G9EA-1 - Omron

advertisement
G9EA-1
DC Power Relays (60-A, 100-A Models)
DC Power Relays Capable of Interrupting
High-voltage, High-current Loads
• A compact relay (73 x 36 x 67.2 mm (L x W x H)) capable of switching 400-V
60-A DC loads. (Capable of interrupting 600 A at 300 VDC max.)
• The switching section and driving section are gas-injected and hermetically
sealed, allowing these compact relays to interrupt high-capacity loads. The sealed
construction also requires no arc space, saves space, and helps ensure safe
applications.
• Downsizing and optimum design allow no restrictions on the mounting direction.
• Terminal Cover and DIN Track Adapters are also available for industrial
applications.
• UL/CSA standard UL508 approved.
RoHS Compliant
Refer to "DC Power Relays Common Precautions".
■Model Number Legend
3. Coil Terminals
B: M3.5 screw terminals
Blank: Lead wire output
1. Number of Poles
1: 1 pole
G 9 E A -@-@-@-@
— — — —
1 2 3 4
2. Contact Form
Blank: SPST-NO
G
9
E
A
4. Special Functions
CA: High-current conduction (100 A)
-
■List of Models
1
Terminals
Classification
Coil terminals
Contact terminals
Switching/current
conduction models
Screw terminals
High-current conduction
models
Screw terminals
Lead wires
Contact form
Rated coil voltage
SPST-NO
12 VDC
24 VDC
48 VDC
60 VDC
100 VDC
Screw terminals
Lead wires
Model
G9EA-1-B
G9EA-1
G9EA-1-B-CA
G9EA-1-CA
Note 1. Two M5 screws are provided for the contact terminal connection.
Note 2. Two M3.5 screws are provided for the coil terminal connection.
■Ratings
●Coil
Item
Rated voltage
Rated current
(mA)
Coil resistance
(Ω)
12 VDC
417
28.8
24 VDC
208
115.2
48 VDC
102
60 VDC
86.2
100 VDC
53.6
Must-operate voltage
(V)
Must-release voltage
(V)
Maximum voltage
(V)
75% max. of rated
voltage
8% min. of rated
voltage
130% of rated
voltage (at 23°C
within 10 minutes)
469.3
695.7
1864
Power consumption
(W)
Approx. 5 W
Approx. 5.2 W
Approx. 5.4 W
Note 1. The figures for the rated current and coil resistance are for a coil temperature of 23°C and have a tolerance of ±10%.
Note 2. The figures for the operating characteristics are for a coil temperature of 23°C.
Note 3. The figure for the maximum voltage is the maximum voltage that can be applied to the relay coil.
●Contacts
Item
Resistive load
G9EA-1(-B)
G9EA-1(-B)-CA
60 A at 400 VDC, 100 A at 120 VDC
30 A at 400 VDC
Rated carry current
60 A
100 A
Maximum switching voltage
400 V
400 V
Maximum switching current
100 A
30 A
Rated load
1
G9EA-1
DC Power Relays (60-A, 100-A Models)
■Characteristics
Item
G9EA-1(-B)
G9EA-1(-B)-CA
Contact resistance 1
Model
30 mΩ max. (0.6 mΩ typical)
10 mΩ max. (0.3 mΩ typical)
Contact voltage drop
0.1 V max. (for a carry current of 60 A)
Operate time
Release time
30 ms max.
Insulation
resistance
Between coil and contacts
1,000 MΩ min.
Dielectric
strength *2
Between coil and contacts
2,500 VAC, 1 min
Between contacts of the same polarity
2,500 VAC, 1 min
Between contacts of the same polarity
1,000 MΩ min.
Impulse withstand voltage *3
Vibration
resistance
Shock
resistance
4,500 V
Destruction
10 to 55 to 10 Hz, 0.75-mm single amplitude (Acceleration: 2.94 to 88.9 m/s2)
Malfunction
10 to 55 to 10 Hz, 0.75-mm single amplitude (Acceleration: 2.94 to 88.9 m/s2)
Destruction
490 m/s2
Malfunction
196 m/s2
Mechanical endurance *4
200,000 ops. min.
Electrical endurance (resistive load) *5
120 VDC, 100 A, 3,000 ops. min.
400 VDC, 30 A, 1,000 ops. min.
400 VDC, 60 A, 3,000 ops. min.
120 VDC, 30 A, 2,500 ops. min.
400 VDC, 30 A, 30,000 ops. min.
−
100 A (10 min)
150 A (10 min)
Short-time carry current
600 A at 300 VDC (5 times)
−
180 A at 400 VDC (100 times min.)
100 A at 120 VDC (150 times min.)
−60 A at 200 VDC (1,000 times min.)
