Motion Detector
360 Degrees
5420/360
Installation Instructions
REGISTERED DESIGN • REGISTERED PATENT
5420/360
Motion Detector Installation Instructions
Installation Instructions
The Infra-red Monitor Motion Detector from Clipsal provides high performance
detection at an affordable price. The excellent 360 degree coverage provided by the
detector is ideally suited for ceiling mount applications.
Ceiling Mounted Detectors are the perfect solution for crowded rooms where objects
may otherwise block the view of standard wall mounted detectors. Ceiling Mounted
Detectors are also highly suited for stairwells or for pinpoint high security monitoring.
The detector is compact attractive and very easy to install. It is designed for indoor
mounting on either a ceiling or where necessary on a wall. The detector is ideal
for commercial, retail, office and residential applications. Quality components and
manufacturing techniques, including 100% computer testing will ensure that the
detector provides years of trouble free operation.
Features
•
•
•
•
•
•
•
Quality Lodiff Fresnel Lens
High R.F and E.S.D immunity
Adjustable pulse count
Adjustable range
Pre Alarm pulse indication
Low 15mA current draw @ 12V d.c.
9-15V d.c. operation.
Mounting Location
The detector should be mounted on a firm section of the ceiling at a height of
between two meters and five meters and well away (at least two meters) from
electrical lighting such as neon or fluorescent lights. Cables for the detector should
be kept well away from electrical wires.
Select the mounting position for optimum coverage, noting that the coverage
provided by the detector is slightly elliptical. The elliptical pattern can be identified by
the LED position and the keyhole on the circuit board (see lens array drawing).
It is advisable with all PIR detectors not to install them pointing at direct sunlight,
heating or cooling sources and avoid high humidity locations which may cause
condensation on the lens.
© Clipsal Australia Pty Ltd
5420/360
Motion Detector Installation Instructions
Mounting
Remove
Replace
Screw
Cable
Keyhole
E1
DO NOT TOUCH
THE PYRO
DETECTOR WITH
YOUR FINGERS
1.
2.
3.
4.
5.
Screw
Remove the cover of the detector by turning the cover in an
anti-clockwise direction
Locate the base on the ceiling and screw the base in position passing the cable
through the cable entry hole. Note the slightly elliptical pattern provided by the
detector, the axis of the ellipse can be identified by the LED and the keyhole
on the circuit board with the keyhole pointing through the longest portion of the
ellipse regardless of the lid orientation (see lens array drawing)
Screw the base to the ceiling at the required position passing the wire through
the cable entry hole
If the circuit board was removed replace the circuit board
Finally, use the silicon gel to seal any holes to prevent air draughts and insects
entering the detector, which may cause false alarms.
Wiring
1.
2.
3.
Connect a regulated d.c. power source to the terminals marked +12V and 0V
observing correct polarity
Connect your zone sensing from your control panel to the terminals marked
ALARM N/C. Note these are normally closed relay contacts, which open when
the detector alarms
If you require a cover tamper, connect to the terminals marked TAMPER N/C.
Note these are normally closed switch contacts, which open when the
tamper opens.
Tamper
N/C
© Clipsal Australia Pty Ltd
Alarm
N/C
Power
+12V 0V
3 of 8
5420/360
Motion Detector Installation Instructions
Testing
1.
2.
3.
4.
5.
6.
7.
Set the range and pulse links according to application (see options settings),
the factory settings are low range, 1-2 pulse count (high sensitivity), LED ON
Replace the cover, this is the reverse process of removal. The cover may be
fitted in any three positions without affecting the coverage pattern
Apply power and wait for the LED to extinguish (approximately 20 seconds)
Conduct a walk by slowly walking across the protected area and observing the
LED. An alarm should occur at a maximum of 3 to 4 normal walking steps
Stop and wait for the alarm LED to extinguish before you continue walk testing,
continuous motion in the protected area will keep the alarm LED on constantly
Observing the LED for pre-alarm pulses will take the guesswork out of
detection coverage. A short LED pulse indicates detection of infra-red, the
alarm point is determined by the pulse link setting LK2.
Adjust your range and pulse links to suit your installation, always use the lowest
range and highest pulse count which will guarantee good coverage, this will
help to minimise the possibility of false alarms.
Options
Alarm LED LK3
The alarm LED has a dual function:
•
Pre-alarm indication (short flash)
•
Alarm indication (on for five seconds).
