Technical documentation Hilti System MQ channel installation hot

advertisement
Technical
documentation
Hilti System MQ
channel installation
hot-dip galvanised /
stainless steel
System MQ channel installation hot-dip galvanised
page 1
System MQ channel installation hot-dip galvanised /stainless steel
Rust ?
No, not with the Hilti rapid installation system.
Extreme convenience during assembly and
a high level of safety characterize Hilti's
proven MQ channel installation system.
This flexible modular system permits
optimized protection against corrosion
combined with the benefits of rapid channel
assembly.
Features of Hilti installation system:
■ Simple selection of the ideal channel for an
application.
■ High strength and stability of a structure.
■ Installation safety and simple working principle
of the system.
■ Easy and accurately positioned fitting of channels
with the single-part, pre-connectable, rapidinstallation pushbutton.
■ Quick and easy connection of various channels
thanks to total system modularity.
As a pioneer of fastening technology, Hilti is committed to continually improving the products through in-house
research and development. An actual example is the MQ system in various materials – hot-dip galvanised,
HDG plus and stainless steel.
Hot-dip galvanised steel or HDG plus quality
A4/A5 stainless steel
Inside
Humid and poorly ventilated rooms,
with occasional effects of
condensation
Frequent or long-lasting effects of
condensation due to high humidity or
temperature fluctuations
Outside
When selecting a suitable system, allowance must be made for the conditions it will be used in. As a guide, the
following general recommendations can be given for selecting the right use of materials and types of protection
against corrosion:
Slightly corrosive
atmosphere
(rural atmosphere)
Corrosive atmosphere
(moderate exposure to chlorides
and sulfur dioxide)
Anchors made of stainless steel are recommended for fastening hot-dip galvanized-, HDG plus- and stainlesssteel components.
Please contact our advisory engineers for further details.
page 2
Hilti System MQ
Channel installation
hot-dip galvanised
HDG plus –
the longer lasting difference
Hilti. Outperform. Outlast.
System MQ channel installation HDG plus
Technical data
Channel selections (HDG plus)
2
Definition of axes
e1
e1
e2
z-axis
MQ-21HDG plus
2.0
165.3
1.48
6
41.2
41.3
41.3
41.3
y-axis
"open"
31
20.6
e2
2
2
F
F
82.6
2
2
MQ-31HDG plus
2.0
204.9
1.80
6
41.3
41.3
41.3
MQ-41HDG plus
2.0
245.1
2.13
6
MQ-21DHDG plus
2.0
330.6
2.98
6
MQ-41DHDG plus
2.0
490.3
4.29
6
Channel wall thickness
t [mm]
Cross-sectional area
A [mm2]
Channel weight
[kg/m]
Delivered length
[m]
Material
Permissible stress
σperm. [N/mm2]
188.3
181.8
175.3
188.3
175.3
Cont. hot-dip galvanised (HDG plus), 쏗70 µm
●
●
●
●
●
Hot-dip galvanised, min. 45 µm
Cross-section values
Y-axis
Axis of gravity "open" 1)
e1 [mm]
10.84
16.01
21.13
20.60
41.30
Axis of gravity
e2 [mm]
9.76
14.99
20.17
20.60
41.30
Moment of inertia
Iy [cm4]
0.92
2.60
5.37
4.98
30.69
Section modulus "open"
Wy1 [cm3]
0.85
1.62
2.54
2.42
7.43
Section modulus
Wy2 [cm3]
0.94
1.73
2.66
2.42
7.43
Radius of gyration
iy [cm]
0.74
1.13
1.48
1.23
2.50
Permissible moment 2)
My [Nm]
159
295
446
455
1303
Z-axis
Moment of inertia
Iz [cm4]
4.39
5.83
7.33
8.78
14.67
Section modulus
Wz [cm3]
2.13
2.82
3.55
4.25
7,10
Radius of gyration
iz [cm]
1.63
1.69
1.73
1.63
1.73
Selection of channel section:
● The given data is based on a single span (simply-supported beam) bearing a single load, F (kN), at mid-span, L/2.
● If several loads are acting on a single span (simply-supported beam), these may be summated and regarded as a single load acting at mid span. By taking this
approach, the design calculation is on the safe side. (➔ Cross section selection table).
● The permissible stress in the steel and the max. deflection, L/200, are not exceeded with the given max. span width, L (cm).
● The channel's own weight was taken into account.
● HDG plus channels: The permissible stress σD / γG/Q where γ = 1.4. σD results from the higher yield strength (point) resulting from cold forming as per
DAST-RILI 016 from 1992: σD = fyk / γM where γM = 1.1
Max. span width, L (cm) / deflection f (mm) 3)
F (kN)
0.25
0.50
0.75
1.00
1.25
1.50
1.75
2.00
2.25
2.50
2.75
3.00
3.50
4.00
4.50
5.00
6.00
7.00
8.00
L
(cm)
f
(mm)
L
(mm)
f
(mm)
L
(cm)
f
(mm)
L
(cm)
f
(mm)
L
(cm)
f
(mm)
133
95
78
63
51
42
36
32
28
25
23
21
18
16
14
12
10
9
7
6,7
4,8
3,9
2,8
1,8
1,2
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
218
159
131
114
94
78
67
59
52
47
43
39
34
29
26
23
19
17
14
10.9
7.9
6.5
5.7
4.0
2.8
2.0
1.6
1.2
1.0
<1
<1
<1
<1
<1
<1
<1
<1
<1
306
226
187
163
141
118
101
89
79
71
65
59
51
44
39
36
30
25
22
15.3
11.3
9.3
8.1
6.6
4.6
3.4
2.6
2.1
1.7
1.4
1.2
<1
<1
<1
<1
<1
<1
<1
288
216
179
156
140
120
103
90
80
72
66
60
–
–
–
–
–
–
–
14.4
10.8
9.0
7.8
7.0
5.3
3.9
3.0
2.4
1.9
1.6
1.3
–
–
–
–
–
–
–
614
496
424
375
340
313
288
254
227
205
187
172
148
129
115
104
87
–
–
30.7
24.8
21.2
18.8
17.0
15.6
14.1
11.0
8.9
7.3
6.1
5.1
3.8
2.9
2.3
1.9
1.3
–
–
Conversion
1 kp
1 kg
1N
1 kN
kp
–
1
0,1
100
Selection example:
● 1.0 kN (≈100 kg) should be carried by a channel with a channel span
width L = 100 cm (single span simply supported).
Solution:
● Select the line showing the load, F = 1.0 kN.
● The MQ-31-HDG plus to MQ-41D-HDG plus channels can be used
because the permissible span width (tabluated value) is larger or
equal to the required span, L = 100 cm.
The smaller value (Wy1, Wy2) is decisive for the calculated bending dimension (Wy1 = Iy/e1 or Wy2 = Iy/e2).
Perm. My = σperm.· min. (Wy1, Wy2)
3)
The channel length is max. 6.0 m. Contact Hilti technical staff about channels longer than 6.0 m!
Single load
kg
1
–
0,1
100
N
10
10
–
1000
kN
0,01
0,01
0,001
–
F[kN]
L/2
L/2
L[cm]
F
1)
2)
page 4
f[mm]
System MQ channel installation hot-dip galvanised
Channel selections (hot-dip galvanised)
2.5
2.75
"open"
z-axis
41.3
41.3
MQ-21-F
41.3
MQ-41-F
MQ-72-F
2.75
41.3
41.3
41.3
MQ-52-F
82.6
2
41.2
20.6
y-axis
52
e2
41.3
e1
e1
2
e2
72
2
2
124
F
F
3
2.5
Definition of axes
124
Technical data
MQ-21D-F
41.3
41.3
MQ-41D-F
MQ52-72D-F
2,5/2.75
844.9
7.26
6
MQ124XD-F
3.0
1237.2
10.09
6
Channel wall thickness
t [mm]
2.0
2.0
2.5
2.75
2.0
2.0
Cross-sectional area
A [mm2]
165.3
245.1
352.1
492.8
330.6
490.3
Channel weight
[kg/m]
1.48
2.13
3.01
4.20
2.97
4.29
Delivered lenght
[m]
3/6
3/6
3/6
3/6
3/6
3/6
Material
Permissible stress
σperm. [N/mm2]
152.6
152.6
152.6
152.6
152.6
152.6
152.6
152.6
Cont. hot-dip galvanised (HDG plus), 쏗 70 µm
Hot-dip galvanised, min. 45 µm
●
●
●
●
●
●
●
●
Cross-section values
Y-axis
Axis of gravity "open" 1)
e1 [mm]
10.84
21.13
26.67
36.79
20.60
41.30
62.02
62.00
Axis of gravity
e2 [mm]
9.76
20.17
25.33
35.22
20.60
41.30
61.99
62.00
Moment of inertia
Iy [cm4]
0.92
5.37
11.41
28.70
4.98
30.69
115.41
188.04
Section modulus "open"
Wy1 [cm3]
0.85
2.54
4.28
7.80
2.42
7.43
18.61
30.33
Section modulus
Wy2 [cm3]
0.94
2.66
4.50
8.15
2.42
7.43
18.62
30.33
Radius of gyration
iy [cm]
0.74
1.48
1.80
2.41
1.23
2.50
3.70
3.90
Permissible moment 2)
My [Nm]
129
388
653
1190
369
1134
2840
4628
Z-axis
Moment of inertia
Iz [cm4]
4.39
7.33
10.79
15.40
8.78
14.67
26.13
31.62
Section modulus
Wz [cm3]
2.13
3.55
5.23
7.46
4.25
7.10
12.65
15.31
Radius of gyration
iz [cm]
1.63
1.73
1.75
1.77
1.63
1.73
1.76
1.60
Selection of channel section:
● The given data is based on a single span (simply-supported beam) bearing a single load, F (kN), at mid-span, L/2.
● If several loads are acting on a single span (simply-supported beam), these may be summated and regarded as a single load acting at mid span. By taking this
approach, the design calculation is on the safe side. (➔ Cross section selection table).
● The permissible stress in the steel and the max. deflection, L/200, are not exceeded with the given max. span width, L (cm).
● The channel's own weight was taken into account.
Max. span width, L (cm) / deflection f (mm) 3)
F (kN)
0.25
0.50
0.75
1.00
1.25
1.50
1.75
2.00
2.25
2.50
2.75
3.00
3.50
4.00
4.50
5.00
6.00
7.00
8.00
L
f
(cm) (mm)
L
(cm)
f
(mm)
L
(cm)
f
(mm)
L
(cm)
f
(mm)
L
(cm)
f
(mm)
L
(cm)
f
(mm)
L
(cm)
f
(mm)
L
(cm)
f
(mm)
133
95
68
51
41
34
29
26
23
20
19
17
15
13
11
10
8
7
6
306 15.3
226 11.3
187 9.3
153 6.8
123 4.4
103 3.1
88 2.3
77 1.7
69 1.4
62 1.1
56 <1
52 <1
44 <1
39 <1
34 <1
31 <1
26 <1
22 <1
19 <1
419
321
268
235
204
171
147
129
115
104
94
87
74
65
58
52
43
37
32
20.9
16.0
13.4
11.7
9.5
6.8
5.0
3.9
3.1
2.5
2.1
1.8
1.3
<1
<1
<1
<1
<1
<1
599
482
411
364
329
303
264
233
208
188
171
157
135
118
105
95
79
68
59
29.9
24.1
20.5
18.2
16.5
15.1
11.7
9.1
7.3
6.0
5.0
4.2
3.1
2.4
1.9
1.5
1.1
<1
<1
288 14.4
216 10.8
179 9.0
145 6.2
116 4.1
97 2.9
84 2.1
73 1.6
65 1.3
59 1.0
53 <1
49 <1
-
614
496
424
375
340
291
252
222
198
179
163
150
129
113
100
90
75
-
30.7
24.8
21.2
18.8
17.0
12.7
9.6
7.5
6.0
4.9
4.1
3.5
2.6
2.0
1.6
1.3
<1
-
936
821
735
670
618
576
541
511
470
428
393
363
315
277
248
224
187
161
141
46.8
41.0
36.8
33.5
30.9
28.8
27.0
25.6
22.2
18.7
15.8
13.6
10.3
8.1
6.5
5.3
3.7
2.8
2.1
1034
938
861
797
745
701
663
630
601
576
554
534
495
439
394
358
301
260
228
51.7
46.9
43.0
39.9
37.2
35.0
33.1
31.5
30.1
28.8
27.7
26.7
24.3
19.4
15.8
13.1
9.4
7.0
5.4
6.7
4.8
2.6
1.5
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
Selection example:
● 1.0 kN (≈100 kg) should be carried by a channel with a channel span
width L = 100 cm (single span simply supported).
Solution:
● Select the line showing the load, F = 1.0 kN.
● The MQ-41-F to MQ-124XD-F channels can be used because the
permissible span width (tabluated value) is larger or equal
to the required span, L = 100 cm.
The smaller value (Wy1, Wy2) is decisive for the calculated bending dimension (Wy1 = Iy/e1 or Wy2 = Iy/e2).
Perm. My = σperm.· min. (Wy1, Wy2)
3)
The channel length is max. 6.0 m. Contact Hilti technical staff about channels longer than 6.0 m!
Single load
Conversion
1 kp
1 kg
1N
1 kN
kp
–
1
0,1
100
kg
1
–
0,1
100
N
10
10
–
1000
kN
0,01
0,01
0,001
–
F[kN]
L/2
L/2
L[cm]
F
1)
2)
f[mm]
page 5
System MQ channel installation HDG plus
Channel selection diagram
(HDG-plus) Single span
(simply supported)
Load, F (kN)
25.00
with single load at mid span, L/2
All values were calculated for a permissible stress of
σperm. (see technical data for channel selection) and a
deflection of L/200.
20.00
15.00
F[kN]
10.00
MQ-41HDG plus
L/2
L/2
5.00 MQ-31HDG plus
L[cm]
MQ-21HDG plus
0.00
0
25
50
100
150
200
250
300
Span width (cm)
200
300
400
500
600
Span width (cm)
Load F (kN)
30.00
25.00
20.00
15.00
10.00
MQ-41D-HDG plus
5.00
MQ-21D-HDG plus
0.00
0 25
100
Channel selection table (HDG plus)
Single span (simply supported)
with single load at mid span, L/2
41.2
31
20.6
41.3
41.3
L/2
41.3
2
F[kN]
82.6
2
2
2
2
41.3
41.3
41.3
L/2
L[cm]
Max. load, F (kN) / deflection, f (mm)
Span width
L (cm)
MQ-21HDG plus
F (kN)
f (mm)
max.
L/200
MQ-31HDG plus
F (kN)
f (mm)
max.
L/200
MQ-41HDG plus
F (kN)
f (mm)
max.
L/200
MQ-21 DHDG plus
F (kN)
f (mm)
max.
L/200
MQ-41 DHDG plus
F (kN)
f (mm)
max.
L/200
25
50
75
100
125
150
175
200
225
275
300
2.53
1.27
0.82
0.45
0.28
0.19
0.14
0.10
0.07
0.04
0.02
4.68
2.35
1.56
1.17
0.82
0.57
0.41
0.31
0.23
0.14
0.11
7.08
3.56
2.37
1.77
1.41
1.17
0.86
0.65
0.51
0.32
0.26
3.00
3.00
2.42
1.81
1.44
1.09
0.79
0.59
0.46
0.28
0.22
6.00
6.00
6.00
5.19
4.14
3.44
2.94
2.56
2.27
1.84
1.64
page 6
<1
1.7
3.8
5.0
6.3
7.5
8.8
10.0
11.3
13.8
15.0
<1
1.1
2.5
4.5
6.3
7.5
8.8
10.0
11.3
13.8
15.0
<1
<1
1.9
3.3
5.2
7.4
8.8
10.0
11.3
13.8
15.0
<1
<1
2.0
3.6
5.7
7.5
8.8
10.0
11.3
13.8
15.0
<1
<1
<1
1.7
2.6
3.8
5.2
6.8
8.6
12.8
15.0
System MQ channel installation hot-dip galvanised
Channel selection diagram
(hot-dip galvanised)
Single span (simply supported)
Load F (kN)
25.00
with single load at mid span, L/2
All values were calculated for a permissible stress of
σperm. (see technical data for channel selection) and a
deflection of L/200.
