine BSL26C provides 200mA for 90 minutes; delivers
RATED LIFE: Based on IESNA LM80-2008 50,000 hours at
~275-300 lumens. EMLW wet location option is available
70% lumen maintenance (L70).
with B1 trim only and requires remote test switch. EM
option is not available with FT, IC or 33W CP housings.
HOUSING: All-Ways Square® (covered by US
Pat. No: US 7,832,889) housing allows alignment of
square aperture (up to 20° rotation) after housing
installation and prior to finish ceiling installation.
Fabricated of 20 ga. galvanized steel with thru wire
J-box, 4 in 4 out at min. 90°C, #12 AWG thru branch
circuit wiring.
MAXIMUM CEILING THICKNESS: As per drawings
above. Millwork option is for 2-1/2" max. thickness
wood with NCSM2 housing and for 1" max thickness
wood with all other housings. Millwork option is not
available with NCSM1 housing.
CEILING CUT OUT: Millwork: 4-13/16" x 4-13/16"
All others: 5-1/2" x 5-1/2"
LISTINGS: Dry/Damp. Wet location option available
with B1 trim only. Millwork Dry/Damp only. NRTL/
CSA-US tested to UL standards. IBEW union made.
IBEW union made.
WARRANTY: 5 years
NOTES:
• Not for use in corrosive environment.
• Use of pressure washer voids warranty.
MOUNTING: Butterfly brackets and adjustable nailer bars
with integral nails provided. Nailer bars are extendible from PHOTOMETRICS: Consult factory or website for IES
files. Tested in accordance with IESNA LM79-2008.
14" to 24" centers.
®
USAI
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2012. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 03/31/2015
ADJUSTABLE 40°
®
BeveLED2.0 Trimless
3431
PROJECT INFORMATION
PROJECT
DATE
TYPE
1" Regress
BeveLED 2.0 Recessed Adjustable - It’s a Downlight, Adjustable and Wall Wash - all in one housing - interchangeable anytime. The
BeveLED 2.0 provides maximum delivered lumens and optical performance through the optimization of thermal, optical and LED science in the
smallest possible aperture.
1" Regress
DELIVERED PERFORMANCE
12 Watts
BeveLED 2.0
ADJUSTABLE
90+
80+ HIGH
CRI
CRI
83
71
1150 1000
1000 850
1" Regress
16 Watts
80+
CRI
84
1575
1350
24 Watts
90+
HIGH
CRI
70
1300
1125
80+
CRI
78
2175
1875
33 Watts
90+
HIGH
CRI
65
1800
1550
80+
CRI
71
2725
2350
90+
HIGH
CRI
59
2275
1950
Bevel Finish
Color
(10, 13, 21, 28, RAL)
Color Rendering Index
Lumens per Watt
Source Lumens
Delivered Lumens
Center Beam
Candle Power (10°)
12675 10775 15900 13050 22475 18175 30625 26000
Color Consistency
2-Step MacAdam Ellipse
31⁄2" x 31⁄2"
41⁄2" x 41⁄2"
Performance based on 3000K
2700K
CCT MULTIPLIER
Color Rendering Index
Multiplier for
Lumen Output
80+
CRI
90+
HIGH
CRI
0.91
0.78
3000K
3500K 4000K
80+
CRI
90+
HIGH
CRI
80+
CRI
80+
CRI
1.00
.83
1.00
1.09
HOW TO SPECIFY
Ordering Example: Specify trim code and housing code to order: Example : 3431A30W - B1 - 10 - LSLA4 - 8412 - C2 - 27KS - 30 - NC - 277V - DIML2 - CB27
TRIM ORDERING INFORMATION
OPTION
TRIM
–
3431___ _____
3431A10 W
Square Trimless 10° EML
Adjustable, no lens
EMLW
3431A30
Square Trimless 30°
Adjustable, solite lens
LENS 2
BEVEL STYLE
–
B1 1" Regress Bevel,
Die Cast
Wet location 1
Emergency
Emergency and
Wet Location1
BEVEL FINISH
–
10
13
21
2 Note: Solite
28
lens provided RAL
S Solite
F Frosted
C Clear
standard for
30°, optional
for 10°.
