Equipment and Specification Required for Smart Class
A. List of equipment
S. No.
Item Description
Quantity
1
Integrated Digital Podium
1
2
Ultra Short Throw LCD Projector
1
3
120” Motorized Screen with remote control
1
4
Full HD 55” LED TV
2
5
5KVA Online UPS with 60 minutes battery backup
1
6
Digital interfacing and all digital cable connectivity
1 Lot
to integrate all the equipment
B. WI-FI LAN Work along with equipment
1.
Supply, laying, termination and testing of UTP CAT 6 Cable 1box (305 Mtr)
with casing and capping for Networking of AP complete with
necessary ferrule numbering at both the ends of each piece of
cable complete.
2.
Supply, installation, testing and commissioning of CAT - 6 5
Information outlets (I/O) with face plate and flush PVC box
complete to be installed concealed in wall.
3.
Supply, installation and fixing of 24 port Gigabit Fast 1
Ethernet Web Managed L2 PoE Switch
4.
Supply, installation and fixing of 300 Mbps Wireless Access 3
Point with PoE Support
5.
Patch Cord Cat 6 UTP Blue 1m - Moulded
6
6.
Patch Cord Cat 6 UTP Blue 2m - Moulded
6
7.
Supply, installation and fixing of Patch Panel Cat 6 UTP 1
Modular -24 Port- Loaded 0.5U Height
8.
Supply, installation and fixing of 9 U Wall Mount Rack with 1
Accessories
A. Equipment Specifications:
1. Integrated Digital Podium
I.
II.
Stand Type, Solid Built housing with steel / Fiberglass / rubber wood.
Provided with locking system to prevent theft Soft wheels for convenient
transport.
III.
Sliding Door with Wooden material to protect Tablet Monitor and as Laptop
Stand.
IV.
Equipped with LCD Tablet Monitor with 19 inches or wider tablet monitor with
1920X1080 resolution or more and must have following features
Aspect Ratio
Active Area
Brightness
Contrast Ratio
Viewing Angle
Hight Adjustment
16:10
477(H)×268(V)
350 cd/m2
1000:1
160°(H/V)
Motorised Control of height through button
writing, annotation, erasing, recording of session with video,
cut & paste of annotated images, multi-flag pages available for
Software Functions short notes, facility of making e-book, dual page option, fit to
curve, multi color page insert , insertion of video MS office file
etc for annotation.
V.
VI.
VII.
Standard Electronic Pen for writing on Tablet Monitor.
Trainer Laptop interface terminals and slots to use a laptop.
Gooseneck adjustable Mic to fit user’s height with good acoustics to attain good
Quality Audio
VIII.
IX.
X.
Standard mouse for navigation during training.
Drawer for keeping material required for trainer.
6” or Higher LCD Control Panel for Multi controller which utilizes and control all
the devices in the lecture room such as interactive whiteboard, TV, DVD, air
conditioner, PC, projector, large-sized screen etc.
XI.
Podium must be equipped with automatic mixer, Power Amplifier etc. which can
support up to 6 column line array speaker, 4 wireless Microphone and 2 lapel
Microphone.
XII.
6 Speakers set having output 120W @ 4 ohm or more, Frequency range 52.9 ~
12,000Hz, Sound Pressure Level 96dB, Total harmonic distortion 0.1% (1kHz) or
better
XIII.
Podium is to be supplied with 3 Wireless Hand held Microphone system and two
lapel microphone system.
XIV.
Podium must be equipped with presentation switcher that accepts and scales a
wide range of video signals to a common, high resolution output rate. It can
accommodate two composite video, two S-video, one standard or high definition
component video, one DVI-D, and two RGB computer-video sources.
XV.
Podium must be equipped with One-Gang WPB Wallplate for HDMI, VGA, and
Stereo Audio
XVI.
Digital Podium should have sufficient space for installing a PC, Visualiser,
Amplifier, Controller, Wireless Receiver.
XVII.
Equipped with Document Visualizer with following specification:
i. SXGA (1280 × 1024) High Quality Resolution, up to 20 frame rate per
second or Better
ii. Image Sensor 1/2” 1.3M Pixels CMOS or Better
iii. Manual Focus Function
iv. Digital 7X Zoom or more
v. USB Cable PC Interface
XVIII.
Equipped with PC of internationally known brand like HP, IBM, Dell etc
i. Processor: Intel Core i7-2600, 3.4 GHz, 8MB cache or better
ii. Chipset: Intel Q67 or higher on OEM motherboard
iii. Memory: 3GB DDR3 RAM
iv. HDD: 320 GB @7200 RPM SATA or higher
v. DVD ROM Drive: 8X or better
vi. OS: Preloaded Windows 8
vii. NIC: 10/100/1000 on board integrated network port and GiGa bit Wi-Fi
Card
viii. Preinstalled MS Office 2012 Professional (Academic Version) or higher
ix. Preloaded Antivirus with one year subscription
XIX.
One year onsite comprehensive warrantee
2. Ultra Short Throw LCD Projector
Description
Minimum Should be
1
Resolution
1024x768 or better
2
Contrast Ratio
8000:1 or more
3
Brightness
3100 ANSI lumens or more
4
Short Throw Distance
2 feet to 3 feet or better
5
Image Size / Projection
70 inches to 100 inches or better
S.
No
Area
6
Compatibility
HDTV Formats (720p, 1080i, 1080p, 575i, 575p), Digital
Input (HDMI), Personal Computers, Standard Video,
Component Video
7
Aspect Ration
16:10 (WXGA) or better
8
Interfaces
9
Keystone correction
10
Other Features
Mini USB, HDMI Inx1, MONITOR OUTx1, COMPUTER IN X2
Nos., LAN inputx1, Computer Audio- 1Nos., S Video Input
With audiox1, Video Input with Audio x1
-+/- 15%