20.00
MQ-72-F
15.00
F[kN]
MQ-52-F
10.00
L/2
L/2
L[cm]
5.00
MQ-41-F
MQ-21-F
0.00
0
25
50
100
150
200
250
300
Span width (cm)
200
300
400
500
Load F (kN)
30.00
MQ-124X D-F
25.00
20.00
15.00
MQ-52-72D-F
10.00
5.00
MQ-41D-F
MQ-21D-F
0.00
0 25
100
600
Span width (cm)
Channel selection table (hot-dip galvanised)
2.75
2.5
2.5
3
124
82.6
2
41.2
52
41.3
41.3
41.3
L/2
41.3
20.6
F[kN]
2
72
2
2
41.3
41.3
124
Single span (simply supported)
with single load at mid span, L/2
2.75
41.3
41.3
41.3
L/2
L[cm]
Max. load, F (kN) / deflection, f (mm)
MQ-21-F
MQ-41-F
MQ-52-F
MQ-72-F
MQ-21-D-F
MQ-41 D-F
MQ-52-72 D-F
MQ-124 XD-F
Span width
L (cm)
F (kN)
max.
f (mm)
L/200
F (kN)
max.
f (mm)
L/200
F (kN)
max.
f (mm)
L/200
F (kN)
max.
f (mm)
L/200
F (kN)
max.
f (mm)
L/200
F (kN)
max.
f (mm)
L/200
F (kN)
max.
f (mm)
L/200
F (kN)
max.
f (mm)
L/200
25
50
75
100
125
150
175
200
225
275
300
2.05
1.03
0.68
0.45
0.28
0.19
0.14
0.10
0.07
0.04
0.02
<1
1.4
3.1
5.0
6.3
7.5
8.8
10.0
11.3
13.8
15.0
6.16
3.09
2.06
1.54
1.23
1.02
0.86
0.65
0.51
0.32
0.26
<1
<1
1.6
2.9
4.5
6.5
8.8
10.0
11.3
13.8
15.0
10.37
5.21
3.47
2.59
2.07
1.72
1.47
1.28
1.09
0.71
0.58
0.1
0.6
1.3
2.3
3.6
5.1
7.0
9.1
11.3
13.8
15.0
18.93
9.5
6.33
4.74
3.78
3.14
2.68
2.34
2.07
1.68
1.53
<1
<1
<1
1.6
2.6
3.7
5.1
6.6
8.4
12.5
15.0
3.00
2.94
1.96
1.46
1.16
0.96
0.79
0.59
0.46
0.28
0.22
<1
0.7
1.7
2.9
4.6
6.6
8.8
10.0
11.3
13.8
15.0
6.00
6.00
6.00
4.51
3.60
2.99
2.55
2.23
1.97
1.59
1.45
<1
<1
<1
1.5
2.3
3.3
4.5
5.9
7.5
11.2
13.3
11.20
11.20
11.20
11.20
9.04
7.52
6.43
5.61
4.97
4.03
3.68
<1
<1
<1
1.0
1.5
2.2
3.0
3.9
5.0
7.4
8.8
73.63
36.95
24.63
18.46
14.75
12.27
10.49
9.16
8.12
6.60
6.02
<1
<1
<1
1.0
1.5
2.2
3.0
3.9
5.0
7.4
8.8
page 7
System MQ channel installation hot-dip galvanised
Technical data for brackets (hot-dip galvanised)
Type of load 1: uniform
F1 = q · I
Type of load 2: single
F1
F1 [N]
Type of load 3
F1
Type of load 4
F2 F2
1/
2
1/2
1/
3
F1 [N]
F1 [N]
1/
3
Type of load 5
F3 F3 F3
1/ 1/ 1/ 1/
4 4 4 4
1/
3
F2 [N]
F3 [N]
Channel
Bracket
L (mm)
HVZ-R M12
HST-R M12
HVZ-R M12
HST-R M12
HVZ-R M12
HST-R M12
HVZ-R M12
HST-R M12
HVZ-R M12
HST-R M12
MQK-21/300-F
300
850
850
850
850
420
420
420
420
280
280
MQK-21/450-F
450
500
500
560
560
180
180
280
280
180
180
MQK-41/300-F
300
2560
2560
2560
2560
1280
1280
1280
1280
850
850
MQK-41/450-F
450
1710
1710
1710
1710
850
850
850
850
570
570
MQK-41/600-F
600
1270
1270
1270
1270
620
620
630
630
420
420
MQK-41/1000-F
1000
580
580
750
750
210
210
360
360
220
220
MQK-41/600/4-F
600
1270
1270
1270
1270
620
620
630
630
420
420
MQK-41/1000/4-F
1000
580
580
750
750
210
210
360
360
220
220
MQK-72/450-F
450
5260
3180
5260
3180
2630
1590
2630
1590
1750
1060
MQK-72/600-F
600
3930
2380
3930
2380
1970
1190
1960
1190
1310
790
MQK-21 D/300-F
300
2430
2430
2430
2430
1220
1220
1210
1210
810
810
MQK-21 D/450-F
450
1620
1620
1620
1620
810
810
810
810
540
540
MQK-21 D/600-F
600
1210
1210
1210
1210
570
570
600
600
400
400
MQK-41 D/1000-F
1000
2220
1400
2220
1400
1110
700
1110
700
740
460
1)
Loading capacity of the bracket (steel loading capacity) or with HVZ-R M12 fastening, the loading capacity of the bracket is reached with the HVZ-R M12.
2)
Loading capacity of the bracket with HST-R fastening, alternatively, loading values with HIT-RTZ M12 are at least those with HST-R M12.
Load values are for grade C20/25 concrete (≈ B25).
Alternatively, fastening in solid or hollow brick with HIT HY 50 and approval is possible. Use stainless-steel anchor rods (loading values not given in this table).
The bracket’s own weight has been allowed for.
The loads apply only if the bracket is fastened away from a building component edge (fastenings made at component edges must be designed separately).
Separate verification must be provided that forces are transferred to the respective base material, i.e. steel and concrete.
The application guidelines in anchor approvals must be observed. Loading values according to approval status July 2005.
The deflection (deformation) of L/150 was observed in all cases, this being measured at the point of load application.
1)
2)
1)
HVZ-R adhesive anchor
2)
1)
2)
1)
2)
1)
2)
HST-R stud anchor
®
®
Stainless
steel
Stainless
steel
Technical data for brackets with angle brace (hot-dip galvanised)
Type of load 1: uniform
F1 = q · I
Type of load 2: single
1/2
F1
Type of load 3
F1
1/2
Type of load 4
Type of load 5
F2 F2
F3 F3 F3
1/4 1/4 1/4 1/4
1/3
1/3
1/3
Bracket
L (mm)
Brace
F1 [N] 1)
F1 [N] 1)
F1 [N] 1)
F2 [N] 1)
F3 [N] 1)
MQK-21/450 -F
450 short
4420
1140
520
1970
1750
MQK-41/450-F
450 short
6390
3450
2390
3190
2130
MQK-41/600-F
600 long
5540
2580
2840
2510
1890
MQK-41/1000-F
1000 long
2250
3400
430
1700
1130
MQK-41/600/4-F
600 long
5540
2580
2840
2510
1890
MQK-41/1000/4-F 1000 long
2250
3400
430
1700
1130
MQK-72/450-F
450 short
6380
6380
3190
3190
2120
MQK-72/600-F
600 long
5680
5680
2840
2840
1890
MQK-21 D/450-F
450 short
6380
3280
2270
3190
2120
MQK-21 D/600-F
600 long
5260
2450
2840
2390
1870
MQK-41 D/1000-F 1000 long
3380
3380
1690
1690
1120
1)
Loading capacity of the bracket (steel loading capacity) or the loading capacity of the bracket is reached with the HVZ-R, HIT-RTZ or HST-R M12 fastening.
Load values are for grade C20/25 concrete (≈ B25).
Alternatively, fastening in solid or hollow brick with HIT HY 50 and approval is possible. Use stainless-steel anchor rods (loading values not given in this table).
The bracket’s own weight has been allowed for.
The loads apply only if the bracket is fastened away from a building component edge (fastenings made at component edges must be designed separately).
Separate verification must be provided that forces are transferred to the respective base material, i.e. steel and concrete.
The application guidelines in anchor approvals must be observed. Loading values according to approval status July 2005.
The deflection (deformation) of L/150 was observed in all cases, this being measured at the point of load application.
page 8
System MQ channel installation hot-dip galvanised
Installation channels
Features:
■ Serrated C-section.
■ Installation assisted by dimension marking.
■ Great flexibility due to slots.
■ Aesthetic appearance.
■ Swage-joined double channel.
Technical data:
Material:
Hot-dip galvanised single channels and HDG plus channels:
S 235 JR as per DIN EN 10025
Hot-dip galvanised double channels:
S 250 GD as per DIN EN 10 326
Galvanising: HDG plus: continuous hot-dip galvanised with 1000 g/m2
(approx. 쏗 70 µm)
MQ-F: hot-dip galvanised, min. 45 µm
➀
Single channels
HDG plus
➁
100
2
Channel height
(mm)
Length
(m)
Metal thickness
(mm)
Weight
(kg/m)
21
31
41
6
6
6
2
2
2
1.48
1.80
2.13
Ordering
designation
➀ MQ-21-HDG plus 6 m
➁ MQ-31-HDG plus 6 m
➂ MQ-41-HDG plus 6 m
Item no.
304098
284530
304101
100
2
63x13.5
20.6
63x13.5
31
22.3
7.5
22.3
41.3
7.5
41.3
➂
➃
100
2
Hot-dip galvanised
100
2.5
63x13.5
41.3
Channel height
(mm)
Length
(m)
Metal thickness
(mm)
Weight
(kg/m)
21
21
41
41
52
52
72
72
3
6
3
6
3
6
3
6
2
2
2
2
2,5
2,5
2,75
2,75
1.48
1.48
2.13
2.13
3.01
3.01
4.20
4.20
➀
➀
➂
➂
➃
➃
➄
➄
Ordering
designation
Item no.
MQ-21-F 3 m
MQ-21-F 6 m
MQ-41-F 3 m
MQ-41-F 6 m
MQ-52-F 3 m
MQ-52-F 6 m
MQ-72-F 3 m
MQ-72-F 6 m
304096
304097
304099
304100
304102
304103
304104
304105
63x13.5
52
22.3
7.5
22.3
41.3
➄
7.5
41.3
100
2.75
72
63x13.5
22.3
Channels ➃ ➄ firestop tested
7.5
41.3
IBMB no. 3897/1802-5
➀
Double channels
➁➁
75
75
HDG plus
Channel height
(mm)
41
82
Length
(m)
6
6
Metal thickness
(mm)
2
2
Weight
(kg/m)
2.98
4.29
Ordering
designation
➀ MQ-21D-HDG plus 6 m
➁ MQ-41D-HDG plus 6 m
Item no.
41.2
40x13.5
82.6
22.3
284385
304111
40x13.5
7.5
41.3
➂
22.3
75
7.5
41.3
Hot-dip galvanised
2.5
Channel height
(mm)
Length
(m)
Metal thickness
(mm)
Weight
(kg/m)
41
41
82
82
124
124
3
6
3
6
6
6
2
2
2
2
2.5 /2.75
3
2.97
2.97
4.29
4.29
7.26
10.09
➀
➀
➁
➁
➂
➃
Ordering
designation
Item no.
MQ-21D-F 3 m
MQ-21D-F 6 m
MQ-41D-F 3 m
MQ-41D-F 6 m
MQ-52-72D-F 6 m
MQ-124X D-F 6 m
304107
304108
304109
304110
304112
370594
124
40x13.5
2.75
22.3
7.5
41.3
➃
Channels ➁ ➂ ➃ firestop tested
124 3
22.3
IBMB no. 3897/1802-5
7.5
41.3
page 9
System MQ channel installation hot-dip galvanised
Brackets
Features:
■ Serrated C-section.
■ Installation assisted by dimension marking.
■ Great flexibility due to slots.
■ Double-channel brackets welded all around.
Technical data:
Material channel:
Material base plate:
Galvanising:
S 250 GP as per DIN EN 10326
S 235 JR as per DIN EN 10025
hot-dip galvanised, min. 56 µm
➀
Brackets (HDG)
Weight
each (g)
Packaging
contents (pcs)
300
450
300
450
600
1000
600
1000
450
600
300
450
600
1000
MQ-21-F
MQ-21-F
MQ-41-F
MQ-41-F
MQ-41-F
MQ-41-F
MQ-41-F
MQ-41-F
MQ-72-F
MQ-72-F
MQ-21D-F
MQ-21D-F
MQ-21D-F
MQ-41D-F
670
890
950
1260
1570
2400
2540
3370
2510
3130
1250
1720
2190
5080
10
10
10
10
10
10
6
6
6
6
10
10
10
6
➀
➀
➁
➁
➁
➁
➂
➂
➃
➃
➄
➄
➄
➅
Ordering
designation
Item no.
MQK-21/300-F
MQK-21/450-F
MQK-41/300-F
MQK-41/450-F
MQK-41/600-F
MQK-41/1000-F
MQK-41/600/4-F
MQK-41/1000/4-F*
MQK-72/450-F
MQK-72/600-F
MQK-21D/300-F
MQK-21D/450-F
MQK-21D/600-F
MQK-41D/1000-F
304113
304114
304115
304116
304117
304118
304119
304120
304122
304123
304124
304125
304126
304127
8
300; 450; 600; 1000
20x14
20x14
80
80
125
50
➂
50
➃
8
600; 1000
0
15
10
450; 600
20x14
120
23x13
4x
60
145
➄
➅
8
10
1000
300; 450; 600
Brackets ➁ ➂ ➃ ➅ firestop tested
20x14
Bracket ➃ with VdS approval
20x14
80
120
125
VdS
For VdS-approved installation see
www.hilti.com/vds-installation
50
60
IBMB no. 3897/1802-5
Angle brace (HDG)
L
For fabricating wall brackets with individual stand-off lengths.
Angle brace, short
Angle brace, long
74
11
S 235 JR as per DIN EN 10025
4 or 3 mm
H
L
α
Weight
each (g)
Packaging
contents (pcs)
Ordering
desigation
Item no.
A
355
635
328
528
324
524
45°
45°
650
1060
10
10
MQK-SK-F
MQK-SL-F
304129
304128
A
H
(See technical data on page 8).
33
13.5
page 10
165
145
* Available on request
Material:
Material thickness:
125
0
Channel
section
300; 450
15
Channel length
(mm)
➁
6
165
System MQ channel installation hot-dip galvanised
Channel nut
Features:
■ Simple, compact, time saving.
■ Single part which can be prefitted.
■ Easy to use.
■ Universal: one and the same nut for all channels.
Technical data:
Galvanising:
hot-dip galvanised, min. 56 µm
Pushbutton (HDG)
Bolt:
Width across flats:
Nut:
Plate:
M10 material 8.8 as per DIN ISO 898
17 mm
C4C as per DIN EN 10 263
S 235 JR as per DIN EN 10 025
Connection
thread
Weight
each (g)
Packaging
contents (pcs)
Outside packaging
contents (pcs)
Ordering
desigation
Item no.
M10
84
25
200
MQN-F
304130
Item
Rec. tensile load,
Zrec (kN)
Channel I/II
Channel III
MQN-F
Channel I:
Channel II:
Channel III:
Rec. shear load,
Qrec (kN)
Channel I/III
Channel II
5.0
8.0
3.0 1)
4.5 2)
MQ-21-F, MQ-41-F, MQ-21D-F, MQ-41D-F
Tightening torque,
MD (Nm)
IBMB no. 3897/1802-5
40
MQ-21-HDG plus, MQ-31-HDG plus, MQ-41-HDG plus, MQ-21D-HDG plus, MQ-41D-HDG plus
MQ-52-F, MQ-72-F, MQ-52-72D-F, MQ-124XD-F
1)
Shear loading applies to single fastening. Qrec (kN) 5.4 for two fastenings
2)
Shear loading applies to single fastening. Qrec (kN) 8.1 for two fastenings
Wing nut (HDG)
M 6
M 8
M10
M12
Nut M6–M12:
Plastic:
C4C as per DIN EN 10 263
PA
Connection
thread
Weight
each (g)
Packaging
contents (pcs)
Outside packaging
contents (pcs)
Ordering
designation
Item no.
M 6
M 8
M10
M12
40
40
38
36
25
25
25
25
500
500
500
500
MQM-M6-F
MQM-M8-F
MQM-M10-F
MQM-M12-F
304762
304132
304133
304134
Rec. tensile load,
Zrec (kN)
Channel III
Rec. shear load,
Qrec (kN)
(bolt 8.8)
Channel I/III
Channel II
Item
Channel I/II
MQM-M 6-F
MQM-M 8-F
MQM-M10-F
MQM-M12-F
Channel I:
Channel II:
Channel III:
3.0
3.0
–
1.5
5.0
5.0
2.0
3.5
5.0
8.0
3.0
4.5
5.0
8.0
3.0
4.5
MQ-21-F, MQ-41-F, MQ-21D-F, MQ-41D-F
Tightening torque
MD (Nm)
10
20
40
40
MQ-21-HDG plus, MQ-31-HDG plus, MQ-41-HDG plus, MQ-21D-HDG plus, MQ-41D-HDG plus
MQ-52-F, MQ-72-F, MQ-52-72D-F, MQ-124XD-F
page 11
System MQ channel installation hot-dip galvanised
Pipe ring saddle
Features:
■ Single part, simple and time-saving in use.
■ For all types of channels.
■ For threaded roads from M8 to M16.
Technical data:
Galvanising:
hot-dip galvanised, min. 56 µm
MQA-F pipe ring saddle (HDG)
Nut:
Plate:
Plastic:
EN-GJMW-450-7 as per DIN EN 1562
S 235 JR as per DIN EN 10 025
PB
Connection
thread
Weight
each (g)
Packaging
contents (pcs)
Outside packaging
contents (pcs)
M8
M10
M12
M16
75
73
71
82
25
25
25
25
200
200
200
200
Rec. tensile load
Zrec (kN)
Channel I/II
Channel III
Item
MQA-M 8-F
MQA-M10-F
MQA-M12-F
MQA-M16-F
Channel I:
Channel II:
Channel III:
1)
M 8
M10
M12
M16
➀
➁
➁
➁
Ordering
designation
Item no.
MQA-M 8-F
MQA-M10-F
MQA-M12-F
MQA-M16-F
304138
304139
304140
304141
Tightening torque,
MD (Nm)
Bending moment, threaded rod 4.6
(Nm) 1)
3.0
3.0
9
5.0
5.0
18
5.0
8.0
31
5.0
8.0
40
MQ-21-F, MQ-41-F, MQ-21D-F, MQ-41D-F
6.4
12.8
22.4
56.9
MQ-21-HDG plus, MQ-31-HDG plus, MQ-41-HDG plus, MQ-21D-HDG plus, MQ-41D-HDG plus
MQ-52-F, MQ-72-F, MQ-52-72D-F, MQ-124XD-F
Calculation as per DIBt
Pipe ring saddles ➁ firestop tested
IBMB no. 3897/1802-5
M16
1/2"
3/4"
1"
MQG-2-F baseplate (HDG)
Material:
Galvanising:
S 235 JR as per DIN EN 10 025
hot-dip galvanised, 56 µm
Connection
thread
Weight
each (g)
Packaging
contents (pcs)
Ordering
designation
Item no.
