Industrial 10/100BASE-TX to 100BASE-FX

advertisement
stand-alone
media converter
Industrial 10/100BASE-TX to 100BASE-FX
SISTF101x-111-LRx
Industrial Media Converter
NEW
Transition Networks’s Industrial Media Converters are hardened devices
designed to reliably operate in harsh environments such as those found
on factory floors, outdoor enclosures or other hazardous environments.
Eliminate EMI and RFI issues or overcome distance limitations with
copper based cabling by using the Industrial Media Converter to
convert your copper based equipment over to fiber optics. The media
converter can connect to either 10Base-T or 100Base-TX ports and
provides a 100Base-FX fiber optic connection for links up to 20km.
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
Extend Network Distance in Industrial
Applications
Features
Auto-Negotiation (see page 14)
AutoCross™ (see page 14)
Link Pass Through (see page 15)
Included
Standard (0°C to 60°C) or extended
(-40°C to 75°C) operating temperature
SISTF1014-111-LR
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 17.0 dB
Dry Contact Relay Alarm Output
Dual Auto-Sensing Redundant DC Power Inputs
Media Converter Mode or Switch Converter Mode
Extended Operating Temperature
-40°C to +75°C
Barrel connector interface cable included for
SISTF1011-111-LRT
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
connecting external AC/DC power supply
Specifications
Dimensions
Width: 2.1" [54 mm]
Depth: 4.1" [105 mm]
Height: 5.3" [135 mm]
Standards
IEEE Std. 802.3™, 802.3u™, 802.3x™
Status LEDs
PWR (Power): ON = Unit has power
connected
PWR 1 (Power): ON = primary power
connected
PWR 2 (Power): ON = backup power
connected
Fault: ON = Power failure or port link failure
LNK/ACT (Ports 1 – 2): ON = Link;
Flashing = data transmitting
HDX/FDX (Ports 1 – 2):
ON = Full duplex mode
10/100 (UTP): ON = 100Mbps
Ingress Protection
IP 31
Input Power
12 to 48 VDC, 0.2A-0.7A, redundant inputs
with reverse polarity protection; Additional
barrel connector
1: Enable / Disable Port Alarms
2: Enable / Disable Link Pass Through
3: Full / Half Duplex 100BASE-FX
4: Converter / Switch Mode
Shipping Weight
Dip Switches
Power Consumption 4.6 watts
Environment
0 to +60°C Std. operating temp.
-40 to +75°C Ext. operating temp.
5 – 95% humidity non-condensing
0 – 10,000 feet altitude
-40 to +85°C storage temp.
2 lbs. [0.90 kg]
Safety Compliance
UL 60950; UL508; CSA C22.2 no 60950
EMI Compliance
CISPR/EN55022 Class A; FCC Class A;
CE Mark; EN61000-4-2; EN61000-4-3;
EN61000-4-4; EN61000-4-5; EN61000-4-6
Environmental Compliance
IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
Warranty
< 124 >
Visit our website at www.transition.com
SISTF1011-111-LR
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
SISTF1013-111-LR
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
DIN Rail Mounting and Wall Mount Brackets
See pages 171–181 for complete fiber optic connector specs.
Standard Operating Temperature
0°C to +60°C
Lifetime
SISTF1013-111-LRT
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
SISTF1014-111-LRT
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 17.0 dB
Optional Accessories
(sold separately)
External AC/DC Power Supply:
SPS-UA12DHT
(100-240 VAC input -25°C to +70°C
operating temperature)
Industrial 10/100BASE-TX to 100BASE-FX
stand-alone
media converter
mounting options
ethernet
fast ethernet
10/100 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
SISTF101x-141-LRx
Industrial Switch
NEW
Transition Networks’s Industrial Switches are hardened devices
designed to reliably operate in harsh environments such as those found
on factory floors, outdoor enclosures or other hazardous environments.
Eliminate EMI and RFI issues or overcome distance limitations with
copper based cabling by using the Industrial Media Converter to
convert your copper based equipment over to fiber optics. The media
converter can connect to either 10Base-T or 100Base-TX ports and
provides a 100Base-FX fiber optic connection for links up to 20km.
industrial
Extend Network Distance in Industrial
Applications
Features
Auto-Negotiation (see page 14)
Ordering Info
Standard Operating Temperature
0°C to +60°C
SISTF1011-141-LR
(4) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
AutoCross™ (see page 14)
DIN Rail Mounting and Wall Mount Brackets
Included
SISTF1013-141-LR
(4) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
Standard (0°C to 60°C) or extended
(-40°C to 75°C) operating temperature
Dual Auto-Sensing Redundant DC Power Inputs
Barrel connector interface cable included for
connecting external AC/DC power supply
SISTF1014-141-LR
(4) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 17.0 dB
Extended Operating Temperature
-40°C to +75°C
Specifications
See pages 171–181 for complete fiber optic connector specs.