 projection system must be capable of project 90”
Image from distance of 25” or in same ratio
3. 120” Motorized Screen with remote control
1
2
3
4
Size
Aspect Ration
Vie Angle
Other Features
120” (Diagonal)
4:3
160 degree
 Free to stop any location
 Super high grain
 Matt white fabric
 Screen should be retractable gpe and can be
operated (pull down and wound back) via
motoi'and preferably wireless remote
 control.
4. Full HD 55” LED TV
1.
Size
55" Diagonal Size
2.
3.
4.
5.
6.
7.
8.
1,920 x 1,080, (16.7 Million Display Color)
16:9
0.21(H) x 0.63(V)mm
1209.6 (H) x 680.4 (V) mm
350 cd/㎡
100,000:1
178 / 178 °
9.
10.
Resolution
Aspect Ratio
Pixel Pitch
Active Display Area
Brightness
Dynamic Contrast Ratio
Viewing Angle (Horizontal /
Vertical):
Response Time
Connectivity
11.
General Feature
8 ms
Analog D-SUB, DVI-D (Dual Link),Component, CVBS,
HDMI,Input Audio: Stereo Mini Jack,Output Audio: Stereo
Mini Jack,RS232C (In/Out), RJ45
Slim & Light LFD with Built-in Scheduler , can display
scheduled contents automatically
Built in Speaker (10W + 10W), Plug and Play ,Display PPT etc
(through USB), PIP/PBP, Narrow Bezel, Light Weight
5. Five KVA Online UPS with 60 minutes battery backup




Isolation transformer with PWM Technology, Floor mounted type suitable for single
phase AC input voltage 160V to 260V, 50+/-1.5 Hz and single phase AC output voltage
230+/1% V, 50+/-0.5 Hz.
Battery type: sealed lead maintenance free, Lead Acid tubular.
Output wave form : Pure sine wave
Warranty: 1Year on-site comprehensive warranty.
B. Specification for Wi-Fi LAN Equipments
1. UTP CAT 6 Cable
Features
Category 6 Unshielded Twisted Pair 4 pair 100 Ohm cable
shall be compliant with ANSI/TIA/EIA-568-B.2-1 upto
600 Mhz.
Category 6 UTP cables shall extend between the work area
location and its associated telecommunications closet and
consist of 4 pair, 23 AWG, UTP Non Plenum cable jacket.
The 4 pair Unshielded Twisted Pair cable should be UL
Listed and ETL Certify.
Zero-Bit error throughput test as per IEEE standards
verified by ETL
The 4 pair Unshielded Twisted Pair cable should be RoHS
Compliant
Construction: 4 twisted pairs separated by internal X
shaped, 4 channel, full separator. Half shall not be
accepted.
Conductor Solid Copper
Insulator Polyethylene
Delay Skew : 35 ns MAX
Jacket PVC
Attenuation : 22.8dB/100m at 250MHz, 29.4dB/100m at
400MHz, 39dB/100m at 600MHz
Mechanical
Characteristics
2. CAT - 6 Information outlets (I/O) with face plate and flush PVC box
Features



Surface Mount Face Plate & Box with CAT6 Work Area Data
I/O Outlet (RJ45) adhering to ETL Verification program for
compliance with TIA568B.2-1
Category 6, TIA568.B.2-1 – 600MHz
Information Outlet should be UL Listed and I/O box should be
RoHS Compliant