White
Statuary Bronze
Black
Metalized Grey
Custom Color
(specify RAL #)
1 Wet location, use with B1
trims only.
HOUSING ORDERING INFORMATION
HOUSING
CODE
LSLA4 –
LSLA4
ENGINE
CODE
WATTAGE
–
8412 12W LED,
1000 lumens
8416 16W LED,
1350 lumens
8424 24W LED,
1875 lumens
8433 33W LED,
2350 lumens
C2
C2
COLOR
–
REFLECTOR*
–
27KS
30KS
35KS
40KS
27KH
30KH
USAI
–
2700K, 80+ CRI 10 10° beam NC New Construction
3000K, 80+ CRI 30 30° beam CP Chicago Plenum 3
3500K, 80+ CRI
IC InsulationContact
4000K, 80+ CRI
Rated / Airtight 3
2700K, 90+ CRI
3000K, 90+ CRI
www.usailighting.com
info@usailighting.com
3
Not available with EM
1126 River Road
New Windsor, NY 12553
OPTIONAL
DIMMING DRIVER
VOLTAGE
–
* Note: For
other beam
2 Step MacAdam ellipse
options, see
is standard for all
"Accessories"
®
HOUSING TYPE
–
120V
277V
ACCESSORIES
–
CB27 27" C-Channel Bars
DIML2 0-10V dim, 10%
CB52 52" C-Channel Bars
DIML3 Lutron Hi-Lume 1%
2-wire, 120V only
EML Emergency battery 5
DIML4 Lutron Hi-Lume 1%
EMLW Emergency battery,
3-wire/ECO
wet location 5
DIML6A ELDO 0-10V 0.1%, MLXX Millwork adapter
logarithmic 4
XX=Specify Color
DIML6B ELDO 0-10V 0.1%,
(10, 13, 21, 28, RAL)
linear 4
Millwork not wet listed
DIML7 ELDO DALI 0.1% 4
DIML8 ELDO DMX 0.1% 4
DIML9 TRIAC 15% 4
2-wire, 120V only
DIML10 ELV 15% 4
2-wire, 120V only
4
Note: N/A with 33W
T 845–565–8500
F 845–561–1130
5
OPTICAL
ACCESSORIES
(Order
separately)
AL10E
AL15E
AL30E
AS61E
AL20F
AL30F
AL40F
AL55F
AL80F
AS61F
Refer to optical
accessories
matrix on next
page for
resulting
beamspreads
when
accessory
lens is
combined
with 10° and
30° optics
Clearly specify quantity
in your order
For use with NC housings only.
© 2012. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 03/31/2015
ADJUSTABLE 40°
®
BeveLED2.0 Trimless
3431
TRIM INFORMATION
BeveLED 2.0 Optical Accessories Matrix
if you want…
and you have….
10°
30°
15° beam
AL10E N/A
20° beam
AL15E N/A
25° beam
AL30E N/A
35° beam
N/A
AL20F
40° beam
N/A
AL30F
45° beam
N/A
AL40F
55° beam
N/A
AL55F
60° beam
N/A
AL80F
20x60° beam
AS61E N/A
40x60° beam
N/A
AS61F
1" Regress
1" Regress
Bevel Finish
Color
(10, 13, 21, 28, RAL)
31⁄2" x 31⁄2"
41⁄2" x 41⁄2"
HOUSING INFORMATION
New Construction
Universal Style Housing - NC
Chicago Plenum (12W, 16W & 24W) - CP
IC / Airtight (12W, 16W & 24W) - IC
73/8"
Chicago Plenum (33W) - CP
IC / Airtight (33W) - IC
73/8"
81/2"
5
/8"-1"
7"
5
/8"-1"
7"
5
7"
13"
13"
13"
185/8" (Plan View)
185/8" (Plan View)
185/8" (Plan View)
22 /8" (Plan View)
22 /8" (Plan View)
221/8" (Plan View)
1
1
/8"-1"
SPECIFICATIONS
TRIM: 4-1/2" square aperture with a 1" regressed bevel,
retained by four mounting clips. Die cast aluminum bevel
is available in white, statuary bronze, black, and metalized
grey finishes. Custom color available (provide RAL#).