Data Memory Buffer 512Kb
Standards
IEEE Std. 802.3™, 802.3u™, 802.3x™
Backplane
1.0 Gbps
Status LEDs
PWR (Power): ON = Unit has power
connected
PWR 1 (Power): ON = primary power
connected
PWR 2 (Power): ON = backup power
connected
Fault: ON = Power failure or port link failure
LNK/ACT (fiber): ON = Link;
Flashing = data transmitting
FDX/COL (fiber): ON = Full duplex mode;
Flashing = collisions occurring
RJ-45 (Ports 1 – 4):
ON orange = Full duplex mode;
Flashing orange = collisions occurring;
ON green = UTP link;
Flashing green = data transmitting
Dimensions
Width: 2.1" [54 mm]
Depth: 4.1" [105 mm]
Height: 5.3" [135 mm]
Dip Switches
1: Full Duplex Fiber / Half Duplex Fiber
Safety Compliance
UL 60950; UL508; CSA C22.2 no 60950
Data Transfer Rate
10BASE-T: 14,880 pps
100BASE-TX: 148,800 pps
EMI Compliance
MAC Addresses
1K
CISPR/EN55022; EN60950 Class A; FCC
Class A; CE Mark; EN61000-4-2;
EN61000-4-3; EN61000-4-4; EN61000-4-5;
EN61000-4-6
Ingress Protection
IP 31
Input Power
12 to 48 VDC, 0.2A-0.7A, redundant inputs
with reverse polarity protection; Additional
barrel connector
Power Consumption 3.3 watts
Environment
Shipping Weight
0 to +60°C Std. operating temp.
-40 to +75°C Ext. operating temp.
5 – 95% humidity non-condensing
0 – 10,000 feet altitude
-40 to +85°C storage temp.
2 lbs. [0.90 kg]
SISTF1011-141-LRT
(4) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
SISTF1013-141-LRT
(4) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
SISTF1014-141-LRT
(4) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 17.0 dB
Optional Accessories
(sold separately)
External AC/DC Power Supply:
SPS-UA12DHT
(100-240 VAC input -25°C to +70°C
operating temperature)
Environmental Compliance
IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
Warranty
Call us at 800-526-9267 or 952-941-7600
Lifetime
< 125 >
stand-alone
media converter
Industrial Switch 10/100BASE-TX
SISTF1010-1x0-LRx
Industrial Switch
NEW
Transition Networks’s Industrial Switches are hardened
devices designed to reliably operate in harsh environments
such as those found on factory floors, outdoor enclosures
or other hazardous environments.
Ordering Info
Features
Specifications
Auto-Negotiation (see page 14)
Standards
IEEE Std. 802.3™, 802.3u™,
802.3x™
Status LEDs
PWR (Power): ON = unit has power
connected
PWR 1 (Power): ON = primary
power connected
PWR 2 (Power): ON = backup
power connected
LNK/ACT (ports 1 – 8): ON = Link;
FLASHING = data transmitting
FDX/COL (ports 1 – 8): ON = Full
duplex mode; FLASHING = collisions
occurring
AutoCross™ (see page 14)
Standard (0°C to 60°C) or Extended operating
temperature (-40°C to 75°C)
Dual Auto-Sensing Redundant DC Power Inputs
DIN Rail Mounting and Wall Mount Brackets Included
Barrel connector interface cable included
for connecting external AC/DC power supply
Utilize Ethernet Connectivity in
Industrial Automation
Data Transfer Rate
10BASE-T: 14,880 pps
100BASE-TX: 148,800 pps
MAC Addresses
-150 models: 1K
-180 models: 2K
Data Memory Buffer -150 models: 512Kb
-180 models: 1Mb
Backplane
-150 models: 1.0 Gbps
-180 models: 1.6 Gbps
Dimensions
Width: 2.1" [54 mm]
Depth: 4.1" [105 mm]
Height: 5.3" [135 mm]
Ingress Protection
IP 31
Input Power
12 to 48 VDC; 0.2A; redundant
inputs with reverse polarity
protection
Additional barrel connector
Power Consumption -150 models: 2.8 Watts
-180 models: 4.6 Watts
Environment
0 to +60°C standard operating
temperature;
-40 to +75°C extended operating
temperature;
5% – 95% humidity noncondensing;
0 – 10,000 ft. altitude
-40 to +85°C storage temperature
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
UL 60950; UL508; CSA C22.2 no
60950
EMI Compliance
CISPR22/EN55022; EN60950 Class
A; FCC Class A; CE Mark; EN610004-2; EN61000-4-3; EN61000-4-4;
EN61000-4-5;
EN61000-4-6
Environmental Compliance
Warranty
< 126 >
Visit our website at www.transition.com
IEC60068-2-32 (Free fall);
IEC60068-2-27 (Shock);
IEC60068-2-6 (Vibration)
Lifetime
Standard Operating
Temperature: 0°C to +60°C
Extended Operating
Temperature: -40°C to +75°C
SISTF1010-150-LR (standard temp)
SISTF1010-150-LRT (extended temp)
(5) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
SISTF1010-180-LR (standard temp)
SISTF1010-180-LRT (extended temp)
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
Optional Accessories
(sold separately)
External AC/DC Power Supply:
SPS-UA12DHT
(100-240 VAC input -25°C to +70°C
operating temperature)
Industrial 10/100BASE-TX to 100BASE-FX
stand-alone
media converter
Managed Redundant Industrial Switch
NEW
Incorporate Redundant Ring technology into your industrial automation
network to increase reliability and system uptime. Critical
communication needs can now be protected using redundant copper or
fiber links with switching recovery times of less than 300ms. These 8port switches can be SNMP managed via web browser to configure all
of the latest advanced industrial networking capability including IGMP
snooping, VLANs, QoS, port mirroring and trunking.
