Fire-resistant mortise
door locks.
Fire-resistant mortise door
locks and accessories.
nemef.com
ASSA ABLOY, the global leader
in door opening solutions
Fire-resistant mortise
door locks.
Nemef guarantees an extensive and continually growing assortment of locks and builders’ hardware, such
as door locks, profile cylinders, multi-point locks and access control. These quality products that leave
the Nemef plant reach their customers quickly and efficiently due to a hypermodern distribution centre
in the Netherlands. Nemef is working today on the standard for tomorrow through innovative product
development focused on contemporary user convenience. Within this brochure we give an overview of
our fire resistant mortise door locks and accessories.
Information
Page
Information about locks
5
EN Standards
Overview of the European standards for building hardware
1730 Serie
Fire-resistant mortise locks
15
1759 Serie
(non fire-resistant)
Special mortise locks
16
1769 Serie
17
1769/88 and 699
Fire-resistant mortise locks Self-closing panic locks
1729 and 1723 Serie
Fire-resistant mortise multi-point locks
22
1749 and 1742 Serie
Fire-resistant mortise multi-point locks
24
1900 Serie
Fire-resistant panic mortise locks for one and two leaf doors
26
3600 Serie
Panic bar ‘Smart’
28
9670/08
Fire-resistant narrow-style panic locks
31
Accessories
1900 and 3600 Series
32
2900 Serie
Fire-resistant door handles
34
1012 Serie
Fire-resistant door hinges
39
Fire resistant plates
Fire resistant plates
40
Strike plates
Strike plates
41
Accessories
Accessories
42
Certificates
Certificates ISO 9001, EN 179 and EN 1125
43
7
20
In the future we’ll also meet the demands for technical advances and innovations. We therefore reserve the right to make design
modifications. Illustrations may thus also vary from the actual products. Despite the greatest of care, printing errors or mistakes
may be made. Nemef accepts no responsibility in such cases and will not enter into any obligations of any kind. No responsibility
is taken for the correctness of any safety regulations reproduced.
3
4
Information about locks.
Do not fix a knob profile
cylinder in lock of
panic doors.
Do not paint front,
dead- and latch bolt.
Do not leave a key in
the lock of panic locks.
Do not fit the square
spindle with force.
If door furniture is not
fixed do not throw dead
bolt. Locks must be
replaced when signs of
damage are obvious.
Do not force door trim.
Do not drill through
lockcases.
International
Situation Symbols
DIN Left (1)
DIN Right (2)
DIN Left (3)
DIN Right (4)
inside
inside
outside
outside
5
6
Overview of the European
EN Standards for building hardware.
What are the
advantages of an
EN-tested product?
• Resistance/reliability.
• Durability.
• Safety.
• Ease-of-use.
• Guaranteed operability.
• Dimensions.
• Mechanical resistance.
Where do the
standards apply?
In public buildings
• Hospital.
• Shopping centre.
• Station.
• Airport.
In private buildings
• Apartment block.
• Office.
EN 179
• Emergency exit devices operated by a lever
handle or push pad, for use on escape routes.
• Requirements and test methods.
EN 1125
• Panic exit devices operated by a horizontal bar,
for use on escape routes.
• Requirements and test methods.
EN 12209
• Locks and latches.
• Mechanically operated locks, latches and
locking plates.
• Requirements and test methods.
EN 1935
DIN 18250
Fire-resistant door hinges.
Mortise locks for fire- and smoke resistant doors.
DIN 18273
Doorhandles for fire- and smoke resistant doors.
CE marking
Mechanically operated locks, latches and panic
and emergency exit devices intended for use on
fire/ smoke control doors within the European
Economic Area are covered by Construction
Products Directive mandate issued by the European
Commission. Consequently, this standard is
regarded as “harmonised” and compliance with
it, supported by suitable evidence, allows for the
application of the CE mark.
7
EN 179 Emergency exit devices operated by
a lever handle or push pad, for use on escape
routes - Requirements and test methods.
Use
Emergency situations where the occupants know
the building, its escape routes and emergency
exits and where panic situations are hardly to be
expected; for example, in offices or apartment
blocks.
Door weight
• Operation tested between -10°C and +60°C.
• U-shaped lever on the inside in order to minimise
the risk of injury, and a minimum length of
120 mm (measured from the centre of the lever
pivot pin to the extreme edge of the lever).
• Protrusion of the operating element:
- maximum of 150 mm in category 1.
- maximum of 100 mm in category 2.
•The exterior means of operation (key, cylinder,
lever handle or knob) must be approved by the
manufacturer of the emergency exit device.
•The force required to unlock an emergency exit
device with a lever handle => less than 70 N.
•The force required to unlock an emergency exit
device with a push pad (also known as pushing
force) => less than 150 N.
• Durability:
- 100,000 test cycles for grade 6.
- 200,000 test cycles for grade 7.
Durability
Specifications for the
locking mechanism
for emergency exits in
accordance with the
EN 179 standard
Category of use
The emergency exit devices in accordance with
standard EN 179 are intended to ensure a safe and
efficient escape route via an emergency exit door
that can be opened with one simple action.
1
2
3
100,000
test cycles.
6
200,000
test cycles.
7
3
High frequency of use by the public
and others, where the situation may
lead to rough use.
8
up to 100 kg.
5
up to 200 kg.
6
>200 kg.
7
Classification EN 179: 2008.
Security
Operating element
Type of operation
Application
• Mechanical locks with a panic function and
automatic locking.