THERMAL MANAGEMENT: Proprietary high performance
aluminum die cast heatsink for maximum LED life. Ambient
temperatures at fixture location should not exceed 40°C
during normal operation.
TRIM LENS: 30° trim is shipped with integral solite lens.
10° does not come with a solite lens unless selected as
an option. Frosted lens option available for both. 10° wet
location is provided with a clear lens.
FIELD REPLACEABLE DRIVER: Solid state electronic
constant current driver with a high power factor provided
standard. Specify 120V or 277V. Driver complies with IEEE
C62.41 surge protection.
REFLECTOR: Interchangeable precision injection molded
specular polycarbonate reflector optimized for 10° or 30°
beam distribution. Note: 10° optic requires dedicated 10°
light engine.
DIMMING OPTIONS: Multiple dimming drivers available.
See compatibility chart attached. Some on-time delay may
be experienced depending on control system used. Note:
DIML6A logarithmic control is intended for use with Lutron
control systems; DIML6B linear control is intended for
use with non-Lutron controls. DIML2 and DIML6 dimming
drivers source 2mA.
ADJUSTMENT: True hot aiming with center beam optics is
adjustable, with a completely tool-less mechanism. 0°-40°
lockable vertical tilt with 362° lockable rotation.
EMERGENCY: Emergency lighting battery pack with
remote test switch is serviceable through aperture for NC
housings. Bodine BSL26C provides 200mA for 90 minutes;
delivers ~275-300 lumens. EMLW wet location option is
available with B1 trim only and requires remote test switch.
COLOR: BeveLED is available in 4 color temperatures (2700K, EM option is available for NC housings only. DIML2 and
DIML6 dimming drivers source 2mA.
3000K, 3500K, 4000K). All color options are tightly binned
for fixture-to-fixture color consistency within a 2-Step
MOUNTING: Butterfly brackets and adjustable nailer bars
MacAdam Ellipse. 80+ color rendering index provided
with integral nails provided. Nailer bars are extendible from
standard. 90+ CRI available for 2700K and 3000K CCTs.
14" to 24" centers.
RATED LIFE: Based on IESNA LM80-2008 50,000 hours at
70% lumen maintenance (L70).
FIELD REPLACEABLE LIGHT ENGINE: Available in 4 lumen
packages: 12W (1000 delivered lumens), 16W (1350 lm),
24W (1875 lm) or 33W (2350 lm). Engine is field replaceable
through the aperture without tools.
®
USAI
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
HOUSING: All-Ways Square® (covered by US
Pat. No: US 7,832,889) housing allows alignment of
square aperture (up to 20° rotation) after housing
installation and prior to finish ceiling installation.
Fabricated of 20 ga. galvanized steel with thru wire
J-box, 4 in 4 out at min. 90°C, #12 AWG thru branch
circuit wiring.
MAXIMUM CEILING THICKNESS: As per drawings
above. Millwork for 1" maximum wood.
ACCESSORY HOLDER: Snap in accessory holder
shipped with fixture.
10° accepts "E" size lens, maximum 2.
30° accepts "F" size lens, maximum 2.
CEILING CUT OUT: Millwork: 4-13/16" x 4-13/16"
All others: 5-1/2" x 5-1/2"
LISTINGS: Dry/Damp/Wet. Millwork Dry/Damp
only. Wet location option available with B1 trim
only. NRTL/CSA-US tested to UL standards. IBEW
union made.
WARRANTY: 5 years
NOTES:
• Not for use in corrosive environment.
• Use of pressure washer voids warranty.
• For interior use only.
PHOTOMETRICS: Consult factory or website for
IES files. Tested in accordance with IESNA LM792008.
© 2012. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 03/31/2015
WALL WASH
®
BeveLED2.0 Trimless
3451
PROJECT INFORMATION
PROJECT
DATE
TYPE
1" Regress
BeveLED 2.0 Recessed Wall Wash - It’s a Downlight, Adjustable and Wall Wash - all in one housing - interchangeable anytime. The
BeveLED 2.0 provides maximum delivered lumens and optical performance through the optimization of thermal, optical and LED science in the
smallest possible aperture.
