WALL WASH
®
BeveLED BASIC Trimless
1351
PROJECT INFORMATION
PROJECT
DATE
TYPE
1" REGRESS
BeveLED Basic Recessed Wall Wash- Our narrow footprint housing provides an economical architectural solution while delivering high
performance with LEDs.
DELIVERED PERFORMANCE
1" Regress
14 Watts
BeveLED Basic
WALL WASH
20 Watts
1" Regress
80+
80+
CRI
CRI
52
46
1100
1500
725
950
2-Step MacAdam Ellipse
Color Rendering Index
Lumens per Watt
Source Lumens
Delivered Lumens
Color Consistency
Bevel Finish
Color area
Performance based on 3000K
CCT MULTIPLIER
2700K
3000K
3500K
80+
CRI
80+
CRI
80+
CRI
1.00
1.00
1.08
Color Rendering Index
Multiplier for
Lumen Output
41⁄2" Ø
HOW TO SPECIFY
Ordering Example: Specify trim code and housing code to order: Example : 1351W - B1 - 10 - LSTW4 - 6014 - M2 - 27KS - NCSM - 277V - DIML2 - CB27
TRIM ORDERING INFORMATION
TRIM
1351
1351
Round
Trimless
Wall Wash
1"
Regress
BEVEL STYLE
OPTION
–
Wet location 1
W
B1 BEVEL FINISH
–
______
10
13
21
28
RAL
B1 1” Regress Bevel,
Die Cast
1 Wet location, use with B1
trims only.
White
Statuary Bronze
Black
Metalized Grey
Custom Color
(specify RAL #)
AB1 1” Regress Bevel,
Black Anodized Finish
AC1 1” Regress Bevel,
(Leave blank for AB1 and AC1 Bevel
Styles)
Clear Matte Anodized Finish
HOUSING ORDERING INFORMATION
HOUSING CODE
WATTAGE
–
LRLW4
LRLW4
ENGINE CODE
–
6014 14W LED,
725 lumens
6020 20W LED,
950 lumens
M2
M2
COLOR
–
HOUSING TYPE
–
27KS 2700K, 80+ CRI
30KS 3000K, 80+ CRI
35KS 3500K, 80+ CRI
–
NCSM1 New Construction
5/8”- 1-1/4”
Ceiling Thickness
NCSM2 New Construction
1-1/4”- 2-1/4”
Ceiling Thickness
IC Insulation-Contact
Rated / Airtight
–
120V
277V
2 Step MacAdam ellipse
is standard for all
USAI
Lighting
®
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
OPTIONAL
DIMMING DRIVER
VOLTAGE
ACCESSORIES
–
DIML2 0-10V dim, 10%
DIML3 Lutron Hi-Lume 1%
2-wire, 120V only
DIML4 Lutron Hi-Lume 1%
3-wire/ECO
DIML6A ELDO 0-10V 0.1%,
logarithmic
DIML6B ELDO 0-10V 0.1%,
linear
DIML7 ELDO DALI 0.1%
DIML9 TRIAC 15%
2-wire, 120V only
DIML10 ELV 15%
2-wire, 120V only
CB27
CB52
EML
EMLW
MLXX - Millwork Adapter 3
XX=Specify Color
(10, 13, 21, 28, RAL)
Millwork not wet
listed
2 NCSM housings require above
ceiling access. Not for use with
IC housing.
3
T 845–565–8500
F 845–561–1130
27" C-Channel Bars
52" C-Channel Bars
Emergency battery 2
Emergency battery,
wet location 2
N/A with NCSM1 housing
© 2014. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 10/14/2015
WALL WASH
®
BeveLED BASIC Trimless
1351
TRIM INFORMATION
1" Regress
1" Regress
Finish
Color
41⁄2" Ø
HOUSING INFORMATION
New Construction - NCSM
IC / Airtight - IC
43/4"
73/8"
X"
5
NCSM1: 5/8" - 11/4"
NCSM2:11/4" - 21/4"
/8"-1"
7"
83/8"
83/8"
53/4"
Shown
with
EM option
13"
81/4"
19" (Plan View)
19" (Plan View)
185/8" (Plan View)
22(Plan View)
22(Plan View)
221/8" (Plan View)
SPECIFICATIONS
TRIM: 4-1/2” round aperture with a 1” regressed bevel,
retained by three ball plungers. Die cast aluminum bevel
is available in white, statuary bronze, black, and metalized
grey finishes. Also available in black anodized or clear matte
anodized bevel. Custom color available (provide RAL#).
TRIM LENS: Micro diffusion lens.
REFLECTOR: Precision injection molded specular
polycarbonate reflector maximized for wall wash
distribution.
THERMAL MANAGEMENT: Proprietary high performance
aluminum die cast heatsink for maximum LED life. Ambient
temperatures at fixture location should not exceed 40°C
during normal operation.
HOUSING: Fabricated of 20 ga. galvanized steel
with thru wire J-box, 4 in 4 out at min. 90°C, #12
AWG thru branch circuit wiring. IC rated housing
rated for direct contact with insulation.
FIELD REPLACEABLE DRIVER: Solid state electronic
constant current driver with a high power factor provided
standard. Specify 120V or 277V. Driver complies with IEEE
C62.41 surge protection.
MAXIMUM CEILING THICKNESS: As per drawings
above. ML option is for 1” max thickness wood with
IC housing and for 2-1/4” max thickness wood with
NCSM2 housing. Millwork option is not available
with NCSM1 housing.
DIMMING OPTIONS: Multiple dimming drivers available.
See compatibility chart attached. Some on-time delay may
be experienced depending on control system used. Note:
DIML6A logarithmic control is intended for use with Lutron
control systems; DIML6B linear control is intended for use
with non-Lutron controls. DIML2 and DIML6 drivers source
COLOR: BeveLED is available in 3 color temperatures (2700K, 2mA.
3000K, 3500K). All color options are tightly binned for fixture- EMERGENCY: Emergency lighting battery pack is provided
to-fixture color consistency within a 2-Step MacAdam
with remote test switch and require above ceiling access
Ellipse. 80+ color rendering index provided standard.
for service. EM option is not available with IC housings.
RATED LIFE: Based on IESNA LM80-2008 50,000 hours at
MOUNTING: Butterfly brackets and adjustable nailer bars
70% lumen maintenance (L70).
with integral nails provided. Nailer bars are extendible from
14" to 24" centers.
FIELD REPLACEABLE LIGHT ENGINE: Available in 2 lumen
packages: 14W (725 delivered lumens) and 20W (950
delivered lumens). Engine is field replaceable through the
aperture without tools.
USAI
Lighting
®
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
CEILING CUT OUT: Millwork: 4-13/16” Ø
All others: 5-1/2” Ø
LISTINGS: Dry/Damp. Wet location option available
with B1 trim only. NRTL/CSA-US tested to UL
standards. IBEW union made.
WARRANTY: 5 years
NOTES:
• Not for use in corrosive environment.
• Use of pressure washer voids warranty.
• Trimless for drywall installation only.
PHOTOMETRICS: Consult factory or website for IES
files. Tested in accordance with IESNA LM79-2008.
© 2014. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 10/14/2015