Lock types: e.g. Art. 1769/36, 1769/46 and 1769/88.
Corrosion resistance
Nemef products that
comply with the
EN 179 standard
Safety
The EN 179 standard uses a 10 digit code to classify
the emergency exit facility.
Fire resistance
Classification
4
5
6
7
8
9
10
1
All exit devices for emergency
exit doors have a critical safety
function. This standard is
specially intended for this.
0
Not suitable for use on fire doors
and/or smoke containment doors.
A
Suitable for use on smoke containment doors
(in accordance with the requirements specified
in the standard).
B
Suitable for use on fire doors and smoke
containment doors (according to EN 1634-1).
3
High.
4
Very high.
2
1000 N.
3
2000 N.
4
3000 N.
5
5000 N.
Single-leaf or double-leaf
door opening to the
outside: active or
passive leaf.
1
2
A
Maximum projection
of 150 mm.
Single leaf door
opening to the outside.
B
Passive leaf of double
door that opens to
the outside.
C
Single leaf door
opening to the inside.
D
Maximum projection
of 100 mm.
Note: Additional requirements for tests
for a higher level of safety may not lead
to a reduction relative to the other
requirements in this standard.
A
Door lever handle.
B
Door lever handle/push pad.
9
EN 1125 Panic exit devices operated by
a horizontal bar, for use on escape routes Requirements and test methods.
Panic exit devices are available as complete facefit units or as face fit units in combination with
a mortise lock. The exterior face to exterior face
dimension of a panic exit device must match the
total door width as accurately as possible, but may
never be less than 60% of the total door width.
Specifications for the
locking mechanism
for emergency exits in
accordance with the
EN 1125 standard.
10
• Operation tested between -10°C and +60°C.
•All sharp edges must be rounded to a minimum
radius of 0.5 mm.
•The distance between the bar and the door leaf
surface may not be less than 25mm.
• Protrusion of the operating element:
- maximum of 150 mm in category 1.
- maximum of 100mm in category 2.
•The exterior means of operation (key, cylinder,
lever handle or knob) must be approved by the
manufacturer of the panic exit device.
•The force required for unlatching a panic exit
device in a situation where the door is not under
load => less than 80 N.
•The force required for unlatching a panic exit
device in a situation where the door is under
load => less than 220 N.
• Durability:
- 100,000 test cycles for grade 6.
- 200,000 test cycles for grade 7.
Door weight
Consequently, it offers a safe way of escaping the
building even when the door is subjected to load
(i.e. even when a person pushes against the door
and not on the bar, one should still be able to open
the door by pressing the panic bar). The panic exit
devices are opened by a horizontal bar.
There are two types:
- Type A, panic exit devices with a push bar: the bar
moves through an arc in the downward direction.
- Type B, panic exit devices with a touch bar: this is a
bar which is pushed in the direction of opening.
Durability
A panic exit device (also called panic hardware) is
used to allow operation of an emergency exit door
in a safe, secure and efficient way, with a minimal
force and without prior knowledge of the system.
A panic exit device in accordance with the EN 1125
standard is used where a large number of people
can be expected who, in an emergency situation,
are neither familiar with the escape routes nor the
escape provisions.
Category of use
Use
1
2
3
100,000
test cycles.
6
200,000
test cycles.
7
3
High frequency of use by the
public and others, where the
situation may lead to rough use.
Up to 100 kg.
5
Up to 200 kg.
6
>200 kg.
7
Classification EN 1125: 2008.
Classification
The EN 1125 standard uses a 10 digit code to classify
the emergency exit facility.
Nemef products that
comply with the
EN 1125 standard
All face-fit panic bar exit devices in the Nemef range
comply with the EN 1125 standard.
Fire resistance
Safety
Corrosion resistance
Security
Operating element
Operation type
Application
The panic bar exit devices with integral lock (tested
together) that comply with the EN 1125 standard are:
Lock types: e.g. Art. 1901 and 1921.
On condition that the exit can always be used via
the lever handle on the inside, the norm does not
allow monitoring of the exit.
4
5
6
7
8
9
10
The horizontal
push rod/bar can
withstand a force of
1000 N (100 kg).
1
All exit devices for emergency
exit doors have a critical safety
function. This standard is
specially intended for this.
2
1
2
0
Not suitable for use on fire doors
and/or smoke containment doors.
A
Suitable for use on smoke containment
doors (in accordance with the requirements
specified in the standard).
B
Suitable for use on fire doors and smoke
containment doors (according to EN 1634-1).
3
High (96 hour
salt spray test).
4
Very high (240 hour
salt spray test).
Single-leaf or
double-leaf door:
active or passive leaf.
A
Single-leaf door.
B
Passive leaf of
a double door.
C
Maximum projection
of 150mm.
Maximum projection
of 100 mm.
Note: Additional requirements for
tests for a higher level of safety may
not lead to a reduction relative to the
other requirements in this standard.
A
Push rod.
B
Push bar.
11
Specifications for the
locking mechanism
for emergency exits in
accordance with the
EN 12209 standard.
• Operation tested between -20°C and +80°C.
•Category of use:
- Grade 1: average frequency of use, very careful
users => private use.
- Grade 2: high frequency of use, careful users =>
interior doors in offices.
- Grade 3: very high frequency of use, high
probability of abuse => offices in public
buildings.
•Durability: in accordance with the cycles and
load on the day latch.
•Fire resistance:
- Grade 0: not CF-approved.
- Grade 1: CF-approved.
• Safety.
• Corrosion resistance.
• Security.