M16
1
/2″
3
/4″
1″
180
200
210
220
20
20
20
20
MQG-2-M16-F
MQG-2-1/2″-F
MQG-2-3/4″-F
MQG-2-1″-F
304146
304147
304148
304149
Rec. tensile load,
Zrec (kN)
Item:
MQG-2-M16-F
MQG-2-1/2″-F
MQG-2-3/4″-F
MQG-2-1″-F
Channel I:
Channel II:
Channel III:
page 12
Rec. shear load,
Qrec (kN)
Channel I/III
Channel II
Tightening torque
MD (Nm)
6.0
5.0
8.0
40
6.0
5.0
8.0
40
6.0
5.0
8.0
40
6.0
5.0
8.0
40
MQ-21-F, MQ-41-F, MQ-21D-F, MQ-41D-F
Bending moment,
threaded rod 4.6 (Nm)
56.9
22.4
100.0
193.0
MQ-21-HDG plus, MQ-31-HDG plus, MQ-41-HDG plus, MQ-21D-HDG plus, MQ-41D-HDG plus
MQ-52-F, MQ-72-F, MQ-52-72D-F, MQ-124XD-F
50
155
100
System MQ channel installation hot-dip galvanised
Angles, angle brackets,
connectors
Features:
■ Universal: few parts for all applications.
■ Easy to use.
■ Three-dimensional, thus high strength.
■ The MQN-F pushbutton can be prefitted
Technical data:
Material:
Material thickness:
Galvanising:
19
19.4
35
10
S 235 JR as per DIN EN 10025
4 mm
hot-dip galvanised, min. 56 µm
90 º angle (HDG)
Angle, 2 hole, 90°
Angle, 4 hole, 90°
Angle, 8 hole, 90°
Angle, 3 hole, 90°
Angle, 2 hole, 90°
MQ-F (HDG):
Frec 3.0 kN
➀
Weight
each (g)
Packaging
contents (pcs)
110
220
420
160
160
20
10
10
20
10
Frec
2.4 kN
➀
➁
➂
➃
➄
Ordering
designation
Item no.
MQW-2-F
MQW-4-F
MQW-8/90°-F
MQW-3-F
MQW-P2-F
304171
304174
304175
304172
304177
➁
MQ-F (HDG):
Frec 3.0 kN
Frec
3.0 kN
➂
MQ-F (HDG):
Frec 5.4 kN
Frec
5.0 kN
MQ-HDG plus:
Frec 8.1 kN
Frec
5.0 kN
61
61
55
105
MQ-HDG plus:
Frec 3.0 kN
Frec
➃
MQ-F (HDG):
Frec 5.4 kN
MQ-HDG plus:
Frec 4.5 kN
Frec
2.4 kN
➄
Frec
3.7 kN
46
2.5 kN
61
111
46
MQ-HDG plus:
Frec 6.8 kN
Frec
2.5 kN
45 º angle (HDG)
Angle, 8 hole, 45°
Angle, 3 hole, 45°
Angle, 2 hole, 45° inner
➀
MQ-F (HDG):
Frec 5.4 kN
105
Weight
each (g)
Packaging
contents (pcs)
410
155
354
10
20
10
Frec
5.0 kN
Ordering
designation
Item no.
➀ MQW-8/45°-F
➁ MQW-3/45°-F
➂ MQW-2/45°-F
➁
MQ-F (HDG):
Frec 4.2 kN
304176
304173
304178
➂
Frec
2.5 kN
100
MQ-F (HDG):
Frec 3.0 kN
Frec
1.1 kN
MQ-HDG plus:
Frec 3.0 kN
Frec
1.1 kN
MQ-F (HDG):
Frec 3.0 kN
Frec
3.0 kN
MQ-HDG plus:
Frec 4.5 kN
Frec
3.0 kN
106
45°
45°
45°
56
MQ-HDG plus:
Frec 8.1 kN
Frec
MQ-HDG plus:
Frec 6.3 kN
5.0 kN
Frec
2.5 kN
100
135º angle (HDG)
Angle, 3 hole, 135°
Weight
each (g)
Packaging
contents (pcs)
Ordering
designation
Item no.
210
10
MQW-3/135°-F*
304179
85
45°
* Available on request
55
page 13
System MQ channel installation hot-dip galvanised
➀
Angle bracket (HDG)
110
MQ-F (HDG):
Frec 2.0 kN
Frec
Angle bracket, one brace
Angle bracket, two braces
Weight
each (g)
Packaging
contents (pcs)
460
1180
10
10
Ordering
designation
➀ MQW-S/1-F
➁ MQW-S/2-F
2.0 kN
Item no.
304180
304181
155
MQ-HDG plus:
Frec 2.0 kN
118
Frec
2.0 kN
13.5
MQ-F (HDG):
Frec 2.0 kN
Angle bracket ➃ with VdS approval
Frec
3.0 kN
MQ-F (HDG):
Frec 5.4 kN
Frec
5.0 kN
MQ-HDG plus:
Frec 2.0 kN
Frec
3.0 kN
MQ-HDG plus:
Frec 8.0 kN
Frec
5.0 kN
VdS
For VdS-approved installation see www.hilti.com/vds-installation
➁
198
MQ-F (HDG):
Frec 3.0 kN
Frec
3.0 kN
MQ-HDG plus:
Frec 3.0 kN
198
Frec
3.0 kN
100
13.5
Frec
5.4 kN
MQ-F (HDG):
Frec 5.4 kN
Frec
5.4 kN
MQ-HDG plus:
Frec 4.0 kN
Frec
6.0 kN
MQ-HDG plus:
Frec 8.1 kN
Frec
6.0 kN
MQ-F (HDG):
Frec 4.0 kN
➀
Connector, two dimensional (HDG)
MQ-F (HDG):
Frec 5.4 kN
167
Connector, double, two dimensional
Connector, triple, two dimensional
Weight
each (g)
Packaging
contents (pcs)
446
602
10
10
Ordering
designation
➀ MQV-2/2D-F
➁ MQV-3/2D-F
Item no.
Frec
304150
304152
5.0 kN
112
MQ-HDG plus:
Frec 8.1 kN
Frec
5.0 kN
Frec
5.4 kN
➁
MQ-F (HDG):
Frec 5.4 kN
167
Frec
5.4 kN
112
MQ-HDG plus:
Frec 8.1 kN
➀
Connector, three dimensional (HDG)
Weight
each (g)
Connector, triple, three dimensional
451
Connector, quadruple, three dimensional 770
Packaging
contents (pcs)
10
10
Ordering
designation
➀ MQV-3/3D-F
➁ MQV-4/3D-F
➁
55
Item no.
304153
304154
112
112
➀
Longitudinal channel connector (HDG)
➁
205
205
45
Channel connector, 12 hole
Channel connector, 4 hole, flat
page 14
Weight
each (g)
Packaging
contents (pcs)
583
188
10
10
Ordering
designation
➀ MQV-12-F
➁ MQV-P4-F
55
Item no.
304155
304156
System MQ channel installation hot-dip galvanised
Connector, flat (HDG)
Channel connector, 4 hole, flat T
150
Weight
each (g)
Packaging
contents (pcs)
Ordering
designation
Item no.
196
10
MQV-T-F
304157
95.5
Channel base /
Base material connector
Features:
■ Reliable and easy to use.
■ Connection of channels to any base material.
■ The MQN-F pushbutton can be prefitted.
19
19.4
35
10
Technical data:
Material:
S 235 JR as per DIN EN 10025
Galvanising:
hot-dip galvanised, min. 56 µm
Separate design verification of the fastening on the base material must
be provided.
➀
Base material connector (HDG)
167
MQ-F (HDG):
Frec 5.4 kN
112
Suitable for
channel height
Weight
each (g)
Packaging
contents (pcs)
Ordering
designation
➀
➁
➂
➃
10
20
20
10
Item no.
MQ-41, MQ-21D
MQ-21, MQ-31, MQ-41
MQ-21, MQ-31, MQ-41
MQ-21, MQ-31, MQ-41
451
110
190
290
MQV-2/2D-14-F
MQP-1/1-F
MQP-1/3-F
MQP-2/3-F
304151
304161
304162
304163
Frec
(kN)
Channel
(B)
Bolt
(A)
Pushbutton
Tightening torque
MD (Nm)
5.0
7.8
MQ-41-F
MQ-41-HDG plus
Double
Double
MQN-F
MQN-F
40
40
Frec
MQ-HDG plus:
Frec 8.1 kN
➁
Item
MQV-2/2D-14-F
5.0 kN
112
Frec
5.0 kN
➂
18x12
3x
14x19
59
61
118
80
61
➃
40
60
59
11.5
34
Base material connector 45 º (HDG)
MQ-F (HDG):
Frec 4.2 kN
Suitable for
channel height
Weight
each (g)
Packaging
contents (pcs)
Ordering
designation
Item no.
MQ-21, MQ-31, MQ-41
350
10
MQP-45°-F
304164
Frec
4.2 kN
40x40x4
105
45°
MQ-HDG plus:
Frec 6.3 kN
14
41
Frec
5.0 kN
42
page 15
System MQ channel installation hot-dip galvanised
➀
Channel base (HDG)
A
105
Suitable for
channel height
Weight
each (g)
Packaging
contents (pcs)
MQ-21 – MQ-72
MQ-41D
MQ-52-72D, MQ-124X D
1150
1880
2730
12
8
6
Ordering
designation
➀ MQP-21-72-F
➁ MQP-82-F
➂ MQP-124-F
Item no.
304165
304166
304167
20x14
Frec
6
135
185
80
➁
Item
MQP-21-72-F
MQP-82-F
MQP-124-F
Channel I:
Channel II:
Channel III:
Frec
(kN)
Channel I/III
Bolt
(A)
Pushbutton
A
Tightening torque
MD (Nm)
5.0
8.0
Double
MQN-F
7.5
11.0
Quadruple MQN-F
7.5
11.0
Quadruple MQN-F
MQ-21-F, MQ-41-F, MQ-21D-F, MQ-41D-F
20x14
40
40
40
Frec
8
150
100
200
➂
MQ-21-HDG plus, MQ-31-HDG plus, MQ-41-HDG plus, MQ-21D-HDG plus, MQ-41D-HDG plus
A
Frec
20x14
Channel base 햲 firestop tested
8
200
250
100
IBMB no. 3897/1802-5
Pivot base (HDG)
Suitable for
channel height
Weight
each (g)
Packaging
contents (pcs)
Ordering
designation
Item no.
MQ-21, MQ-31, MQ-41
1055
10
MQP-G-F
304168
152
49
Item
MQP-G-F
Channel I:
Channel II:
page 16
Bolt
(A)
Pushbutton
A
130
MQ-52-F, MQ-72-F, MQ-52-72D-F, MQ-124XD-F
Frec
(kN)
Channel I
A
106
Channel II
Tightening torque
MD (Nm)
75
Channel II
5.0
8.0
Double
MQN-F 40
MQ-21-F, MQ-41-F
MQ-21-HDG plus, MQ-31-HDG plus, MQ-21D-HDG plus, MQ-41-HDG plus
54
75
190
System MQ channel installation hot-dip galvanised
Beam clamp
Features:
■ For connecting installation channels to steel beams without drilling
or welding.
■ The clamp set fits all standard T-beams
(max. clamping thickness ≤ 23 mm).
Technical data:
Galvanising:
hot-dip galvanised, min. 56 µm
➀
MQT-F beam clamp (HDG)
➁
M10
M8
U-bolt:
S 235 JRG-2 as per DIN EN 10025
Claw plate: S 235 JR as per DIN EN 10025
Nut:
M8-M12-8-HDG as per DIN 934
92
92
5
6
60
95
90
Suitable for
channel height
Weight
each (g)
Packing
contents (pcs)
MQ-21, MQ-31, MQ-41, MQ-21D
MQ-41, MQ-52, MQ-72, MQ-41D
MQ-41D, MQ-52-72D, MQ-124X D
500
650
860
10
10
10
Ordering
designation
140
Item no.
➀ MQT-21-41-F 304190
➁ MQT-41-82-F 304191
➂ MQT-82-124-F 304192
➂
M12
8
92
85
178
Tightening torque
MD (Nm)
Beam clamp
Max. rec. load
(kN)
MQT-21-41-F
10
MQT-41-82-F
20
MQT-82-124-F
30
Always use beam clamps in pairs.
Channel loading values must be allowed for.
3.0
4.5
5.0
➀
MQT-C-F beam clamp (HDG)
Clamp:
Bolt:
Suitable for
channel height
m
23 m
ess
ickn
g th
mpin
la
c
.
max
S 275 JR as per DIN EN 10 025
M12-8.8-HDG as per DIN 933
Material
thickness (mm)
MQ-41
10
MQ-41
6
MQ-21, MQ-31, MQ-41 10
➁
M 12
kne
thic
m
3m
ss 2
ping
lam
x. c
ma
M 12
6
Weight
each (g)
Packaging
contents (pcs)
Outside packaging
contents (pcs)
455
170
260
4
10
6
32
80
48
Ordering
designation
Channel 41/41
Item no.
➀ MQT-C21-F 304193
➁ MQT-C22-F 304194
➂ MQT-C23-F 304195
Channel 41/41
63
30
40
➁
40
10
➂
33.5
20
Beam clamp
Tightening torque
MD (Nm)
MQT-C21-F
20
MQT-C22-F
5
MQT-C23-F
40
Always use beam clamps in pairs.
Channel loading values must be allowed for.
Max. rec. load
(kN)
4.5
2.5
2.5
Frec = 0.3 kN
10
40
M 12
page 17
System MQ channel installation hot-dip galvanised
Clamp
Features:
■ Universal: few parts for all applications.
■ Easy to use.
■ The MQN-F pushbutton can be prefitted.
35
Technical data:
Material:
Material thickness:
Galvanising:
19
19.4
10
S 235 JR as per DIN EN 10025
4 mm
hot-dip galvanised, min. 56 µm
➀
Clamps (HDG)
➁
161
161
106
106
Suitable for
channel height
Weight
each (g)
Packaging
contents (pcs)
MQ-21
MQ-31
MQ-41, MQ-21D
MQ-52
MQ-72
MQ-41D, MQ-41, MQ-21D
MQ-52-72D, MQ-124X D
MQ-41, MQ-41D, MQ-21D
MQ-41, MQ-21D
211
220
243
340
380
340
553
295
366
10
10
10
10
10
10
10
10
10
➀
➁
➂
➃
➄
➅
➆
➇
➈
Ordering
designation
Item no.
MQB-21-F
MQB-31-F
MQB-41-F
MQB-52-F
MQB-72-F
MQB-82-F
MQB-124-F
MQB-41×2-F
MQB-G41-F
304182
284531
304183
304184
304185
304186
304187
304188
304189
➂
161
➃
161
106
106
➅
➄
161
161
106
106
➆
➇
203
106
106
161
➈
230
160
page 18
System MQ channel installation hot-dip galvanised
Accessories
Features:
■ Matching items in programme.
Technical data:
Galvanising:
hot-dip galvanised, min. 56 µm
52.5
Boss plate (HDG)
45.5
5
Material: S 235 JR as per DIN EN 10025
Thread
Weight
each (g)
Packaging
contents (pcs)
M 8
M10
M12
M16
92
88
84
80
20
20
20
20
Ordering
designation
MQZ-L9-F
➀ MQZ-L11-F
➀ MQZ-L13-F
➀ MQZ-L17-F
9.5
11.5
13.5
17.5
Item no.
304196
304197
304198
304199
Boss plates ➀ firestop tested
IBMB no. 3897/1802-5
Installation washer (HDG)
28
34.2
Material: S 235 JR as per DIN EN 10025
10.5
Hole diameter
(mm)
Weight
each (g)
Packaging
contents (pcs)
Ordering
designation
Item no.
10,5
30
40
MQZ-U-F
304208
Adaptor (HDG)
Material: 11 SMn 30 as per DIN 10 087
Internal
thread (mm)
External
thread
Width across
flats (mm)
Weight
each (g)
Packaging
contents (pcs)
Ordering
designation
Item no.
M12
M16
1
/2″
3
/4″
1″″
M10
M12
M16
M16
M16
18
19
24
30
36
41
88
110
140
180
25
25
25
25
25
MQZ-A-M12/M10-F
MQZ-A-M16/M12-F
MQZ-A-1/2″/M16-F
MQZ-A-3/4″/M16-F
MQZ-A-1″/M16-F
284386
304763
304203
304204
304205
47.5
M10
M12
M16
16
page 19
System MQ channel installation hot-dip galvanised
➀
Channel tie (HDG)
➁
For accurate use-assembled double channels
Material: S 235 JR as per DIN EN 10025
Channel tie
Locking device
Connection
thread
Width across
flats (mm)
Weight
each (g)
Packaging
contents (pcs)
M8
M10
13
13
23
25
40
40
Ordering
designation
➀ MQZ-SV-F
➁ MQZ-SS-F
Item
Rec. tensile load,
Zrec (kN)
Rec. shear load,
Qrec (kN)
Tightening torque
MD (Nm)
MQZ-SV-F
MQZ-SS-F
1.0
3.0
–
5.0
6
20
Item no.
304206
304207
Made of polypropylene (PP), suitable for all installation channels.
Suitable for
channel height
Weight
each (g)
Packaging
contents (pcs.)
MQ-21, MQ-21D
MQ-31
MQ-41, MQ-41D
2
2
2
50
50
50
Ordering
designation
➀ MQZ-E21
➁ MQZ-E31
➂ MQZ-E41
21
Item no.
370598
369686
369685
➂
41.3
page 20
➁
➀
Channel endcap
31
System MQ channel installation hot-dip galvanised
3D system
Features:
■ Univeral: few parts for all applications
■ For installation of angles or connectors on site.
■ Quick and easy to use.
■ 45° angle and bracing with predetermined bending point.
Technical data:
Material:
Material thickness:
Galvanising:
Bolt:
Width across flates:
Tightening torque:
19
19.4
35
10
➀ + ➂: QStE 380 TM as per SEW 092
➁ + ➃: DD 11 as per DIN EN 10111
3 mm
hot-dip galvanised, min. 45 µm
M10x10-10.9-HDG as per DIN 933
17
40 Nm
➀
3D system (HDG)
Description
Weight
each (g)
Packaging
contents (pcs)
Basic unit
90° angle
45° angle
Brace
214
204
131
75
20
20
16
20
➀
➁
➂
➃
Ordering
designation
Item no.
