Vacuum Gauge Pirani Vacuum Gauge [GP-G Series] This series is a pirani vacuum gauge utilizing heat conduction of a gas. A platinum wire is used, therefore, the units will not break even at atmospheric pressure. The gauges have a wide range of applications and can easily measure pressures in the low vacuum range. Various types of interlocks and pumping sequence control are available within a set point. GP-2002G GP-1000G GP-1GRY Feat ures Interchangeable Sensor Heads Employs sensor heads from the WP series LED Monitor for Crisp Display 4.5-digits display (GP-2001G/GP-2002G) Employ DIN Standard Compact in size, 96×48DIN standard (GP-2001G/GP-2002G) Filament Material: platinum (Pt) Corrosion-resistant platinum is employed as filament material Vacuum Level Output Signal Pressure is 0 to 10V Log output Digital Output BCD output (GP-1000G) Serial Communication Specification RS232C communication (GP-1000G) A p p lic a tio n s Pressure measurement in roughing pumping systems Pressure monitoring in various vacuum pumping systems Interlocks, sequencing, and other control system related functions for practical vacuum equipment Process control of various vacuum equipment Vacuum Gauge Low Vacuum Region is Measured Constant temperature Pirani vacuum gauge that work using the thermal conduction of gas Control Output Signal Set Point : 2 pcs available from GP-1GRY/GP-2GR and 3 pcs from GP-1000G/GP-2001G/GP-2002G Pirani Vacuum Gauge [GP-G Series] Dimensions GP - 1000G Unit: mm Controller 49.5 12.5 86 84 92 2 92 2–φ4.5 99 12.5 2–M4 50 236 12.5 (Panel cutout) 49 G P - 2001G/ GP - 2002G Controller Unit: mm (Panel cutout) 44.5 91 91.5 44 48 96 12.5 123.5 (15) GP - 2G/ GP - 2GRY Unit: mm (3) 4-M5 50 95 220 210 200 (Panel cutout) GP-2G PIRANI VACUUM GAUGE CONTROL 224 240 99 10 50 POWER 90 RANGE SENSOR 250 (25) 3 M e a s u re m ent Sect i on Ga u g e H e a d Unit: mm φ40 Unit: mm WP-01 WP-02 WP-03 WP-16 WPB-10-034 φ15 Rc-3/8 NW-16 φ30 φ18 UFC–034 φ33.8 115 φ18 96 102.4 29.2 φ18 65 102.5 φ18 18 13 φ18 96 102.5 86.6 93 Detection unit (GP–H) Gauge head (WP–01) 26 88 25 36 φ15.9 Sensor head cable GP - 1GRY 84 6.7 100 39 61 8 12 89.5 48 φ56 4–M3 61 47 4–φ5 74 13 5.7 48 4-φ4 (Panel cutout) φ57.5 type [B] 48 48 8 12 27 φ74 100 13 24 48 Unit: mm type [C] 4–M4 φ 76 15 10 11 Standard type [A] (Panel cutout) 57+0.5 -0 [Common for type A , B and C] Separate control box 99 140 125 110 (Panel cutout) 59.5 90 40 100 102 3.5 107 4 56 27.5 φ56 4–φ3.6 150 98 5.7 GP-1 G GP - 1G (w ith c a s e ) 100 4–φ5.0 24 80 4-M4 (10) (Panel cutout) 160 80 80 100 φ 95 70 14 31 Unit: mm 130 92 150 (19) 86 29 Gauge Port (Opt i o n ) ∅15 ∅40 Outer Screw Sleeve O-Ring ∅18 ∅40 Gauge Port Body (54) Gauge Port Body (54) Outer Screw Sleeve O-Ring ∅28 ∅13 ∅28 PG-15 GP-1G (with case) ∅16 PG-18 GP-1G GP-2GRY Pirani Vacuum Gauge [GP-G Series] S p e c ific a tio n s Model Measurable pressure range Pressure unit Measurement locations GP-1000G GP-2001G GP-2002G 0.4 to 2700 Pa 3×10-3 to 20 Torr 4×10-3 to 27 mbar 0.4 to 3000 Pa 3×10-3 to 22.5 Torr 4×10-3 to 30 mbar Pa Pa/kPa