Door weight and closing
force
This European standard specifies the requirements
and test methods for durability, resistance, security,
operation of the mechanical locks and their locking
plates in accordance with the usage profile for the
door. The correct grade must be chosen in line with
the usage profile.
Durability and load on
the day latch
Use
Category of use
EN 12209 Locks and latches - Mechanically
operated locks, latches and locking plates Requirements and test methods.
1
2
3
A
50,000 cycles,
no load.
1
Up to 100 kg,
50 N maximum.
B
100,000 cycles,
no load.
2
Up to 200 kg,
50 N maximum.
C
200,000 cycles,
no load.
3
More than 200 kg
or as indicated,
50 N maximum.
F
50,000 cycles,
10 N load.
4
Up to 100 kg,
25 N maximum.
G
100,000 cycles,
10 N load.
5
Up to 200 kg,
25 N maximum.
More than 200 kg
or as indicated,
25 N maximum.
Classification
The EN 12209 standard uses an 11 digit code to
classify the mechanical locks.
H
200,000 cycles,
10 N load.
6
Nemef products
that comply with the
EN 12209 standard
Mechanical locks with a panic function and
automatic locking.
L
100,000 cycles,
25 N load.
7
Up to 100 kg,
15 N maximum.
M
200,000 cycles,
25 N load.
8
Up to 200 kg,
15 N maximum.
R
100,000 cycles,
50 N load.
9
More than 200 kg
or as indicated,
15 N maximum.
S
200,000 cycles,
50 N load.
W
100,000 cycles,
120 N load.
X
200,000 cycles,
120 N load.
12
1
Low risk of abuse, very
careful users
=>PRIVATE USE.
2
Risk of abuse, careful users
=>Offices.
3
High frequency of use by the
public, with a high risk of abuse
=> PUBLIC BUILDINGS.
Fire resistance
Safety
Corrosion resistance and
temperature resistance
Security: resistance
to attack using a drill
Area of application
of the door
Type of key opening:
latch mechanism
Type of square shaft
Identification of the key
Classification EN 12209: 2003/AC: 2005.
4
5
6
7
8
9
10
11
0
0
1
No requirements
Not suitable for use on fire doors
and/or smoke containment doors.
Suitable for use on fire doors and/
or smoke containment doors.
0
No requirements.
1
Minimal;
no resistance.
A
Mortise lock;
without limitation
on the application.
0
Not applicable.
A
Low resistance;
no requirements.
2
Weak;
no resistance.
B
Mortise lock;
hinged door.
A
B
Average resistance;
no requirements.
3
Average;
no resistance.
C
Mortise lock;
sliding door.
C
High resistance; no
requirements.
4
High;
no resistance.
D
D
Very high resistance;
no requirements.
5
High; with
resistance.
E
Average resistance;
between -20°C
and +80°C.
6
F
High resistance;
between -20°C
and +80°C.
7
G
Very high resistance;
between -20°C
and +80°C.
No requirements.
0
Cylinder lock;
manual.
At least 3 locking pins.
A
B
Cylinder lock;
automatic.
At least 5 locking pins.
B
Face-fit lock;
without limitation
on the application.
C
Cylinder lock; manual
with intermediary.
At least 3 locking pins
with an extensive number
of combinations.
C
E
Face-fit lock;
hinged door.
D
Lever lock; manual.
Very high;
no resistance.
F
Face-fit lock;
sliding door.
E
Lever lock;
automatic.
At least 6 locking pins.
D
Very high;
with resistance.
G
Mortise lock;
without limitation
on the application.
F
Lever lock; manual
with intermediary.
At least 6 locking pins
with an extensive number
of combinations.
E
H
Mortise lock;
hinged door;
supported.
G
Lock without
key; manual.
J
Face-fit lock; hinged
door, opening to
the exterior.
H
Lock with night
latch without key;
automatic.
At least 7 locking pins .
F
K
Mortise lock; hinged
door, latch on interior face.
At least 7 locking pins
with an extensive number
of combinations.
G
L
Mortise lock; sliding door,
latch on interior face.
At least 8 locking pins
with an extensive number
of combinations.
H
M
Face-fit lock; hinged door,
latch on interior face.
N
Face-fit lock; sliding door,
latch on interior face.
0
Lock without lock
shaft aperture.
P
Mortise lock; hinged door;
supported, latch on interior face.
1
With knob or sprung lever.
R
Face-fit lock; hinged door,
opening to the interior,
latch on interior face.
2
With unsprung lever.
3
With unsprung lever
for intensive use.
4
With sprung lever for intensive use
indicated by the manufacturer.
13
14
1730 Series.
Fire-resistant mortise locks
Specifications
• For European profile cylinder.
• Key action on latch bolt.
• Single throw dead bolt.
• Non-handed.
• Without strike plate.
Profile cylinder
9 mm follower
Steel, zinc-plated front plate 24 x 235 mm rounded
Stainless steel front plate 24 x 235 mm rounded
Steel, zinc-plated lock case
Steel, zinc-plated latch bolt
Zinc-plated roller bolt (adjustable)
Steel, zinc-plated dead bolt
Key action on latch bolt
Single throw
Panic one-piece follower
Panic two-piece follower
Zinc-plated security bolt
22 mm profile cylinder
Packed per piece
Packed per 25 pieces
•
•
•
•
•
• • • • •
•
• • •
•
• • •
• • • • •
• • • •
•
• • • • • •
• • • • • •
1739/55
Distance 72 mm
1739/51
Backset 65 mm
1739/46
•Key-infill piece with set screw Art. BB 1739 and
BB 7000 (Page 42).
