s o lu t i o n s i n l i g h t
Thermal Pads
for LumiBright Products
TM
Innovations in Optics offers several options in thermal management
to assure electrical isolation and high thermal performance of our
products.
Silicone Thermal Pad (Sil-Pad*):
• Used with LumiBright Light Engines, Tapers,
Projectors, Fiber-coupled devices, and Boards
• Appropriate sizes to fit all above products
* Sil-Pad is a registered trademark of the Bergquist Company
Pyrolytic Graphite Pad (PGS*):
• Highly thermally conductive
• Stable heat resistance
• Used with LumiBright Light Engines, Tapers,
Projectors, Fiber-coupled devices, and Boards
• Appropriate sizes to fit all above products
* PGS is a registered trademark of Panasonic
Thermal Grease:
• Stable heat resistance
• Minimal bleed or evaporation over time
• Used with LumiBright Light Engines, Tapers,
Projectors, Fiber-coupled devices, and Boards
• Appropriate sizes to fit all above products
* Speak with a Sales Engineer for further information about this option
Refer to Table 2 for thermal characteristics
***
Refer to Figure 1 for additional accessories
1
Copyright © 2013 Innovations in Optics. All rights reserved.
82 Cummings Park, Woburn, MA 01801
p: (781) 933-4477 f: (781) 933-0007
www.innovationsinoptics.com
info@innovationsinoptics.com
DS-Thermalpad-130221
PRELIMINARY
lu m i b r i g h t p r o d u c t s
t h e r m a l pa d s
pa r t n u m b e r
Table 1
Thermal Pad Number
Sil-Pad
2400B-114
Y
2400B-131
2600N-113
PGS
Y
Y
2600N-116
Y
2600A-010
Y
1250B-112
Y
E x a m p l e : 2400B-114
* Speak with a Sales Engineer to choose the correct thermal solution for your product.
2
Copyright © 2013 Innovations in Optics. All rights reserved.
82 Cummings Park, Woburn, MA 01801
p: (781) 933-4477 f: (781) 933-0007
www.innovationsinoptics.com
info@innovationsinoptics.com
DS-Thermalpad-130221
PRELIMINARY
lu m i b r i g h t p r o d u c t s
t h e r m a l pa d s
Table 2
Thermal Characteristics
Silicone/Fiberglass Pad
(SIL)
Pyrolytic Graphite Pad
(PGS)
Heat Transfer
Good
Excellent
Thickness
.229 mm
0.10 +/- 0.05 mm
Density
Thermal conductivity
1.0 g/cm3
1.6 W/m*K
400-500 W/m*K
Electrical conductivity
10000 S/cm
Heat resistance
400°C
Continuous use temperature
-60°C - 180°C
Thermal impedance
0.61°C-in2/W (@50psi)
accessories
Figure 1
Cooling Fans
LumiBright DR Driver/
Controller
Heat Sinks
Heat Pipes
Wire Harness Assemblies
The products, their specifications and other information appearing in this document are subject to change by Innovations in Optics, Inc. (IOI) without notice. IOI assumes
no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein.
None of the information provided herein should be considered to be a representation of the fitness or suitability of the product for any particular application or as any
other form of warranty. IOI product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products. Nothing herein
is to be construed as constituting an additional warranty. No information contained in this publication may be considered as a waiver by IOI of any intellectual property
rights that IOI may have in such information. LumiBright™ is a trademark of IOI, all rights reserved. This product is protected by U.S. Patents and Patents Pending in the
U.S. and other countries.
3
Copyright © 2013 Innovations in Optics. All rights reserved.
82 Cummings Park, Woburn, MA 01801
p: (781) 933-4477 f: (781) 933-0007
www.innovationsinoptics.com
info@innovationsinoptics.com
DS-Thermalpad-130221
PRELIMINARY