Industrial 10/100BASE-TX to 100BASE-FX - AV-iQ

advertisement
stand-alone
media converter
Industrial 10/100BASE-TX to 100BASE-FX
SISTM101x-1xx-LRx
Managed Redundant Industrial Switch
NEW
Incorporate Redundant Ring technology into your industrial
automation network to increase reliability and system uptime. Critical
communication needs can now be protected using redundant copper
or fiber links with switching recovery times of less than 300ms. These
8-port switches can be SNMP managed via web browser to configure
all of the latest advanced industrial networking capability including
IGMP snooping, VLANs, QoS, port mirroring and trunking.
Ordering Info
Transition Networks’s Industrial Switches are hardened devices
designed to reliably operate in harsh environments such as those
found on factory floors, outdoor enclosures or other hazardous
environments.
Industrial Redundant Ring Topologies
Standard Operating Temperature
0°C to +60°C
SISTM1010-180-LR
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
Ports 7 and 8 can be connected in a Redundant Ring
topology with recovery time of < 300ms, offering
increased uptime and increased reliability for your
most critical communication needs. While Fiber is
shown in the application, the redundant ring can be
UTP as well.
Eliminate EMI and RFI issues or overcome distance
limitations with copper based cabling by using the
Industrial Switch to convert your copper based
equipment over to fiber optics. The switch can
connect to either 10Base-T or 100Base-TX ports and
can provide redundant 100Base-FX fiber optic
connections for links up to 20 km.
SISTM1011-162-LR
(6) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (2) 100BASE-FX 1300nm MM (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
SISTM1013-162-LR
(6) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (2) 100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
SISTM1014-162-LR
(6) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (2) 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 17.0 dB
Extended Operating Temperature
-40°C to +75°C
SISTM1010-180-LRT
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
SISTM1011-162-LRT
(6) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (2) 100BASE-FX 1300nm MM (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
SISTM1013-162-LRT
(6) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (2) 100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
Features
DHCP Client Support
AutoCross™
Spanning Tree/Rapid Spanning Tree
IEEE 802.1P, 4-level priority queing
TFTP Firmware Update
IGMP Snooping V1 with Query mode
Dual Homing Application Support
Auto-Negotiation
Auto-Sensing Redundant DC Power Inputs
IEEE 802.1Q VLAN capability
Dry Contact Relays
Port Trunking/Mirroring
System Configuration Restore/Backup
Redundant Ring Switching Technology
Standard (0°C to 60°C) or extended
(-40°C to 75°C) operating temperature
(recovery time < 300ms)
SNMP trap and SMTP email trap support
SNTP Clock Synchronization
SISTM1014-162-LRT
(6) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (2) 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 17.0 dB
Optional Accessories
(sold separately)
External AC/DC Power Supply:
SPS-UA12DHT
(100-240 VAC input -25°C to +70°C
operating temperature)
Barrel connector interface cable included for
connecting external AC/DC power supply
Bandwidth Allocation
Ingress Packet Filtering
Transition Networks, Inc.
10900 Red Circle Drive
Minnetonka, MN 55343 USA
©2007 Transition Networks, Inc.
All trademarks are the property of their respective owners.
Technical information is subject to change without notice.
tel 952.941.7600 or 800.526.9267
fax 952.941.2322
info@transition.com
http://www.transition.com
Industrial 10/100BASE-TX to 100BASE-FX
stand-alone
media converter
Specifications
Standards
Dimensions
IEEE Std. 802.3™, 802.1p™, 802.1Q™,
802.3u™, 802.1d™, 802.1w™, 802.3x™
Fiber Optic Connector Specs
SKU
Min TX Max TX
RX Max In
Link
PWR
PWR Sens
PWR Budget
(dBm) (dBm) (dBm) (dBm)
(dB)
SISTM1011-162-LR(T) -19.0
SISTM1013-162-LR(T) -19.0
SISTM1014-162-LR(T) -15.0
Status LEDs
-14.0 -30.0
-14.0 -30.0
-8.0 -32.0
-14.0
-14.0
-5.0
11.0
11.0
17.0
PWR (Power): ON = power connected
R.M.: ON = Device is the Master in the
redundant ring network
PWR 1 (Power): ON = primary power
connected
PWR 2 (Power): ON = backup power
connected
Fault: ON = Fault on port link or loss of PWR
1 or PWR 2
LNK/ACT (Fiber): ON = Link on fiber
100Mb/s; Flashing = data transmitting
FDX/COL (Fiber): ON = Full duplex link on
fiber; Flashing = collisions occuring
Data Transfer Rate
10BASE-T: 14,880 pps
100BASE-TX: 148,800 pps
MAC Addresses
2K
Max Packet Size
1536 bytes
Width: 2.1" [54 mm]
Depth: 4.1" [105 mm]
Height: 5.3" [135 mm]
Ingress Protection
IP 31
Input Power
12 to 48 VDC, 0.2A, redundant inputs with
reverse polarity protection; Additional barrel
connector cable
Power Consumption -180 Models: 4.6 watts
-162 Models: 6.0 watts
Environment
0 to +60°C Std. operating temp.
-40 to +75°C Ext. operating temp.
-40 to +85°C storage temp.
5 – 95% humidity non-condensing
0 – 10,000 feet altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
UL 60950; cUL60950
EMI Compliance
CISPR22/EN55022; EN60950 Class A; FCC
Class A; CE Mark; EN61000-4-2; EN61000-43; EN61000-4-4; EN61000-4-5; EN61000-4-6
Environmental Compliance
IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
Warranty
Lifetime
Data Memory Buffer 1Mb
Backplane
2.0 Gbps
SNMP MIB
RFC 1213 MIBII, RFC 1493 Bridge MIB,
RMON RFC 1757, RFC 2674 VLAN MIB, RFC
1643 Ethernet like MIB, RFC 1215 Trap MIB
Transition Networks, Inc.
10900 Red Circle Drive
Minnetonka, MN 55343 USA
©2007 Transition Networks, Inc.
All trademarks are the property of their respective owners.
Technical information is subject to change without notice.
tel 952.941.7600 or 800.526.9267
fax 952.941.2322
info@transition.com
http://www.transition.com
Download