:
: 686013
: CTX+R1610230A
CONTAX-R+relays 16A 1NO 230Vac
EAN13: 5413656860136
Active
Series
Relays - Contax R+
Rated switching capacity (A)
16A
Contact combination
1NO
Coil voltage (V)
230 Vac
AC/DC
AC
Coil DC/AC factor
0.5:1 (115 Vdc)
Standard packing
12
Standards
NBN EN 60947-4-1, CE
Number of modules Drive module
1
Number of modules With section power contact
2
Coil Voltage range (in % from Un)
85-110%
Electrical life service Mechanical
2 x 10<SUP>6</SUP> controls
Reclosing time when closing
<10 ms
Operating temperature
-20°C / 45°C
Connection of the lamps
1.5-10 mm²
Possible volt/phase Fuse rating (gL)
20 A
Possible volt for non-compensated fluor-lamps
900 VA
Switching on voltage NO contact
<0.040 s
Switching on voltage NC contact
<0.020 s
Switching off voltage NO or NC contact
<0.050 s
Possible volt/phase Max volt AC-1- Operating mod
3 kW
Possible volt/phase Max volt AC-1- Contactbloc
8.5 kW
ge.com/ex/industrialsolutions
: 30/09/2016
1/2
: 686013
CONTAX-R+relays 16A 1NO 230Vac
Possible volt/phase Max volt AC-1- Max volt AC-5b
1.8 kW
Possible volt/phase Max volt AC-7b- Operating mod
0.9 kW
Possible volt/phase Max volt AC-3- Contatcbloc
1.5 kW/250V 2.2kW/400V
Possible volt/phase Min volt per phase (at 5V)
2W
Possible volt- sockets & incandes lamps (40 to 200W)
1800 W
Possible volt for compensated fluor-lamps- Serie
1800 VA
Possible volt for compensated fluor-lamps- Parallel
500 VA
Electrical life service Electrical at full voltage AC-1
3 x 10<SUP>5</SUP> controls
Coil power-loss - AC
1.8 VA
Coil power-loss - DC
2.1 W
Coil pick-up power (AC)
3.4 VA
Weight
0.118 kg
ETIM 5.0
EC001652
ETIM 6.0
EC001652
More info on website
• Function:
Relays are electromechanically controlled switches used to control low power loads.
• Applications:
Switching of lighting, heating, etc.
Galvanic insulation of i.e. status signalisation lamps from a (high) power (high voltage) circuit.
Galvanic insulation of PLC-inputs or outputs to avoid destruction through excessive voltage.
• Features:
The switch position is visualised by the position of the front handle.
The safety terminals are equipped with captive Pozidriv screws and have IP20 protection degree.
Add-on auxiliary contacts available.
Because of the advanced product design, no spacers are needed.
Increased safety: sealing caps for both coil and terminal are available.
ge.com/ex/industrialsolutions
: 30/09/2016
2/2