DETENTION
ACCESSORIES
Engineered to last
– 20 years to life.
Designed with Durability in Mind
PDI’s standard and custom specification detention accessories are the most the
cost-effective
solution for new construction or retrofits, and contribute to safer correctional environments.
Fabricated with hard wearing steel or stainless steel for long-lasting value, PDI accessories are
virtually indestructible. Resistance to scratching, dents, and markup withstand
years of use
and abuse. Polished surfaces are easier to clean and disinfect , helping reduce the spread
of germs. Multi gauge steel mounting plates provide secure installation in any environment.
Table of Contents
Key Cabinet................................................................................................................................................................................................................................2
Long Gun Locker....................................................................................................................................................................................................................3
Pistol Locker - Standard......................................................................................................................................................................................................4
Pistol Locker - Tilt....................................................................................................................................................................................................................5
Package Pass..............................................................................................................................................................................................................................6
Food Pass.....................................................................................................................................................................................................................................7
Safety Shelves with Hooks................................................................................................................................................................................................8
Ball & Pin Safety Hook..........................................................................................................................................................................................................9
Safety Hook.............................................................................................................................................................................................................................10
Speaker Port............................................................................................................................................................................................................................11
One Piece Mirrors ...............................................................................................................................................................................................................12
Two Piece Mirrors ...............................................................................................................................................................................................................13
Soap dish..................................................................................................................................................................................................................................14
Toilet Paper Holder.............................................................................................................................................................................................................15
Grab Bars...................................................................................................................................................................................................................................16
Safe Bar.......................................................................................................................................................................................................................................17
KEY CABINET
KC1000
Door hung on continuous steel piano hinge and flanged 1” all around for
additional strength. Equipped with interior swinging 10 gauge steel leaf panels
for maximum key storage. Coated with factory primer for finish painting.
SPECIFICATIONS
Dimensions
Shell: 10 gauge steel
Door: 10 gauge steel plate
Key racks: 14 gauge bent steel plates
24” H x 18 5/8” W
CAPACITY
180 Key Capacity
60 Paracentric Keys
120 Mogul Keys 300 Key Capacity
60 Paracentric Keys
120 Mogul Keys
120 Builders Keys
405 Key Capacity
120 Paracentric Keys
180 Mogul Keys
105 Builders Keys
INSTALLATION
Mounting holes provided for installation with 3/8” anchors. Anchors not provided by PDI.
OPTIONS
Custom key capacity per project requirements.
Powder coat finish.
Page | 2
KC1000
Material LONG GUN LOCKER
LG1000
Secure long gun locker with 3, 4, 6 or 8 compartments for
rifles or shotguns. Doors on 11/2” open x .060” continuous
piano hinge with .125 pin, and ABLOY cam locks
SPECIFICATIONS
Material Dimensions
Shell: 10 gauge steel
Doors: 10 gauge plate
Vary by specification
INSTALLATION
OPTIONS
Custom capacity and size based on project requirements.
Factory red oxide primer finish.
Stainless steel with polished finish.
Powder coat finish.
Custom compartments.
714.288.1770 | sales@pdidet.com | pdidet.com
LG1000
1/2” diameter anchor holes provided in back of unit for wall mounting.
Anchors not by PDI.
Page | 3
PISTOL LOCKER - STANDARD
PL1000
Secure pistol locker equipped with cam locks. Doors are hung on
continuous steel piano hinges and include and
internal door stop mechanism.
Two keys supplied per compartment and two master keys
supplied per unit. Coated with factory primer.
Angle frame can be shipped loose for semi-recessed
installation and field welded in place.
Shell: 10 gauge steel
Doors: 10 gauge plate
7/16” diameter holes for mounting.
Locker dimensions vary
21/2” x 21/2” x 10 gauge angle frame
INSTALLATION
Mounting plates provided with 7/16“ diameter holes
for 3/8” anchors. Anchors not by PDI.
OPTIONS
Custom capacity and size based on project requirements.
Locker compartment tags.
Stainless steel.
Galvanized steel.
Powder coat finish.
Page | 4
PL1000
SPECIFICATIONS
Material Mounting
Dimensions
PISTOL LOCKER - TILT
PL2000
Secure pistol locker with tilt out compartments equipped with
Master snap locks. Compartments are hung on continuous
steel piano hinges and include internal stop bars.
