DataMan® Configuration
Codes
9/26/2014
Version 5.4
Legal Notices
The software described in this document is furnished under license, and may be used or
copied only in accordance with the terms of such license and with the inclusion of the
copyright notice shown on this page. Neither the software, this document, nor any copies
thereof may be provided to, or otherwise made available to, anyone other than the
licensee. Title to, and ownership of, this software remains with Cognex Corporation or its
licensor. Cognex Corporation assumes no responsibility for the use or reliability of its
software on equipment that is not supplied by Cognex Corporation. Cognex Corporation
makes no warranties, either express or implied, regarding the described software, its
merchantability, non-infringement or its fitness for any particular purpose.
The information in this document is subject to change without notice and should not be
construed as a commitment by Cognex Corporation. Cognex Corporation is not responsible
for any errors that may be present in either this document or the associated software.
No part of this document may be reproduced or transmitted in any form or by any means,
electronic or mechanical, for any purpose, nor transferred to any other media or language
without the written permission of Cognex Corporation.
Copyright © 2014 Cognex Corporation. All Rights Reserved.
Portions of the hardware and software provided by Cognex may be covered by one or more
of the U.S. and foreign patents listed below as well as pending U.S. and foreign patents.
Such pending U.S. and foreign patents issued after the date of this document are listed on
Cognex web site at http://www.cognex.com/patents.
VisionPro
5481712, 5495537, 5548326, 5583954, 5602937, 5640200, 5751853, 5768443, 5825913, 5850466, 5872870, 5901241, 5943441, 5978080, 5978521,
5987172, 6005978, 6039254, 6064388, 6075881, 6137893, 6141033, 6167150, 6215915, 6240208, 6324299, 6381366, 6381375, 6411734, 6421458,
6459820, 6490375, 6516092, 6563324, 6658145, 6687402, 6690842, 6697535, 6718074, 6748110, 6771808, 6804416, 6836567, 6850646, 6856698,
6920241, 6959112, 6963338, 6973207, 6975764, 6985625, 6993177, 6993192, 7006712, 7016539, 7043081, 7058225, 7065262, 7088862, 7164796,
7190834, 7242801, 7251366, 7313761, EP0713593, JP3522280, JP3927239
DataMan
5742037, 5943441, 6215915, 6236769, 6282328, 6381375, 6408109, 6457032, 6690842, 6941026, 7175090, 7181066, 7412106, 7427028, 7549582,
7604174, 7614563, 7617984, US-2005-0087601-A1, US-2006-0131418-A1, US-2006-0131419-A1, US-2006-0133757-A1, US-2007-0090193-A1, US-20070091332-A1, US-2007-0152064-A1, US-2007-0170259-A1, US-2008-0004822-A1, US-2008-0011855-A1, US-2008-0142604-A1, US-2008-0143838-A1, US2008-0158365-A1, US-2009-0090781-A1, US-2009-0108073, US-2009-0121027-A1, US-2009-0166424-A1, US-2009-0294541-A1, WO06065619A1,
EP1687752
CVL
5495537, 5548326, 5583954, 5602937, 5640200, 5717785, 5751853, 5768443, 5825483, 5825913, 5850466, 5859923, 5872870, 5901241, 5943441,
5949905, 5978080, 5987172, 5995648, 6002793, 6005978, 6064388, 6067379, 6075881, 6137893, 6141033, 6157732, 6167150, 6215915, 6240208,
6240218, 6324299, 6381366, 6381375, 6408109, 6411734, 6421458, 6457032, 6459820, 6490375, 6516092, 6563324, 6658145, 6687402, 6690842,
6718074, 6748110, 6751361, 6771808, 6798925, 6804416, 6836567, 6850646, 6856698, 6920241, 6959112, 6975764, 6985625, 6993177, 6993192,
7006712, 7016539, 7043081, 7058225, 7065262, 7088862, 7164796, 7190834, 7242801, 7251366, EP0713593, JP3522280, JP3927239
VGR
5495537, 5602937, 5640200, 5768443, 5825483, 5850466, 5859923, 5949905, 5978080, 5995648, 6002793, 6005978, 6075881, 6137893, 6141033,
6157732, 6167150, 6215915, 6324299, 6381375, 6408109, 6411734, 6421458, 6457032, 6459820, 6490375, 6516092, 6563324, 6658145, 6690842,