GP-1GRY(A) GP-2GRY 0.4 to 2700 Pa 3×10-3 to 20 Torr 4×10-3 to 27 mbar ±15% 0.4 to 3000 Pa 3×10-3 to 22.5 Torr 4×10-3 to 30 mbar 2 51 to 760 Pa 3.8×10-1 to 5.7 Torr 5.1×10-1 to 7.6 mbar ±3% of full scale (linear scale conversion) to 2700 Pa ±50% 0.4 3×10-3 to 20 Torr -3 4×10 to 27 mbar (exclude 10 to 1000 Pa 7.5×10-2 to 7.5 Torr 0.1 to 10 mbar) to 3000 Pa ±50% 0.4 3×10-3 to 22.5 Torr -3 4×10 to 30 mbar (exclude 10 to 1000 Pa 7.5×10-2 to 7.5 Torr 0.1 to 10 mbar) Digital indication (LCD) 200ms linear ①DC 0 to 10V output (103 Pa (7.5 Torr, 10 mbar) f. s.) linear ②DC 0 to 10V output (102 Pa (0.75 Torr, 1 mbar) f. s.) ③Quasi-log output (1V for each range) Digital indication (LED) 100ms Analog indication ̶̶ DC1.5 to 11.5V ①Linear output 0 0 to 10V: 0 to 3000 Pa 0 to 22.5 Torr, 0 to 30 mbar ②Linear output 1 0 to 10V: 0 to 1000 Pa 0 to 7.5 Torr, 0 to 10 mbar ③Linear output 2 0 to 10V: 0 to 100 Pa 0 to 0.75 Torr, 0 to 1 mbar Set points 3 (AC100V / 0.5A MAX) DC 0 to 10mV Nonlinear output 2 (AC100V / 0.5A MAX) 3 (DC24V / 50mA MAX) DC 0 to 10V Nonlinear output ̶̶ 2 (AC100V / 0.5A MAX) ̶̶ 15VA 13VA ̶̶ 10 to 40℃ (50 to 104° F) 15 to 18% (not condensing) RS232C / BCD AC100 to 240V DC24V AC100 to 240V 10VA Dimension W×D×H Controller weight Accessories Power cable Input / output connector Operation manual Sensor head Options Detection unit Sensor head cable 50×236×99mm Controller: 1.0kg 3m×1 1 GP-2G Pa 10 to 1000 Pa 7.5×10-2 to 7.5 Torr 0.1 to 10 mbar ±30% (exclude 51 to 760 Pa 3.8×10-1 to 5.7 Torr 5.1×10-1 to 7.6 mbar) Communication serial / Digital output Operating temperature range Operating humidity range Power supply voltage GP-1G (with case) 1 Accuracy Display Sampling time Measurement value output GP-1G 96×136×48mm Controller: 90×140×100mm Meter (A-TYPE): 100×130×100mm 100×130×100mm 100×111×100mm Controller: 1.0kg Meter (A-TYPE): Meter: 0.7kg Meter: 1.4kg 0.7kg Detection unit (GP-H): 35g 3m×1 (option) 3m (with controller) ̶̶ ̶̶ 1 Various types of gauge heads including WP-01, 02, 03, 16, and WPB-10-034 GP-H, GP-BH special cable (WPB-10-034) 2, 5, 10, 15, 20, 25, 30, 50, 100m Controller: 0.4kg 240×250×99mm Controller: 2.8kg Controller: 2.7kg 3m×1 1 www.ulvac.co.jp/eng ULVAC, Inc. Components Division Overseas Sales in Japan TEL +81-467-89-2261 USA : ULVAC Technologies, Inc. GERMANY : ULVAC GmbH CHINA : ULVAC (SHANGHAI) Trading Co.,Ltd. TAIWAN : ULVAC TAIWAN, Inc. KOREA : ULVAC KOREA, Ltd. SINGAPORE : ULVAC SINGAPORE PTE LTD TEL +1-978-686-7550 TEL +49-89-960909-0 TEL +86-21-6127-6618 TEL +886-3-579-5688 TEL +82-31-683-2922 TEL +65-6542-2700 PHILIPPINES : ULVAC Singapore Philippines Branch VIETNAM : ULVAC Singapore Vietnam Representative Office THAILAND : ULVAC (THAILAND) LTD MALAYSIA : ULVAC MALAYSIA SDN. BHD. INDIA : ULVAC, Inc., India Branch This catalog is subject to change without notice. This catalog is published in order to sell this product in overseas. Please see Japanese catalog when purchasing in Japan. TEL +63-2-828-7700 TEL +84-8-62556762 TEL +66-2-312-4447 TEL +60-3-5121-4700 TEL +91-40-27007006 1840E/2012062000UYO