•Strike plate Art. P 1739/17 stainless steel and
1739/12 zinc-plated (page 41).
• Reduction sleeve 8/9 mm Art. 1769/21 (page 42).
1739/36
Accessories
1739/29
Furniture with split spindle is required.
In unlocked position, latch bolt is operated from
both sides by lever handle/key action. In locked
position, inside lever handle retracts latchand dead bolt simultaneously. Outside lever handle
retracts latch bolt only. Dead bolt operated by
cylinder key.
1739/28
Art. 1739/46
1739/27
Furniture with fixed knob outside is required.
In unlocked position latch bolt retracts from the
outside only by key action, from the inside by lever
handle. In locked position lever handle retracts
latch- and dead bolt simultaneously from inside
(panic function). Bolts operated from outside by
cylinder key only.
1739/03
Art. 1739/36
•
•
•
•
•
•
•
•
•
•
• •
•
•
• • • • • • •
• • • • • • • •
• • • • • • • •
•
•
•
•
• • • • • • •
•
Art. 1739
Standards: CE marking, EN 12209 and
EN 179 (Panic)
Art. 1739
15
1759 Series (non fire-resistant).
Special mortise locks.
Specifications
• Non fire-resistant.
• For European profile cylinder.
• Key action on latch bolt.
• Single throw dead bolt.
• Non-handed.
• Without strike plate.
1759/08
1759/08
KABA
1759/26
1759/29
For non fire-resistant steel doors (for example
passage door in garage).
1759/06
Note
1759/02
KABA
Strike plate Art. P1759/02 steel zinc plated
(page 41).
1759/02
Accessories
•
•
•
•
•
•
•
•
•
•
•
8 mm follower
•
•
•
•
•
•
•
•
•
•
•
•
Steel, lacquered front plate 20 x 235 mm
rounded RAL 7035
•
•
Backset 65 mm
Distance 72 mm
Profile cylinder
•
•
•
Steel, zinc-plated front plate 20 x 235 mm rounded
Steel, zinc-plated front plate 20 x 325 mm rounded
Hole 6.5 countersunk 11.25 x 90˚
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Steel, zinc-plated lock case for multi-point
Steel, zinc-plated lock case
Die-cast, latch bolt
•
•
•
•
•
•
•
•
•
•
•
Latch bolt not centric in front plate
Die-cast, dead bolt
Key action on latch bolt
Single throw
22 mm profile cylinder
•
•
•
•
•
•
Handed
Packed per piece
Packed per 25 pieces
16
•
•
Art. 1759
Standards: none
•
• •
•
•
•
• •
• •
• •
• •
•
•
• •
Art. 1759
1769 Series.
Fire-resitant mortise locks.
Specifications
• For European profile cylinder.
• Key action on latch bolt.
• Double throw dead bolt.
• Handed.
• Without strike plate.
Steel, zinc-plated front plate
24 x 235 mm rounded
Stainless steel front plate
24 x 235 mm rounded
Stainless steel front plate
20 x 235 mm rounded
Steel, zinc-plated lock case
Steel, zinc-plated latch bolt
Steel, nickel-plated latch bolt
Steel, zinc-plated dead bolt
Steel, nickel-plated dead bolt
Key action on latch bolt
Double throw
•
•
•
•
• • • •
• • • •
Panic two-piece follower
Panic two-piece follower inwards
Lever free
Packed per 25 pieces
• •
1769/36
•
•
•
•
• • • •
• • •
•
• • •
•
1769/35
•
•
•
•
• • •
1769/32
•
•
•
•
Panic one-piece follower
Packed per piece
1769/26
• • • • • • • • • •
• • • • • • • • • •
• • • • • • • • • •
•
• • •
• • • •
•
• • •
• •
Latch only
Dead bolt only
1769/25
1769/77
8 mm follower
1769/57
9 mm follower
1769/56
Profile cylinder
1769/48
Distance 72 mm
1769/46
Backset 65 mm
1769/24
Furniture with split spindle is required. In unlocked
position, latch bolt is operated from both sides
by lever handle/key action. In locked position,
inside lever handle retracts latch- and dead bolt
simultaneously (panic function D). Outside lever
handle retracts latch bolt only. Dead bolt operated
by cylinder key.
1769/23
Art.1769/46
1769/08
Furniture with fixed knob outside is required.
In unlocked position latch bolt retracts from the
outside only by key action, from the inside by lever
handle. In locked position lever handle retracts
latch- and dead bolt simultaneously from inside
(panic function E). Bolts operated from outside by
cylinder key only.
1769/03
Art.1769/36
•
•
• • • • •
•
•
• •
•
• • •
•
•
•
• • •
• • • •
• •
Art. 1769
Standards: CE marking, EN 12209, EN 1125, EN
179 (panic) and DIN 18250 T 120 (part 1)
•
•
•
•
• • • • •
• •
• • •
• •
• • •
• • • • •
• • • • •
• • • • •
•
•
• • • • • • • • • • • •
Accessories: 22 mm profile cylinder hole, strike
plate Art. P 1769/66 zinc-plated
(reversible) or Art. P 1769/17 stainless steel (handed) (page 41), reduction sleeve 8/9 mm
Art. 1769/21 (page 42).
Art. 1769/03
17
18
1769 Series - Class 5*.
Fire-resistant mortise locks.
Specifications
• For fire-resistants doors.
• To take profile cylinder.
• Handed.