Two keys supplied per compartment and two master keys
supplied per unit. Coated with factory primer finish.
Angle frame can be shipped loose for semi-recessed
installation and field welded in place.
Shell: 10 gauge steel angle frame
Doors: 10 gauge plate
7/16” diameter holes for mounting
Locker dimensions vary
21/2” x 21/2” x 10 gauge angle frame
PL2000
SPECIFICATIONS
Material Mounting
Dimensions
INSTALLATION
Mounting plates provided with 7/16“ diameter holes
for 3/8” anchors. Anchors not by PDI.
OPTIONS
Custom capacity and size based on project requirements.
Locker compartment tags.
Stainless steel.
Galvanized steel.
Powder coat finish.
714.288.1770 | sales@pdidet.com | pdidet.com
Page | 5
PACKAGE PASS
PP1000
Package Pass doors are connected with a control mechanism allowing only
one door to be open at a time. Secure side door equipped with a Master
snap lock and door pull. Coated with factory primer for finish painting.
Dimensions
11 gauge doors
10 gauge body
7 gauge plate door
Maximum package size 19” W x 13” H
INSTALLATION
Door is equipped with two 7 gauge angle collars for installation.
OPTIONS
Powder coat.
Stainless steel door.
Page | 6
PP1000
SPECIFICATIONS
Material FOOD PASS
FP1000
Food Pass door is on a continuous piano hinge. Adjoining slip
collars create a secure pass through. Food pass face prepped for a
detention snap lock. Coated with factory primer for finish painting.
SPECIFICATIONS
Material Dimensions
12 gauge assembly and handle
7 gauge plate door
12 3/8” H x 19 5/16” overall
4 1/2” H x 15” W pass thru opening
OPTIONS
FP1000
INSTALLATION
Create cut out for food pass and either field weld or thru-bolt.
Powder coat.
All stainless steel.
Galvanized material.
714.288.1770 | sales@pdidet.com | pdidet.com
Page | 7
SAFETY SHELVES WITH HOOKS
SF1000/SF2000
SPECIFICATIONS
Dimensions
7 gauge thick hook bolted to 10 gauge bracket with
non-removable security screw and tension washer
8” D x 6” H x 18” W
5” x11 /2” x 10 gauge (shelf )
INSTALLATION
SF1000
Material Wall mounted with 5/16” diameter mounting holes
and 1/4” anchors. Anchors not by PDI.
Powder coat finish.
All stainless steel.
All galvanized material.
Page | 8
SF2000
OPTIONS
BALL & PIN SAFETY HOOK
SH2000
SPECIFICATIONS
Material Dimensions
14 gauge stainless steel
16 gauge stainless steel back strap
4” H x 4” W x 1” D
SH2000
Stainless steel body and round ball hook with steel
back strap and nylon bushing. Up to 4 hooks.
INSTALLATION
Punched and countersunk for wall mounting
with 1/4” anchors.. Anchors not by PDI.
OPTIONS
Single, 2, or 4 hook strip.
Powder coat finish.
714.288.1770 | sales@pdidet.com | pdidet.com
Page | 9
SAFETY HOOK
SH1000
Hook bolted to bracket with non-removable security screw and tension washers.
INSTALLATION
5/16” diameter holes for wall mounting with 1/4” anchors. Anchors not by PDI.
OPTIONS
Powder coat finish.
All stainless steel.
All galvanized material.
Page | 10
SH1000
SPECIFICATIONS
Material 10 gauge mounting plate and bracket
7 gauge hook
Dimensions 5” H x 11/2” W
SPEAKER PORT
SP1000
Stainless steel face plate with perforated pattern, connected with a pass-proof
segment. Polished to a #4 finish. Ships with security screws for assembly.
SPECIFICATIONS
Material Dimensions Stainless steel
61/2” diameter x 1/8”
INSTALLATION
Install face plates from opposing sides of glass. Fasten both
face plates together with provided security screws.
SP1000
714.288.1770 | sales@pdidet.com | pdidet.com
Page | 11
ONE PIECE MIRRORS
MR1000/MR1001
One piece mirrors are stamped stainless steel with a polished mirror finish.