6748110, 6751361, 6771808, 6804416, 6836567, 6850646, 6856698, 6959112, 6975764, 6985625, 6993192, 7006712, 7016539, 7043081, 7058225,
7065262, 7088862, 7164796, 7190834, 7242801, 7251366
OMNIVIEW
6215915, 6381375, 6408109, 6421458, 6457032, 6459820, 6594623, 6804416, 6959112, 7383536
CVL Vision Library
5495537, 5548326, 5583954, 5602937, 5640200, 5717785, 5751853, 5768443, 5825483, 5825913, 5850466, 5859923, 5872870, 5901241, 5943441,
5949905, 5978080, 5987172, 5995648, 6002793, 6005978, 6064388, 6067379, 6075881, 6137893, 6141033, 6157732, 6167150, 6215915, 6240208,
6240218, 6324299, 6381366, 6381375, 6408109, 6411734, 6421458, 6457032, 6459820, 6490375, 6516092, 6563324, 6658145, 6687402, 6690842,
6718074, 6748110, 6751361, 6771808, 6798925, 6804416, 6836567, 6850646, 6856698, 6920241, 6959112, 6975764, 6985625, 6993177, 6993192,
7006712, 7016539, 7043081, 7058225, 7065262, 7088862, 7164796, 7190834, 7242801, 7251366, EP0713593, JP3522280, JP3927239
SMD 4
5995648, 5850466, 6751361, 6690842, 6563324, 6490375, 5949905, 5978080, 6137893, 6167150, 6075881, 6748110, 5859923, 6411734, 6324299,
6516092, 7190834, 6658145, 6836567, 6850646, 6975764, 6985625, 6993192, 7006712, 7043081, 7058225, 7065262, 7088862, 7164796, 7251366,
6856698, 6002793, 6005978, 6771808, 6804416, 7016539, 6959112, 5602937, 7242801, 5640200, 5495537, 5768443, 5825483, 6421458, 6459820,
DataMan® Configuration Codes
9/26/2014 | Version 5.4
Page |2
Legal Notices
6215915, 6381375, 6457032, 6157732, 6408109, 6141033, 6026176, 6442291, 6151406, 6396942, 6614926, 5371690, 5845007, 5943441, 6963338,
5805722, 5909504, 5933523, 5964844, 5974169, 5987172, 6078700, 6252986, 6278796, 6307210, 6408429, 6424734, 6526165, 6571006, 6639624,
6681039, 6748104, 6813377, 6853751, 6898333, 6950548, 6993177, 7139421, 5757956
BGA II and BGA III
5495537, 5602937, 5640200, 5768443, 5801966, 5825483, 5850466, 5859923, 5949905, 5978080, 5995648, 6002793, 6005978, 6026176, 6055328,
6075881, 6115042, 6118893, 6130959, 6137893, 6141009, 6141033, 6151406, 6157732, 6167150, 6215915, 6289117, 6324299, 6353676, 6381375,
6396942, 6408109, 6411734, 6421458, 6442291, 6457032, 6459820, 6490375, 6516092, 6563324, 6577775, 6614926, 6658145, 6690842, 6748110,
6751361, 6771808, 6804416, 6836567, 6850646, 6856698, 6959112, 6975764, 6985625, 6993192, 7006712, 7016539, 7043081, 7058225, 7065262,
7088862, 7164796, 7190834, 7242801, 7251366
Wire Bonder
5495537, 5532739, 5581632, 5602937, 5640199, 5640200, 5642158, 5676302, 5754679, 5757956, 5768443, 5825483, 5835622, 5850466, 5859923,
5861909, 5949905, 5978080, 5991436, 5995648, 6002793, 6005978, 6035066, 6061467, 6075881, 6137893, 6141033, 6157732, 6167150, 6215915,
6289492, 6324299, 6381375, 6408109, 6411734, 6421458, 6457032, 6459820, 6490375, 6516092, 6563324, 6658145, 6690842, 6748110, 6751361,
6771808, 6804416, 6836567, 6850646, 6856698, 6959112, 6975764, 6985625, 6993192, 7006712, 7016539, 7043081, 7058225, 7065262, 7088862,
7164796, 7171036, 7190834, 7242801, 7251366
The following are registered trademarks of Cognex Corporation:
acuReader® BGAII® Check it with Checker® Checker® Cognex Vision for Industry CVC-1000® CVL® DataMan® DisplayInspect® DVT® EasyBuilder®
IDMax® In-SightIn-Sight 2000® In-Sight® (insignia with cross-hairs) MVS-8000® OmniView® PatFind® PatFlex® PatInspect® PatMax® PatQuick®
SensorView® SmartLearn® SmartView® SMD4® UltraLight® Vision Solutions® VisionPro® VisionView®
The following are trademarks of Cognex Corporation:
3D-Locate™ 3DMax™ CheckPoint™ Cognex VSoC™ FFD™ iLearn™ InspectEdge™ Legend™ LineMax™ NotchMax™ ProofRead™ SmartAdvisor™
SmartSync™ SmartSystem™
Other product and company names mentioned herein are the trademarks, or registered
trademarks, of their respective owners.