−
Maximum interruption current
Overload interruption
Reverse polarity interruption
−40 to 70°C (with no icing or condensation)
Ambient operating temperature
5% to 85% RH
Weight (including accessories)
Approx. 310 g
Note. The above values are initial values at an ambient temperature of 23°C unless otherwise specified.
*1. The contact resistance was measured with 1A at 5VDC using the voltage drop method.
*2. The insulation resistance was measured with a 500-VDC megohmmeter.
*3. The impulse withstand voltage was measured with a JEC-212 (1981) standard impulse voltage waveform (1.2 × 50 μs).
*4. The mechanical endurance was measured at a switching frequency of 3,600 operations/hr.
*5. The electrical endurance was measured at a switching frequency of 60 operations/hr.
■Engineering Data
G9EA-1(-B) Switching/Current Conduction Models
500
300
G9EA-1
DC resistive load
100
5
Switching 120-VDC resistive
load (positive direction)
3
500
300
0.5
30
0.3 Switching 400-VDC
resistive load
(positive direction)
10
0.1
5
0.05
3
0.03
10
30
50
100
300
500 1,000
Switching voltage (V)
● Carry Current vs Energizing Time
100,000
10,000
1,000
100
10
1
10
30
50
100
300
500 1,000
Carry current (A)
10,000
5,000
3,000
1,000
1
50
1
2
10
● Electrical Endurance (Interruption
Performance)
Operations
1,000
● Electrical Endurance (Switching
Performance)
Operations (x 10,000)
● Maximum Switching Capacity
Switching current (A)
1
Ambient operating humidity
Energizing time (s)
G
9
E
A
0.1 V max. (for a carry current of 100 A)
50 ms max.
100
50
30
Interrupting 400-VDC resistive
load (positive direction)
10
5
3
1
0.01
10
30
50
100
300
500 1,000
Switching current (A)
10
30
50
100
300
500 1,000
Switching current (A)
G9EA-1
DC Power Relays (60-A, 100-A Models)
G9EA-1(-B)-CA High-current Conduction Models
1,000
500
300
100
● Carry Current vs Energizing Time
Energizing time (s)
● Electrical Endurance (Switching
Performance)
Operations
Contact current (A)
● Maximum Switching Capacity
10,000
5,000
3,000
Switching 120-VDC resistive
load (positive direction)
1,000
G9EA-1-CA
DC resistive load
50
500
30
300
10
100
5
50
3
30
100,000
10,000
1,000
100
1
10
30
50
100
300
10
1
10
500 1,000
10
30
50
100
Switching voltage (V)
300
10
500 1,000
30
50
100
300
500 1,000
Carry current (A)
Switching current (A)
All G9EA-1 Models
Sample: G9EA-1
Number: 35
Must-operate voltage
Must-release voltage
25
20
15
20
Sample: G9EA-1
Number: 35
Operate time
Release time
15
● Vibration Malfunction
Single amplitude (mm)
30
● Time Characteristic Distributions
Number of contacts
Number of Relays
● Must-operate Voltage and
Must-release Voltage
Distributions
10
1
Sample: G9EA-1
Number: 5
0.9
Unconfirmed area
0.8
0.7
0.6
G
9
E
A
0.5
Confirmed area
0.4
0.3
-
10
0.2
1
5
5
0.1
20
40
60
80
100
0
5.0
0
10.0
15.0
20.0
25.0
Percentage of rated voltage (%)
Rate of change (%)
● Vibration Resistance
10.0
8.0
Sample: G9EA-1
Number: 5
● Shock Malfunction
Unit: m/s2
Sample: G9EA-1
Number: 5
Y
2(-
X
)
)
CT:
VDC
400
1-BCONTA
A- 60A
C
G9E
01
VDJAPAN
-00
2K1
12DE IN
136
MA
Lot
600
No.