Material
Port
568A/B configuration
Be constructed of high impact with color and icon options for
better visual identification. Integrated hinged dust cover using
collapsible angular spring loaded shuttered technology.
 Face plate should be Single Gang square plate and Should
have provision for Labe
 ABS / UL 94 V-0
 One
3. 24 Port Gigabit Fast Ethernet Web Managed L2 POE Switch
i. Port:
24 ports 10/100/1000Base-T and 2 ports 1000Base-X, 2 Giga SFP
port
ii. Power Over Ethrenet
 Support for 802.3af,802.3AF
(PoE)
 Power per port - 31Watts for 4 ports, Rest of the ports
supports 15.4Watts
iii. Switching Capacity
52Gbps
iv. Forwarding Rate
Min 35Mpps
v. MAC address
16K
vi. Vlan
256
vii. Jumbo Frane
9K
viii. Features
 Auto Negotiation of port speed and Duplex Settings
 IEEE 802.1wrapid Spanning Tree group
 Loopback Detection
 IEEE 802.3ad Link Aggregation or equivalent
 IEEE 802.1p (Priority Queues)
 IEEE 802.1x security,
 Port based Mirroring
 Support for IPv6
ix. VLAN Support
 802.1Q VLAN
x. Management
xi. Quality of Service














Private vlan
Traffic Segmentation
VLAN protocol
GVRP
Q-in-Q
Web based management interface
Through Telnet, HTTP and NMS.
Virtual LAN Management feature.
SNMP Version 1,2c
Firmware upgrade via Web
Remote Ping
Port statistics
4 hardware queues
Strict priority, weighted round-robinPriorityQueue



xii. Security









Scheduling
Queue assignment based on DSCP and class of
service
Bandwidth Control
o Egress : min 16Kbps Granularity
o Ingress : min 16Kbps Granularity
Local Authentication with support for manual
Privilege definitions assignment
802.1x Authentication
Port Security
Automatic HTTPS redirection
DHCP Snooping
Defence Engine
IP Source Guard
Management Access Filter for
HTTP/HTTPS,SNMP,TELENT/SSH
Broadcast,Multicast,Unicast Storm Control Based
on Packets per seconds
Flow based Rate limiting based on Packets per
second (PPS)
4. 300 Mbps Wireless Access Point with PoE Support
Antenna:
Port
Push Button
Flash Memory
SDRAM:
Frequency band:
Standard compliance
Data Rate
Output power




















PiFa Antenna x 2 (2T2R MIMO Technology)
One 10/100Mbps 10/100 Ethernet Uplink port for AN
One WPS push button
Flash: 2MB
16MB
2.4000 ~ 2.4835GHz
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE802.11b
IEEE802.11g
IEEE802.11n
RADIUS (IEEE802.1x)
IEEE802.11b: 1/2/5.5/11Mbps
IEEE802.11g: 6/9/12/24/36/48/54Mbps
IEEE802.11n (20MHz): MCS0-15, up to 144Mbps
IEEE802.11n (40MHz): MCS0-15, up to 300Mbps
IEEE802.11b @ 11Mbps: 26 +/- 1.5dBm
IEEE802.11g @ 54Mbps: 24 +/- 1.5dBm
IEEE802.11n (20MHz) @ MCS15: 23 +/- 1.5dBm
IEEE802.11n (40MHz) @ MCS15: 23 +/- 1.5dBm
Wireless mode
Wireless Security
Certification:
Power
5.















Access Point
Wireless Client
Point to Point
Point to Multi Point
WDS
Universal Repeater
Protected Client Authentication
802.1x support
Static/Dynamic IEEE802.11 WEP Keys
WPA
WPA2
FCC part 15 Class B
CE
5V DC, 2A Switching Power Adapter
IEEE802.3af Power-over-Ethernet
and 6. Patch Cord Cat 6 UTP 1m and 2m
Type
Conductor
Length
Plug Protection
Warranty
Category
Housing
Terminals
Load bar
Jacket
Insulation
Unshielded Twisted Pair, Category 6, TIA / EIA 568-B.2
 24 AWG 7 / 32, stranded copper
 7-feet for workstation and 3feet for Jackpanel / equipment
 Matching colored snag-less, elastomer polyolefin boot
 25-year component warranty
 Category 6
 Clear polycarbonate
 Phosphor Bronze, 50 micron gold plating over selected area
and gold flash over remainder, over 100 micron nickel under
plate
 PBT polyester
 PVC
 Flame Retardant Polyethylene
7. Patch Panel Cat 6 UTP Modular -24 Port- Loaded 0.5U Height
Type 24-port, Unshielded Twisted Pair, Category 6, TIA / EIA 568
Keystone Krone type. Ports must be replaceable in 8 Port
Port Arrangement
Module.
Category Category 6
Circuit Identification Patch Panels Rear Cable Management without tie-wrap with
Scheme simplified numbering labels
Height . 5 U , to save the Rack space.