DataMan® Configuration Codes
9/26/2014 | Version 5.4
Page |3
Contents
Configuration Codes ................................................................................................... 6
Product Settings ........................................................................................................ 7
Reset.......................................................................................................................... 8
Diagnostics ................................................................................................................ 9
Setup ....................................................................................................................... 10
Light Aimer .............................................................................................................. 11
Trigger Type............................................................................................................. 12
Global Shutter Emulation ......................................................................................... 13
Custom Commands .................................................................................................. 14
Maximum Exposure .................................................................................................. 15
Symbology Settings ................................................................................................. 18
2D Symbology Settings ............................................................................................ 27
1D Symbology Settings ............................................................................................ 28
Training ................................................................................................................... 30
Data Validation/Data Formatting ............................................................................. 31
Non-Printable Characters ......................................................................................... 33
Wireless ................................................................................................................... 34
Buffering .................................................................................................................. 35
Power Management ................................................................................................. 36
Wake-up Message .................................................................................................... 37
PS/2 Keyboard Emulation Enable............................................................................. 38
Mobile Computer Keyboard Emulation ..................................................................... 39
ASCII keyboard command codes .............................................................................. 40
USB Connection........................................................................................................ 55
USB Mode ................................................................................................................. 56
Communication Settings .......................................................................................... 58
RS-232 Baud Rate .................................................................................................... 62
RS-232 Parity Settings ............................................................................................. 64
RS-232 Databit Settings ........................................................................................... 66
RS-232 Stopbit Settings ........................................................................................... 67
RS-232 Handshaking ................................................................................................ 68
RS-232 Routing ........................................................................................................ 69
Network Settings ..................................................................................................... 70
Decode Settings ....................................................................................................... 71
Master/Slave ........................................................................................................... 72
Keyboard Country .................................................................................................... 73
DataMan® Configuration Codes
9/26/2014 | Version 5.4
Page |4
Contents
Alt Key Combo Zero Padding .................................................................................... 76
USB Keyboard Inter-Character Delay ....................................................................... 77
Code Quality Settings ............................................................................................... 78
DataMan® Configuration Codes
9/26/2014 | Version 5.4
Page |5
Configuration Codes
Configuration Codes
Configuration Codes are special Data Matrix codes to configure your reader without the
Setup Tool. Lights and beeping indicate that a Configuration Code was read. Beeps can also
indicate that a command has not been executed: if the code is read but the command is
not executed (e.g. because of the command not being valid for the type of reader used for
reading the code), the reader gives 2 beeps.
You can read these codes without enabling the decoding of Data Matrix symbols. In such
cases, make sure that you use Manual or Presentation trigger mode.
Adjust focus settings if you have trouble reading Configuration Codes.
NOTE: When using wireless handheld readers, the reader must be put on the base station
for security reasons after reading a printed configuration code.