Z’
Z
X
Y’
Y X’
Z
400
2.0
Must-release voltage
5
10
30
50
100
Frequency (Hz)
10.0
8.0
Sample: G9EA-1
Number: 5
6.0
4.0
2.0
200
Must-operate voltage
0.0
0.0
−2.0
3
● Shock Resistance
1,000
800
4.0
1
Time (ms)
1(+
6.0
30.0
Rate of change (%)
0
Must-operate voltage
−4.0
−6.0
−8.0
−10.0
Start
After test
Characteristics were measured after applying vibration
at a frequency of 10 to 55 Hz (single amplitude of 0.75
mm) to the test piece (not energized) for 2 hours each
in 3 directions. The percentage rate of change is the
average value for all of the samples
−2.0
200
Deenergized
Z’
−4.0
400
600
800
Must-release voltage
X’
Energized
1,000
Y’
The value at which malfunction occurred was
measured after applying shock to the test piece
3 times each in 6 directions along 3 axes.
−6.0
−8.0
−10.0
Start
After test
Characteristics were measured after applying a shock
2
of 490 m /s to the test piece 3 times each in 6
directions along 3 axes. The percentage rate of
change is the average value for all of the samples.
3
G9EA-1
DC Power Relays (60-A, 100-A Models)
■Dimensions (Unit: mm)
● Models with Screw Terminals
G9EA-1-B(-CA)
Terminal Arrangement/
Internal Connections
(TOP VIEW)
2-M5
1(+)
7
24
36
)
1(+
2-M3.5
)
2(-
B
-1EA
G9VDCPAN
1A2DE IN JA
M
o.
tN
2(−)
T:
AC C
NT 0VD
CO 40
A
60
2
7
01
-00
Note: Be sure to connect terminals
with the correct polarity.
Coils do not have polarity.
47
61
73
Two, 6.2-dia. holes
Mounting Hole Dimensions
(TOP VIEW)
Two, M6 or 6.5-dia. holes
15.3
15.2
1(+)
2(−)
Dimension (mm)
8
17.5
K1
62
13
Lo
Tolerance (mm)
10 or lower
±0.3
10 to 50
±0.5
G9EA-1-B
12VDC CONTACT:
60A 400VDC
MADE IN JAPAN
39.7
(Coil terminal
height)
±1
50 or higher
67.2
60.7
(Terminal
height)
61±0.1
Lot No. 1362K1-0001
10.5
24±0.1
● Models with Lead Wires
G9EA-1(-CA)
Terminal Arrangement/
Internal Connections
(TOP VIEW)
2-M5
1(+)
G
9
E
A
24
)
1(+
36
2(-)
-
1
EAG9 DC N
1A2DVE IN JAPA
M
1
Lot
No.
2(−)
CT:
NTA DC
CO 400V
60A
2
17.5
15.2
(10)
230±20
8
4
10 or lower
±0.3
10 to 50
±0.5
50 or higher
±1
Two, M6 or 6.5-dia. holes
1(+)
G9EA-1
12VDC
MADE IN JAPAN
Tolerance (mm)
Mounting Hole Dimensions
(TOP VIEW)
15.3
2(−)
7
8
Note: Be sure to connect terminals with the
correct polarity. Coils do not have
polarity.
47
61
73
Two, 6.2-dia. holes
Dimension (mm)
7
1
-000
K1
1362
CONTACT:
60A 400VDC
67.2
60.7
(Terminal
height)
61±0.1
Lot No. 1362K1-0001
10.5
24±0.1
G9EA-1
DC Power Relays (60-A, 100-A Models)
■Options (Unit: mm)
● Terminal Cover
P9EA-C
17 * 31
P9
MA
DE
IN
36
EA
-C
JAP
AN
>P
C<
C-A
E9P
13.2* 21
N
<CP APAJ
NI E
>
D
AM
6
17 *
17 *
49
Note: Be sure to remove the
cutouts for wiring that are
located in the wiring outlet
direction before installing
the Terminal Cover.
Dimension (mm)
10 or lower
Tolerance (mm)
±0.3
10 to 50
±0.5
50 or higher
±1
Dimension (mm)
Tolerance (mm)
2-M5
P9EA-D
61±0.1 88
24±0.1
50
12
10 or lower
±0.3
10 to 50
±0.5
50 or higher
±1
G
9
E
A
-
● DIN Track Adapter
P9EA-D
* Dimensions of cutouts for wiring.
1
5
G9EA-1
DC Power Relays (60-A, 100-A Models)
-
G
9
E
A
1
• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.
• Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad
systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious
influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or
equipment, and be sure to provide the system or equipment with double safety mechanisms.
Note: Do not use this document to operate the Unit.
OMRON Corporation
Electronic and Mechanical Components Company
6
Contact: www.omron.com/ecb
Cat. No. J186-E1-01
0812(0207)(O)
Download