KB100, KB101, KB102, and KB108
END CAP REPLACEMENT INSTRUCTIONS
End Cap
P/N 387-KIT, 689-KIT, 692-KIT, 850-KIT
Tools Required:
Flat Head Screwdriver
1. If you still have one or both end caps in place, remove them by sliding a thin
flat head screwdriver (or similar tool) between the head of the end cap and the
side of the unit. Discard the old end caps.
2. Take one of the new end caps and insert it to the cylindrical recessed area
located on one side of the unit. Push it in with hand pressure until it is snug.
3. Repeat step 2 for the other side
of the unit.
®
Koala Kare Products ǁ 6982 S Quentin St. ǁ Centennial, CO 80112
Toll Free: 888.733.3456 ǁ 303.539.8300 ǁ Fax: 303.539.8399
www.koalabear.com
P/N 1013 May 2011