• Backset 65 mm - distance 72 mm.
• Key action on latch bolt.
• Plastic latch for noise reduction.
• Double throw Omega dead bolt.
• Front plate available in 20/24 mm in
aluminium finish or stainless steel.
• Available with plastic dead bolt cap on request.
• Without strike plate.
Front plate 20 x 235 mm rounded
Front plate 24 x 235 mm rounded
9 mm follower
Aluminium finish or stainless steel
Packed per 25 or 750 pieces
1769/02
1769/01
Art. 1769/01 and 1769/02
Standards: CE marking, EN 12209 and DIN
18250 T 120 (part 1)
•
•
• •
• •
• •
Art. 1769
* Class 5 according to DIN 18250 attachment 2.
19
1769/88 Self-closing Panic locks.
Fire-resistant.
Specifications
• To take profile cylinder.
• Handed.
• Backset 65 mm - distance 72 mm.
• Key action on latch bolt.
• With auxiliary latch.
• 9 mm bolt through follower.
• Is fire-resistant and MPA registered.
• Without strike plate.
Attention
Do not use these locks in combination with
knob cylinder, electrical door opener nor lever/
lever handle.
Accessories
None.
1769/88
Art. 1769/88
Standards: EN 179 and DIN 18250 T 120 (part 1),
MPA registered
Backset 65 mm
Stainless steel front plate 20 x 235 mm rounded
Stainless steel front plate 24 x 235 mm rounded
Packed per piece
20
•
•
•
•
Art. 1769/88
699 Self-closing Panic locks.
Non fire-resistant.
Specifications
• To take profile cylinder.
• Handed.
• Backset 55 und 60 mm - distance 72 mm.
• Key action on latch bolt.
• With auxiliary latch.
• 8 mm bolt through follower.
• Including strike plate.
Attention
Do not use these locks in combination with
knob cylinder, electrical door opener nor lever/
lever handle.
Accessories
None.
Backset 55 mm
Backset 60 mm
Stainless steel front plate 20 x 235 mm rounded
Stainless steel front plate 24 x 235 mm rounded
Packed per piece
•
•
• •
•
699/35
699/34
699/31
699/30
Art. 699
Standards: EN 179
•
• •
• • • •
Art. 699
21
1729 and 1723 Series.
Fire-resistant mortise multi-point locks.
22
Main lock Art. 1729/21
Standards: none
Upper lock Art. 1723/21
Standards: none
Rod Art. 1729
Standards: none
Lower lock Art. 1723/21
Standards: none
1729 and 1723 Series.
Fire-resistant mortise multi-point locks.
Specifications
• Non-handed.
• For European profile cylinder.
• Key action on latch bolt.
• Single throw dead bolt.
• With rod movement up- and downwards.
• Without strike plate.
Latches
Art. 1723/21
• Handed.
• With rod connection.
Rods
Art. 1729
Length 648 or 958 mm.
In unlocked position
Latch bolts are operated from both sides by lever
handle or key action on latch bolt.
In locked position
Dead bolt is locked. Latch bolts are operated from
both sides by lever handle.
Accessories
None.
Backset 65 mm
Distance 72 mm
Profile cylinder
9 mm follower
Steel, zinc-plated front plate 24 x 288 mm rounded
Steel, zinc-plated front plate 24 x 197 mm rounded
Zinc-plated lock case
Zinc-plated latch bolt
Zinc-plated dead bolt
Key action on latch bolt
Packed per 25 pieces
1723/21
1729/21
THROW
THROW
Main lock
Art. 1729/21
•
•
•
•
•
•
• •
• •
•
•
• •
Art. 1729/21 and 1723/21 (2x)
23
1749 and 1742 Series.
Fire-resistant mortise multi-point locks.
24
Main lock Art. 1749
Standards: CE marking and DIN 18250 T120
(Part 1)
Upper lock Art. 1742/09
Standards: CE marking and DIN 18250 T120
(Part 1)
Rod Art. 1742
Lower lock Art. 1742/09
Standards: CE marking and DIN 18250 T120
(Part 1)
1749 and 1742 Series.
Fire-resistant mortise multi-point locks.
Length 629, 689, 754 or 879 mm.
In unlocked position
Latch bolt is operated from both sides by lever
handle/key action.
In locked position
Dead bolt and pivot dead bolts are locked. Latch
bolt and lever handle are blocked.
Note
Please use Art. 1742 only in accordance with
Art. 1749/09, 1749/37 and 1749/47.
Accessories
None.
Backset 65 mm
Distance 72 mm
Profile cylinder
9 mm follower
Steel, zinc-plated front plate 24 x 235 mm rounded
Steel, zinc-plated lock case
Steel, zinc-plated latch bolt
Steel, zinc-plated dead bolt
Key action on latch bolt
Panic one-piece follower E
Panic two-piece follower D
Suitable for fixed rods
Packed per 25 pieces
Packed per 50 pieces
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
•
• •
•
THROW
Rods
Art. 1742
1742/09
• Non-handed.
• With adjustable rod application.
1749/47
Pivot dead bolts
Art. 1742/09
1749/37
• Handed.
• For European profile cylinder.
• Key action on latch bolt.
• Double throw dead bolt.
• With rod movement up- and downwards.
• Without strike plate.
1749/09
Main lock
Art. 1749
THROW
Specifications
•
• • • •
• • •
•
Art. 1749 und 1742/09 (2x)
25
1901 and 1905 Series.
Fire-resistant panic mortise
locks for active leaf.
Specifications
• For European profile cylinder.
