This manual has been produced to serve as a guide for users of the EZ-Clone cloning machine and
key application guide for the transponder key program. It is essential that you follow all the steps
required to program a new key and select the correct transponder key per the application guide
for the key to operate correctly.
CONTENTS:
page
EZ-Clone and Ez-Clone Plus User Guide......................................................................4 - 5
EZ-Clone Plus with Snoop User Guide..........................................................................6 - 9
Error Messages When Programming with Snoop ..........................................................10
Transponder Key Application Guide .......................................................................11 - 18
On-Broad Programming (OBP) Instructions ............................................................19 - 20
WHAT IS A TRANSPONDER KEY AND HOW DOES IT WORK?
Transmitter + Responder = Transponder Key. When placed in a vehicle’s ignition and the ignition
is turned “ON” a RF signal is sent to the transponder key which energizes the key. The key sends back
a code to the control module. The control module checks the code against approved codes in
memory. Confirmation is then sent to the engine control module and if the code is correct the
vehicle is permitted to start.
WHAT IF KEY DOES NOT WORK?
If the key is incorrectly programmed, a non-transponder or incorrect transponder key blank is used,
the car will not start. If the key unlocks the doors/trunk, but will not start the car, then the key is cut
correctly, the issue is with the transponder. If the key you selected and programmed through the EZ
Clone does not start the vehicle on the first try do not try it again. Recheck that the correct key was
selected and if so try to program the key again. Repeated attempts to start a vehicle with an
incorrect key may disable the engine control module and temporarily immobilize the vehicle.
Before starting programming process remove customer’s key from key ring or key FOB as these
items may interfere with the programming process.
The Hillman Group provides this booklet as an information source and does not assume any liability for claims, cost or damages
resulting from correct or misuse of the information provided. The Hillman Group cannot be held responsible for
typographical errors, outdated or erroneous information contained in this booklet.
For technical assistance call 1.800.800.4900 ext. 4001
3
ON/OFF Switch
Display
Key Slot
Read
Write
PROGRAMMING - EZ-CLONE AND EZ CLONE PLUS
If the EZ-Clone is not already turned on do so by
flipping the black ‘Rocker Switch’ on the back of
the machine. If screen does not display check to
make sure power cord is plugged into back of
EZ- Clone and at outlet.
STEP 2
The reading operation begins. The display shows:
READING IN PROGRESS
WAIT
READING THE KEY:
STEP 1
Remove customer’s key from key ring or key FOB.
Then insert the customer’s key into the key slot and
press the READ button.
NOTE: Customer’s key must be removed from key
ring or key FOB before inserting into key slot or the
EZ Clone may not be able to read key.
INSERT ORIGINAL KEY
READ
4
STEP 3
When the customer’s key has been read successfully, the display shows. The customer’s key can now
be removed.
READING SUCCESSFUL
REMOVE KEY
For technical assistance call 1.800.800.4900 ext. 4001
STEP 4
STEP 6
Once the customer’s key has been removed,
depending on the type of transponder key one of
the below screens will display:
If the INSERT BLANK KEY screen displays, proceed
to WRITING THE KEY.
Once the writing process has begun, the display
shows:
WRITING IN PROGRESS
WAIT
INSERT BLANK KEY
BACK
WRITE
If the customer’s original key is encrypted, EZ-Clone
displays the following two screens:
STEP 7
When the key has been written successfully, the
display shows:
KEY DATA PROCESSING
WAIT
OPERATION COMPLETED
REMOVE KEY
KEY DATA PROCESSING
STOP
00/99
Once data has been processed the INSERT BLANK
KEY screen displays. Then proceed to WRITING THE
KEY.
STEP 8
The key can now be removed and the below
screen will display. If you want additional copies of
the key, press WRITE and follow the on screen steps.
If no additional copies are needed, press READ.
WRITING THE KEY:
OTHER COPIES
NO
YES
STEP 5
Select the correct key blank from the Transponder
Key Application Guide and insert it into the key slot
and then press the WRITE button.
INSERT BLANK KEY
BACK
WRITE
STEP 9
The key can now be cut on the key machine.
For technical assistance call 1.800.800.4900 ext. 4001
5
ON/OFF Switch
Display
Key Slot
SNOOP
Antenna
Read
SNOOP
Write
PROGRAMMING - EZ-CLONE PLUS with SNOOP
To program these keys you must have either the EZ
Clone Plus or EZ Clone with Plus Box and the SNOOP.
The keys cannot be programmed on a standard EZ
Clone.
Programming a new key requires that the vehicle
be present and the operator will need to go to the
vehicle to complete some steps.
STEP 2
The reading operation begins.
READING IN PROGRESS
WAIT
Before beginning check the application guide to
see if a key is available for the customer’s vehicle.