MQ3D-B-F
MQ3D-W90°-F
MQ3D-W45°-F
MQ3D-A-F
304209
304210
304211
304212
90
21.5
➁ 61
Supported at both ends
Frec = 2.5 kN
Example of application
Frec Qrec MQN-F
with MQ3D-B-F
26
Tension/compression
bracing
F = 2.5 kN
ds
rec
th
te
d
at
bo
➂
en
Variable angle
Su
pp
or
Frec Qrec MQN-F
with MQ3D-B-F
50
45°
Directly on channel:
30
Frec Qrec MQM-M10-F
fastened to channel with
MQZ-L11-F boss plate
M10x20-8.8-HDG hex. screw
MQM-M10-F wing nut
Frec = 2.5 kN
Variable angle
Tension bracing
➃
Frec = 2.5 kN
Frec Qrec MQN-F
with MQ3D-B-F
50
Variable
angle
45°
25
Directly on channel:
Frec Qrec MQM-M10-F
fastened to channel with
MQZ-L11-F boss plate
M10x20-8.8-HDG hex. screw
MQM-M10-F wing nut
Frec = 2.5 kN
Variable
angle
Note:
The preassembled fastening screw must be
replaced with a longer 8.8 grade M10 screw or by
an anchor when the connecting parts (MQ3DW90°-F, MQ3D-W45°-F, MQ3D-A-F) are fitted without other parts from the 3D system. The minimum
thread engagement lengths must be observed.
page 21
Installation accessories hot-dip galvanised
Installation accessories
d
Hexagon-head bolt DIN 933, grade 8.8,
ISO-metric (HDG)
s
e
L
hot-dip galvanised, 45 µm
k
d
L [mm]
e [mm]
k [mm]
s [mm]
Weight each [g]
Packaging contents (pcs)
Ordering designation
Item no.
M 8
M10
M12
M12
M16
25
25
25
30
30
14.38
18.90
21.10
21.10
26.75
5,3
6,4
7,5
7,5
10,0
13
17
19
19
24
14
23
35
38
79
100
100
50
50
25
M8x25-F
M10x25-F
M12x25-F
M12x30-F
M16x30-F
304787
304788
304789
284387
304790
d
s
Hexagon nut DIN 934, grade 8, ISO-metric (HDG)
m
hot-dip galvanised, 45 µm
e
d
e [mm]
k [mm]
s [mm]
Weight each [g]
Packaging contents (pcs)
Ordering designation
Item no.
M 8
M10
M12
M16
M20
14.38
18.90
21.10
26.75
32.95
6.5
8.0
10.0
13.0
16.0
13
17
19
24
30
4
10
15
33
63
100
100
100
50
50
M8-F
M10-F
M12-F
M16-F
M20-F
304764
304765
304766
304767
304768
Round threaded rod coupling, grade 8.8,
ISO-metric (HDG)
D
hot-dip galvanised, 45 µm
M
L
Thread size
Length [mm]
D [mm]
Weight each [g]
Packaging contents (pcs)
Ordering designation
Item no.
M8
M10
M12
M16
25
30
40
50
11
13
16
20
10
17
24
72
50
50
50
20
M8x25-F
M10x30-F
M12x40-F
M16x50-F
304791
304792
304793
304794
DI
Flat washer DIN 125 (HDG)
S
hot-dip galvanised, 45 µm
DA
DA [mm]
DI [mm]
s [mm]
size
Weight each [g]
Packaging contents (pcs)
Ordering designation
Item no.
16
20
24
30
8.4
10.5
13
17
1.6
2.0
2.5
3.0
8
10
12
16
1
3
5
10
100
100
100
100
A8,4-F
A10,5-F
A13-F
A17-F
304769
304770
304771
304772
Threaded rod DIN 267-10, grade 4.6, ISO-metric (HDG)
Type:
rolled thread, hot-dip galvanised, 45 µm
Thread size
Length L [mm]
Weight each [g]
Packaging contents (pcs)
Ordering designation
M10
M12
M12
M16
M16
M20
M20
1000
1000
2000
1000
2000
1000
2000
490
711
1421
1311
2622
2052
4104
25
20
15
10
10
5
1
AM 10-F 1m
AM 12-F 1m
AM 12-F 2m
AM 16-F 1m
AM 16-F 2m
AM 20-F 1m
AM 20-F 2m
L
M
Item no.
304773
304774
304775
304776
304777
304778
304779
Threaded pipe (HDG)
Type:
rolled thread, hot-dip galvanised, 45 µm
M
L
Inch size
Length L [mm]
Weight each [g]
Packaging contents (pcs)
Ordering designation
Item no.
/2″
/4″
1″″
11/4″
1000
1000
1000
1000
1700
2700
3500
4000
10
5
5
5
GR-G 1/2″-F 1m
GR-G 3/4″-F 1m
GR-G 1″″-F 1m
GR-G 11/4″-F 1m
304780
304781
304782
304783
1
3
page 22
Moving components hot-dip galvanised
MRG-F roll connector
Features:
■ For use suspended or standing without conversion
■ Coordinated loading classes suitable for Hilti pipe rings
■ Temperature resistant up to 300°C as no parts are of plastic.
■ Stiffened base plate suitable for MQ channel installation system
■ Slide can not pull out.
Technical data:
Galvanising:
hot-dip galvanised, min. 45 µm
Smooth rolling on coated rollers.
Coefficient of friction: µ0=0.15
Large movement: MRG 2-F up to
80 mm, MRG-D6-F up to 116 mm.
Center mark for setting to zero.
Delivery without nut, washer or bolt
11,5 x 20
MRG 2-F
MRG 2-F roll connector (HDG)
One connection boss
80
Connection boss/
double thread
Frec
(kN)
Max. displacement
axial (mm)
Max. displacement
transverse (mm)
Packaging
contents (pcs)
Ordering
designation
Item no.
M10 / M12
1.5
80
–
5
MRG 2-F
304213
Roll connector MRG 2-R firestop tested
IBMB no. 3897/1802-5
MRG-D6-F double roll connector (HDG)
90
Two connection bosses
Connection boss/
double thread
Frec
(kN)
Max. displacement
axial (mm)
Max. displacement
transverse (mm)
Packaging
contents (pcs)
Ordering
designation
Item no.
M12 / M16
6.0
116
–
5
MRG-D6-F
304214
13,5 x 20
MRG-D6-F
mm mm
58 16
n ± nt 1
ctio e
fle cem
e
la
d
x. isp
ma ax. d
m
159
219
page 23
Fixed points hot-dip galvanised
MFP-L-F light-duty fixed point
Features:
■ Verified loads and technical data.
■ Quick installation using only 2 screws on the pipe ring.
■ Narrow flange makes insulation easy.
■ Close spacing possible.
H
M20
F
Frec
h
s
M20
D
B
b
MFP-L-F with MFP-GP20-F
F
(50 Nm)
MFP-L-F fixed point pipe ring (HDG)
Material:
Surface:
Hexagon bolt:
Tightening torque:
Clamping
range D [mm]
/2″
/4″
1″″
11/4″
11/2″
2″″
1
21–22
25–27
33–35
42–45
47–50
57–61
68–72
21/2″ 75–79
3″″
88–90
3
Connection
boss
Clamping
screw
bxs
[mm]
B
[mm]
h
[mm]
Packaging
contents (pcs)
Max. load
Frec [N]
Axial load at H=150 mm
F [N]
Ordering
designation
Item no.
M20
M20
M20
M20
M20
M20
M20
M20
M20
M10x35
M10x35
M10x35
M10x45
M10x45
M10x45
M12x45
M12x45
M12x45
40x6
40x6
40x6
40x6
40x6
40x6
40x6
40x6
40x6
82
87
96
110
116
130
143
150
162
34
36
40
45
48
53
59
64
70
20
20
20
20
20
20
20
20
20
8000
8000
8000
12000
12000
12000
12000
12000
12000
1000*
1000*
1000*
1500*
1500*
1500*
2000*
2000*
2000*
MFP-L NW15 M20-F
MFP-L NW20 M20-F
MFP-L NW25 M20-F
MFP-L NW32 M20-F
MFP-L NW40 M20-F
MFP-L NW50 M20-F
MFP-L NW68/72 M20-F
MFP-L NW65 M20-F
MFP-L NW80 M20-F
304232
304233
304234
304235
304236
304237
304238
304239
304240
* The loads given apply only in conjunction (at H=150 mm)
with the MFP-GP20-F and HST-R M12x20 (item no.
71540/9)
M20
F
Threaded rod (HDG)
Material threaded rod:
Type:
DIN 267-10, grade 4.6, ISO-metric
rolled thread, hot-dip galvanised, 45 µm
Thread
size
Packaging
contents (pcs)
Ordering
designation
Item no.
M20
M20
5
1
AM20-F 1m
AM20-F 2m
304778
304779
L
M
Base plate (HDG)
∅ 13,5 mm
Material:
Type:
S 235 JR as per DIN EN 10025
hot-dip galvanised, min. 45 µm
Thread
size
Packaging
contents (pcs)
Ordering
designation
Item no.
M20
25
MFP-GP20-F
304251
100 mm
20 mm
150 mm
M20
109 mm
page 24
150 mm
Inch
size
S 235 JR as per DIN EN 10025
hot-dip galvanised, min. 45 µm
grade 8.8-HDG
50 Nm
Fixed points hot-dip galvanised
MFP-F heavy-duty fixed point
M20
MFP-F fixed point pipe ring (HDG)
S
Material:
Galvanising:
Hexagon bolt:
Tightening torque:
S 235 JR as per DIN EN 10025
hot-dip galvanised, min. 45 µm
grade 8.8-HDG
80 Nm
M16
D
B
90 mm
If the force at the fixed point is greater than 10 kN, weld stops on the bracing side of the pipe.
Pipe size
(mm)
(inch)
100
4″
125/127
125
150
5″
6″
193/200
200
244/250
250
8″
Dimensions
D [mm]
B [mm]
Packaging
contents (pcs)
Ordering
designation
Item no.
S [mm]
108-112
110-115
125-127
133-140
158-162
165-169
193-200
219
244-250
267-273
8
8
8
8
8
8
8
8
8
8
231.4
234.6
245.1
262.0
282.5
299.8
322.4
342.8
373.9
397.6
6
6
6
6
6
6
6
6
3
2
MFP-NW 100 M20-F
MFP-4″ M20-F
MFP-NW 125/127 M20-F
MFP-125 M20-F
MFP-NW 150 M20-F
MFP-6″ M20-F
MFP-193/200 M20-F
MFP-NW 200 M20-F
MFP-244/250 M20-F
MFP-NW 250 M20-F
304241
304242
304243
304244
304245
304246
304247
304248
304249
304250
Fixed point support (HDG)
Type:
rolled thread, hot-dip galvanised, 45 µm
Inch
size
Packaging
contents (pcs)
Ordering
designation
5
GR-G 1 / ″-F 1m
1/″
1
4
1
Item no.
4
M
L
304783
Threaded rod (HDG)
Material threaded rod:
Type:
DIN 267-10, grade 4.6, ISO-metric
rolled thread, hot-dip galvanised, 45 µm
Thread
size
Packaging
contents (pcs)
Ordering
designation
Item no.
M16
M16
10
10
AM16-F 1m
AM16-F 2m
304776
304777
M
L
page 25
Fixed points hot-dip galvanised
MFP 1-F fixed point set (HDG)
MFP-NW…-F
hot-dip galvanised, min. 45 µm
up to Frec 3 kN
HST-R M12
Bracing set
Ordering
designation
Packaging
contents (pcs)
Item no.
MFP-F-pip ring as per desired pipe size
MFP-BP 20-F basic set
MFP-AP 1-F bracing set
1
1
304252
304253
1 1/4"-F
MFP-BP 20-F
M 16-F
H
HST-R M16
AM 16-F
M 20-F
Direct
ion of
force
Frec
MFP-AP 1-F
(to top side of pipe)
Hmin = 170 mm
Hmax = 1200 mm
M16-F
(80 Nm)
MFP 1a-F fixed point set (HDG)
MFP-NW…-F
HST-R M12
hot-dip galvanised, min. 45 µm
up to Frec 3 kN without bracing
Ordering
designation
Packaging
contents (pcs)
Frec [kN]
MFP-F pipe ring as per desired pipe size
MFP-BP 20-F basic set
Item no.
1 1/4"-F
H
1
MFP-BP 20-F
304252
M20-F
4
Frec
2
(to top side of pipe)
Hmin = 140 mm
Hmax = 800 mm
800
700
600
500
400
300
200
140
0
M16-F
(80 Nm)
Support height H [mm]
MFP 2-F fixed point set (HDG)
MFP-NW…-F
(international version)
HST-R M12
hot-dip galvanised, min. 45 µm
up to Frec 10 kN
Ordering
designation
MFP-F pipe ring as per desired pipe size
MFP-BP 20-F basic set
MFP-AP 2-F bracing set
M 16-F
H
Packaging
contents (pcs)
Item no.
HST-R M16
1 1/4"-F
MFP-BP 20-F
AM 16-F
M 20-F
Direct
1
1
ion of
force
Frec
304252
376022
M 16-F
(80 Nm)
MFP-AP 2-F
(to top side of pipe)
Hmin = 140 mm
Hmax = 1200 mm
MFP 3-F fixed point set (HDG)
(inter-
MFP-NW…-F
HST-R M12
national version)
hot-dip galvanised, min. 45 µm
up to Frec 20 kN
Ordering
designation
MFP-F pipe ring as per desired pipe size
MFP-BP16-F basic set
MFP-AP 3-F bracing set
114"-F
Packaging
contents (pcs)
Item no.
H
MFP-BP 16-F
AM16-F
Direct
1
1
304255
304257
Given loads only apply if Hilti HST-R anchors are used.
If the direction of force is not known, or changing, the fixed point must be
braced on both sides.
If the force at the fixed point is greater than 10 kN, weld stops on the
bracing side of the pipe
page 26
HST-R M20
ion of
force
Frec
Height adjustment
sleeve
(with check bore)
M16-F
(80 Nm)
(to pipe centreline)
Hmin = 140 mm
Hmax = 1200 mm
MFP-AP 3-F
Fixed points hot-dip galvanised
MFP 2D-F fixed point set (HDG)
MFP-NW…-F
(German version, depending on anchor approval)
HST-R M12
M 16-F
hot-dip galvanised, min. 45 µm
up to Frec 10 kN
Ordering
designation
MFP-F pipe ring as per desired pipe size
MFP-BP 20-F basic set
MFP-AP 2D-F bracing set
H
Packaging
contents (pcs)
Item no.
HST-R M20
1 1/4"-F
MFP-BP 20-F
AM 16-F
M 20-F
Direct
1
1
ion of
force
Frec
304252
304254
M 16-F
(80 Nm)
MFP-AP 2D-F
(to top side of pipe)
Hmin = 140 mm
Hmax = 1200 mm
MFP 3D-F fixed point set (HDG)
MFP-NW…-F
(German version, depending on anchor approval)
HST-R M12
hot-dip galvanised, min. 45 µm
up to Frec 20 kN
Ordering
designation
MFP-F pipe ring as per desired pipe size
MFP-BP16-F basic set
MFP-AP 4-F bracing set
114"-F
Packaging
contents (pcs)
Item no.
HST-R M20
H
MFP-BP 16-F
AM16-F
Direct
1
1
304255
304256
Given loads only apply if Hilti HST-R anchors are used.
If the direction of force is not known, or changing, the fixed point must be
braced on both sides.
If the force at the fixed point is greater than 10 kN, weld stops on the
bracing side of the pipe.
ion of
force
Frec
Height adjustment
sleeve
(with check bore)
M16-F
(80 Nm)
MFP-AP 4-F
(to pipe centreline)
Hmin = 250 mm
Hmax = 1200 mm
page 27
Pipe rings hot-dip galvanised
MP-MI/-M hot-dip galvanized
For installations exposed to moderate corrosiveness
Use:
■ In humid inside rooms (moderate condensation)
■ Outside in medium-corrosive surroundings
Benefits:
■ Solid welded-on connection boss.
■ Pipe ring hoops swaged for greater stiffness.
■ Clamping screws secured against loss
■ Good resistance to corrosion (HDG 45 µm).