• Key action on latch bolt.
• Two-piece follower.
• Without strike plate.
Art. 1901
• Panic lock for active leaf.
• Non-handed.
Art. 1905/21
• Narrow style panic lock for active leaf.
• Handed.
Art. 1929/21
• Multi-point panic lock for active leaf.
• Handed.
In unlocked position
Latch bolt is operated from both sides by lever
handle/key action.
In locked position
No operation of latch bolt from outside. Operation
latch bolt from inside handle.
Art. 1901/17 is the same lock, however the forend
is stainless steel.
Backset 65 mm
Backset 40 mm
Distance 72 mm
Profile cylinder
9 mm follower
Steel, zinc-plated front plate 24 x 235 mm rounded
Steel, zinc-plated front plate 24 x 350 mm rounded
Stainless steel front plate 24 x 235 mm rounded
Steel, zinc-plated front plate 24 x 288 mm rounded
Steel, zinc-plated lock case for multi-point lock
Steel, zinc-plated lock case
Die-cast, zinc-plated latch bolt
Key-action on latch bolt
Non-handed
Handed
Packed per 25 pieces
26
1929/21
See pages 28, 29, 32 and 33.
1905/21
Accessories
Art. 1901
Standards Art. 1901: CE marking, EN 1125 and
EN 12209 Standards Art. 1905 and 1929: none
1901/21
Art. 1901 certified according to EN 1125.
1901/17
Note
• •
•
•
• • • •
• • • •
• • • •
•
•
•
•
•
• • • •
• • • •
• • •
• •
• •
• • • •
Art. 1901/21
1920, 1921 and 1925 Series.
Fire-resistant panic mortise
locks for passive leaf.
Art. 1920/21
• Panic lock for passive leaf.
• Handed.
Art. 1921
• Art. 1921/17 and /21 panic lock for passive leaf.
• Non-handed.
Art. 1925
• Art. 1925/21 narrow style panic lock for
passive leaf.
• Handed.
Function
By operating the inside lever handle the upper and
lower rods are retracted and the latch bolt in the
active lock (Art. 1901/21 and 1905/21) pushed
back, which opens both doors.
In unlocked position
The rods are held in unlocked position by the
automatic relatching device. When closing the
passive door, the rods are brought back in locked
position automatically.
In locked position
Upper and lower rod can not be operated
simultaneously.
Do not use lever handle from outside on Art. 1920,
1921 and Art. 1925.
Backset 65 mm
Backset 40 mm
Backset 95 mm
9 mm follower
Steel, zinc-plated front plate 24 x 235 mm rounded
Steel, zinc-plated front plate 24 x 350 mm rounded
Stainless steel front plate 24 x 235 mm rounded
Steel, zinc-plated lock case
Non-handed
Handed
Packed per piece
Packed per 25 pieces
1925/21
1921/21
1921/17
See pages 28, 29, 32 and 33.
1920/21
Accessories
Art. 1921
Standards Art. 1921: EN 1125
Standards Art. 1920 and 1925: none
• •
•
•
• • • •
•
•
•
•
• • • •
• •
•
•
•
• • • •
Art. 1921/21
27
3600 Series.
Panic bar ‘Smart’.
Horizontal panic bar
The horizontal panic bar ‘Smart‘ is according to
EN 1125 in combination with Art. 1901 and 1921
certified. It can be used with all panic locks of
the Nemef 1700, 1900 and 9670/08 Series.
The main feature of the panic bar is that the door
can be opened in every situation by hand or by
leaning against the door. Furthermore the bar is
tested for operation on fire resistant doors with
panic locks.
Advantages
Technical specification
Spindles
• Suitable for mortise locks: attractive design.
• Non-handed: reducing stock.
• Flexible program: complete range of accessories.
• Easy to apply: minimal fixing time.
•High quality in accordance with European
standard.
• Over 200.000 hittings for test in accordance with
EN 1125:2008.
• Opening power on non-loaded door: ≤80N.
• Opening power on a 1000N loaded door: ≤220N.
• Finger protection.
• Bar projection 100 mm.
•Neutral salt spraytest Grade 3: high resistance
(96 hours EN 1670:1998).
Mechanism Art. 3640/1
Standards: Art. 3640/1 and 3640/17:
CE marking, EN 1125 classification 37611322A
i.c.w. Art. 1901 and 1921
ADJUSTABLE
•Art. 3621 9 mm square spindle, 125 mm.
•Art. 3622 9 mm splitted square spindle,
55/55 mm, 65/65 mm.
•Art. 3623 9 mm splitted square spindle,
38/55 mm.
•Art. 3624 Splitted spindle 8/9 mm, 42/45 mm.
•Art. 3625 Splitted spindle 9/8 mm, 77 mm.
ADJUSTABLE
Aluminium bar
• Art. 3630/4 Aluminium rod.
• Length: 900 or 1200 mm.
Mechanism
Art. 3640/1. Black painted steel mechanical housing
with plastic cover. With steel core into the handle
and plate.
Application
• Door width: 350 - 1300 mm.
• Door thickness: 40 - 65 mm.
• Distance: 72 mm or 92 mm.
92 mm is suitable for Narrow style
panic lock 9670/08 Serie (see page 31).
• Width: 34,5 mm.
• With or without profile cylinder holes.
Art. 3640/1 and 3640/17
Aluminium rod Art. 3630/4
28
3600 Series.
Panic bar ‘Smart’.
Stainless steel
bar ‘Smart’
• Art. 3630/17, Stainless steel rod.