DataMan® Configuration Codes
9/26/2014 | Version 5.4
Page |6
Product Settings
Product Settings
Reset Scanner to Factory Defaults
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
Reset Code Quality Calibration
DM100 ● DM8600
Reset Base Station to Factory Defaults
DM8000Base
DataMan® Configuration Codes
9/26/2014 | Version 5.4
Page |7
Reset
Reset
Reboot Scanner
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
Reboot Base Station
DM8000Base
DataMan® Configuration Codes
9/26/2014 | Version 5.4
Page |8
Diagnostics
Diagnostics
Output Diagnostic String
(only with RS-232 and USB connections)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
Output Diagnostic String
(through the DM8000 Base Station with RS-232 and
USB connections)
DM8000 wireless
DataMan® Configuration Codes
9/26/2014 | Version 5.4
Page |9
Setup
Setup
Enable Setup 1 Only
DM8500 ● DM8600 ● DM9500
Enable Setup 2 Only
DM8500 ● DM8600 ● DM9500
Enable Setup 3 Only
DM8500 ● DM8600 ● DM9500
Enable Setup 4 Only
DM8500 ● DM8600 ● DM9500
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 10
Light Aimer
Light Aimer
*Light aimer ON
(default for DMAE50, DM50, DM60, DM100, DM200,
and DM8000)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM8000 ● DM9500
*Light aimer OFF
(default for DM300 and DM500)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM8000 ● DM9500
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 11
Trigger Type
Trigger Type
Enable Presentation
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
*Enable Manual (button)
(default for all devices except for DM500)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
Enable Single (external)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503
Enable Burst (external)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503
Enable Self (internal)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503
*Enable Continuous (external)
(default for DM500)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 12
Global Shutter Emulation
Global Shutter Emulation
Enable Global Shutter Emulation
DMAE50
*Disable Global Shutter Emulation
DMAE50
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 13
Custom Commands
Custom Commands
Enable Serial Trigger
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503
*Disable Serial Trigger
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503
Enable Echo Commands
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503
*Disable Echo Commands
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 14
Maximum Exposure
Maximum Exposure
100 us
DM50 ● DM60 ● DM300 ● DM500 ● DM503 ●
DM8000 ● DM9500
133 us
DM50 ● DM60 ● DM300 ● DM500 ● DM503 ●
DM8000 ● DM9500
*170 us
(default for DM500)
DM50 ● DM60 ● DM300 ● DM500 ● DM503 ●
DM8000 ● DM9500
250 us
DM50 ● DM60 ● DM300 ● DM503 ● DM8000 ●
DM9500
500 us
DM50 ● DM60 ● DM300 ● DM503 ● DM8000 ●
DM9500
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 15
Maximum Exposure
800 us
DM50 ● DM60 ● DM300 ● DM503 ● DM8000 ●
DM9500
*1000 us
(default for DM50, DM60, DM300, and DM503)
DM50 ● DM60 ● DM300 ● DM503 ● DM8000 ●
DM9500
2000 us
DM50 ● DM60 ● DM503 ● DM8000 ● DM9500
5000 us
DM50 ● DM60 ● DM503 ● DM8000 ● DM9500
8000 us
DM50 ● DM60 ● DM503 ● DM8000 ● DM9500
10000 us
DM50 ● DM60 ● DM503 ● DM8000 ● DM9500
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 16
Maximum Exposure
*13333 us
(default for DM8000)
DM50 ● DM60 ● DM503 ● DM8000 ● DM9500
20000 us
DM50 ● DM60 ● DM503 ● DM8000 ● DM9500
25000 us
DM50 ● DM60 ● DM503 ● DM8000 ● DM9500
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 17
Symbology Settings
Symbology Settings
*Enable ID Max
DM50 ● DM60 ● DM100 ● DM200 ● DM300 ●
DM500 ● DM503
Enable ID Quick
DM50 ● DM60 ● DM100 ● DM200 ● DM300 ●
DM500 ● DM503
*Enable Data Matrix
(default for all devices except for DM500)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
*Disable Data Matrix
(default for DM500)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
Enable QR Code
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
*Disable QR Code
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 18
Symbology Settings
Enable MaxiCode
(Only supported on X models)
DM50 ● DM60 ● DM300 ● DM500 ● DM503 ●
DM8050 ● DM8600
*Disable MaxiCode
(Only supported on X models)
DM50 ● DM60 ● DM300 ● DM500 ● DM503 ●
DM8050 ● DM8600
Enable Aztec Code
DM300 ● DM503 ● DM8050 ● DM8600
*Disable Aztec Code
DM300 ● DM503 ● DM8050 ● DM8600
*Enable Code 128
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
Disable Code 128
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 19
Symbology Settings
*Enable UPC/EAN
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
Disable UPC/EAN
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
*Enable Code 39
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
Disable Code 39
DMAE50 ● DM50 ● DM60 ● M100 ● DM200 ● DM300
● DM500 ● DM503 ● DM700 ● DM8000 ● DM9500
*Enable Code 93
(default for all devices except for DM500)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
*Disable Code 93
(default for DM500)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 20
Symbology Settings
Enable Interleaved 2 of 5
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000
*Disable Interleaved 2 of 5
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
*Enable Codabar
(default for all devices except for DM500)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
*Disable Codabar
(default for DM500)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
Enable Pharmacode
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
*Disable Pharmacode
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 21
Symbology Settings
*Enable PDF417
(default for handheld readers)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
*Disable PDF417
(default for fixed mount readers)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
Enable Databar
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
