Outdoor Lighting
Perimashield® Wallpacks
PGS3A/PGS-B • PRS3
Perimashield®
Wallpacks PGS3A/PGS-B • PRS3
The Perimashield family provides a performance wallpack with a shielded
light source. These units give the specifier a mid-point between non-cutoff
refractor wallpacks and full cutoff, downlight wallpacks.
Excellent for commercial or industrial applications when lamp shielding is
desired to eliminate the lamp arch tube visibility from a distance.
Refractor Selection
Wire Access
• Side 1/2” hubs for feed thru surface conduit
• Separate 1/2” hub for field installation of button
photo control
• Vandal resistant polycarbonate PRS (150watt or less)
• Borosilicate glass PGS (70-400watt)
Horizontal Lamp Design
•
•
•
Rugged Construction
Lamps included
•
Adjustable forward beam
Perimashield beam coverage is typically four mounting •
heights lateral and two mounting heights forward
•
Perimashield® PRS3
Die cast aluminum housing provides rigid mounting and heat dissipation for cooler operation and long life
Bronze finish standard, alternative finishes are available with price adder and extended delivery
Rear access to recessed junction box
POLYCARBONATE
Vandal Resistant Refractor/Door Assembly
• One-piece injection molded UV stabilized polycarbonate
• Engineered for spacings up to 4 times mounting heights
with typical 2 times mounting height forward beam
coverage
• Dark Bronze finish is painted on inside of door so projectile
impacts will not mar the appearance
• Four point door compression provides seal against
moisture and insects, certified for wet locations
• HubbellGard™ fasteners have external coating to prevent chemical interaction in the cast aluminum housing, allows
easy service and eliminates screw “Freezing” or “Bonding”
• New improved bottom hinges have been strengthened for durability and years of maintenance-free operation
Polycarbonate Refractor
One-piece front, impact/vandal
resistant, Polycarbonate lens.
2
Secure Mounting
Nine inch centered knockouts for
rigid mounting. Center wire access for
wiring to recessed junction boxes.
Heavy Duty Hinges
Reinforced two-piece hinge design
provides increased strength – resists
shipping/installation/maintenance
damage.
1/2"Conduit Hubs
Feed-through 1/2” hubs provided on
all units for surface conduit wiring.
www.hubbelloutdoor.com
GLASS SHIELDED WALLPACK
Perimashield® PGSA3
Refractor/Door Assembly
• Borosilicate clear glass lens provides greater heat resistance
• Wattage range 70-150watt PGSA3, 250-400watt PGS-B
• Engineered for spacings up to 4 times mounting heights
with typical 2 times mounting heights forward beam coverage
• Glass is silicone sealed to die cast aluminum door
• 800 series polyester powder paint provides rugged, lasting
appearance. Multiple finish selections available
• Four point door compression closure provides seal against
moisture and insects, certified for wet locations
•
HubbellGard™ fasteners have external coating to prevent chemical interaction on the cast aluminum housing,
allows easy service while eliminating screw “Freezing” or “Bonding”
• New improved bottom hinges have been strengthened for durability and years of maintenance free operation
Button Photo Control Accessory
Photocontrol hub provided for easy field
installation on top for PRS3/PGSA3 on
side for PGS-B.
www.hubbelloutdoor.com
Adjustable Lamp Shielding
Adjustable socket, allows increased
shielding in the field.
Egress Lighting Option
EM socket available as option on
all units for egress lighting. Double
contact bayonet socket powered by
remote source (by others).
Glass Refractor
Borosilicate glass lens has greater
heat resistant – needed for higher
wattages.
3
Perimashield® PGSB
HIGH WATTAGE GLASS SHIELDED WALLPACK
• Clear borosilicate glass lens allows shielded
lamp to direct main beam downwards. Cast
aluminum door supports glass, seals to housing
gasket with twin HubbellGard® fasteners.
Door is hinged, can be easily removed for
greater access.
• Shielded lamp above a specular hammertone
reflector provides beam control.
• Cast aluminum back housing. Mounts over recess
wiring boxes or allows feed-thru wiring through
1/2” side hubs. Side hub provided for field installation of PBT photocontrol.
• Mogul base lamp included.
Weight
lbs. (kg)
Large Size - Mogul Base Socket - Mogul Base Lamp Included
Pulse Start Metal Halide
250
Quad/PS (HPF)
350
Quad/PS (HPF)
High Pressure Sodium
250
Quad/CWA (HPF)
29 (13.1)
32 (14.5)
Wattage
PGS-B250S-128-1
• CSA certified to UL 1598 for use in wet locations.
Voltage/Ballast
Catalog Number
PGS-B250P-128-1
PGS-B350P-128-1
• Dark bronze powder paint finish is standard,
other finishes available with price adder,
consult factory.
PGS-B400S-128-1
400
31 (14.1)
Quad/CWA (HPF)
35 (15.9)
Note Units are Quad-Tap®. For Tri-Tap® (120/277/347V) change 8 to 6. For 480V change 8 to 5. Standard finish is dark bronze. For 50Hz ballastry, consult factory.
Note 50Hz 220/240V available.