SPECIFICATIONS
LARGE ONE-PIECE MIRROR
Frame Mirror
Dimensions
16 gauge steel
20 gauge stainless steel
Frame: 91/2” W x 111/4” H x 5/16” D
Mirror: 10” W x 14” H
SMALL ONE-PIECE MIRROR
14 gauge steel
20 gauge stainless steel
Frame: 10” W x 111/2” H x 1/4” D
Mirror: 8” W x 93/4” H
MR1000
Frame Mirror
Dimensions
Eight 5/16” diameter countersunk holes provided for installation
with 1/4” flat head anchors. Anchors not by PDI.
Mirror can be installed onto optional mounting plate or embed plate which
ships with eight 1/4-20 stainless steel FH security screws for installation.
OPTIONS
Mounting plate.
Embed plate.
Page | 12
MR1001
INSTALLATION
TWO PIECE MIRRORS
MR2000/MR2001
Two Piece Mirrors are composed of a stamped chrome plated and polished frame with
mirror insert. Mirror is steel sheet polished to a mirror finish approximating that of glass.
SPECIFICATIONS
LARGE 2-PIECE MIRROR
Frame Mirror
Dimensions
16 gauge steel
20 gauge stainless steel
Frame: 121/2” W x 181/2” H x 5/16” D
Mirror: 10” W x 14” H
SMALL 2-PIECE MIRROR
14 gauge steel
Frame: 10” W x 111/2” H x 5/16” D
Mirror: 8” W x 91/2” H
MR2000
Frame Dimensions
Eight 5/16” diameter countersunk holes provided for installation
with 1/4” flat head anchors. Anchors not by PDI.
Mirror can be installed onto optional mounting plate or embed plate which
ships with Eight 1/4-20 stainless steel FH security screws for installation.
MR2001
INSTALLATION
OPTIONS
Mounting plate.
Embed plate.
714.288.1770 | sales@pdidet.com | pdidet.com
Page | 13
SOAP DISH
SD1000
SPECIFICATIONS
Material Dimensions
14 gauge stainless steel with exposed surfaces in satin finish
Mounting Plates: 11 gauge stainless steel
71/2” W x 55/8” H x 23/4” D
INSTALLATION
Provide 6” W x 4” H x 3” D wall opening for installation.
OPTIONS
Chase mounted with rear threaded studs and flat bar back plate.
Face mounted with 5/16” diameter holes for 1/4” button-head anchors.
SD1000
Page | 14
TOILET PAPER HOLDER
TP1000
SPECIFICATIONS
Material Dimensions
14 gauge stainless steel one-piece drawn, seamless
construction with exposed surfaces in satin finish
7” W x 7” H x 49/32” D
INSTALLATION
Provide 53/4” diameter x 41/4” D wall opening for installation.
Unit can be chase mounted or face mounted.
TP1000
OPTIONS
Chase mounted with rear threaded studs and flat bar back plate.
Face mounted with 5/16” diameter holes for 1/4” button-head anchors.
714.288.1770 | sales@pdidet.com | pdidet.com
Page | 15
GRAB BARS
GB1000/GB2000
Stainless steel detention grab bars for use
in handicap accessible areas.
SPECIFICATIONS
Material Dimensions
Tube: 18 gauge, type 304 stainless steel
Mounting Plates: 11 gauge stainless steel
Tube: 11/2” diameter
Mounting Plates: 4” diameter
INSTALLATION
Three 7/16” diameter holes drilled in mounting plates for anchors.
Anchors not by PDI.
GB1000
OPTIONS
Closure Plate - bottom gap between wall and grab bar closed with a
10 gauge plate with 1/4” diameter holes for drainage.
Page | 16
GB2000
SAFE BAR
SB1000
Continuous extruded aluminum grab bar, hard-coat anodized.
SPECIFICATIONS
Material Dimensions
Extruded 6063-T52 aluminum
11/2” diameter grab area
11/2” gap from grab area and wall
7/16” diameter holes for 3/8” anchors. Anchors not by PDI.
OPTIONS
SB1000
INSTALLATION
Safe bar end caps.
714.288.1770 | sales@pdidet.com | pdidet.com
Page | 17
Headquarters
577 N. Batavia
Orange, CA 92868
714 288 1770 714 288 1769 fax
sales@pdidet.com
pdifurn 0513