POLYVER SUPER WHITE
SPECIAL PRODUCTS
06
SRI 1
POLYVER SUPER WHITE is a high solar reflectance and thermal emittance
solvent-based white paint with Solar Reflectance Index (SRI) 106, for the
protection of the bitumen polymer membranes.
EN 1504-2
Polyglass is a member of
the Green Building Council
Rev. 1-15
SPECIAL PRODUCTS
TECHNICAL DESCRIPTION
POLYVER SUPER WHITE is a high solar reflectance and thermal emittance white protective solvent-based paint with Solar
Reflectance Index (SRI) 106 for the protection of the bitumen polymer membranes achieved with particular synthetic resins,
fillers, pigments, anti-mold, anti-algae and various additives which create an elastic film able to follow the small deformations or
dilatations.
WHERE TO APPLY
POLYVER SUPER WHITE is specially designed to protect from U.V. rays talc, sand or self protected bitumen polymer membranes,
or unprotected liquid membranes both water or solvent-based, creating a barrier at high reflectance of solar rays guaranteeing a
thermal insulation and energy saving. If applied on bituminous membranes with a photovoltaic system, POLYVER SUPER WHITE
protects not only the waterproofing system, but it also improves the efficiency of the photovoltaic panels. It can also be applied on
concrete, fibrocement, wood and metallic sheets.
POLYVER SUPER WHITE reduces the roof temperature on the surface more than 50% if compared to the dark/black roof surface.
It also reduces the internal temperature of the building and maintains it constant. Thanks to SRI (Solar Reflectance Index) of 106,
using POLYVER SUPER WHITE LEED credits will be obtained for the reduction in the Heat Island Effect.
APPLICATION PROCEDURES AND TIPS
POLYVER SUPER WHITE is ready for use and it must be strongly mixed before application normally achieved by means of
paintbrush, roller, or spray device on dry, clean and free of oil and dust surfaces.
Do not apply POLYVER SUPER WHITE in case of coming rain and after its application. For the application on polymer bitumen
membranes with granules clean the surface with compressed air to remove the surplus granules. Being a solvent-based product,
POLYVER SUPER WHITE must be applied in the open air far from flames or heat sources. Do not use it on newly applied bitumen
polymer membranes, because the natural oil trasmigration present in the compound could compromise a perfect film adhesion.
We recommend to wait at least 6 months on membranes or bituminous products hot applied and 3 months on bituminous products
cold applied. POLYVER SUPER WHITE must be applied in 2 crossed coats; second coat will be applied after the complete
drying of the first and in every case not before 24 hours. The consumption depends on the nature and on the porosity of the
support, however the average consumption of each coat on bitumen polymer membranes with granules is of 350-450 gr/m2; on
bitumen polymer membranes with talc or sand the consumption is of about 200-300 gr/m2 each coat. The product is walkable for
maintenance and renovation. Protective paints for bituminous membranes or concrete structures can have some cracks due to
the linear thermal dilatation of the surfaces. It is recommended for this reason, to renovate surfaces time to time according to the
site of the structure, to the environmental pollution and the surface decay; approximatly every 2-4 years.
PRODUCT CHARACTERISTICS
ASPECT
COLOUR
SPECIFIC WEIGHT AT 20 °C - NORM EN ISO 2811-1
SOLID CONTANTS AT 130 °C - NORM EN ISO 3251
VISCOSITY DIN 4 AT 25 °C - NORM EN ISO 2431
PERMEABILITY TO CO2
PERMEABILITY TO WATER VAPOUR
Liquid
White
1,35 (±0,04) kg/l
65-71%
80-100 seconds
SD >50 m
Class I - SD <5 m
EELab (Energy Efficiency Laboratory)
PRODUCT FOR PROFESSIONAL USE
The figures, information
and suggestions result
from the experience of
POLYGLASS SPA.
Anyone who uses Polyver
Super White must ensure
that the product is suitable for the specific use
and application. In any
case the installer is only
person responsible for
the correct application
and therefore of all consequences arising from said
application.
Please always refer to our
last version of the techncial data sheet on our site:
www.polyglass.com. For
any further information,
please contact our technical office.
POLYGLASS SPA reserves
the right, without notice,
to modify the technical
card according to the
necessity to improve the
product.
w <0,1 Kg/m2 ·h0,5
≥1 N/mm2
60-120 minutes
30-60 minutes
≥23 °C
24 months
SRI SOLAR REFLECTANCE INDEX (6-10 m/s)
R SOLAR REFLECTANCE
E THERMAL EMITTANCE
106
84%
88%
PACKAGING, STORAGE, EQUIPMENT CLEANING
PACKAGING
STORAGE
TOOL CLEANING
Bucket of 20 Kg
Product life perfectly closed, kept in a dry place, far from sun and frost: 24 months
After use clean the tools with common diluents
SAFETY REGULATIONS
POLYVER SUPER WHITE is highly flammable. It is recommended to preserve the product far from flames and sparks, not smoke, avoid the static charges accumulation and work in well ventilated areas. POLYVER SUPER WHITE is toxic for inhalation and it may cause drowsiness or dizziness. Moreover
the continuous contact may cause skin irritation, it may cause lung damages if swallowed. During the application it is recommended to wear gloves and
protective glasses and to follow the usual precautions for the handling of chemical products. In case of contact with eyes or skin, wash immediately with
abundant water and call the doctor. For further and complete information concerning the use of the product, it is recommended to read the last version of
our Security Data Sheet.
POLYGLASS SPA
Registered Office: Viale Jenner, 4 - 20159 MILANO
Head Office: Via dell’Artigianato, 34 - 31047 Ponte di Piave (TV) - Italy
Tel. +39 04227547 - Fax +39 0422854118 - www.polyglass.com - info@polyglass.it
06/15
Rev. 1-15
CAPILLARY ABSORPTION
ADHESION STRENGTH BY PULL OFF
DRYING TIME AT TOUCH
DRYING TIME OUT OF DUST
FLAMMABILITY POINT IN CLOSED BUCKETS
STABILITY IN ORIGINAL CLOSED BUCKETS