NHRPIC-4 Series
4" Vertical Remodel IC Housing
with Wall Wash Trim
Type
Project
Lamp: 13-26W Electronic 4-Pin Quad
NHRPIC-418
13-26W Electronic 4-Pin Triple
Biax
NHRPIC-418
Catalog No.
PRODUCT DESCRIPTION
Small aperture remodel housing for use in insulated ceilings, where fixture is in direct contact
with thermal insulation and meets air-tight (AT) standards. Thermally protected, specification
grade recessed housing. Electronic compact fluorescent ballast meets stringent energy
requirements. Adheres to the minimum lumens to watts ratio that qualifies to Energy Star.
DIMENSIONS
Lamp/Wattage
CONSTRUCTION
Mounting Frame
One piece 0.040 galvanized steel die cut frame.
6-3/8"
4-3/4"
6-3/8"
Housing
0.040 steel housing adjusts from 5/8" (Min) to a maximum ceiling thickness of 1-5/8".
Integral spring brackets remain flush with housing.
4-3/4"
4-1/4"
Ceiling Cut4-1/4"
Out: 4-1/4"
Mounting
Four high tension temepered steel springs secure remodel housing evenly to 5/8" max.
thickness of ceiling (Cutout template provided for convenience).
13-1/8"
13-1/8"
Ceiling Cut Out: 4-1/4"
Cut out: 4-1/4"
Height: 6-3/8"
Socket
One vertically mounted 4-pin CF socket, type G24q-3.
Junction Box
Prewired 25 cubic inch .064" thick galvanized steel, with seven 7/8" knockout, four Romex®
pryouts, and snap on covers. All leads are #18AWG wire, the ground wire is connected to the
bottom, and quick connectors are supplied on all leads. Through branch circuit wiring, (4-in,
4-out).
Housing Length: 13-1/8"
Housing Width: 4-3/4"
Optional Dimming
A variety of dimming ballast option are available in 13-26W. Each option
requires a controller that is compatible. Specify suffix.
DAS Advance Mark X, AMBI Star 120V (2Wire), Residential
D10 Universal Technologies 0-10V (4Wire), Universal
MX1 Advance Mark X 120V (2Wire), (Specify Wattage)
MX2 Advance Mark X 277V (2Wire), (Specify Wattage)
M7 Advance Mark 7 (4Wire), Universal
L51 Lutron SE 5% 120V (3Wire), (Specify Wattage & Voltage)
L52 Lutron SE 5% 277V (3Wire). (Specify Wattage & Voltage)
Lamp
- 13-26W Electronic 4-Pin Quad lamp ordered separately.
- 13-26W Electronic 4-Pin Triple Biax lamp ordered separately.
BALLAST
Electronic; Air-Tight (ELAT) - Residential
Thermally protected, electronic high power factor, single tap input voltage 120V, 0.225 Ampere
- 0.974 Ampere, 50/60Hz with end of life protection. Class P, 26 Watts maximum.
Starting Temperature
0˚ F – 18˚C
Operating Ambient Temperature
75˚C (Max)
Start Rating
>50,000
Power Factor
HPF
Flicker
<3%
THD
<10%
Optional Emergency
90 minutes, 650 lumen battery backup must be ordered separately and
installed apart from the housing in an accessibe location.
Optional Accessories
ATE2
120/277V Electronic Ballast (Air Tight)
FS
Fuse 2A
Trim
Half moon wall wash for wall inllumination.
Labels and Listings
UL Listed for Damp Location w/ Feed Through
Energy Star Rated (Electronic ballast only)
State of California Title 24 (Electronic ballast & Air-Tight only)
Washington State ASATME-283 for Air-Tight
AIR
TIGHT
Create a complete fixture/trim catalog number:
Housing - select one box from each column
Catalog No.
NHRPIC-4
Lamps
1
Wattage
13
Ballast
ELAT
Example: N H R P I C - 4 2 6 E L AT
Options
/
NTS-4255CW
Baffle Trims
Dimming
Emergency
DAS
M7
EM
D10
L51
EM2
MX1
L52
Fuse
Catalog No.
FS
NTS-4255
Reflector
C
Ring
W
(120V)
18
ATE2
(120/277V)
26
Finishes: C = Chrome, W= White
MX2
6505 Gayhart St., Commerce, CA 90040
Phone: 800.686.6672 • FAX 800.500.9955
www.noralighting.com • e-mail: nora@noralighting.com
Specifications subject to change without notice. © 2008
18
NHRPIC-4 WALL WASH TRIM
NTS-4255 Chrome Cone Reflector, Wall Wash,
White Ring
6-3/8"
4-3/4"
4-1/4"
Ceiling Cut Out: 4-1/4"
13-1/8"
Trim OD:
5"
Phone: 800.686.6672 • FAX 800.500.9955
6505 Gayhart St., Commerce, CA 90040
Specifications subject to change without notice. © 2008
www.noralighting.com • e-mail: nora@noralighting.com
NHRPIC-4 Series
4" Vertical Remodel IC Housing
with Baffle Trim
Type
Project
Lamp: 13-26W Electronic 4-Pin Quad
NHRPIC-418
13-26W Electronic 4-Pin Triple
Biax
NHRPIC-418
Catalog No.