Technical data:
Max. static load recommended for suspensions:
MP-MI-F / -M-F 1/2″ up to 3″ diameter
Frec = 3000N
Pipe ring material:
S 235 JR steel as per DIN EN 10025
Galvanising:
45 µm
Clamping screws:
M8 with combination
socket and separate nut
Rubber inlay material:
EPDM
Temperature resistance:
–50° C to + 120° C
Shore A hardness ( DIN 53 505)
50° ± 5°
Noise reduction:
LA = 18 dB (A)
Stability:
aging, ozone, weather
and hot water
b1
s
SW 17
Acoustic
insulation
for DIN 4109
inspected
Building
material class
B2
„Normal flammability“
as per DIN 4102
Firestop
M10
h
10
D
B
b
MP-MI-F (HDG)
Hot-dip galvanised pipe ring with metric connection boss and insulating inlay as per DIN 4109
Size
[mm/inch]
/2″
/4″
1″
1 1/4″
1 1/2″
54/57
2″
68/72
2 1/2″
78/84
3″
1
3
Clamping
range
D (mm)
Connection thread/
width across flats
Clamping
bolts
Dimensions
B [mm]
bxs [mm] h [mm]
Packaging
contents (pcs)
Ordering
designation
Item no.
b1 [mm]
20-25
25-30
32-38
40-45
48-54
54-57
57-64
68-72
70-77
78-84
82-90
M10/SW17
M10/SW17
M10/SW17
M10/SW17
M10/SW17
M10/SW17
M10/SW17
M10/SW17
M10/SW17
M10/SW17
M10/SW17
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
69
75
83
92
101
107
111
123
130
139
144
21
21
21
21
21
21
21
21
21
21
21
25
25
25
25
25
10
10
10
10
10
10
MP-MI-F 1/2″ M10
MP-MI-F 3/4″ M10
MP-MI-F
1″″ M10
MP-MI-F 11/4″ M10
MP-MI-F 11/2″ M10
MP-MI-F 54/57 M10
MP-MI-F
2″″ M10
MP-MI-F 68/72 M10
MP-MI-F 21/2″ M10
MP-MI-F 78/84 M10
MP-MI-F
3″″ M10
304258
304259
304260
304261
304262
304263
304264
304265
304266
304267
304268
24x2
24x2
24x2
24x2
24x2
24x2
24x2
24x2
24x2
24x2
24x2
28
30
34
38
42
47
48
54
51
58
57
MP-M-F (HDG)
Hot-dip galvanised pipe ring with metric connection boss without insulating inlay
Size
[mm/inch]
/2″
/4″
1″
11/4″
11/2″
54/57
2″
68/72
21/2″
3″
1
3
page 28
Clamping
range
D (mm)
Connection thread/
width across flats
Clamping
bolts
Dimensions
B [mm]
bxs [mm] h [mm]
Packaging
contents (pcs)
Ordering
designation
Item no.
b1 [mm]
20-25
25-30
32-38
40-45
48-54
54-57
57-64
68-72
70-77
82-90
M10/SW17
M10/SW17
M10/SW17
M10/SW17
M10/SW17
M10/SW17
M10/SW17
M10/SW17
M10/SW17
M10/SW17
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
69
75
83
92
101
107
111
123
130
144
21
21
21
21
21
21
21
21
21
21
25
25
25
25
25
10
10
10
10
10
1
MP-M-F
/2″ M10
3
MP-M-F
/4″ M10
MP-M-F
1″″ M10
MP-M-F 11/4″ M10
MP-M-F 11/2″ M10
MP-M-F 54/57 M10
MP-M-F
2″″ M10
MP-M-F 68/72 M10
MP-M-F 21/2″ M10
MP-M-F
3″″ M10
304269
304270
304271
304272
304273
304274
304275
304276
304277
304278
24x2
24x2
24x2
24x2
24x2
24x2
24x2
24x2
24x2
24x2
25
28
32
35
39
44
45
51
50
55
Pipe rings hot-dip galvanised
MP-MXI-F pipe ring
for „extra“ heavy duty installations exposed to moderate corrosiveness
Fields of applications:
■ Industrial pipe fitting
■ Mechanical installations
■ Process and control lines
■ heavy-duty pipe runs
Benefits:
■ Solid connection boss, welded all round
■ Strong clamping bolts for high loads
■ Non-slip, pre-fitted profiled rubber inlay
■ Suitable for the installation of pipes under dynamic loading if used
with vibration damping components.
s
Building
material class
Acoustic
insulation
erv
eS
nc
„Normal flammability“
as per DIN 4102
inspected
ice
B2
for DIN 4109
De
fe
Technical data:
Max permissible load for suspensions:
up to 3″
max. Frec = 6000 N
from 4″ up to 274 mm diameter
max. Frec = 10000 N
from 324 up to 406 mm diameter
max. Frec = 15000 N
from 457 up to 508 mm diameter
max. Frec = 17000 N
Pipe ring material:
STW 22 steel as per DIN EN 10111 (HDG 45 µm)
Rubber inlay material:
EPDM
Temperature resistance:
–50°C to +120°C
Shore A hardness:
50° ± 5° Shore-A
Noise reduction:
Δ LA = 16 dB (A)
SHOCK
TESTED
AC Laboratory, Spiez
Firestop
Recommended guide values for dynamic loading
of MP-MXI-F/MP-MX-F
M16 connection boss,
(max. Frec 6000 N)
from pipe size 4″ (108 mm) up to 274 mm
3
/4″ connection boss,
(max. Frec 10000 N)
from pipe size 2″ (60 mm) up to 133 mm
1″ connection boss,
(max. Frec 10000 N)
from pipe size 5″ (137 mm) up to 274 mm
δ
mm
δ
mm
δ
mm
L
L
L
L
L
L
100 mm 200 mm 300 mm 400 mm 500 mm 1000 mm
0.5 ●
●
●
●
●
●
1
–
●
●
●
●
●
1.5 –
●
●
●
●
●
2
–
●
●
●
●
●
4
–
–
●
●
●
●
6* –
–
–
–
●* ●
8
–
–
–
–
●
●
10
–
–
–
–
●
The determined values apply only if the
MFP-GP16-F base plate and M16 threaded
rod of the 8.8 grade are used.
L
L
L
L
L
L
100 mm 200 mm 300 mm 400 mm 500 mm 1000 mm
0.5 ●
●
●
●
●
●
1
–
●
●
●
●
●
1.5 –
●
●
●
●
●
2
–
–
●
●
●
●
4
–
–
–
●
●
●
6
–
–
–
–
●
●
8
–
–
–
–
●
●
10
–
–
–
–
–
●
The determined values apply only if the
MFP-GP 3/4″-F base plate and GR-G 3/4″-F
threaded pipe are used.
L
L
L
L
L
L
100 mm 200 mm 300 mm 400 mm 500 mm 1000 mm
0.5 ●
●
●
●
●
●
1
–
●
●
●
●
●
1.5 –
●
●
●
●
●
2
–
–
●
●
●
●
4
–
–
–
●
●
●
6
–
–
–
–
●
●
8
–
–
–
–
●
●
10
–
–
–
–
●
The determined values apply only if the
MFP-GP1″-F base plate and GR-G1″-F
threaded pipe are used.
● Fatigue strength (2×106 load cycles) as per the S-N curve.
L
* Example: Is the shown pipe fastening resistant to dynamic fatigue stressing?
Demand:
Known: Threaded base plate with M16 connection and anchor approved for
tension zone. Distance between and ceiling or wall, L, 1500 mm.
Max. side movement caused by vibration, δ, in mm = 6 mm.
Result:
Resistant to fatigue stressing (2×106 load cycles) allowing for dimension
L = min. 500 mm.
page 29
Pipe rings hot-dip galvanised
MP-MXI-F (HDG)
Pipe ring with metric connection boss and insulating inlay as per DIN 4109
M16
M10/M12
S
23
20
h
M 10
B
b
Size
[mm/inch]
Clamping range
d [mm]
Connection
thread
Clamping
bolts
Dimensions
B [mm] s×b [mm] h [mm]
Packaging
contents (pcs)
Ordering
designation
2″
21/2″
3″
4″
125
133
5″
159
6″
177,8
193,7
210
219
244,5
267/274
275
324
326
355
368
406
457
508
60– 65
73– 78
88– 93
108–116
122–126
131–137
139–144
159–166
163–170
177–182
192–200
210–218
219–228
244–253
267–274
275–282
315–324
325–330
348–356
364–372
400–409
454–462
500–508
M10/M12
M10/M12
M10/M12
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M10
M10
M10
M12
M12
M12
M12
M12
M12
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
142
156
172
210
221
231
238
261
265
284
303
321
330
355
375
384
441
445
471
488
525
586
632
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
10
1
1
1
1
1
1
1
MP-MXI-F 2″
MP-MXI-F 21/2″
MP-MXI-F 3″
MP-MXI-F 4″
MP-MXI-F 125
MP-MXI-F 133
MP-MXI-F 5″
MP-MXI-F 159
MP-MXI-F 6″
MP-MXI-F 177,8
MP-MXI-F 193,7
MP-MXI-F 210
MP-MXI-F 219
MP-MXI-F 244,5
MP-MXI-F 267/274
MP-MXI-F 275
MP-MXI-F 324
MP-MXI-F 326
MP-MXI-F 355
MP-MXI-F 368
MP-MXI-F 406
MP-MXI-F 457
MP-MXI-F 508
3×30
3×30
3×30
4×40
4×40
4×40
4×40
4×40
4×40
4×40
4×40
4×40
4×40
4×40
4×40
4×40
5×50
5×50
5×50
5×50
5×50
6×70
6×70
64
71
78
90
95
100
104
115
117
123
132
141
146
158
167
173
190
192
205
213
232
259
282
Item no.
M10/M12
M10/M12
M10/M12
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
374897
374898
374899
374900
374901
374902
374903
374904
374905
374906
374907
374908
374909
374910
374911
374912
374913
374914
374915
374916
374917
374918
374919
MP-MX-F (HDG)
Pipe ring with metric connection boss without insulating inlay
h
M16
M10/M12
M 10
23
20
S
B
Size
[mm/inch]
Clamping range
d [mm]
2″
60– 65
73– 78
21/2″
3″
88– 93
4″
108–116
125
122–128
133
132–138
5″
139–144
159
159–166
6″
163–170
177,8
177–182
193,7
192–200
210
210–218
219
219–228
244,5
244–253
267/274
267–274
275
275–282
324
315–324
326
325–330
355
348–356
368
364–372
406
400–409
457
454–462
508
500–508
* Available on request
page 30
Connection
thread
Clamping
bolts
Dimensions
B [mm] s×b [mm] h [mm]
Packaging
contents (pcs)
Ordering
designation
M10/M12
M10/M12
M10/M12
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M10
M10
M10
M12
M12
M12
M12
M12
M12
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
132
146
161
198
210
221
226
249
253
272
290
309
318
343
363
372
429
433
460
476
514
574
620
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
10
1
1
1
1
1
1
1
MP-MX-F 2″
MP-MX-F 21/2″
MP-MX-F 3″
MP-MX-F 4″
MP-MX-F 125
MP-MX-F 133
MP-MX-F 5″
MP-MX-F 159
MP-MX-F 6″
MP-MX-F 177,8
MP-MX-F 193,7
MP-MX-F 210
MP-MX-F 219
MP-MX-F 244,5
MP-MX-F 267/274
MP-MX-F 275
MP-MX-F 324
MP-MX-F 326
MP-MX-F 355
MP-MX-F 368
MP-MX-F 406
MP-MX-F 457
MP-MX-F 508
3×30
3×30
3×30
4×40
4×40
4×40
4×40
4×40
4×40
4×40
4×40
4×40
4×40
4×40
4×40
4×40
5×50
5×50
5×50
5×50
5×50
6×70
6×70
60
67
74
84
89
94
98
109
111
117
126
135
140
152
162
167
184
186
199
207
226
253
276
Item no.
M10/M12*
M10/M12*
M10/M12*
M16*
M16*
M16*
M16*
M16*
M16*
M16*
M16*
M16*
M16*
M16*
M16*
M16*
M16*
M16*
M16*
M16*
M16*
M16*
M16*
374943
374944
374945
374946
374947
374948
374949
374950
374951
374952
374953
374954
374955
374956
374957
374958
374959
374960
374961
374962
374963
374964
374965
Pipe rings hot-dip galvanised
MP-MXI-F (HDG)
Pipe ring with inch connection boss and insulating inlay as per DIN 4109
1"
3/4"
25
20
h
S
B
b
Size
[mm/inch]
Clamping range
d [mm]
2″
60– 65
73– 78
21/2″
3″
88– 93
4″
108–116
125
122–126
133
131–137
5″
139–144
159
159–166
6″
163–170
177,8
177–182
193,7
192–200
210
210–218
219
219–228
244,5
244–253
267/274
267–274
275
275–282
324
315–324
326
325–330
355
348–356
368
364–372
406
400–409
457
454–462
508
500–508
* Available on request
Connection
thread
/4″
/4″
3
/4″
3
/4″
3
/4″
3
/4″
1″
1″
1″
1″
1″
1″
1″
1″
1″
1″
1″
1″
1″
1″
1″
1″
1″
3
3
Clamping
bolts
M10
M10
M10
M12
M12
M12
M12
M12
M12
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
Dimensions
B [mm] s×b [mm] h [mm]
142
156
172
210
221
231
238
261
265
284
303
321
330
355
375
384
441
445
471
488
525
586
632
3×30
3×30
3×30
4×40
4×40
4×40
4×40
4×40
4×40
4×40
4×40
4×40
4×40
4×40
4×40
4×40
5×50
5×50
5×50
5×50
5×50
6×70
6×70
64
71
78
90
95
100
104
115
117
123
132
141
146
158
167
173
190
192
205
213
232
259
282
Packaging
contents (pcs)
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
10
1
1
1
1
1
1
1
Ordering
designation
Item no.
MP-MXI-F 2″
MP-MXI-F 21/2″
MP-MXI-F 3″
MP-MXI-F 4″
MP-MXI-F 125
MP-MXI-F 133
MP-MXI-F 5″
MP-MXI-F 159
MP-MXI-F 6″
MP-MXI-F 177,8
MP-MXI-F 193,7
MP-MXI-F 210
MP-MXI-F 219
MP-MXI-F 244,5
MP-MXI-F 267/274
MP-MXI-F 275
MP-MXI-F 324
MP-MXI-F 326
MP-MXI-F 355
MP-MXI-F 368
MP-MXI-F 406
MP-MXI-F 457
MP-MXI-F 508
/4″*
/4″*
3
/4″*
3
/4″*
3
/4″*
3
/4″*
1″*
1″*
1″*
1″*
1″*
1″*
1″*
1″*
1″*
1″*
1″*
1″*
1″*
1″*
1″*
1″*
1″*
3
374920
374921
374922
374923
374924
374925
374926
374927
374928
374929
374930
374931
374932
374933
374934
374935
374936
374937
374938
374939
374940
374941
374942
3
MP-MX-F (HDG)
Pipe ring with inch connection boss without insulating inlay
1"
25
S
20
3/4"
h
B
Size
[mm/inch]
Clamping range
d [mm]
2″
60– 65
21/2″
73– 78
3″
88– 93
4″
108–116
125
122–128
133
132–138
5″
139–144
159
159–166
6″
163–170
177,8
177–182
193,7
192–200
210
210–218
219
219–228
244,5
244–253
267/274
267–274
275
275–282
324
315–324
326
325–330
355
348–356
368
364–372
406
400–409
457
454–462
508
500–508
* Available on request
Connection
thread
/4″
/4″
3
/4″
3
/4″
3
/4″
3
/4″
1″
1″
1″
1″
1″
1″
1″
1″
1″
1″
1″
1″
1″
1″
1″
1″
1″
3
3
Clamping
bolts
M10
M10
M10
M12
M12
M12
M12
M12
M12
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
Dimensions
B [mm] s×b [mm] h [mm]
132
146
161
198
210
221
226
249
253
272
290
309
318
343
363
372
429
433
460
476
514
574
620
3×30
3×30
3×30
4×40
4×40
4×40
4×40
4×40
4×40
4×40
4×40
4×40
4×40
4×40
4×40
4×40
5×50
5×50
5×50
5×50
5×50
6×70
6×70
60
67
74
84
89
94
98
109
111
117
126
135
140
152
162
167
184
186
199
207
226
253
276
Packaging
contents (pcs)
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
10
1
1
1
1
1
1
1
Ordering
designation
MP-MX-F 2″
MP-MX-F 21/2″
MP-MX-F 3″
MP-MX-F 4″
MP-MX-F 125
MP-MX-F 133
MP-MX-F 5″
MP-MX-F 159
MP-MX-F 6″
MP-MX-F 177,8
MP-MX-F 193,7
MP-MX-F 210
MP-MX-F 219
MP-MX-F 244,5
MP-MX-F 267/274
MP-MX-F 275
MP-MX-F 324
MP-MX-F 326
MP-MX-F 355
MP-MX-F 368
MP-MX-F 406
MP-MX-F 457
MP-MX-F 508
Item no.
/4″*
/4″*
3
/4″*
3
/4″*
3
/4″*
3
/4″*
1″*
1″*
1″*
1″*
1″*
1″*
1″*
1″*
1″*
1″*
1″*
1″*
1″*
1″*
1″*
1″*
1″*
3
3
374966
374967
374968
374969
374970
374971
374972
374973
374974
374975
374976
374977
374978
374979
374980
374981
374982
374983
374984
374985
374986
374987
374988
page 31
Pipe rings hot-dip galvanised
Pipe rings accessories
d
Base plate MGS 2-1⁄2"-F (HDG)
4
H
Material:
Type:
S235 JRG2C
hot-dip galvanised, min. 45 µm
d
[Inch]
H
[mm]
Fz rec
[kN]
Packaging
contents (pcs)
Ordering
designation
Item no.
19
5.0
10
MGS 2-1⁄2-F
202842
⁄2"
1
11 x 18
40
85
120
The means of fastening to the base material, e.g. anchors, requires separate verification.
Base plate MGM 2-F (fvz)
d
axb
Material:
Type:
S235 JRG2C
hot-dip galvanised, min. 45 µm
d
[mm /Inch]
H
[mm]
axb
[mm]
Fz rec
[kN]
Packaging
contents (pcs)
Ordering
designation
Item no.
M16"
3
⁄4"
1"
20
21
25
13x18
13x18
13x18
8.2
8.2
8.2
10
10
10
MGM 2-16-F
MGM 2-3⁄4"-F
MGM 2-1"-F
202839
202840
202841
4
H
120
85
40
The means of fastening to the base material, e.g. anchors, requires separate verification.
d
H
Base plate MFP-GP 16-F (HDG)
Material:
Type:
∅a
S 235 JR as per DIN EN 10025
hot-dip galvanised, min. 45 µm
Connection
boss
d
Dimensions
H
a
[mm]
[mm]
Max. load
Frec
[kN]
Shear load for
(A = 150 mm)
[kN]
Packaging
contents (pcs)
Ordering
designation
Item no.
M16
20
15.0
2.0
25
MFP-GP 16-F
304279
13.5
109
150
100
The means of fastening to the base material, e.g. anchors, requires separate verification.
Threaded pipe GR-G-F (HDG)
Type:
rolled thread, hot-dip galvanised, 45 µm
Inch
size
Length
L [mm]
Packaging
contents (pcs)
Ordering
designation
Item no.
/4″
1″
1000
1000
5
5
GR-G 3/4″-F 1 m
GR-G 1″-F 1 m
304781
304782
3
M
L
3/4"
1"
Adaptor MQZ-A-F (HDG)
Suitable for MP-MXI-F / MP-MX-F pipe rings with M16 connection
and MFP-GP 16-F base plate
Type:
hot-dip galvanised, 45 µm
Internal
thread
External
thread
Width across
flats [mm]
Weight
each (g)
Packaging
contents (pcs)
Ordering
designation
Item no.