1" Regress
DELIVERED PERFORMANCE
12 Watts
BeveLED 2.0
WALL WASH
Color Rendering Index
Lumens per Watt
Source Lumens
Delivered Lumens
Color Consistency
90+
80+ HIGH
CRI
CRI
50
44
1150 1000
600
525
16 Watts
24 Watts
1" Regress
33 Watts
90+
90+
80+ HIGH
80+ HIGH
CRI
CRI
CRI
CRI
52
44
48
40
1575 1300 2175 1800
825
700
1150 950
2-Step MacAdam Ellipse
80+
CRI
44
2725
1450
90+
HIGH
CRI
36
2275
1200
Bevel Finish
Color
(10, 13, 21, 28, RAL)
Performance based on 3000K
2700K
CCT MULTIPLIER
Color Rendering Index
Multiplier for
Lumen Output
3000K
31⁄2" x 31⁄2"
3500K 4000K
41⁄2" x 41⁄2"
80+
CRI
90+
HIGH
CRI
80+
CRI
90+
HIGH
CRI
80+
CRI
80+
CRI
0.91
0.78
1.00
.83
1.00
1.09
HOW TO SPECIFY
Ordering Example: Specify trim code and housing code to order: Example : 3451W - B1- 10 - LSLW4 - 6012 - C2 - 27KS - NC - 277V - DIML2 - CB27
TRIM ORDERING INFORMATION
TRIM
3451
3451
Square
Trimless
Wall Wash
1" Regress
OPTION
BEVEL STYLE
BEVEL FINISH
–
______
–
W
Wet location 1
EML Emergency
EMLW Emergency and
wet location 1
10
13
21
28
RAL
B1 1" Regress Bevel,
Die Cast
White
Statuary Bronze
Black
Metalized Grey
Custom Color
(specify RAL #)
1
Wet location, use with B1
trims only.
HOUSING ORDERING INFORMATION
HOUSING CODE
LSLW4
WATTAGE
–
ENGINE CODE
–
LSLW4
6012 12W LED,
600 lumens
6016 16W LED,
825 lumens
6024 24W LED,
1150 lumens
6033 33W LED,
1450 lumens
C2
C2
COLOR
–
27KS
30KS
35KS
40KS
27KH
30KH
USAI
www.usailighting.com
info@usailighting.com
–
2700K, 80+ CRI NC New Construction
3000K, 80+ CRI CP Chicago Plenum 2
3500K, 80+ CRI IC InsulationContact
4000K, 80+ CRI
Rated / Airtight 2
2700K, 90+ CRI
3000K, 90+ CRI
2
OPTIONAL
DIMMING DRIVER
VOLTAGE
–
2 Step MacAdam ellipse
is standard
®
HOUSING TYPE
–
120V
277V
Not available with EM
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
ACCESSORIES
–
DIML2 0-10V dim, 10%
DIML3 Lutron Hi-Lume 1%
2-wire, 120V only
DIML4 Lutron Hi-Lume 1%
3-wire/ECO
DIML6A ELDO 0-10V 0.1%,
logarithmic 3
DIML6B ELDO 0-10V 0.1%,
linear 3
DIML7 ELDO DALI 0.1% 3
DIML8 ELDO DMX 0.1% 3
DIML9 TRIAC 15% 3
2-wire, 120V only
DIML10 ELV 15% 3
2-wire, 120V only
CB27
CB52
EML
EMLW
3
4
Note: N/A with 33W
27" C-Channel Bars
52" C-Channel Bars
Emergency battery 4
Emergency battery,
wet location 4
MLXX Millwork adapter
XX=Specify Color
(10, 13, 21, 28, RAL)
Millwork not wet
listed
For use with NC housings only.