PRODUCT DESCRIPTION
Small aperture remodel housing for use in insulated ceilings, where fixture is in direct contact
with thermal insulation and meets air-tight (AT) standards. Thermally protected, specification
grade recessed housing. Electronic compact fluorescent ballast meets stringent energy
requirements. Adheres to the minimum lumens to watts ratio that qualifies to Energy Star.
DIMENSIONS
Lamp/Wattage
CONSTRUCTION
Mounting Frame
One piece 0.040 galvanized steel die cut frame.
6-3/8"
6-3/8"
4-3/4"
4-3/4"
Housing
0.040 steel housing adjusts from 5/8" (Min) to a maximum ceiling thickness of 1-5/8".
Integral spring brackets remain flush with housing.
4-1/4"
4-1/4"
Out: 4-1/4"
Ceiling Cut
Ceiling Cut Out: 4-1/4"
Mounting
Four high tension temepered steel springs secure remodel housing evenly to 5/8" max.
thickness of ceiling (Cutout template provided for convenience).
13-1/8"
13-1/8"
Cut out: 4-1/4"
Height: 6-3/8"
Socket
One vertically mounted 4-pin CF socket, type G24q-3.
Junction Box
Prewired 25 cubic inch .064" thick galvanized steel, with seven 7/8" knockout, four Romex®
pryouts, and snap on covers. All leads are #18AWG wire, the ground wire is connected to the
bottom, and quick connectors are supplied on all leads. Through branch circuit wiring, (4-in,
4-out).
Housing Length: 13-1/8"
Housing Width: 4-3/4"
Optional Dimming
A variety of dimming ballast option are available in 13-26W. Each option
requires a controller that is compatible. Specify suffix.
DAS Advance Mark X, AMBI Star 120V (2Wire), Residential
D10 Universal Technologies 0-10V (4Wire), Universal
MX1 Advance Mark X 120V (2Wire), (Specify Wattage)
MX2 Advance Mark X 277V (2Wire), (Specify Wattage)
M7 Advance Mark 7 (4Wire), Universal
L51 Lutron SE 5% 120V (3Wire), (Specify Wattage & Voltage)
L52 Lutron SE 5% 277V (3Wire). (Specify Wattage & Voltage)
Lamp
- 13-26W Electronic 4-Pin Quad lamp ordered separately.
- 13-26W Electronic 4-Pin Triple Biax lamp ordered separately.
BALLAST
Electronic; Air-Tight (ELAT) - Residential
Thermally protected, electronic high power factor, single tap input voltage 120V, 0.225 Ampere
- 0.974 Ampere, 50/60Hz with end of life protection. Class P, 26 Watts maximum.
Starting Temperature
0˚ F – 18˚C
Operating Ambient Temperature
75˚C (Max)
Start Rating
>50,000
Power Factor
HPF
Flicker
<3%
THD
<10%
Optional Emergency
90 minutes, 650 lumen battery backup must be ordered separately and
installed apart from the housing in an accessibe location.
Optional Accessories
ATE2
120/277V Electronic Ballast (Air Tight)
FS
Fuse 2A
Trim
Precision spun .050 alum high grad specular finish. Separate, white ring is standard.
Labels and Listings
UL Listed for Damp Location w/ Feed Through
Energy Star Rated (Electronic ballast only)
State of California Title 24 (Electronic ballast & Air-Tight only)
Washington State ASATME-283 for Air-Tight
AIR
TIGHT
Create a complete fixture/trim catalog number:
Housing - select one box from each column
Catalog No.
NHRPIC-4
Lamps
1
Wattage
13
Ballast
ELAT
Example: N H R P I C - 4 2 6 E L AT
Options
ATE2
NTS-4230BB
Baffle Trim
Dimming
Emergency
DAS
M7
EM
D10
L51
EM2
MX1
L52
(120V)
18
/
Fuse
Catalog No.
FS
NTS-4230
Reflector
Baffle
B
W
C
Ring
B
W
(120/277V)
26
Finishes: B = Black, C =Chrome, W = White
MX2
6505 Gayhart St., Commerce, CA 90040
Phone: 800.686.6672 • FAX 800.500.9955
www.noralighting.com • e-mail: nora@noralighting.com
Specifications subject to change without notice. © 2008
18
BAFFLE TRIM
NTS-4230 Cone Reflector w/ Baffle
6-3/8"
4-3/4"
4-1/4"
Ceiling Cut Out: 4-1/4"
13-1/8"
Baffle:
Ring:
Trim ID:
Trim OD:
Baffle Depth:
4-3/4"
Black (B), White (W)
Black (B), White (W)
3-5/8"
5"
2"
5"
Phone: 800.686.6672 • FAX 800.500.9955
6505 Gayhart St., Commerce, CA 90040
Specifications subject to change without notice. © 2008
www.noralighting.com • e-mail: nora@noralighting.com