/4″
1″″
M16
M16
30
36
140
180
25
25
MQZ-A-3/4″/M16-F
MQZ-A-1″/M16-F
304204
304205
3
page 32
47.5
M16
16
Hilti System MQ
Schienenmontage System MQ Edelstahl
Channel installation
stainless steel
No more rusting !
Hilti. Outperform. Outlast.
page 33
System MQ channel installation stainless steel
Channel sections (stainless steel)
2.5
Technical data
e1
e1
e2
52
41.3
41.3
41.3
y-axis
82.6
41.2
20.6
F
F
41.3
2
2
e2
"open"
2
2
Definition of axes
41.3
41.3
z-axis
MQ-21-RA2
MQ-21-R
MQ-41-RA2
MQ-41-R
MQ-52-R MQ-21D-RA2 MQ-21D-R
MQ-41D-R
Channel wall thickness
t [mm]
2.0
2.0
2.0
2.0
2.5
2.0
2.0
2.0
Cross-sectional area
A [mm2]
165.3
165.3
245.1
245.1
352.1
330.6
330.6
490.3
Channel weight
[kg/m]
1.45
1.47
2.09
2.12
3.00
2.92
2.96
4.27
Delivered length
[m]
3/6
3/6
3/6
3/6
3/6
3/6
3/6
3/6
Material
Permissible stress
σperm. [N/mm2]
142.9
155.8
142.9
155.8
155.8
142.9
155.8
155.8
Stainless steel A2 (1.4301)
●
●
●
Stainless steel A5 (1.4571)
●
●
●
●
●
Cross-section values
Y-axis
Axis of gravity "open" 1)
e1 [mm]
10.84
10.84
21.13
21.13
26.67
20.60
20.60
41.30
Axis of gravity
e2 [mm]
9.76
9.76
20.17
20.17
25.33
20.60
20.60
41.30
Moment of inertia
Iy [cm4]
0.92
0.92
5.37
5.37
11.41
4.98
4.98
30.69
Section modulus "open"
Wy1 [cm3]
0.85
0.85
2.54
2.54
4.28
2.42
2.42
7.43
Section modulus
Wy2 [cm3]
0.94
0.94
2.66
2.66
4.50
2.42
2.42
7.43
Radius of gyration
iy [cm]
0.74
0.74
1.48
1.48
1.80
1.23
1.23
2.50
Permissible moment 2)
My [Nm]
121
132
363
396
666
346
377
1158
Z-axis
Moment of inertia
Iz [cm4]
4.39
4.39
7.33
7.33
10.79
8.78
8.78
14.67
Section modulus
Wz [cm3]
2.13
2.13
3.55
3.55
5.23
4.25
4.25
7.10
Radius of gyration
iz [cm]
1.63
1.63
1.73
1.73
1.75
1.63
1.63
1.73
Selection of channel section:
● The given data is based on a single span (simply-supported beam) bearing a single load, F (kN), at mid-span, L/2.
● If several loads are acting on a single span (simply-supported beam), these may be summated and regarded as a single load acting at mid span. By taking this
approach, the design calculation is on the safe side. (➔ Cross section selection table).
● The permissible stress in the steel and the max. deflection, L/200, are not exceeded with the given max. span width, L (cm).
● The channel's own weight was taken into account.
Max. span width, L (cm) / deflection, f (mm) 3)
F (kN)
0.25
0.50
0.75
1.00
1.25
1.50
1.75
2.00
2.25
2.50
2.75
3.00
3.50
4.00
4.50
5.00
6.00
7.00
8.00
L
(cm)
f
(mm)
L
(cm)
f
(mm)
L
(cm)
f
(mm)
L
(cm)
f
(mm)
L
(cm)
f
(mm)
L
(cm)
f
(mm)
L
(cm)
f
(mm)
L
(cm)
f
(mm)
120
86
64
48
39
32
27
24
21
19
17
16
14
12
10
9
8
6
5
6.0
4.3
2.7
1.5
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
120
86
70
52
42
35
30
26
23
21
19
17
15
13
11
10
8
7
6
6.0
4.3
3.4
1.9
1.2
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
277
204
168
143
115
96
83
72
64
58
53
48
41
36
32
29
24
21
18
13.8
10.2
8.4
6.8
4.4
3.1
2.3
1.8
1.4
1.1
<1
<1
<1
<1
<1
<1
<1
<1
<1
277
204
168
147
125
105
90
79
70
63
57
53
45
39
35
32
26
22
20
13.8
10.2
8.4
7.3
5.7
4.0
3.0
2.3
1.8
1.5
1.2
1.0
<1
<1
<1
<1
<1
<1
<1
380
290
242
212
190
174
150
132
118
106
96
88
76
66
59
53
44
38
33
19.0
14.5
12.1
10.6
9.5
8.7
6.5
5.0
4.0
3.3
2.7
2.3
1.7
1.3
1.0
<1
<1
<1
<1
261
195
161
135
109
91
78
69
61
55
50
46
39
34
31
27
23
19
17
13.1
9.7
8.1
6.3
4.1
2.9
2.1
1.6
1.3
1.1
<1
<1
<1
<1
<1
<1
<1
<1
<1
261
195
161
141
119
99
85
75
67
60
55
50
43
38
33
30
25
21
19
13.1
9.7
8.1
7.0
5.3
3.7
2.7
2.1
1.7
1.4
1.1
<1
<1
<1
<1
<1
<1
<1
<1
560
449
383
339
307
282
257
226
202
182
166
153
131
115
102
92
77
66
58
28.0
22.5
19.2
16.9
15.3
14.1
12.3
9.6
7.7
6.3
5.3
4.4
3.3
2.5
2.0
1.6
1.1
<1
<1
Selection example:
● 1.0 kN (≈100 kg) should be carried by a channel with a channel span
width L = 100 cm (single span simply supported).
Solution:
● Select the line showing the load, F = 1.0 kN.
● The MQ-41-RA2 to MQ-41D-R channels can be used because the
permissible span width (tabluated value) is larger or equal
to the required span, L = 100 cm.
The smaller value (Wy1, Wy2) is decisive for the calculated bending dimension (Wy1 = Iy/e1 or Wy2 = Iy/e2).
Perm. My = σperm.· min. (Wy1, Wy2)
3)
The channel length is max. 6.0 m. Contact Hilti technical staff about channels longer than 6.0 m!
Single load
Conversion
1 kp
1 kg
1N
1 kN
kp
–
1
0.1
100
kg
1
–
0.1
100
N
10
10
–
1000
kN
0.01
0.01
0.001
–
F[kN]
L/2
L/2
L[cm]
F
1)
2)
page 34
f[mm]
System MQ channel installation stainless steel
Load, F (kN)
25.00
Channel selection diagram
(stainless steel)
Single span
(simply supported)
20.00
with single load at mid span, L/2
All values were calculated for a permissible stress of
σperm. (see technical data for channel selection) and a
deflection of L/200.
15.00
MQ-52-R
10.00
F[kN]
MQ-41-R
®
L/2
Stainless
steel
L/2
5.00
MQ-41-RA2
MQ21-R
L[cm]
MQ-21-RA2
0.00
0
25
50
100
150
200
250
300
Span width (cm)
100
200
300
400
500
600
Span width (cm)
Load, F (kN)
30.00
25.00
20.00
MQ-41D-R
15.00
10.00
MQ-21D-R
5.00
MQ-21D-RA2
0.00
0 25
Channel selection table (stainless steel)
2.5
Single span (simply supported)
with single load at mid span, L/2
2
82.6
2
F[kN]
L[cm]
52
41.3
41.3
41.3
41.2
20.6
L/2
41.3
2
2
L/2
41.3
41.3
Max. load, F (kN) / deflection, f (mm)
MQ-21-RA2
MQ-21-R
MQ-41-RA2
MQ-41-R
MQ-52-R
F (kN)
max.
MQ-21D-RA2
MQ-21D-R
MQ-41D-R
Span width
L (cm)
F (kN)
max.
f (mm)
L/200
F (kN)
max.
f (mm)
L/200
F (kN)
max.
f (mm)
L/200
F (kN)
max.
f (mm)
L/200
f (mm)
L/200
F (kN)
max.
f (mm)
L/200
F (kN)
max.
f (mm)
L/200
F (kN)
max.
f (mm)
L/200
25
50
75
100
125
150
175
200
225
275
300
1.92
0.96
0.64
0.37
0.23
0.15
0.11
0.08
0.05
0.02
0.01
<1
1.6
3.6
5.0
6.3
7.5
8.8
10.0
11.3
13.8
15.0
2.10
1.05
0.66
0.37
0.23
0.15
0.11
0.08
0.05
0.02
0.01
<1
1.8
3.8
5.0
6.3
7.5
8.8
10.0
11.3
13.8
15.0
5.77
2.90
1.93
1.44
1.15
0.95
0.69
0.52
0.40
0.25
0.20
<1
<1
1.9
3.3
5.2
7.5
8.8
10.0
11.3
13.8
15.0
6.29
3.16
2.10
1.57
1.25
0.95
0.69
0.52
0.40
0.25
0.20
<1 10.59 <1
<1
5.32
<1
2.0 3.54 1.6
3.6 2.65 2.9
5.7 2.11 4.5
7.5 1.75 6.5
8.8 1.49 8.8
10.0 1.13 10.0
11.3 0.88 11.3
13.8 0.56 13.8
15.0 0.46 15.0
5.48
2.75
1.83
1.37
1.09
0.88
0.63
0.47
0.36
0.22
0.17
<1
<1
1.9
3.4
5.3
7.5
8.8
10.0
11.3
13.8
15.0
5.98
3.00
2.00
1.49
1.19
0.88
0.63
0.47
0.36
0.22
0.17
<1 18.36 <1
<1
9.23
<1
2.1 6.15 1.0
3.7 4.61 1.9
5.8 3.68 2.9
7.5 3.06 4.2
8.8 2.61 5.7
10.0 2.27 7.4
11.3 2.01 9.4
13.8 1.58 13.8
15.0 1.31 15.0
page 35
System MQ channel installation stainless steel
Technical data for brackets (stainless steel A5)
Type of load 1: uniform
F1 = q · i
Type of load 2: single
F1
F1 [N]
Bracket
MQK-21/300-R
MQK-21/450-R
MQK-41/300-R
MQK-41/450-R
MQK-41/600-R
MQK-21 D/450-R
MQK-41 D/750-R
Type of load 3
F1
Type of load 4
F2 F2
1/
2
1/2
1/
3
F1 [N]
F1 [N]
1/
3
Type of load 5
F3 F3 F3
1/ 1/ 1/ 1/
4 4 4 4
1/
3
F2 [N]
F3 [N]
Channel
L (mm)
HVZ-R M12
HST-R M12
HVZ-R M12
HST-R M12
HVZ-R M12
HST-R M12
HVZ-R M12
HST-R M12
HVZ-R M121)
300
450
300
450
600
450
750
870
400
2620
1740
1300
1650
3050
870
400
2620
1740
1300
1650
1890
870
570
2620
1740
1300
1650
3050
870
570
2620
1740
1300
1650
1890
340
150
1310
870
500
830
1520
340
150
1310
870
500
830
940
430
250
1310
870
650
820
1520
430
250
1310
870
650
820
940
290
150
870
580
430
550
1010
1)
2)
1)
2)
1)
2)
1)
2)
HST-R M122)
290
150
870
580
430
550
630
1)
Loading capacity of the bracket (steel loading capacity) or with HVZ-R M12 fastening, the loading capacity of the bracket is reached with the HVZ-R M12.
Loading capacity of the bracket with HST-R fastening, alternatively, loading values with HIT-RTZ M12 are at least those with HST-R M12.
Load values are for grade C20/25 concrete (≈ B25).
Alternatively, fastening in solid or hollow brick with HIT HY 50 and approval is possible. Use stainless-steel anchor rods (loading values not given in this table).
The bracket’s own weight has been allowed for.
The loads apply only if the bracket is fastened away from a building component edge (fastenings made at component edges must be designed separately).
Separate verification must be provided that forces are transferred to the respective base material, i.e. steel and concrete.
The application guidelines in anchor approvals must be observed. Loading values according to approval status July 2005.
The deflection (deformation) of L/150 was observed in all cases, this being measured at the point of load application.
2)
HVZ-R adhesive anchor
HST-R stud anchor
EDELSTAHL ®
®
®
EDELSTAHL ®
Rost
frei
Rost
frei
Stainless
steel
Stainless
steel
Technical data for brackets with angle brace (stainless steel A5)
Type of load 1: uniform
F1 = q · I
Bracket
MQK-21/450-R
MQK-41/450-R
MQK-41/600-R
MQK-21 D/450-R
MQK-41 D/750-R
L (mm)
Brace
450
450
600
450
750
short
short
long
short
long
F1 [N] 1)
4520
5360
4060
5360
3220
Type of load 2: single
1/
2
F1
Type of load 3
F1
1/2
F1 [N] 1)
1170
3520
2630
3350
3220
Type of load 4
Type of load 5
F2 F2
F3 F3 F3
1/4 1/4 1/4 1/4
1/3
F1 [N] 1)
420
2440
2030
2320
1610
1/3
1/3
F2 [N] 1)
2020
2680
2030
2680
1610
F3 [N] 1)
1780
1780
1350
1780
1070
1)
Loading capacity of the bracket (steel loading capacity) or the loading capacity of the bracket is reached with the HVZ-R, HIT-RTZ or HST-R M12 fastening.
Load values are for grade C20/25 concrete (≈ B25).
Alternatively, fastening in solid or hollow brick with HIT HY 50 and approval is possible. Use stainless-steel anchor rods (loading values not given in this table).
The bracket’s own weight has been allowed for.
The loads apply only if the bracket is fastened away from a building component edge (fastenings made at component edges must be designed separately).
Separate verification must be provided that forces are transferred to the respective base material, i.e. steel and concrete.
The application guidelines in anchor approvals must be observed. Loading values according to approval status July 2005.
The deflection (deformation) of L/150 was observed in all cases, this being measured at the point of load application.
page 36
System MQ channel installation stainless steel
Installation channels
Features:
■ Serrated C-section.
■ Installation assisted by dimension marking.
■ Great flexibility due to slots.
■ Aesthetic appearance.
■ Double channels laser welded along both sides.
Technical data:
Material:
Stainless steel, 1.4301(A2)
Stainless steel, 1.4571(A5)
Single channels
➀
®
Stainless
steel
Stainless steel, 1.4301(A2)
➁
100
2
2
63x13.5
20.6
Channel
height (mm)
Length
(m)
Metal thickness
(mm)
Weight
(kg/m)
21
21
41
41
3
6
3
6
2
2
2
2
1.45
1.45
2.09
2.09
➀
➀
➁
➁
Ordering
designation
Item no.
MQ-21-RA2 3 m
MQ-21-RA2 6 m
MQ-41-RA2 3 m
MQ-41-RA2 6 m
303990
303991
303994
303995
100
63x13.5
41.3
22.3
7.5
22.3
41.3
7.5
41.3
➂
100
2.5
63x13.5
52
Stainless steel, 1.4571(A5)
Channel
height (mm)
Length
(m)
Metal thickness
(mm)
Weight
(kg/m)
21
21
41
41
52
52
3
6
3
6
3
6
2
2
2
2
2.5
2.5
1.47
1.47
2.12
2.12
3.00
3.00
➀
➀
➁
➁
➂
➂
Ordering
designation
Item no.
MQ-21-R 3 m
MQ-21-R 6 m
MQ-41-R 3 m
MQ-41-R 6 m
MQ-52-R 3 m
MQ-52-R 6 m
303988
303989
303992
303993
303996
303997
22.3
7.5
41.3
Channels ➂ firestop tested
IBMB no. 3897/1802-5
Double channels
➀
®
Stainless
steel
➁
100
100
Stainless steel, 1.4301(A2)
Channel
height (mm)
41
41
Length
(m)
Metal thickness
(mm)
Weight
(kg/m)
3
6
2
2
2.92
2.92
Ordering
designation
Item no.
➀ MQ-21D-RA2 3 m
➀ MQ-21D-RA2 6 m
41.2
63x13.5
82.6
22.3
304000
304001
63x13.5
7.5
41.3
22.3
7.5
41.3
Stainless steel, 1.4571(A5)
Channel
height (mm)
41
41
82
82
1)
Length
(m)
3
6
3
6
Metal thickness
(mm)
2
2
2
2
Weight
(kg/m)
2.96
2.96
4.27
4.27
Ordering
designation
➀
➀
➁
➁
Item no.
1)
MQ-21D-R 3 m
MQ-21D-R 6 m1)
MQ-41D-R 3 m
MQ-41D-R 6 m
303998
303999
304002
304003
Will initially be supplied as the MN-version.
Channels ➁ firestop tested
IBMB no. 3897/1802-5
page 37
System MQ channel installation stainless steel
Brackets
Features:
■ Serrated C-section.
■ Installation assisted by dimension marking.
■ Great flexibility due to slots.
■ Double-channel brackets welded all around.
Technical data:
Material:
Stainless steel, 1.4571(A5)
➀
Brackets
➁
6
300; 450
8
300; 450; 600
20x14
Channel
length (mm)
Channel
section
Weight
each (g)
Packaging
conctents (pcs)
300
450
300
450
600
450
750
MQ-21-R
MQ-21-R
MQ-41-R
MQ-41-R
MQ-41-R
MQ-21D-R
MQ-41D-R
670
890
950
1260
1570
1720
2730
10
10
10
10
8
10
4
➀
➀
➁
➁
➁
➂
➃
Ordering
designation
Item no.
