AC Power for
Business-Critical Continuity
AC Distribution Panel
Key Features
Product Overview
■
Flexible mounting options —
allow for relay rack or wall
mounting
■
Compact panel — fits in 19" relay
rack with 5U height
■
Field wiring provisions — to meet
code requirements
■
Two-wire AC input — allows for
connecting to 120V inverters
without losing breaker positions
The LACP100A is ideal for inverter installations where overcurrent protection or separation
of load circuits is required on the output of the inverter system.
Snap-in breakers — provide easy
installation and removal
Additional Information
■
The LACP100A is a 120VAC, 2 wire, 100Amp AC distribution panel that can be populated
with SquareD breakers. This AC distribution panel is used where it is necessary to provide
overcurrent protection or separation of a single source into multiple feeds on the output of
an AC source. This panel can either be wall-mounted or mounted in a 19" or 23" relay rack.
The breaker panel accepts SquareD QO breakers from 10Amps to 70Amps. The breakers
snap into one of (8) mounting positions. This panel can also be configured as an isolated
ground panel with an optional isolation ground bar kit.
Application
Specify model LACP100A, spec. number 426806600 for additional specification, engineering or installation information.
LACP100A
AC Distribution Panel
1
PDS-INV-066 / January 2007
AC Distribution Panel
Specifications
Breakers
Input
Amperes
Breaker P/N
AC Voltage
120VAC
10
123061
Frequency
50/60Hertz
15
123062
Input Current
100A
20
123063
25
123064
120VAC
30
123065
Frequency
50/60Hertz
35
123066
Output Current
100Amps*
40
123067
10,000A
45
123068
50
123069
Output
AC Voltage
Short Circuit Current Rating
Environmental
Operating Temp.
-20C to 40C
60
123070
Safety Compliance
UL/cUL
70
123071
General
Dimensions (H x W x D)
5U x 17.53" x 4.42"
5U x 445mm x 112mm
Knockouts
Rear: (1) 3/4" conduit KO, (1) 1-1/4" conduit KO,
(6) 1/2" conduit KO’s, (4) 1" conduit KO’s
Bottom: (1) 1-1/4" conduit KO, (1) 3/4" conduit KO,
(6) 1/2" conduit KO’s, and (2) 1" conduit KO’s
Approx. Weight
8.75lbs.
4kgs
* Not to exceed 80% of each circuit breaker rating.
Emerson Network Power.
The global leader in enabling
business-critical continuity.
© 2006 Emerson Network Power Energy Systems,
North America, Inc. All rights reserved.
Emerson Network Power Energy Systems
1122 F St. Lorain, OH 44052
Toll Free: 800-800-1280 (USA and Canada)
Telephone: 440-246-6999 Fax: 440-246-4876
Web: EmersonNetworkPower.com/EnergySystems
2
AC Power
Connectivity
DC Power
Embedded Computing
Embedded Power
Monitoring
Outside Plant
Power Switching & Controls
Precision Cooling
Racks & Integrated Cabinets
Services
Surge Protection
This publication is issued to provide outline information only which (unless agreed by Emerson Network Power Energy Systems, North
America, Inc. in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a
representation relating to the products or services concerned.
Emerson Network Power Energy Systems, North America, Inc. reserves the right to alter without notice the specification, design or
conditions of supply of any product or service.
The Emerson logo is a trademark and a service mark of Emerson
Electric Co. Emerson Network Power is a division of Emerson
Electric Co. Vortex®, Candeo™ and LORAIN® are trademarks of
Emerson Network Power Energy Systems, North America, Inc.
Printed in USA
PDS-INV-066 / January 2007