© 2012. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 03/31/2015
WALL WASH
®
BeveLED2.0 Trimless
3451
TRIM INFORMATION
1" Regress
1" Regress
Bevel Finish
Color
(10, 13, 21, 28, RAL)
31⁄2" x 31⁄2"
41⁄2" x 41⁄2"
HOUSING INFORMATION
New Construction
Universal Style Housing - NC
Chicago Plenum (12W, 16W & 24W) - CP
IC / Airtight (12W, 16W & 24W) - IC
73/8"
5
81/2"
73/8"
/8"-1"
7"
Chicago Plenum (33W) - CP
IC / Airtight (33W) - IC
5
7"
/8"-1"
/8"-1"
5
7"
13"
13"
13"
185/8" (Plan View)
185/8" (Plan View)
185/8" (Plan View)
22 /8" (Plan View)
22 /8" (Plan View)
221/8" (Plan View)
1
1
SPECIFICATIONS
TRIM: 4-1/2" square aperture with a 1" regressed bevel,
retained by four mounting clips. Die cast aluminum bevel
is available in white, statuary bronze, black, and metalized
grey finishes. Custom colors available (provide RAL#).
THERMAL MANAGEMENT: Proprietary high performance
aluminum die cast heatsink for maximum LED life. Ambient
temperatures at fixture location should not exceed 40°C
during normal operation.
TRIM LENS: Trim is shipped with micro diffusion wall wash
lens.
FIELD REPLACEABLE DRIVER: Solid state electronic
constant current driver with a high power factor provided
standard. Specify 120V or 277V. Driver complies with IEEE
C62.41 surge protection.
REFLECTOR: Proprietary precision injection molded wall
wash reflector.
DIMMING OPTIONS: Multiple dimming drivers available.
ADJUSTMENT: 362° horizontal locking in 90° increments.
See compatibility chart attached. Some on-time delay may
be experienced depending on control system used. Note:
FIELD REPLACEABLE LIGHT ENGINE: Available in 4 lumen
DIML6A logarithmic control is intended for use with Lutron
packages: 12W (600 delivered lumens), 16W (825 lm), 24W
control systems; DIML6B linear control is intended for
(1150 lm) and 33W (1450 lm). Engine is field replaceable
use with non-Lutron controls. DIML2 and DIML6 dimming
through the aperture without tools.
drivers source 2mA.
COLOR: BeveLED is available in 4 color temperatures (2700K,
EMERGENCY:
Emergency lighting battery pack with
3000K, 3500K, 4000K). All color options are tightly binned
remote test switch is serviceable through aperture for NC
for fixture-to-fixture color consistency within a 2-Step
housings. Bodine BSL26C provides 200mA for 90 minutes;
MacAdam Ellipse. 80+ color rendering index provided
delivers ~275-300 lumens. EMLW wet location option is
standard. 90+ CRI available for 2700K and 3000K CCTs.
available with B1 trim only and requires remote test switch.
RATED LIFE: Based on IESNA LM80-2008 50,000 hours at
EM option is available with NC housings only.
70% lumen maintenance (L70).
MOUNTING: Butterfly brackets and adjustable nailer bars
with integral nails provided. Nailer bars are extendible from
14" to 24" centers.
®
USAI
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
HOUSING: All-Ways Square® (covered by US
Pat. No: US 7,832,889) housing allows alignment of
square aperture (up to 20° rotation) after housing
installation and prior to finish ceiling installation.
Fabricated of 20 ga. galvanized steel with thru wire
J-box, 4 in 4 out at min. 90°C, #12 AWG thru branch
circuit wiring.
MAXIMUM CEILING THICKNESS: As per drawings
above. Millwork for 1" maximum wood.
CEILING CUT OUT: Millwork: 4-13/16" x 4-13/16"
All others: 5-1/2" x 5-1/2"
LISTINGS: Dry/Damp. Wet location option available
with B1 trim only. Millwork Dry/Damp only. NRTL/
CSA-US tested to UL standards. IBEW union made.
WARRANTY: 5 years
NOTES:
• Not for use in corrosive environment.
• Use of pressure washer voids warranty.
• For interior use only.
PHOTOMETRICS: Consult factory or website for IES
files. Tested in accordance with IESNA LM79-2008.
© 2012. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 03/31/2015