*Disable Databar
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
Enable Micro PDF417
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
*Disable Micro PDF417
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000
● DM9500
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 22
Symbology Settings
Enable EAN.UCC Composite
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
*Disable EAN.UCC Composite
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
Enable POSTNET
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
*Disable POSTNET
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
Enable PLANET
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
*Disable PLANET
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 23
Symbology Settings
Enable Japan Post
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
*Disable Japan Post
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
Enable Australia Post
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
*Disable Australia Post
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
Enable UPU
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
*Disable UPU
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 24
Symbology Settings
Enable Intelligent Mail Barcode
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
*Disable Intelligent Mail Barcode
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
DataMatrix Symbol Difficulty - Easy
DM8100 ● DM8500 ● DM8600
*DataMatrix Symbol Difficulty - Medium
DM8100 ● DM8500 ● DM8600
DataMatrix Symbol Difficulty - Hard
DM8100 ● DM8500 ● DM8600
*QR Symbol Difficulty - Easy
DM8100 ● DM8500 ● DM8600
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 25
Symbology Settings
QR Symbol Difficulty - Medium
DM8100 ● DM8500 ● DM8600
QR Symbol Difficulty - Hard
DM8100 ● DM8500 ● DM8600
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 26
2D Symbology Settings
2D Symbology Settings
Enable Extreme Print Growth
(Data Matrix only)
DMAE50 ● DM100 ● DM200 ● DM700 ● DM8100 ●
DM8500 ● DM9500
*Disable Extreme Print Growth
(Data Matrix only)
DMAE50 ● DM100 ● DM200 ● DM700 ● DM8100 ●
DM8500 ● DM9500
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 27
1D Symbology Settings
1D Symbology Settings
*Enable Use Target Decoding
(simulates laser scanning)
(default for handheld readers except for DM8000)
DMAE50 ● DM100 ● DM200 ● DM700 ● DM8000 ●
DM9500
*Disable Use Target Decoding
(simulates laser scanning)
(default for fixed mount readers, DM8000,
and DM9500)
DMAE50 ● DM100 ● DM200 ● DM700 ● DM8000 ●
DM9500
*Enable Short Quiet Zone
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ●
DM8000 ● DM9500
Disable Short Quiet Zone
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ●
DM8000
Code Orientation: Omnidirectional
DM50 ● DM60 ● DM300 ● DM500 ● DM503
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 28
1D Symbology Settings
Code Orientation: Ladder and Picket Fence
DM50 ● DM60 ● DM300 ● DM500 ● DM503
Code Orientation: Ladder
DM50 ● DM60 ● DM300 ● DM500 ● DM503
Code Orientation: Picket Fence
(for readers which support oriented 1-D
reading)
DM50 ● DM60 ● DM300 ● DM500 ● DM503
*Enable HOTBARS
DM500
Disable HOTBARS
DM500
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 29
Training
Training
Enable incremental training
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503
*Disable incremental training
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503
Enable untrained symbologies
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503
*Disable untrained symbologies
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 30
Data Validation/Data Formatting
Data Validation/Data Formatting
Enable DoD UID Validation with UII Output
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ●
DM8000 ● DM9500
*Disable DoD UID Validation with UII
Output
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ●
DM8000 ● DM9500
Use Next Code As Match String
(Enable Match String Validation prior to
reading this code)
DMAE50 ● DM50 ● DM60 ● DM100 ●
DM200 ● DM300 ● DM500 ● DM503 ●
DM700 ● DM8000 ● DM9500
Enable Input 1 Save Match String
DM50 ● DM60 ● DM300 ● DM500 ●
DM503
*Disable Input 1 Save Match String
DM50 ● DM60 ● DM300 ● DM500 ●
DM503
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 31
Data Validation/Data Formatting
Enable Button Save Match String
DM300 ● DM500 ● DM503
*Disable Button Save Match String
DM300 ● DM500 ● DM503
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 32
Non-Printable Characters
Non-Printable Characters
Enable Translate Unprintable Characters
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
*Disable Translate Unprintable Characters
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 33
Wireless
Wireless
Unassign Reader from Base Station
DM8000
Force Pairing Mode
DM8050, DM8600
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 34
Buffering
Buffering
*Enable Offline Buffering
DM8000 Wireless ● DM9500
Disable Offline Buffering
DM8000 Wireless ● DM9500
*Offline Buffering Mode - Multiple
DM8000 Wireless
Offline Buffering Mode - Single
DM8000 Wireless
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 35
Power Management
Power Management
Disable Hibernation Mode
DM8000 Wireless ● DM9500
*Enable Hibernation Mode
DM8000 Wireless ● DM9500
Disable Power Off Mode
DM8000 Wireless ● DM9500
Enable Power Off Mode
DM8000 Wireless ● DM9500
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 36
Wake-up Message
Wake-up Message
Enable Output Diagnostic String on Wake-up
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
*Disable Output Diagnostic String on Wake-up
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000 ●
DM9500
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 37
PS/2 Keyboard Emulation Enable
PS/2 Keyboard Emulation Enable
PS/2 Keyboard Emulation Enable
DM50 ● DM700 ● DM8000
DO NOT scan this code when you have an
actual keyboard connected.
