CFT8/CFTD8
8" Horizontal Triple Tube Downlights
One or Two 26W, 32W, or 42W Triple Tube Lamps
C O M PAC T F L U O R E S C E N T
FEATURES
• Multi-watt (26W, 32W, or 42W), multi-volt (120V-277V) electronic ballast
• Electronic ballasts standard with end of life protection
• Single housing for 26W, 32W, or 42W lamps and open or wall wash reflector
• Virtual Source® optics provide symmetrical appearance and distribution as well as consistency
of appearance among fixture types
• Same housing accommodates open downlight, wall wash, and regressed lens reflectors.
• Optional lens regressed above ceiling for consistency with nearby open downlights.
Virtual Source® optics preserved with use of clear lens.
• B24 and B6 bar hangers sold separately
• Non-IC. Suitable for damp location and through wiring. Wet location listed with lensed trims
• Luminaires are certified by a National Recognized Testing Lab (NRTL), either UL or CSA.
CFT832HEB
ORDERING INFORMATION
EXAMPLE: CFT832HEB - STFD802HWT - B6 LP32T30K
-
CFT832HEB
HOUSING
CFTD832HEB556,8
Triple tube, multi-volt
electronic ballast
8", (2) 26W/32W/42W
Triple tube, multi-volt
electronic ballast
8", (2) 26W/32W/42W
Triple tube, multi-volt
electronic ballast.
Compatible with high
efficiency reflector
REFLECTOR FINISH
STF802H 8" Alzak for
CFT8 housings
STFD802H 8" Alzak
STFD802H558
for CFTD8
housings
8" Alzak
for CFTD8
housings high
efficiency
reflector
Blank Specular
SS Semi-Specular
MFC American
HOUSING OPTIONS
DM6 Electronic dimming ballast to 5%, 4-wire, 0-10V, (120V thru 277V)
ECDM11 Lutron EcoSystem or 3-wire line voltage dimming ballast
Matte™
REFLECTOR COLORS
Blank Clear Alzak
CG Champagne Gold
BL
WE
LW
PW
7,9,8
BC
WC7,9,8
Alzak
Black Alzak
Wheat Alzak
Light Wheat
Pewter Alzak
Painted black cone
Painted white cone
(120V-277V) Dims to 5%
REFLECTOR
OPTIONS
HDM5,6 Lutron Hi-Lume® Dimming Ballast to 1%, 3-wire (specify voltage
and wattage)
2DM5,6 Lutron Tu-Wire® Dimming Ballast to 5%, 2-wire line voltage (120V
7DM6
XDM
6
SYL
EM3
EMR4
MW26
MW32
CP2
CDN
CDN 347V1
FSDFA
RIF1
SMT
CL10 Clear lens
PL10 Prismatic lens
DL10 Diffuse lens
only) Specify wattage
Advance Mark 7™ Dimming Ballast to 5%, 0-10V, analog (120V thru
277V) (specify wattage)
Advance Mark 10™ Dimming Ballast to 5%, 2-wire line voltage
(specify supply voltage/wattage)
Osram Sylvania® Ballast
Emergency Battery Pack with integral test switch and indicator light
(open trims only)
Emergency Battery Pack with remote test switch and indicator light
Max Wattage Label, 26W
Max Wattage Label, 32W
Chicago Plenum
Canadian electrical code compliant ballast disconnect
Canadian electrical code compliant ballast disconnect
Fuse kit installed at factory
Radio interference filter (single circuit)
Philips Advance SmartMate® ballast
FL Regressed fresnel lens
WT Painted white self10
flange
Wall Wash
WW3
TRG Trim ring gasket
BB
WB3,7,9
3,7,9
(factory installed)
Painted black baffle
Painted white baffle
LAMP ACCESORIES
LP_ Specify Wattage =
hangers for T-bar ceilings
26, 32, or 42
Specify type =
T (triple 4-pin)
Specify Temperature
= 27K, 30K, 35K, 41K
(Kelvin)
B6 Set of two (2) bar hangers
for ceiling joists up to 24"
centers
Signos83,9 Architectural decorative
trim elements. Refer to
page 243
FSDFI Fuse kit for field
installation
SCA8D_3,9 Sloped ceiling adapter
for 8" housings. Please
specify degree of slope
and type of ceiling. Slope
ceiling adapter and
housing must be installed
at the same time.
NOTES
1
2
3
4
5
6
7
8
9
Dimming options not available in 347V
Top access required to service ballast
for Chicago Plenum
Not valid with lensed trim
Remote mount test switch and indicator light for use with lensed trim
Not available with 42W lamps
For 26W, 32W, or 42W CFL lamps specify CFT826HEB, CFT832HEB,
CFT842HEB, or CFTD832HEB housing and add desired dimming option suffix
All painted cones and baffles come standard with upper portion of reflector
as Specular clear Alzak
High Efficiency Reflectors must be ordered in conjunction with appropriate
'55' housing. Not compatible with MFC, lensed, cones, or WW options, or
cones
Not available for wall wash
Regressed reflectors come standard with upper portion of reflector painted
white
For 42W specify CFT842HEBECDM or CFT842HEB55ECDM
Virtual Source® Optics
Virtual Source 55® Optics
17-1/2"
W/ EM
* Dimensions shown are with
standard reflector. See spec.
sheet for '55' dimensions.
Clear
Pewter
Black
Champagne Gold
Wheat
Light Wheat
15-3/8"
Ceiling Cutout = 8-1/4"
Maximum Ceiling Thickness = 1-1/4"
CFT8
206
ACCESSORIES
11
11-3/4"
9"
LP32T30K
8-1/8"*
W/EM
1-1/4"
7-3/4"
-
B6
B24 Set of two (2) 24" bar
10
14-3/8"
W/O EM
7-1/8"*
W/O EM
-
WT
REFLECTORS
CFT832HEB 8", (1) 26W/32W/42W
CFTD832HEB6
STFD802H