The LED may be disabled by removing the LED link.
Pulse Count LK2
At times it may be unavoidable to install the detector in a difficult environment.
Pulse count is a means of adjusting the number of pulses received before an alarm
is generated. In a normal environment with the jumper LK2 on, one or two pulses
should cause an alarm. In harsher environments, remove the jumper LK2 and three
to four pulses will cause an alarm.
Range LK1
The range link is a means of setting the level of infra-red required to generate a
pulse from the detector, which in turn directly affects the detector sensitivity. The
correct setting will depend upon the size of the area to protect.
With the range link on the detector will detect to the full radius of 6.4m x 4m.
With the range link removed, the detector will detect a radius of approximately 4m x
2.5m. The range link should be set to the lowest setting, which will still provide good
coverage.
Remember to always test after changing links.
4 of 8
© Clipsal Australia Pty Ltd
5420/360
Motion Detector Installation Instructions
LK3
E1
Led
Link
On
LK1
Link
Off
LK2
Range
Pulse
Specifications
Dimensions
Mounting height
Coverage
Detection zones
Alarm display
Alarm period
Warm up period
Relay output
Tamper output
Operating voltage
Current draw
Operating temperature
R.F. immunity
Pulse count
Range/sensitivity
102mm diameter, x 34mm
2.1m to 5.0m
12.8m x 8m @ 2.4m
34 dual element pyroelectric
Red LED (also used for walk test)
5 seconds
30 seconds
normally closed (fail safe) dry contacts (0.5A/24V)
with a 47-ohm resistor in series
normally closed dry contacts
(0.5A/24V) with a 70 ohm resistor in series
9-15V d.c.
15mA
0-50 degrees C
>than 15V per metre 10-1000MHz
Selectable 1-2 or 3-4 pulses
Selectable high/Low
Lens Arrays
2.4m
(8ft)
6.4m
Side View
6.4m 4.5m 2.4m 1.2m
(21ft) (15ft) (8ft) (4ft)
4m
4m
4.0m
(12ft)
Circuit
Board
0
1.2m 2.4m 4.5m 6.4m
(4ft) (8ft) (15ft) (21ft)
Top View
0
6.4m
4.0m
(12ft)
6.4m
(21ft)
© Clipsal Australia Pty Ltd
0
6.4m
(21ft)
5 of 8
5420/360
Motion Detector Installation Instructions
Two-Year Warranty
The 5420/360 Motion Sensor carries a two-year warranty against manufacturing
defects.
Warranty Statement
1) The benefits conferred herein are in addition to, and in no way shall be deemed to
derogate; either expressly or by implication, any or all other rights and remedies
in respect to Clipsal Integrated Systems product, which the consumer has under
the Commonwealth Trade Practices Act or any other similar State or Territory Laws.
2) The warrantor is Clipsal Australia Pty Ltd. with registered offices in all Australian
States.
3) This Clipsal Integrated Systems product is guaranteed against faulty workmanship
and materials for a period of two (2) years from the date of installation.
4) Clipsal Australia Pty Ltd reserves the right, at its discretion, to either repair free of
parts and labour charges, replace or offer refund in respect to any article found to
be faulty due to materials, parts or workmanship.
5) This warranty is expressly subject to the Clipsal Integrated Systems product being
installed, wired, tested, operated and used in accordance with the manufacturer's
instructions.
6) All costs of a claim shall be met by Clipsal Australia Pty Ltd, however should the
product that is the subject of the claim be found to be in good working order, all such
costs shall be met by the claimant.
7) When making a claim, the consumer shall forward the Clipsal Integrated Systems
product to the nearest office of Clipsal Australia Pty Ltd with adequate particulars
of the defect within 28 days of the fault occurring. The product should be returned
securely packed, complete with details of the date and place of purchase, description
of load, and circumstances of malfunction.
For all warranty enquiries, contact your local Clipsal sales representative. The address
and contact number of your nearest Clipsal Australia Pty Ltd office can be found at
http://www.clipsal.com/locations or by telephoning Technical Support 1 300 722 247
(CIS Technical Support Hotline).
6 of 8
© Clipsal Australia Pty Ltd
5420/360
Motion Detector Installation Instructions
Notes
© Clipsal Australia Pty Ltd
7 of 8
Technical Support and Troubleshooting
clipsal.com
F1550/02
January 2009, 103xxxxx