*PS/2 Keyboard Emulation Disable
DM50 ● DM700 ● DM8000
Base Station PS/2 Keyboard Emulation Enable
DM8000Base
DO NOT scan this code when you have an
actual keyboard connected.
Base Station PS/2 Keyboard Emulation Disable
DM8000Base
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 38
Mobile Computer Keyboard Emulation
Mobile Computer Keyboard Emulation
Mobile Computer Keyboard Emulation Enable
DM9500
*Mobile Computer Keyboard Emulation Disable
DM9500
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 39
ASCII keyboard command codes
ASCII keyboard command codes
1. Set the data formatting on the DataMan to "Full String".
2. Put the reader into keyboard mode and scan the code. The DataMan will execute
this command.
ENTER
main ENTER, not numeric keypad ENTER
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
ESCAPE
DM50 ● DM60 ● DM700 ● DM8000 ● DM8000Base
BACKSPACE
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
TAB
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+A
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+B
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+C
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 40
ASCII keyboard command codes
ALT+D
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+E
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+F
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+G
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+H
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+I
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+J
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+K
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 41
ASCII keyboard command codes
ALT+L
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+M
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+N
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+O
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+P
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+Q
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+R
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+S
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 42
ASCII keyboard command codes
ALT+T
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+U
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+V
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+W
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+X
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+Y
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+Z
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
PRINTSCREEN
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 43
ASCII keyboard command codes
F1
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
F2
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
F3
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
F4
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
F5
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
F6
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
F7
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
F8
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
F9
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
F10
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 44
ASCII keyboard command codes
HOME
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ARROW UP
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
PAGE UP
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ARROW LEFT
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ARROW RIGHT
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
END
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ARROW DOWN
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
PAGE DOWN
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
INSERT
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
DELETE
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 45
ASCII keyboard command codes
GUI LEFT
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
GUI RIGHT
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+F1
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+F2
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+F3
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+F4
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+F5
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+F6
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 46
ASCII keyboard command codes
ALT+F7
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+F8
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+F9
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+F10
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
F11
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
F12
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+F11
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
ALT+F12
specifically the left ALT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 47
ASCII keyboard command codes
ALT+ENTER
specifically the left ALT key and main ENTER
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+A
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+B
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+C
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+D
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+E
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+F
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+G
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 48
ASCII keyboard command codes
CTRL+H
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+I
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+K
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+L
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+M
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+N
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+O
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 49
ASCII keyboard command codes
CTRL+P
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+Q
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+R
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+S
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+T
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+U
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+V
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+W
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 50
ASCII keyboard command codes
CTRL+X
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+Y
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+Z
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+F1
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+F2
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+F3
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+F4
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+F5
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 51
ASCII keyboard command codes
CTRL+F6
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+F7
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+F8
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+F9
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+F10
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+F11
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+F12
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
CTRL+ENTER
specifically the right CTRL key and main ENTER
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 52
ASCII keyboard command codes
CTRL
specifically the right CTRL key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
SHIFT+F1
specifically the left SHIFT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
SHIFT+F2
specifically the left SHIFT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
SHIFT+F3
specifically the left SHIFT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
SHIFT+F4
specifically the left SHIFT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
SHIFT+F5
specifically the left SHIFT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
SHIFT+F6
specifically the left SHIFT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
SHIFT+F7
specifically the left SHIFT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 53
ASCII keyboard command codes
SHIFT+F8
specifically the left SHIFT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
SHIFT+F9
specifically the left SHIFT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
SHIFT+F10
specifically the left SHIFT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
SHIFT+F11
specifically the left SHIFT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
SHIFT+F12
specifically the left SHIFT key
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
SHIFT+ENTER
specifically the left SHIFT key and main ENTER
DM50 ● DM60 ● DM700 ● DM8000 ●
DM8000Base
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 54
USB Connection
USB Connection
*USB-COM/RS-232
DMAE50 ● DM50 ● DM60 ● DM100 ● DM700 ●
DM8000
USB Keyboard
DMAE50 ● DM50 ● DM60 ● DM100 ● DM700 ●
DM8000
Enable USB Keyboard for the base station
DM8000Base
*Disable USB Keyboard for the base station
DM8000Base
Enable ‘Enumerate in HID mode only’
Reboot needed for changing between HID and USB
mode of base/reader!