• Length: 900 or 1200 mm.
Mechanism
Art. 3640/17. Stainless steel mechanical housing.
With steel core into the handle and plate.
Application
• Door width: 350 - 1300 mm.
• Door thickness: 40 - 65 mm.
• Distance: 72 mm or 92 mm.
92 mm is suitable for Narrow style
panic lock 9670/08 Serie (see page 31).
• Width: 34,5 mm.
• With or without profile cylinder holes.
Rim-type
Mechanism Art. 3640/17
(see Standards 3640/1)
Stainless steel rod Art. 3630/17
Bar
• Art. 3630/4, Aluminium rod.
• Length: 900 or 1200 mm.
Mechanism
• Art. 3645/1, black painted connecting rods.
• Art. 3650/1, black painted mechanical housing
with plastic cover. With steel core into the
handle and plate.
Application
• Door width: 350 - 1300 mm.
• Non-handed.
• Can only be used for double leaf doors in
combination with the Smart version.
Mechanism Art. 3650/1
Standards: none
Connecting rods Art. 3645
29
9600 Series.
Fire-resistant narrow-style lock.
Specifications
• To take profile cylinder.
• Key action on latch bolt.
• Backset 30, 35 and 40 mm.
• Distance 92 mm.
• Single throw dead bolt.
• Latch reversible.
• Follower 9 mm MPA registered.
• Without strike plate.
Accessories
Strike plate P9600/17 stainless steel (page 41).
9600/08
Art. 9600/08 fire-resistant
Standards: EN 12209
Backset 30, 35 and 40 mm
Distance 92 mm
To take profile cylinder
Stainless steel front plate 24 x 245 mm square
Steel, zinc-plated lock case
Key action on latch bolt
Single throw
9 mm follower MPA registered
Packed per piece
30
•
•
•
•
•
•
•
•
•
Art. 9600/08
9670 Series.
Fire-resistant narrow-style panic lock.
Specifications
• To take profile cylinder.
• Key action on latch bolt.
• Backset 30, 35, 40 and 45 mm.
• Distance 92 mm.
• Single throw dead bolt.
• One-piece follower, latch reversible.
• Two-piece follower, handed.
• Follower 8 or 9 mm.
• Follower 9 mm MPA registered.
• Without strike plate.
Accessories
Strike plate P9600/17 stainless steel (page 41).
9670/08
Art. 9670
Standards: CE marking and EN 179
Backset 30, 35, 40 and 45 mm
Distance 92 mm
To take profile cylinder
Stainless steel front plate 24 x 245 mm square
Steel, zinc-plated lock case
Key action on latch bolt
Single throw
Panic one-piece follower, E
Panic two-piece follower, D
Packed per piece
•
•
•
•
•
•
•
•
•
•
Art. 9670
31
Accessories
1900 and 3600 Series.
Art. 1935
Automatic
relatching device
Art. 1936
Rod hasp bottom
Art. 1937
Rod hasp top
Art. 1938
Strike plate for
Art. 1901
Art. 1939
Floor strike cup
32
Accessories
1900 and 3600 Series.
Art. 1932
Zinc-plated rods with
two closing bolts
Length: 1200 mm
Art. 1995
Flush bolt to be used
for passive door and to
combine with Art. 1932
Example use of
Art. 1932 and 1935
33
2914 Series.
Fire-resistant door handle.
Art. 2914
• Back plate: Steel.
• Cover plate: Plastic, black or aluminium look.
• Handle: Plastic, black or aluminium look,
fixed to plate.
• Square spindle: 9 mm.
• Door width: 40 - 63 mm.
• Art. 2914/02: Lever/lever blind mat black.
• Art. 2914/12: Lever/lever blind aluminium look.
Art. 2914/02
Standards: DIN 18273
Art. 2914
34
2916 Series.
Fire-resistant door handle.
Art. 2916
• Back plate: Steel.
• Cover plate: Plastic, black, grey, white,
aluminium look or stainless steel.
• Handle: Plastic, black, grey, white, aluminium
look and stainless steel, fixed to plate.
• Square spindle: 9 mm.
• Door width: 40 - 63 mm.
• Distance: 72 mm.
• Art. 2916/02: Lever/lever black.
• Art. 2916/05: Lever/lever grey.
• Art. 2916/07: Lever/lever white.
• Art. 2916/12: Lever/lever aluminium look.
• Art. 2916/13: Lever/lever stainless steel.
Also available in non fire-rated execution (without
steel plate), Art. 2959/02 (page 38).
Art. 2916/02
Standards: DIN 18273
Art. 2916
35
2919 Series lever/knob panic handle.
Fire-resistant door handle.
Knob-lever doorhandle
Art. 2919
• Back plate: Steel.
• Cover plate: Plastic, black, grey, aluminium look
or stainless steel.
• Handle: Plastic, fixed to plate, grey, aluminium
look and stainless steel.
• Square spindle: 9 mm.
• Door width: 40 - 63 mm.
• Distance: 72 mm.
• Art. 2919/02: Lever/knob black.
• Art. 2919/05: Lever/knob grey.
• Art. 2919/12: Lever/knob aluminium look.
• Art. 2919/13: Lever/knob stainless steel.
Art. 2919/02
Standards: DIN 18273 and EN 179
Art. 2919
36
2924 Series lever/lever panic handle.
Fire-resistant door handle.
Lever handle
panic furniture
Art. 2924
• Back plate: Steel.
• Cover plate: Plastic, black.
• Handle: Plastic, black, fixed to plate.