industrial
Transition Networks’s Industrial Switches are hardened devices
designed to reliably operate in harsh environments such as those found
on factory floors, outdoor enclosures or other hazardous environments.
Features
Ordering Info
Industrial Redundant Ring Topologies
AutoCross™ (see page 14)
IEEE 802.1P, 4-level priority queuing
Auto-Negotiation (see page 14)
IEEE 802.1Q VLAN capability
Redundant Ring Switching Technology
(recovery time < 300ms)
SISTM1014-162-LR
(6) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (2) 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 17.0 dB
SNMP trap and SMTP email trap support
SNTP Clock Synchronization
Bandwidth Allocation
Extended Operating Temperature
-40°C to +75°C
Ingress Packet Filtering
DHCP Client Support
SISTM1010-180-LRT
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
Spanning Tree/Rapid Spanning Tree
TFTP Firmware Update
Dual Homing Application Support
System Configuration Restore/Backup
Specifications
IEEE Std. 802.3™, 802.1p™, 802.1Q™,
802.3u™, 802.1d™, 802.1w™, 802.3x™
Status LEDs
PWR (Power): ON = power connected
R.M.: ON = Device is the Master in the
redundant ring network
PWR 1 (Power): ON = primary power
connected
PWR 2 (Power): ON = backup power
connected
Fault: ON = Fault on port link or loss of PWR
1 or PWR 2
LNK/ACT (Fiber): ON = Link on fiber
100Mb/s; Flashing = data transmitting
FDX/COL (Fiber): ON = Full duplex link on
fiber; Flashing = collisions occurring
Data Transfer Rate
Standard (0°C to 60°C) or extended
(-40°C to 75°C) operating temperature
Barrel connector interface cable included for
connecting external AC/DC power supply
Dimensions
Standards
10BASE-T: 14,880 pps
100BASE-TX: 148,800 pps
MAC Addresses
2K
Max Packet Size
1536 bytes
Data Memory Buffer 1Mb
Backplane
2.0 Gbps
SNMP MIB
RFC 1213 MIBII, RFC 1493 Bridge MIB,
RMON RFC 1757, RFC 2674 VLAN MIB, RFC
1643 Ethernet like MIB, RFC 1215 Trap MIB
SISTM1010-180-LR
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
SISTM1013-162-LR
(6) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (2) 100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
Port Trunking/Mirroring
Dry Contact Relays
Standard Operating Temperature
0°C to +60°C
SISTM1011-162-LR
(6) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (2) 100BASE-FX 1300nm MM (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
IGMP Snooping V1 with Query mode
Auto-Sensing Redundant DC Power Inputs
mounting options
ethernet
fast ethernet
10/100 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
SISTM101x-1xx-LRx
Width: 2.1" [54 mm]
Depth: 4.1" [105 mm]
Height: 5.3" [135 mm]
Ingress Protection
IP 31
Input Power
12 to 48 VDC, 0.2A, redundant inputs with
reverse polarity protection; Additional barrel
connector cable
Power Consumption -180 Models: 4.6 watts
-162 Models: 6.0 watts
Environment
0 to +60°C Std. operating temp.
-40 to +75°C Ext. operating temp.
-40 to +85°C storage temp.
5 – 95% humidity non-condensing
0 – 10,000 feet altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
UL 60950; cUL60950
EMI Compliance
CISPR22/EN55022; EN60950 Class A; FCC
Class A; CE Mark; EN61000-4-2; EN61000-43; EN61000-4-4; EN61000-4-5; EN61000-4-6
Warranty
Lifetime
SISTM1011-162-LRT
(6) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (2) 100BASE-FX 1300nm MM (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
SISTM1013-162-LRT
(6) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (2) 100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
SISTM1014-162-LRT
(6) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (2) 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 17.0 dB
Optional Accessories
(sold separately)
External AC/DC Power Supply:
SPS-UA12DHT
(100-240 VAC input -25°C to +70°C
operating temperature)
< 127 >
Download