DM8000Base
Disable ‘Enumerate in HID mode only’
Reboot needed for changing between HID and USB
mode of base/reader!
DM8000Base
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 55
USB Mode
USB Mode
USB compatibility mode enabled
DMAE50 ● DM50 ● DM60 ● DM100 ● DM700 ●
DM8000
*USB compatibility mode disabled
DMAE50 ● DM50 ● DM60 ● DM100 ● DM700 ●
DM8000
USB compatibility mode enabled
DM8000Base
USB compatibility mode disabled
DM8000Base
USB 2.0 mode
DM8000
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 56
USB Mode
*USB 1.1 mode
DM8000
USB 2.0 mode on base station
DM8000Base
*USB 1.1 mode on base station
DM8000Base
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 57
Communication Settings
Communication Settings
*Enable DHCP
(default for all Ethernet readers)
DMAE50 ● DM60 ● DM200 ● DM300 ● DM500 ●
DM503 ● DM8000
DO NOT SCAN this code with a DM8000 wireless
reader.
Enable Multi-Port (RS-232 Sharing)
DM50 ● DM60 ● DM100 ● DM200 ● DM300 ● DM500
● DM503
*Disable Multi-Port (RS-232 Sharing)
DM50 ● DM60 ● DM100 ● DM200 ● DM300 ● DM500
● DM503
Enable EtherNet/IP
DM60 ● DM200 ● DM300 ● DM500 ● DM503 ●
DM8000 (corded)
Enable EtherNet/IP
DM8000Base (DM8000 wireless)
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 58
Communication Settings
*Disable EtherNet/IP
DM60 ● DM200 ● DM300 ● DM500 ● DM503 ●
DM8000 (corded)
*Disable EtherNet/IP
DM8000Base (DM8000 wireless)
Enable PROFINET
DM60 ● DM200 ● DM300 ● DM500 ● DM503 ●
DM8000 (corded)
Enable PROFINET
DM8000Base (DM8000 wireless)
*Disable PROFINET
DM60 ● DM200 ● DM300 ● DM500 ● DM503 ●
DM8000 (corded)
*Disable PROFINET
DM8000Base (DM8000 wireless)
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 59
Communication Settings
Enable SLMP Protocol
DM60 ● DM200 ● DM300 ● DM500 ● DM503 ●
DM8000 (corded)
Enable SLMP Protocol
DM8000Base (DM8000 wireless)
*Disable SLMP Protocol
DM60 ● DM200 ● DM300 ● DM500 ● DM503 ●
DM8000 (corded)
*Disable SLMP Protocol
DM8000Base (DM8000 wireless)
Enable Modbus TCP
DM60 ● DM200 ● DM300 ● DM500 ● DM503 ●
DM8000 (corded)
Enable Modbus TCP
DM8000Base (DM8000 wireless)
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 60
Communication Settings
*Disable Modbus TCP
DM60 ● DM200 ● DM300 ● DM500 ● DM503 ●
DM8000 (corded)
*Disable Modbus TCP
DM8000Base (DM8000 wireless)
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 61
RS-232 Baud Rate
RS-232 Baud Rate
9600 BPS
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000
(corded)
9600 BPS
DM8000Base (DM8000 wireless)
19200 BPS
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000
(corded)
19200 BPS
DM8000Base (DM8000 wireless)
38400 BPS
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000
(corded)
38400 BPS
DM8000Base (DM8000 wireless)
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 62
RS-232 Baud Rate
*57600 BPS
(default for DMAE50, DM300, and DM8000)
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM8000
(corded)
57600 BPS
DM8000Base (DM8000 wireless)
*115200 BPS
(default for DM50, DM60, DM100, DM200, DM500,
DM503, and DM700)
DM50 ● DM60 ● DM100 ● DM200 ● DM300 ● DM500
● DM503 ● DM700 ● DM8050 ● DM8600
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 63
RS-232 Parity Settings
RS-232 Parity Settings
None
All readers
None
DM8000Base (DM8000 wireless)
Odd
All readers
Odd
DM8000Base (DM8000 wireless)
Even
All readers
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 64
RS-232 Parity Settings
Even
DM8000Base (DM8000 wireless)
Mark
DM8050 ● DM8600
Mark
DM8000Base (DM8000 wireless)
Space
DM8050 ● DM8600
Space
DM8000Base (DM8000 wireless)
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 65
RS-232 Databit Settings
RS-232 Databit Settings
Databit 7
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM7500 ●
DM8000 (corded)
Databit 7
DM8000Base (DM8000 wireless)
Databit 8
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM7500 ●
DM8000 (corded)
Databit 8
DM8000Base (DM8000 wireless)
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 66
RS-232 Stopbit Settings
RS-232 Stopbit Settings