MQK-21/300-R
MQK-21/450-R
MQK-41/300-R
MQK-41/450-R
MQK-41/600-R
MQK-21D/450-R
MQK-41D/750-R
284388
304004
304005
304006
304007
304008
304009
20x14
80 125
80 125
50
50
➂
➃
8
450
10
750
20x14
20x14
80 125
Brackets ➁ ➃ firestop tested
120
50
60
IBMB no. 3897/1802-5
®
Angle brace
Stainless
steel
L
74
11
For fabricating wall brackets with individual stand-off lengths.
Material:
Material thickness:
Angle brace, short
Angle brace, long
1.4571 (A5)
4 or 3 mm
H
L
α
Weight
each (g)
Pakaging
Ordering
contents (pcs) designation
Artikel-Nr.
A
355
635
328
528
324
524
45°
45°
650
1060
10
10
304011
304010
(See technical data on page 36)
MQK-SK-R
MQK-SL-R
A
H
33
13.5
page 38
165
System MQ channel installation stainless steel
Channel nut
Features:
■ Simple, compact, time saving.
■ Single part which can be prefitted.
■ Easy to use.
■ Universal: one and the same nut for all channels.
Technical data:
Material:
Stainless steel
®
Pushbutton
Stainless
steel
Bolt:
Width across flats:
Nut:
Plate:
M10 material A4-70 as per DIN EN ISO 3506-1
17 mm
1.4581 as per DIN EN 10 283
1.4401 (A4) as per DIN 17 440
Connection
thread
Weight
each (g)
Packaging
contents (pcs)
Outside packaging
contents (pcs)
Ordering
designation
Item no.
M10
77
25
200
MQN-R
304012
Rec. tensile load,
Zrec (kN)
Channel I
Channel II
Rec. shear load,
Qrec (kN)
Tightening torque
MD (Nm)
Item
MQN-R
Channel I:
Channel II:
5.0
8.0
5.0
40
MQ-21, MQ-41, MQ-21D, MQ-41D (stainless steel)
MQ-52 (stainless steel)
1)
IBMB no. 3897/1802-5
1)
Shear loading applies to single fastening. Qrec (kN) 9.0 for two fastenings
®
Wing nut
Stainless
steel
M 6
M 8
M10
M12
Nut, M6–M12:
Plastic:
1.4581 as per DIN EN 10 283
PA
Connection
thread
Weight
each (g)
Packaging
contents (pcs)
Outside packaging
contents (pcs)
Ordering
designation
Item no.
M 6
M 8
M10
M12
29
27
25
23
25
25
25
25
500
500
500
500
MQM-M6-R
MQM-M8-R
MQM-M10-R
MQM-M12-R
304014
304015
304016
304017
Rec. tensile load,
Zrec (kN)
Channel I
Channel II
Rec. shear load,
Qrec (kN)
(bolt A4-70)
Tightening torque
MD (Nm)
Item
MQM-M 6-R
MQM-M 8-R
MQM-M10-R
MQM-M12-R
Channel I:
Channel II:
3.0
3.0
1.5
10
5.0
5.0
3.5
20
5.0
8.0
5.0
40
5.0
8.0
5.0
40
MQ-21, MQ-41, MQ-21D, MQ-41D (stainless steel)
MQ-52 (stainless steel)
page 39
System MQ channel installation stainless steel
Pipe ring saddle
Features:
■ Single part, simple and time-saving in use.
■ For all types of channels.
■ For threaded rods from M8 to M16.
Technical data:
Material:
Stainless steel
MQA-R pipe ring saddle
Nut:
Plate:
Plastic:
1.4581 as per DIN EN 10 283
1.4401 (A4) as per DIN 17 440
PB
®
Stainless
steel
M 8
M10
M12
M16
Connection
thread
Weight
each (g)
Packaging
contents (pcs)
Outside packaging
contents (pcs)
M8
M10
M12
M16
75
73
71
84
25
25
25
25
200
200
200
200
Item
Rec. tensile load,
Zrec (kN)
Channel I
Channel II
MQA-M 8-R
MQA-M10-R
MQA-M12-R
MQA-M16-R
Channel I:
Channel II:
3.0
3.0
9
12.1
5.0
7.0
18
24.1
5.0
8.0
31
42.1
5.0
8.0
40
100.0
MQ-21, MQ-41, MQ-21D, MQ-41D (stainless steel)
MQ-52 (stainless steel)
1)
➀
➁
➁
➁
Tightening torque
MD (Nm)
Ordering
designation
Item no.
MQA-M 8-R
MQA-M10-R
MQA-M12-R
MQA-M16-R
304021
304022
304023
304024
Bending moment, threaded
rod A4-70 (Nm) 1)
Calculation as per DIBt
Pipe ring saddles ➁ firestop tested
IBMB no. 3897/1802-5
®
MQG-2-R base plate
Material:
M16
1/2"
3/4"
1"
Stainless
steel
1.4571 (A5)
Connection
thread
Weight
each (g)
Packaging
contents (pcs)
Ordering
designation
Item no.
M16
1
/2″
3
/4″
1″
180
170
185
205
20
20
20
20
MQG-2-M16-R
MQG-2-1/2″-R
MQG-2-3/4″-R
MQG-2-1″-R
304028
304029
304030
304031
Item
Rec. tensile load,
Zrec (kN)
Rec. shear load,
Qrec (kN)
Tightening torque
MD (Nm)
Bending moment,
threaded rod A4-70 (Nm)
MQG-2-M16-R
MQG-2-1/2″-R
MQG-2-3/4″-R
MQG-2-1″-R
6.0
6.0
6.0
6.0
9.0
9.0
9.0
9.0
40
40
40
40
100.0
42.1
200.0
200.0
page 40
50
155
100
System MQ channel installation stainless steel
Angles, angle brackets,
connectors
Features:
■ Univesal: few parts for all applications.
■ Easy to use.
■ Three-dimensional, thus high strength.
■ The MQN-R pushbutton can be prefitted.
Technical data:
Material:
Material thickness:
90º angle
35
10
Stainless steel, 1.4571(A5)
4 mm
➀
®
Stainless
steel
Angle, 2 hole, 90°
Angle, 4 hole, 90°
Angle, 8 hole, 90°
Angle, 3 hole, 90°
➁
19
19.4
Frec
Weight
each (g)
Packaging
contents (pcs)
110
220
420
160
10
10
10
10
Frec
5.0 kN
3.7 kN
➀
➁
➂
➃
Ordering
designation
Item no.
MQW-2-R
MQW-4-R
MQW-8/90°-R
MQW-3-R
304051
304054
304055
304052
➂
Frec
9.0 kN
Frec
Frec
3.0 kN
Frec
2.4 kN
Frec
6.8 kN
Frec
2.5 kN
61
61
➃
5.0 kN
61
111
105
55
45º angle
®
➀
Stainless
steel
Angle, 8 hole, 45°
Angle, 3 hole, 45°
105
Frec
9.0 kN
Frec
5.0 kN
Frec
7.0 kN
Frec
2.5 kN
45°
Weight
each (g)
Packaging
contents (pcs)
410
155
10
10
Ordering
designation
➀ MQW-8/45°-R
➁ MQW-3/45°-R
Item no.
304056
304053
➁
106
45°
56
Angle bracket, one brace
Angle bracket, two braces
➁
➀
®
Angle bracket
Stainless
steel
198
110
Weight
each (g)
Packaging
contents (pcs)
460
1180
10
10
Ordering
designation
Item no.
➀ MQW-S/1-R
➁ MQW-S/2-R
304058
304059
155
Frec
2.0 kN
Frec
2.0 kN
198
118
Frec
3.0 kN
Frec
3.0 kN
100
Frec
8.0 kN
Frec
5.0 kN
Frec
2.0 kN
Frec
3.0 kN
13.5
Frec
8.0 kN
Frec
5.0 kN
Frec
4.0 kN
Frec
6.0 kN
13.5
167
®
Connector, two dimensional
Connector, triple, two dimensional
Stainless
steel
Weight
each (g)
Packaging
contents (pcs)
Ordering
designation
Item no.
602
10
MQV-3/2D-R
304034
112
Frec
9.0 kN
Frec
7.0 kN
page 41
System MQ channel installation stainless steel
55
®
Connector, three dimensional
Connector, triple, three dimensional
Stainless
steel
Weight
each (g)
Packaging
contents (pcs)
Ordering
designation
Item no.
451
10
MQV-3/3D-R
304035
112
®
Connector, two dimensional
Connector, double, two dimensional
167
Stainless
steel
Weight
each (g)
Packaging
contents (pcs)
Ordering
designation
Item no.
440
10
MQV-2/2D-R
304032
Frec
9.0 kN
Frec
5.0 kN
112
®
Longitudinal channel connector
Stainless
steel
205
45
Channel connector, 12 hole
Weight
each (g)
Packaging
contents (pcs)
Ordering
designation
Item no.
555
10
MQV-12-R
304037
Channel base / Base material
connector
Features:
■ Reliable and easy to use.
■ Connection of channels to any base material.
■ The MQN-R pushbutton can be prefitted.
19
19.4
35
10
Technical data:
Material:
Stainless steel, 1.4571(A5)
Separate design verification of the fastening on the base material
must be provided.
®
Base material connector
Stainless
steel
167
112
Suitable for
channel height
Weight
each (g)
Packaging
contents (pcs)
Ordering
designation
Item no.
MQ-41, MQ-21D
440
10
MQV-2/2D-14-R
304033
Frec
9.0 kN
Frec
5.0 kN
112
Frec
(kN)
Channel
(B)
Bolt
(A)
Pushbutton
Item
Tightening torque
MD (Nm)
MQV-2/2D-14-R
7.8
MQ-41-R
Double
MQN-R
40
®
➀
Stainless
steel
Channel base
A
Suitable for
channel height
Weight
each (g)
Packaging
contents (pcs)
MQ-21 – MQ-72
MQ-41 D
1150
1880
12
8
Ordering
designation
➀ MQP-21-72-R
➁ MQP-82-R
Frec
(kN)
Bolt
(A)
Pushbutton
Item
Tightening torque
MD (Nm)
MQP-21-72-R
MQP-82-R
9,0
12,6
Double
Quadruple
MQN-R
MQN-R
40
40
105
Item no.
304047
304048
20x14
Frec
6
135
185
80
➁
A
20x14
Channel base 햲 firestop tested
Frec
8
150
100
IBMB no. 3897/1802-5
page 42
A
106
200
System MQ channel installation stainless steel
Beam clamp
Features:
■ For connecting installation channels to steel beams without drilling
or welding.
■ The clamp set fits all standard T-beams
(max. clamping thickness ≤ 23 mm).
Technical data:
Material:
Stainless steel
®
MQT-R beam clamp
➀23mm
Stainless
steel
54
U-bolt:
1.4401 (A4)
Claw plate: 1.4401 (A4)
Nut:
A4-70 as per DIN EN ISO 3506-2
Suitable for
channel height
Weight
each (g)
Packaging
contents (pcs)
MQ-21, MQ-41, MQ-21D
MQ-52, MQ-41D
427
471
10
10
Ordering
designation
➀ MQT-21-41-R
➁ MQT-52-82-R
Tightening torque
MD (Nm)
Beam clamp
max. clamping thickness
➁23mm
p g
Item no.
54
M10
M10
127
85 30
6
65
75
6
304067
304068
75
Max. rec. load
(kN)
MQT-21-41-R
10
MQT-52-82-R
20
Always use beam clamps in pairs.
Channel loading values must be allowed for.
3.0
4.5
®
MQT-C-R beam clamp
Clamp:
Screw:
20
1.4401 (A4)
M12, material A4-70 as per DIN EN ISO 3506-1
Suitable for
channel height
Material
thickness (mm)
Weight
each (g)
MQ-21, MQ-41
10
260
Beam clamp
33.5
Stainless
steel
Packaging
contents (pcs)
Tightening torque
MD (Nm)
MQT-C23-R
40
Always use beam clamps in pairs.
Channel loading values must be allowed for.
6
Outside packaging
contents (pcs)
Ordering
designation
Item no.
48
MQT-C23-R
304069
10
40
M 12
Max. rec. load
(kN)
2.5
page 43
System MQ channel installation stainless steel
Universal joint MQP-U (HDG)
Size
D1
(mm)
D2
(mm)
Weight
each (g)
Packaging
contents (pcs)
Ordering
designation
Item no.
M12
M16
12.5
16.5
12.5
16.5
390
390
10
10
MQP-U M12-F
MQP-U M16-F
388359
388360
Item
Max. rec. load
(kN)
Tightening torque MD
(Nm)
MQP-U M12
MQP-U M16
14
14
20
20
Technical data for fastening the MQP-U-F universal joint to MQ channels
Angle
Max. recommended load Frec (kN)
Channel I
Channel II
Tightening torque
MD (Nm)
90°
5.0
8.0
20
60°
4.0
8.0
20
30°
3.0
5.0
20
0°
3.0
5.0
20
Channel I: MQ-21-F, MQ-31-F, MQ-41-F, MQ-21D-F, MQ-41D-F
Channel II: MQ-52-F, MQ-72-F, MQ-52-72 D-F, MQ-124XD-F
Interim values of the angle can be interpolated linearly.
page 44
FF
empf
rec
Winkel
variable
variabel
angle
System MQ channel installation stainless steel
Clamp
Features:
■ Universal: few parts for all applications.
■ Easy to use.
■ The MQN-R pushbutton can be prefitted.
35
Technical data:
Material:
Material thickness:
19
19.4
10
Stainless steel, 1.4571(A5)
4 mm
®
Clamps
➁
➀
Stainless
steel
Suitable for
channel height
Weight
each (g)
Packaging
contents (pcs)
MQ-21
MQ-41, MQ-21D
MQ-52
MQ-41D, MQ-41, MQ-21D
210
240
340
340
10
10
10
10
➀
➁
➂
➃
Ordering
designation
Item no.
MQB-21-R
MQB-41-R
MQB-52-R
MQB-82-R
304060
304061
304062
304063
➂
161
161
106
106
161
106
➃
161
106
page 45
System MQ channel installation stainless steel
Accessories
Features:
■ Machting items in programme.
Technical data:
Material:
Stainless steel, 1.4571(A5)
®
Boss plate
52.5
Stainless
steel
45.5
5
Thread
Weight
each (g)
Packaging
contents (pcs)
M 6
M 8
M10
M12
M16
94
92
88
84
80
20
20
20
20
20
Ordering
designation
MQZ-L7-R
MQZ-L9-R
➀ MQZ-L11-R
➀ MQZ-L13-R
➀ MQZ-L17-R
7.5
9.5
11.5
13.5
17.5
Item no.
304070
304071
304072
304073
304074
Boss plates ➀ firestop tested
IBMB no. 3897/1802-5
®
Installation washer
Stainless
steel
28
34.2
Hole diameter
(mm)
Weight
each (g)
Packaging
contents (pcs)
Ordering
designation
Item no.
10,5
30
40
MQZ-U-R
304084
10.5
®
Adaptor
M12
M16
1/2"
3/4"
Stainless
steel
Material:
1.4401 (A4)
Internal
thread
External
thread
Width across
flats (mm)
Weight
each (g)
Packaging
contents (pcs)
Ordering
designation
Item no.
M12
M16
1
/2″
3
/4″
M10
M12
M16
M16
18
19
24
30
41
92
109
135
25
25
25
25
MQZ-A-M12/M10-R
MQZ-A-M16/M12-R
MQZ-A-1/2″/M16-R
MQZ-A-3/4″/M16-R
284389
304079
304080
304081
Channel endcap
Made of polypropylene (PP), suitable for all installation channels.
Suitable for
channel height
Weight
each (g)
Packaging
contents (pcs.)
MQ-21, MQ-21D
2
2
2
50
50
50
MQ-41, MQ-41D
Ordering
designation
Item no.
➀ MQZ-E21
➁ MQZ-E31*
➂ MQZ-E41
* Usable for MQ-52- and MQ-72-channel sections.
➀
21
page 46
➁
31
➂
41.3
370598
369686
369685
47.5
M10
M12
M16
16
System MQ channel installation stainless steel
3D system
Features:
■ Bracing with predetermined bending point.
Technical data:
Material:
Material thickness:
Width across flats:
Tightening torque:
Stainless steel, 1.4571 (A5)
3 mm
17 mm
40 Nm
®
3D system
Stainless
steel
50
Description
Weight
each (g)
Packaging
contents (pcs)
Ordering
designation
Item no.
Brace
73
20
MQ3D-A-R
304085
45°
Directly on channel:
25
Note:
When installing the brace, an M10-screw of A4-70 grade must be used.
The min. length of screw thread engagement must be observed.
Frec Qrec MQM-M10-R
fastened to channel with
MQZ-L11-R boss plate
M10x20 A4-70 hex. screw
MQM-M10-R wing nut.
Frec = 2.5 kN
Variable
angle
®
Installation Accessories
Stainless
steel
Threaded rod DIN 975
L
M
Material: A4-70 as per DIN 267-11
Thread size [M]
Length L [mm]
Weight each [g]
Packaging contents (pcs)
Ordering designation
Item no.
M8
M8
M10
M10
M12
M12
M16
M16
M20
M20
1000
3000
1000
3000
1000
3000
1000
3000
1000
3000
320
960
500
1500
730
2190
1330
3990
2100
6300
25
25
20
20
10
15
5
10
5
1
AM 8x1m
AM 8x3m
AM 10x1m
AM 10x3m
AM 12x1m
AM 12x3m
AM 16x1m
AM 16x3m
AM 20x1m
AM 20x3m
58666
58706
58670
58707
58671
58709
58683
58712
58688
58715
EDELSTAHL ®
GR-G threaded pipe
Stainless
steel
M
Material: Stainless steel, 1.4404 (A4-70)
L
Inch
size
Lenght
L (mm)
Weight each
(g)
Packaging
contents (pcs)
Ordering
designation
Item no.
⁄2 "
⁄4"
1"
2000
2000
2000
1800
2800
4880
10
5
5
GR-G 1⁄2"-A4ⴛ2 m
GR-G 3⁄4"-A4ⴛ2 m
GR-G 1"-A4ⴛ2 m
286862
286863
286864
1
3
M12, M16
EDELSTAHL ®
MQZ-A reducing socket
Stainless
steel
12.9
33.5
Material: Stainless steel, 1.4435 (A4)
16
34
Internal thread
inch size
⁄4"
⁄4"
3
3
G 3/4"
Internal thread
M
Lenght
L (mm)
Weight each
(g)
Packaging
contents (pcs)
Ordering
designation
Item no.