Accessories - Order Separately
Options - Add Suffix
-EM
-QSS
PBT-1
PBT-234
PG-PS1
PG-WG1
PVL3V
Double contact socket for remote power (less lamp)
Quartz restrike system including relay (less lamp)
(Double contact bayonet socket)
1
Guard and shield can be used on the same fixture
Replacement Parts
Dimensions
PGS-B 800-3398-0104
Lens Door Front, Bronze
C
A
B
D
5
Photocontrol, button type, 120V
Photocontrol, button type, 208, 240, 277V
Polycarbonate shield for refractor
Wire guard for refractor
Full Cutoff Visor, formed aluminum, Bronze finish
A
14 7/8”
B
15”
C
9 7/8”
D
4 3/8”
(378 mm)
(381 mm)
(251 mm)
(111 mm)
www.hubbelloutdoor.com
Perimashield® PRS3\PGSA3
•
PRS3- One-piece polycarbonate lens, internally painted for lasting appearance. PGSA3 has cast aluminum door with Borosilicate glass lens and internal metal shield. Two HubbellGard® fasteners provide weather tight seal to housing. Heavy duty door hinges attach removable lens assembly for easy access.
• Specular hammertone main reflector provides efficiency and uniformity.
•
Housing is die cast aluminum for rugged mounting and heat dissipation. 1/2” feed-thru hubs provided and top photocontrol hub for field installation. Standard mount is over recessed wiring boxes.
• Ballasts are all HPF – QuadTap® is standard.
Catalog Number
• Lamp is included and fixtures have an
adjustable socket to increase source shielding if
desired. Max wattage is 150PS or 150HPS. 50HZ
ballastry is available.
PRS3
• CSA certified to UL 1598 for use in wet locations
Wattage
Weight
lbs. (kg)
Voltage/Ballast
Polycarbonate Front - Medium Base Socket
Pulse Start Metal Halide
70
Quad/PS (HPF)
100
Quad/PS (HPF)
150
Quad/PS (HPF)
High Pressure Sodium
70
Quad/AL (HPF)
100
Quad/AL (HPF)
150
Quad/AL (HPF)
PRS3-070P-18-BZ-L
PRS3-100P-18-BZ-L
PRS3-150P-18-BZ-L
PRS3-070S-18-BZ-L
PRS3-100S-18-BZ-L
PRS3-150S-18-BZ-L
17 (7.7)
18 (8.2)
18 (8.2)
16 (7.3)
17 (7.7)
17 (7.7)
Note PRS3 is only available with Bronze finish. Units include medium base lamp. Units are Quad Tap® 120, 208, 240, 277V. For Canadian Tri Tap change 8 to 6. For 50hz ballast consult factory.
Catalog Number
Wattage
Glass Front - Medium Base Socket
Pulse Start Metal Halide
70
100
150
High Pressure Sodium
70
100
150
PGSA3-070P-18-BZ-L
PGSA3-100P-18-BZ-L
PGSA3-150P-18-BZ-L
PGSA3-070S-18-BZ-L
PGSA3-100S-18-BZ-L
PGSA3-150S-18-BZ-L
Voltage/Ballast
Weight
lbs. (kg)
Quad/PS (HPF)
Quad/PS (HPF)
Quad/PS (HPF)
22 (10)
22 (10)
23 (10.4)
Quad/AL (HPF)
Quad/AL (HPF)
Quad/AL (HPF)
18 (8.2)
18 (8.2)
18 (8.2)
Note Units are Quad-Tap®. For Tri-Tap® (120/277/347V) change 8 to 6. For 480V change 8 to 5. Standard finish is dark bronze. For alternative finishes and price adder consult factory.
For 50Hz ballastry, consult factory.
Options - Add Suffix
-EM
-QSS
-RS
Accessories - Order Separately
Double contact socket for remote power (less lamp)
Quartz restrike system including relay (less lamp)
(Double contact bayonet socket)
Hot restrike system, quickly restores main lamp output
after power outage. 150watt max, HPS only.
PBT-1
PBT-234
PG-PS1
PG-WG1
PVL3V
1
Photocontrol, button type, 120V
Photocontrol, button type, 208, 240, 277V
Polycarbonate shield for refractor
Wire guard for refractor
Full Cutoff Visor, formed aluminum, Bronze finish
Guard and shield can be used on the same fixture
Replacement Parts
Dimensions
PRS
200-0225-9904 Lens Door Front, Bronze
PGSA3 800-3398-0104 Lens Door Front, Bronze
C
A
B
D
www.hubbelloutdoor.com
A
14 7/8”
B
15”
C
8”
D
4 3/8”
(378 mm)
(381 mm)
(203 mm)
(111 mm)
4
Outdoor Lighting
701 Millennium Boulevard
Greenville, SC 29607
Tel: 864.678.1000
Fax: 864.678.1417
www.hubbelloutdoor.com
Hubbell Outdoor Lighting’s Comprehensive Wallpack Lighting Offering
Lighting Solutions for Every Application
Laredo Family Full Cutoff - No Uplight Strict Lighting Codes
Laredo LCC LED & LCC
Laredo LMC
Laredo LLC
Perimashield® Family Shielded Output – Limited Uplight
PRS3
PGS-B
PGSA3
Perimaliter® Family Non-Cutoff – Refractor Wallpacks for Greater Ambient/Area Lighting
PVL3
PGM3
PGL
Hubbell Lighting Inc. Distinguished Lighting Brands
Alera Lighting
Architectural Area Lighting
Beacon Products
Columbia Lighting
Compass Products
Devine Lighting
Dual-Lite
HomeStyle Lighting
Hubbell Outdoor Lighting
Hubbell Industrial Lighting
Kim Lighting
Kurt Versen
Paragon Lighting
Prescolite
Progress Lighting
Precision Lighting
Security Lighting
Spaulding Lighting
Sportsliter Solutions
Sterner Lighting Systems
Thomas Research Products
Thomasville Lighting
Whiteway
Varon Lighting Group
For more information visit our web site: www.hubbell-ltg.com
HOPGS-PRS 4/09
Due to our continued efforts to improve our products, product specifications are subject to change without notice.