Stopbit 1
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM7500 ●
DM8000 (corded)
Stopbit 1
DM8000Base (DM8000 wireless)
Stopbit 2
DMAE50 ● DM50 ● DM60 ● DM100 ● DM200 ●
DM300 ● DM500 ● DM503 ● DM700 ● DM7500 ●
DM8000 (corded)
Stopbit 2
DM8000Base (DM8000 wireless)
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 67
RS-232 Handshaking
RS-232 Handshaking
*RTS/CTS Off
DMAE50 ● DM7500 ● DM8000 (corded)
RTS/CTS Off
DM8000Base (DM8000 wireless)
RTS/CTS On
DMAE50 ● DM7500 ● DM8000 (corded)
RTS/CTS On
DM8000Base (DM8000 wireless)
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 68
RS-232 Routing
RS-232 Routing
*Route to associated reader
DM8000 (wireless)
Route to base station
DM8000 (wireless)
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 69
Network Settings
Network Settings
Enable Network Client
DM60 ● DM300 ● DM500 ● DM503 ● DM8000
*Disable Network Client
DM60 ● DM300 ● DM500 ● DM503 ● DM8000
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 70
Decode Settings
Decode Settings
*Never Read the Same Code Twice Off
DM50 ● DM60 ● DM300 ● DM500 ● DM503 ●
DM8000
Never Read the Same Code Twice On
DM50 ● DM60 ● DM300 ● DM500 ● DM503 ●
DM8000
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 71
Master/Slave
Master/Slave
Enable MST
DM60 ● DM300 ● DM500 ● DM503
*Disable MST
DM60 ● DM300 ● DM500 ● DM503
Select Reader as Master
DM60 ● DM300 ● DM500 ● DM503
Deselect Reader as Master
DM60 ● DM300 ● DM500 ● DM503
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 72
Keyboard Country
Keyboard Country
*USA
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
*USA
DM8000Base (DM8000 wireless)
Germany
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
Germany
DM8000Base (DM8000 wireless)
France
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
France
DM8000Base (DM8000 wireless)
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 73
Keyboard Country
Spain
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
Spain
DM8000Base (DM8000 wireless)
Japan
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
Japan
DM8000Base (DM8000 wireless)
Norway
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
Norway
DM8000Base (DM8000 wireless)
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 74
Keyboard Country
Finland
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
Finland
DM8000Base (DM8000 wireless)
Alt Key Combo
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
Alt Key Combo
DM8000Base (DM8000 wireless)
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 75
Alt Key Combo Zero Padding
Alt Key Combo Zero Padding
*Enable Alt Key Combo Zero Padding
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
*Enable Alt Key Combo Zero Padding
DM8000Base (DM8000 wireless)
Disable Alt Key Combo Zero Padding
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
Disable Alt Key Combo Zero Padding
DM8000Base (DM8000 wireless)
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 76
USB Keyboard Inter-Character Delay
USB Keyboard Inter-Character Delay
*100 ms OFF
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
100 ms ON
DMAE50 ● DM50 ● DM100 ● DM700 ● DM8000
*0 ms OFF
DM8000Base
100 ms ON
DM8000Base
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 77
Code Quality Settings
Code Quality Settings
Code Quality On
DM100
*Code Quality Off
DM100
*Enable Bright Field – Diffuse Perpendicular (90)
DM100
Disable Bright Field – Diffuse Perpendicular (90)
DM100
*Enable Dark Field – 30 Degree All Quadrants
(30Q)
DM100
Disable Dark Field – 30 Degree All Quadrants (30Q)
DM100
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 78
Code Quality Settings
*Enable Dark Field – 30 Degree E-W Quadrants
(30T)
DM100
Disable Dark Field – 30 Degree E-W Quadrants
(30T)
DM100
*Enable Dark Field – 30 Degree N-S Quadrants
(30T)
DM100
Disable Dark Field – 30 Degree N-S Quadrants
(30T)
DM100
Enable Custom Light Configuration
DM100
*Disable Custom Light Configuration
DM100
* - default setting
DataMan® Configuration Codes
9/26/2014 | Version 5.4
P a g e | 79