M12
M16
33.5
33.5
169
161
8
8
MQZ-A-IG 3⁄4 "/ IG M12-R
MQZ-A-IG 3⁄4 "/ IG M16-R
267710
267711
page 47
Moving components stainless steel
MRG-R roll connector
Features:
■ For use suspended or standing without conversion
■ Coordinated loading classes suitable for Hilti pipe rings
■ Temperature resistant up to 300°C as no parts are of plastic.
■ Stiffened base plate suitable for MQ channel installation system
■ Slide can not pull out.
Technical data:
Material:
Stainless steel 1.4571 (A5)
Smooth rolling on coated rollers.
Coefficient of friction: µ0=0.15
Large movement: MRG 2-R up to
80 mm, MRG-D6-R up to 116 mm.
Center mark for setting to zero.
Delivery without nut, washer or bolt
11.5 x 20
®
MRG 2-R roll connector
MRG 2-R
Stainless
steel
One connection boss
80
Connection boss/
double thread
Frec
(kN)
Max. displacement
axial (mm)
Max. displacement
transverse (mm)
Packaging
contents (pcs)
Ordering
designation
Item no.
M10 / M12
1.5
80
–
4
MRG 2-R
304086
Roll connector MRG 2-R firestop tested
IBMB no. 3897/1802-5
®
MRG-D6-R double roll connector
Stainless
steel
Two connection bosses
90
Connection boss/
double thread
Frec
(kN)
Max. displacement
axial (mm)
Max. displacement
transverse (mm)
Packaging
contents (pcs)
Ordering
designation
Item no.
M12 / M16
6.0
116
–
2
MRG-D6-R
304087
13.5 x 20
MRG-D6-R
mm mm
58 16
n ± nt 1
ctio eme
le
f
c
de la
x. isp
ma ax. d
m
159
219
page 48
Pipe rings stainless steel
MP-SRNI / MP-SRN pipe rings
For fastening pipes up to 64 mm
in corrosive surroundings
®
Stainless
steel
Fields of application:
■ Heating and industry
■ Food industry (except production)
■ Water treatment
Benefits:
■ Pipe ring with passive fire prevention verification as per DIN 4102, part 2
■ Resistance-welded connection boss
■ High resistance to corrosion (A5 stainless steel)
■ Clamping bolt secured against loss
■ Non-slip (bonded), pre-fitted rubber inlay
Technical data:
Max permissible tensile load:
MP-SRNI / MP-SRN up to 64 mm diameter
Frec. = 1500 N
Pipe ring material:
A5 1.4571 / DIN 17441
Clamping bolts:
slotted hexagon head
Rubber inlay material:
EPDM
Temperature resistance:
–50°C to +120°C
Shore A hardness (DIN 53 505):
50 ± 5
Noise reduction:
Δ LA = 15 dB (A)
Stability:
aging, ozone, weather and hot water resistant
MP-SRNI pipe ring
®
Stainless
steel
With metric connection boss
and insulating inlay as per DIN 4109
firestop
ød
s
8
h
M8 SW13
Acoustic
insulation
M10 SW17
for DIN 4109
10
inspected
bs
b
Building
material class
B2
„Normal flammability“
as per DIN 4102
Size
(mm/ inch)
Clamping range,
d (mm)
Connection thread /
width across flats
Clamping
bolts
Packaging
contents (pcs)
Ordering
designation
Item no.
h (mm)
/8″
/2″
3
/4″
1″
11/4″
11/2″
57
2″
Dimensions
bs (mm) b × s (mm)
15.5–18.5
19.5–22.5
25.5–28.5
33.0–37.0
38.0–44.0
48.0–52.0
54.0–58.0
59.0–64.0
M8 / SW13
M8 / SW13
M8 / SW13
M8 / SW13
M10 / SW17
M10 / SW17
M10 / SW17
M10 / SW17
M6
M6
M6
M6
M8
M8
M8
M8
55
61
68
76
82
91
97
102
19
22
25.5
29.5
34.5
39
42
44.5
25
25
25
25
25
25
25
10
MP-SRNI 17
MP-SRNI 21
MP-SRNI 27
MP-SRNI 34/36
MP-SRNI 38/42
MP-SRNI 48/50
MP-SRNI 57
MP-SRNI 60/63
374186
374187
374188
374189
374192
374193
374194
374195
3
1
17.5 × 2
17.5 × 2
17.5 × 2
17.5 × 2
17.5 × 2
17.5 × 2
17.5 × 2
17.5 × 2
page 49
Pipe rings stainless steel
MP-SRN pipe ring
®
Stainless
steel
With metric connection boss
without insulating inlay
8
ød
s
h
M8 SW13
10
M10 SW17
b
bs
Size
(mm/ inch)
Clamping range,
d (mm)
Connection thread /
width across flats
Clamping
bolts
Packaging
contents (pcs)
Ordering
designation
Item no.
h (mm)
/8″
/2″
3
/4″
1″
36
38
11/4″
11/2″
57
2″
63
Dimensions
bs (mm) b × s (mm)
15.5–18.5
19.5–22.5
25.5–28.5
32.5–35.5
34.5–37.5
36.5–39.5
40.5–43.5
46.5–51.5
55.5–58.5
58.5–61.5
61.5–64.5
M8 / SW13
M8 / SW13
M8 / SW13
M8 / SW13
M10 / SW17
M10 / SW17
M10 / SW17
M10 / SW17
M10 / SW17
M10 / SW17
M10 / SW17
M6
M6
M6
M6
M6
M6
M6
M8
M8
M8
M8
51
55
61
68
70
72
76
82
91
94
97
17
19
22
25.5
28.8
29.5
31.5
34.5
39
40.5
42
25
25
25
25
25
25
25
25
25
10
10
MP-SRN 17
MP-SRN 21
MP-SRN 27
MP-SRN 34
MP-SRN 36
MP-SRN 38
MP-SRN 42
MP-SRN 48/50
MP-SRN 57
MP-SRN 60
MP-SRN 63
254697
254698
254669
254700
254701
254702
254703
254704
254705
254706
254707
3
1
page 50
17.5 × 2
17.5 × 2
17.5 × 2
17.5 × 2
17.5 × 2
17.5 × 2
17.5 × 2
17.5 × 2
17.5 × 2
17.5 × 2
17.5 × 2
Pipe rings stainless steel
MP-MRI / MP-MR pipe rings
For pipe fastenings in corrosive surroundings
in the medium-duty diameter range from 21/2″ to 219 mm
®
Stainless
steel
Fields of application:
■ Heating and industry
■ Food industry (except production)
■ Water treatment
Benefits:
■ Pipe ring with passive fire prevention verification as per DIN 4102, part 2
■ Solid connection boss, welded all round
■ Greater stiffness from profiled pipe ring steel band
■ Material suitable for pipe diameter. Loads up to 5,000 N
■ High resistance to corrosion (A5 stainless steel)
■ Clamping bolt secured against loss
■ Non-slip (bonded), pre-fitted rubber inlay
Technical data:
Max permissible load for suspensions
68 mm to 3″ diameter,
Frec. = 3000 N
101.6 mm to 6″ diameter,
Frec. = 4000 N
177.8 to 219.1 mm
Frec. = 5000 N
Pipe ring material:
A5 1.4571 / DIN 17441
Clamping bolts:
slotted hexagon head
Rubber inlay material:
EPDM
Temperature resistance:
–50 to +120°C
Shore A hardness (DIN53 505):
50± 5
Noise reduction:
Δ LA = 18 dB (A)
Stability:
aging, ozone, weather and hot water resistant
Acoustic
insulation
for DIN 4109
inspected
Building
material class
B2
„Normal flammability“
as per DIN 4102
firestop
MP-MRI pipe ring
®
Stainless
steel
With metric connection boss
and insulating inlay as per DIN 4109
s
h
16
M16 SW24
ød
12
M12 SW19
M10 SW17
b
10
bs
Size
(mm/ inch)
Clamping range,
d (mm)
Connection thread /
width across flats
Clamping
bolts
Dimensions
bs (mm) b × s (mm)
h (mm)
Packaging
contents (pcs)
Ordering
designation
68/72
21/2″
78/84
3″
101.6
4″
117
125
133
5″
159
6″
177.8
193.7
212
219.1
68– 72
70– 77
78– 84
82– 90
97–103
108–114
114–119
122–127
132–137
137–142
156–162
162–168
175–180
190–200
210–219
217–224
M10 / SW17
M10 / SW19
M10 / SW19
M10 / SW19
M12 / SW19
M12 / SW19
M12 / SW19
M12 / SW19
M12 / SW19
M16 / SW21
M16 / SW21
M16 / SW21
M16 / SW21
M16 / SW21
M16 / SW21
M16 / SW21
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
129
136
145
150
172.5
183.5
189
197
207
212
232
238.5
252.5
271
291
296
50
48
54
53
64.5
70
73.5
77.5
82.5
89
97
101
109.5
115
125.5
129.5
10
10
10
10
5
5
5
5
10
10
10
10
10
10
10
10
MP-MRI
MP-MRI
MP-MRI
MP-MRI
MP-MRI
MP-MRI
MP-MRI
MP-MRI
MP-MRI
MP-MRI
MP-MRI
MP-MRI
MP-MRI
MP-MRI
MP-MRI
MP-MRI
24 × 2.0
24 × 2.0
24 × 2.0
24 × 2.0
30 × 2.5
30 × 2.5
30 × 2.5
30 × 2.5
30 × 2.5
30 × 2.5
30 × 2.5
30 × 2.5
30 × 3.0
30 × 3.0
30 × 3.0
30 × 3.0
Item
no.
68/72
21/2″
78/84
3″
101.6
4″
117
125
133
5″
159
6″
177.8
193.7
212
219.1
372044
372045
372046
372047
372048
372049
372050
372051
372052
372053
372054
372055
372056
372057
372058
372059
page 51
Pipe rings stainless steel
MP-MR pipe ring
®
Stainless
steel
With metric connection boss
without insulating inlay
s
h
16
M16 SW24
ød
12
M12 SW19
M10 SW17
b
10
bs
Size
(mm/ inch)
Clamping range,
d (mm)
Connection thread /
width across flats
Clamping
bolts
Dimensions
bs (mm) b × s (mm)
h (mm)
Packaging
contents (pcs)
Ordering
designation
68/72
21/2″
3″
101,6
4″
117
125
133
5″
159
6″
177.8
193.7
212
219.1
68– 72
75– 80
87– 93
97–104
109–114
116–123
125–131
133–138
139–145
156–162
162–168
175–180
190–200
210–219
217–224
M10 / SW17
M10 / SW17
M10 / SW17
M12 / SW19
M12 / SW19
M12 / SW19
M12 / SW19
M12 / SW19
M16 / SW21
M16 / SW21
M16 / SW21
M16 / SW21
M16 / SW21
M16 / SW21
M16 / SW21
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
117,5
129
145
160
172,5
180
189
197
202,5
226
232
242,5
262
281,5
286,5
43,5
50
54
60
64,5
70
73,5
77,5
81,5
94
97
106,5
112
122,5
126,5
10
10
10
5
5
5
5
10
10
10
10
10
10
10
10
MP-MR
MP-MR
MP-MR
MP-MR
MP-MR
MP-MR
MP-MR
MP-MR
MP-MR
MP-MR
MP-MR
MP-MR
MP-MR
MP-MR
MP-MR
page 52
24 × 2,0
24 × 2,0
24 × 2,0
30 × 2,5
30 × 2,5
30 × 2,5
30 × 2,5
30 × 2,5
30 × 2,5
30 × 2,5
30 × 2,5
30 × 3,0
30 × 3,0
30 × 3,0
30 × 3,0
Item
no.
68/72
21/2″
3″
101,6
4″
117
125
133
5″
159
6″
177,8
193,7
212
219,1
374197
374198
374200
374201
374202
374203
374204
374205
374206
374207
374208
374209
374210
374211
374212
Pipe rings stainless steel
MP-MRXI pipe ring
®
Stainless
steel
For pipe fastenings in corrosive surroundings
in the diameter range 244 to 508 mm
Fields of application:
■ Heating and industry
■ Food industry (except production)
■ Water treatment
Benefits:
■ Solid connection boss, welded all round
■ High loading capacity up to 13,000 N
■ Strong half-rings (hoops) for high stability
■ Strong clamping bolts (M16) for high loads
■ High resistance to corrosion (A5 stainless steel)
■ Non-slip (bonded), pre-fitted rubber inlay
Acoustic
insulation
for DIN 4109
inspected
Building
material class
B2
„Normal flammability“
as per DIN 4102
Technical data:
Max permissible load for suspensions
244.5 to 406 mm diameter,
Frec. = 10000 N
457 to 508 mm diameter,
Frec. = 13000 N
Pipe ring material:
A5 1.4571 / DIN 17441
Rubber inlay material:
EPDM
Temperature resistance:
–50 to +120°C
Shore A hardness (DIN53 505):
50 ± 5
Noise reduction:
Δ LA = 16 dB (A)
Stability:
aging, ozone, weather and hot water resistant
Not for use in painting processes
MP-MRXI pipe ring
®
Stainless
steel
With metric connection boss
and insulating inlay as per DIN 4109
s
h
16
M16 SW24
ød
b
bs
Size
(mm)
Clamping range,
d (mm)
244.5
244–253
273
267–274
280
275–282
324
314–324
326
324–330
355
348–356
406
400–409
457
454–462
508
500–508
* Available on request
Connection thread /
width across flats
Clamping
bolts
Dimensions
bs (mm) b × s (mm)
h (mm)
Packaging
contents (pcs)
Ordering
designation
M16 / SW21
M16 / SW21
M16 / SW21
M16 / SW21
M16 / SW21
M16 / SW21
M16 / SW21
M16 / SW21
M16 / SW21
M16
M16
M16
M16
M16
M16
M16
M16
M16
355
372
384
441
445
471
524
585
631
147.5
156
162
182.5
184.5
197.5
224
251.5
274.5
10
10
10
1
1
1
1
1
1
MP-MRXI
MP-MRXI
MP-MRXI
MP-MRXI
MP-MRXI
MP-MRXI
MP-MRXI
MP-MRXI
MP-MRXI
50 × 4
50 × 4
50 × 4
50 × 4
50 × 4
50 × 4
50 × 4
70 × 5
70 × 5
Item
no.
244,5
273
280
324
326 *
355 *
406 *
457 *
508 *
374213
374214
374215
374216
374217
374218
374219
374220
374221
page 53
Pipe rings stainless steel
Stainless steel accessories for pipe rings
d
H
®
∅a
Stainless
steel
Base plate
Material: 1.4571 (A5) stainless steel
Version: Connection boss boss welded all round
Connection boss
[D]
H
[mm]
a
[mm]
Max. load Shear load for
F [kN]
A = 150 mm [kN]
Package
Ordering
cont. (pcs) designation
109
Item no.
150
100
M16 hex.
16
13.5 12.5 2.0
25
MFP-GP-R M16
376258
3
/4″ boss
17
13.5 12.5 2.0
25
MFP-GP-R 3/4″
376259
The means of fastening to the base material, e. g. anchors, requires separate verification.
Adaptor
I
Material: 1.4401 (A4) stainless steel
Fits MP-MXRI / MP-MRI / MP-MR pipe rings with M16 or M12 boss and MFP-GP-R M16 and
MFP-GP-R 3/4″ base plates
LI
Outside
thread
[A]
M12
M16
Inside
thread
[I]
/4″
/4″
3
3
Wrench
size
[SW]
Length
L
[mm]
LI
[mm]
Outside
dia.
[mm]
Package
contents
(pcs)
Ordering
designation
Item no.
LA
[mm]
30
30
39.5
43.5
11.5
15.5
28
28
34
34
25
25
MGA-R 3/4″ IG / M12 AG
MGA-R 3/4″ IG / M16 AG
376256
376257
L
LA
A
MGL 2-R base plate «light» (A5), metric two-hole version
d
Version: Spot-welded connection boss
d
[mm]
H
[mm]
a×b
[mm]
FZrec
[kN]
Package
Ordering
cont. (pcs) designation
Item no.
M8
11
9×16
1.9
10
246927
MGL 2-R-M8
3
H
54
80
MGS 2-R base plate «standard» (A5),
d
metric two-hole version
Version: Spot-welded connection boss
d
[mm]
H
[mm]
M10 14
M12 16
M16 20
a×b
[mm]
FZrec
[kN]
11×18 2.0
11×18 3.0
11×18 3.5
11 x 18
40
4
Package
Ordering
cont. (pcs) designation
Item no.
10
10
10
246931
247762
246932
MGS 2-R-M10
MGS 2-R-M12
MGS 2-R-M16
Suitable anchor systems:
HKD-SR
HST-R
Hilti HIT
HVZ-R / HVA-R
page 54
9 x 16
30
H
85
120
General safety information
General safety information
As the Hilti MQ hot-dip galvanised/stainless steel system forms a technical unit, this system must not be used for purposes other
than those recommended by Hilti or in combination with products that are not suitable for the purpose.
Deviation from the loads warranted by Hilti may result if the system is used in combination with products not recommended by Hilti.
When the MN hot-dip galvanised/ stainless steel system is combined with products from the MQ hot-dip galvanised/stainless steel
system, the load values for the MQ hot-dip galvanised/stainless steel system apply exclusively.
Hilti accepts no liability whatever for damage or loss that could result from failure to observe this safety information.
page 55
Hilti. Outperform. Outlast.
56
Hiltipage
Corporation
| 9494 Schaan | Liechtenstein | P +423-234 2111 | F +423-234 2965
Hilti = registered trademark of Hilti Corp., Schaan | W 3207 0808 0-en | 1 Printed in Liechtenstein | © 2008 | Right of technical and programme changes reserved S. E. & O.
Download