• Square spindle: 9 mm splitted.
• Door width: 40 - 63 mm.
• Distance: 72 mm.
• Art. 2924/02: Lever/lever black.
Art. 2924/02
Standards: DIN 18273 and EN 179
Art. 2924
37
2959 Series.
Non fire-resistant door handle.
Art. 2959/02
(non fire-resistant)
• Plate: Black plastic.
• Handle: Black plastic.
• Square spindle: 8 mm.
• Door width: 40 - 63 mm.
• Distance: 72 mm.
• Art. 2959/02: Lever/lever black.
Art. 2959/02
Standards: none
Art. 2959/02
38
1012 Series.
Fire-resistant door hinges.
Art. 1012/02
Fire-resistant door hinges. Zinc-plated finish.
Set consisting of:
• One spring hinge.
• One non-spring hinge.
• Fixing pin.
• Fixing screw.
Art. 1012/02
Standards: EN 1935
Art. 1012/02
39
Fire resistant plates.
Art. 2930/02 black 72 mm
Standards: none
Art. 2934/02 black
Standards: none
40
Art. 2931/02 black 72 mm
Standards: none
Art. 2935/02 black
Standards: none
Art. 2932/02 black
Standards: none
Art. 2936/02 black
Standards: none
Art. 2933/02 black
Standards: none
Strike plates*.
Strike plates 1730 series
For the 1730 and 1901 series the following
strike plates can be used:
Strike plate 1759 Series
For the 1759 series the following strike
plate can be used:
Art. P 1739/12, steel zinc-plated, non-handed
Art. P 1739/17, stainless steel, non-handed
Art. P 1759/02, steel zinc-plated, non-handed
Strike plates 1760 Series
For the 1760 and 1740 series the following
strike plates can be used:
Strike plate 9600 Series
For the 9600 Series
Art. P 1769/66,
steel zinc-plated,
non-handed
Art. P 1769/17,
stainless steel,
handed
Art. P 9600/17 Stainless steel,
non-handed
* Standards: for strike plates are no standards.
41
Accessories.
Art. BB7000
BB infill piece with 1 key
Art. 1769/21
Reducing sleeve 8/9 mm
42
Art. BB1739
BB infill piece with 1 key
Certificates*
ISO 9001, EN 179 and EN 1125.
If you require more information about the certificates or the combination of different locks with panic
exit devices, please contact us.
MATERIALPRÜFUNGSAMT NORDRHEIN-WESTFALEN
EG–KONFORMITÄTSZERTIFIKAT
0432 – CPD – 0038
Gemäß der Richtlinie des Rates der Europäischen Gemeinschaften vom 21. Dezember 1988 zur Angleichung
der Rechts– und Verwaltungsvorschriften der Mitgliedstaaten über Bauprodukte (Bauproduktenrichtlinie –
CPD), geändert durch die Richtlinie 93/68/EWG des Rates der Europäischen Gemeinschaften vom 22. Juli
1993, wird hiermit bestätigt, dass das Bauprodukt
Notausgangsverschlüsse NEMEF
Notausgangstürverschlüsse mit Drücker für 1flügelige Türen
gemäß der Zusammenstellung und Klassifikation in der Anlage 2,
in Verkehr gebracht durch
NEMEF BV
Papegaaiweg 35
NL-7345 DK Wenum Wiesel
und hergestellt in den Herstellwerken
gemäß Anlage 1
durch den Hersteller einer werkseigenen Produktionskontrolle sowie zusätzlichen Prüfungen von im Werk
entnommenen Proben nach festgelegtem Prüfplan unterzogen werden und dass die notifizierte Stelle Nr.
- 0432 - MPA NRW – eine Erstprüfung der relevanten Eigenschaften des Produkts, eine Erstinspektion des
Werkes und der werkseigenen Produktionskontrolle durchgeführt hat und eine laufende Überwachung,
Beurteilung und Anerkennung der werkseigenen Produktionskontrolle durchführt.
Dieses Zertifikat bestätigt, dass alle Vorschriften über die Bescheinigung der Konformität und die
Leistungseigenschaften, beschrieben im Anhang ZA der Norm
DIN EN 179: 2008-04
(EN 179: 2008 (D))
angewendet wurden und dass das Produkt alle darin vorgeschriebenen Anforderungen erfüllt.
Dieses Zertifikat wurde erstmals am 15.04.2011 ausgestellt und gilt solange, wie die Festlegungen in der
angeführten harmonisierten technischen Spezifikation oder die Herstellbedingungen im Werk oder die
werkseigene Produktionskontrolle selbst nicht wesentlich verändert werden.
Dortmund, 15.04.2011
Dip.-Ing. H. Jansen
stellv.Leiter der Zertifizierungsstelle
D I E SE S Z ER T I F I K AT U M F A SS T 1 S E IT E U N D 3 AN L AG EN .
Marsbruchstraße 186 y 44287 Dortmund-Aplerbeck y Telefon (0231) 4502-480 y Telefax (0231) 4502 586 y Internet www.mpanrw.de
* Certificates can be downloaded from our website www.nemef.com.
43
ASSA ABLOY is the global
leader in door opening solutions,
dedicated to satisfying
end-user needs for security,
safety and convenience.
9999990351 / JTP - 06/2012
ASSA ABLOY Nederland B.V.
Business Unit Nemef
P.O. Box 13
7300 AA Apeldoorn
The Netherlands
Tel. +31 55 3128400
Fax +31 55 3128406
export@nemef.nl
www.nemef.com