D E S C R I P T I O N
The CC2 Contractor's Choice Emergency Lighting Unit is an economic, yet attractive, alternative to standard two headed emergency lighting units. All components snap together to facilitate installation in 2 minutes or less. Field adjustability is not sacrificed for price, both lighting heads have full horizontal and vertical adjustability. The CC2 Contractor's Choice is ideal for applications which demand the minimum product cost without sacrificing adjustability, dependability, or aesthetics.
Type
Date
S P E C I F I C AT I O N F E AT U R E S
E l e c t ro n i c
- Dual Voltage Input 120/277 VAC,
60 Hz, Isolation Transformer
- Line-latching
- Solid-state Voltage Limited
Charger
- Solid-state Switching
- Low-Voltage Disconnect
- Brownout Circuit
- Overload/Short Circuit
Protection
- Test Switch/Power
Indicator Light
B a tte r y
- Sealed Lead Calcium,
Recombination
- Maintenance-free, Long-life
- Full Recharge Time,
24 hrs. (max.)
- Polarized Battery Terminals
H o u s i n g C o n s t ru c t i o n
- Designed for Under
2-Minute Installation
- Housing is Tethered to Mounting
Plate to Facilitate Installation
- Injection Molded, Color Stable,
High Impact UL-94-5V rated
Polycarbonate Housing &
Mounting Plate
- Designer White Textured Finish
- Cutouts Provided in Housing for Surface Conduit Attachment
- Suitable For Wall or Ceiling
Mount Applications
- Universal J-Box Mounting
Pattern
- Keyhole Mounting Slots
C o d e C o m p l i a n c e
- UL 924 Listed
- Damp Location Listed Standard
- Life Safety NFPA 101
- Nom Certified
- NEC/OSHA
- Most State and Local Codes
Wa rra n t y
- Unit: 1-year
- Battery: 5-year pro-rata
H e a d / L a m p Da t a
- Two Heads Standard
- PAR 36 Type
- Glare-Free Lens
- Fully Adjustable Lamp Housing
- High Impact Polycarbonate
- Matches Housing Finish
- Optional square and MR16 heads available
CC2
P O LYC A R B O N AT E
C O NT R AC TO R ' S C H O I C E
S E A L E D L E A D
C A L C I U M B AT T E RY
E M E R G E N CY L I G H T I N G
E L E C T R I C A L R AT I N G S
Model
CC2
CC22146
CC2MRT
CC2SQ
R a t e d W a t t a g e to 87 1/2% of Rated D.C. Voltage
DC Voltage 1 1/2 Hours
6
6
6
6
12
12
12
12
L a m p I n f o r m a t i o n
Type Wattage
Incandescent
Krypton
MR16
Incandescent
5.4
5.4
5.0
5.4
Number
029121
029146
029139
029121
ORDERING INFORMATION
Series
CC2
CC2347
Options
BK
= Black
1, 2
MRT = MR16 Lamp Heads 3
SQ = Square Heads 4
V = Voltmeter
CSK120 = Cord Set (120 VAC)
Accessories
Mounting Kit
5
1BRWH = Mounting Brackets (2) White
Protective Housing
WG1 = Wire Guard
VS1
= Polycarbonate Vandal Shield
VS1WP = Weather Resistant Vandal Shield
Notes: 1 Add as a suffix. 2 Consult your Cooper Lighting Representative for alternate lamps and additional options. 3 MR16 heads (5W Standard). 4 Square heads (5.4W
Standard). 5 Order separately.
E N E R G Y D ATA
CC2
Input Current (Max ):
120V= 12A
277V= 05A
CC2347
Input Current (Max ):
120V= 12A
347V= 01A
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes
ADX040996 pc
2011-07-05 10:49:09
2011-07-05 16:07:06

P H OTO M E T R I C S
29-121
.
