REVISION B
Pb THIS PRODUCT MANUFACTURED
WITH LEAD-FREE PROCESSING
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
SMA-P-C-XX-ST-CA1S
DO NOT
SCALE FROM
THIS PRINT
TERMINATION
-CA1S: CCA-316-S
(RG-316 CABLE, DOUBLE SHIELD)
GENDER
-P: PLUG
ORIENTATION
-ST: STRAIGHT
TYPE
-C: CABLE
PLATING SPECIFICATION
-HF: 30µ" GOLD CENTER CONTACT,
3µ" GOLD OUTER CONTACT
(SEE TABLE 1)
3
1
2
1.27 .050
REF
3.90 .154
REF
3.40 .134
REF
9.50 .374 REF
8.00 .315 HEX
REF
2.70 .106 REF
7.30 .287
REF
9.45 .372 REF
15.45 .608 REF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
DECIMALS
ANGLES
X.X: 0.3 [.01]
5
X.XX: 0.13 [.005]
X.XXX: 0.051 [.0020]
NOTES:
MATERIAL:
1. C REPRESENTS A CRITICAL DIMENSION.
2. PRODUCT TO BE PACKAGED PER PACKING STANDARD CO-RF-WI-3040-M.
3. FERRULE AND PIN TO BE PACKAGED SEPARATELY.
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
CABLE BODY, NUT, FERRULES, PIN: BRASS
INSULATOR: PFTE
GASKET: SILICONE
RING: STAINLESS STEEL
F:\DWG\MISC\MKTG\SMA-P-C-XX-ST-CA1S-MKT.SLDDRW
SHEET SCALE: 3:1
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
SMA ST PLUG, RG 316 CABLE, DOUBLE SHIELD, - 50 OHM
DWG. NO.
SMA-P-C-XX-ST-CA1S
BY: EMMA CHEN 3/20/2013
SHEET 1 OF 2
REVISION B
2.6 .10
CCA-316-S (RG 316 CABLE, DOUBLE SHIELD)
C
IN-PROCESS 1
4.57±0.30 .180±.012
STRIP AND TIN INNER CONDUCTOR
C
C
1
10.1 .40
HST-0.125-02-BLK
IN-PROCESS 2
ADD HEAT SHRINK TUBE AND FERRULE
20.0±2.5 .787±.098
2
0.10 .004 MAX. GAP ALLOWABLE C
IN-PROCESS 3
SOLDER SIGNAL PIN
2.70 .106 MIN. FLARED ID
IN-PROCESS 4
FLARE SHIELD
0.92 .036 REF
REFERENCE PLANE
2.30 .091 REF TO CENTER CONTACT
IN-PROCESS 5
ADD SUB ASSEMBLY
'A'
0.05 .002 REF
(TO INSULATOR)
REFERENCE PLANE
DETAIL 'A'
SCALE 8 : 1
3
0.25 .010 MAX. GAP ALLOWABLE C
IN-PROCESS 6
3.25 .128 (HEX CRIMP) C
(ACROSS 2 FACES)
CRIMP FERRULE
(USE RF CRIMP HAND TOOL # CAT-HT-126667-21 OR EQUIVALENT)
(USE .128 [ HEX DIE)
F:\DWG\MISC\MKTG\SMA-P-C-XX-ST-CA1S-MKT.SLDDRW
0.6[.03] MAX.GAP ALLOWABLE
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
IN-PROCESS 7
APPLY HEAT SHRINK TUBING
SHEET SCALE: 1.5:1
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
SMA ST PLUG, RG 316 CABLE, DOUBLE SHIELD, - 50 OHM
DWG. NO.
SMA-P-C-XX-ST-CA1S
BY: EMMA CHEN 3/20/2013
SHEET 2 OF 2