For Standard Fixture: CC2
18.5' Spacing Illuminance Values
(Fc)
Average=1.01
Maximum=3.3
Minimum=0.2
Avg/Min
Ratio=5.05
Max/Min
Ratio=16.50
CC2 SERIES
N OT E S
The “Rule of Thumb” spacing guidelines are designed to achieve 1 foot-candle average and 0.1 foot-candle minimum with a 40:1 maximum/minimum ratio. The corridor used is 100 feet long, 9-foot ceiling with a 6-foot wide walkway and 3-foot path of egress. The reflectances are 80% ceiling, 50% walls and 20% floors. The fixture mounting height is 8.5 feet.
Cooper Lighting assumes no responsibility for local requirements or specific project variables. This is a guideline to be used as a design aid, not as guarantee of any code compliance.
T E C H N I C A L DATA
L a m p s
Designed specifically for emergency lighting applications, the PAR 36 sealed beam type design insures optimum glare-free trapezoidal light distribution along with horizontal and vertical adjustment by rotating the lens within the housing.
H o u s i n g
The subtly detailed Model CC2 housing is constructed of flame and impact resistant UL
94-5V rated polycarbonate in a color stable designer white finish. All electrical components are securely attached in the housing and prewired for fast AC connection. The housing is tethered to the mounting plate freeing both hands to make electrical connections. Once complete, the housing simply snaps on to the hinged mounting plate with two integral, securely locking tabs making the Model CC2 suitable for wall or ceiling mount applications.
The mounting plate has keyhole mounting slots and a universal mounting pattern for quick, efficient installation.The housing contains hidden tearouts for surface conduit attachment.
S o l i d - S t a te C h a rge r
Supplied with a 120/277 VAC, voltage regulated solid-state charger. Immediately upon restoration of AC current after a power failure, the charger provides a high charge rate. The charge circuit reacts to the condition of the battery and alters the rate of charge in order to maintain peak battery capacity and maximize battery life. Solid-state construction recharges the battery following a power failure in accordance with UL 924.
O ve rl o a d a n d S h o rt - C i rc u i t P ro te c t i o n
The solid-state overload monitoring device in the DC circuit disconnects the lamp load from the battery should excessive wattage demands be made and automatically resets when the overload or short-circuit is removed. This overload current protective feature eliminates the need for fuses or circuit breakers for the DC load.
relays. The switching circuit is designed to detect a loss of AC voltage and automatically energizes the lamps. Upon restoration of the AC power, the emergency lamps will switch off and the charger will automatically recharge the battery.
L ow - Vo l t a ge D i s c o n n e c t
When the battery’s terminal voltage falls below
80% of the rated voltage, the low-voltage circuitry disconnects the lighting load. The disconnect remains in effect until normal utility power is restored, preventing deep battery discharge.
Te s t Sw i t ch / Powe r I n d i c a to r L i g h t
Conveniently located combination Test
Switch/Power Indicator Light allows for manual verification of proper operation of the transfer circuit and emergency lamps.
L i n e - L a t ch e d
Sure-Lites’ line-latched electronic circuitry makes installation easy and economical. A labor efficient AC-activated load switch prevents the lamps from turning on during installation to a non-energized AC circuit. Line-latching eliminates the need for a contractor’s return to a job site to connect the batteries when the building’s main power is permanently turned on.
B row n o u t C i rc u i t
The brownout circuit in Sure-Lites units monitors the flow of AC current to the unit and activates the emergency lighting system when a predetermined reduction of AC power occurs.
This dip in voltage will cause most ballasted fixtures to extinguish causing loss of normal lighting even though a total power failure has not occurred.
S o l i d - S t a te Tra n s fe r
The unit incorporates a solid-state switching transistor which eliminates corroded and pitted contacts or mechanical failures associated with
S e a l e d L e a d C a l c i u m B a tte r y
The fully sealed, long-life, maintenance-free lead calcium battery is ideal for emergency lighting applications. These recombinant cycle batteries typically provide eight to ten years of life and may be operated in any position.
Wa rra n t y
All Sure-Lites units are backed by a firm oneyear warranty against defect in material and workmanship (excluding lamps). Maintenancefree, long-life, sealed lead calcium batteries carry a five-year pro-rata warranty.
Specifications and dimensions subject to change without notice.
Sure-Lites • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770 486 4800 • FAX 770 486 4801
ADX040996 pc
2011-07-05 10:49:09
2011-07-05 16:07:06