READING THE ORIGINAL KEY AND
INITIALIZING SNOOP:
STEP 3
STEP 1
Remove customer’s key from key ring or key fob.
Insert customer’s key into key slot and press READ.
When reading process is completed the display
shows:
REMOVE KEY
INSERT ORIGINAL KEY
READ
6
For technical assistance call 1.800.800.4900 ext. 4001
STEP 5
Once the SNOOP has been removed the display
will show:
WAITING SNOOP DATA
BACK
CONTINUE
NOTE: Do not press WRITE to continue at this time.
STEP 4
When the key has been removed instructions are
given to insert the SNOOP. Insert Snoop and
antenna into the key slot and press WRITE.
READING DATA FROM VEHICLE:
To perform the below steps the SNOOP antenna
must be placed around the customer’s key and the
key with the SNOOP placed in the vehicle ignition.
INSERT SNOOP
CONTINUE
NOTE: When WRITE is pressed the machine makes
some operational checks on the SNOOP. If it finds
data from a previously copied key the display may
display. To continue, press WRITE.
STEP 6
SNOOP INCOMPL DATA
CONTINUE
Place the SNOOP antenna around the customer’s
key head as shown. The antenna should be placed
in the middle of the key head.
OR
RESET SNOOP?
NO
YES
Press WRITE and the screen will display:
PLEASE WAIT
When completed the display will show:
REMOVE SNOOP
STEP 7
Take key with SNOOP attached to the vehicle and
follow the steps on the next page.
For technical assistance call 1.800.800.4900 ext. 4001
7
4 Place key in ignition and turn to the ON
position (Do not start).The LED “1” on SNOOP
will flash for a few seconds to indicate the first
data reading operation has been completed.
4 When LED “1” goes out, turn key to the OFF
position and remove the key.
4 Wait 10 – 20 seconds or until the immobilizer
warning light starts to flash, if applicable.
Then insert key back into the ignition.
4 Turn the key to ON position (Do not start). LED
“1” on SNOOP will go on and LED “2” will flash
for a few seconds to indicate that the second
data reading operation has been successful.
STEP 8
Remove customer key from SNOOP.
Display screen should be reading:
WAITING SNOOP DATA
BACK
CONTINUE
Press WRITE and the screen will display:
INSERT SNOOP
CONTINUE
4 Remove the key from ignition. Proceed to
Step 8.
The SNOOP now has the necessary data to transmit
to the EZ Clone Plus for a copy of the original key.
You can check that the process was done
correctly by placing the key back into the ignition
with the SNOOP still attached and turning to the
ON position. If both LED lights come on it indicates
that all the necessary data has been copied.
Insert the SNOOP (without customer’s key) into key
slot on EZ Clone Plus. Press WRITE.
The EZ Clone Plus will read and check the data
from the SNOOP. If all is okay the screen will display:
INSERT ORIGINAL KEY
CONTINUE
If there are problems during the data logging (LEDs
do not go on) try:
4 Place the SNOOP antenna in such a position
that when the key is inserted into the ignition
the antenna can be moved away or closer to
the ignition housing.
4 Wait longer than 20 seconds before reinsert
key into ignition. In some cases the wait could
be up to a couple minutes.
4 Closing and opening the vehicle using the
key fob.
READING AND COPY ORIGINAL KEY:
STEP 9
Insert the customer’s original key and press READ.
The screen displays:
4 Starting the engine for a few seconds.
NOTE: On some vehicles data is downloaded by
simply inserting the key into the starter. In such
cases the SNOOP LEDs illuminate. In these circumstances just insert the remove and the key in the
ignition twice.
8
KEY DATA PROCESSING
WAIT
XX/99
For technical assistance call 1.800.800.4900 ext. 4001
The number shown from 00 to 99 indicates that
calculation is taking place. The operation could
take from a few seconds to 3 minutes. Do not
remove customer’s key from machine. At the end
of the calculating process the machine will ask you
to remove the key.
STEP 12
After a few seconds you will be asked if other
copies are to be made of the key with the same
code.
OTHER COPIES
NO
YES
REMOVE KEY
Press READ to continue if no other copies are
needed. Remove key
Press WRITE to make another copy and follow
screens.
STEP 10
When the key has been removed the screen will
display:
INSERT EHP KEY
CONTINUE
STEP 13
The key can now be cut on the key machine.
Select the correct transponder key from the
application guide and insert into key slot. Press
WRITE. The new transponder key is checked to see
if it is compatible with the type of transponder read
previously. If everything is okay the screen will
display:
STEP 14
Take key to the customer’s vehicle and make sure
it works.
WRITING IN PROGRESS
WAIT
STEP 11
Once the writing is completed the screen will
display:
OPERATION COMPLETED
You can now remove the key.
For technical assistance call 1.800.800.4900 ext. 4001
9
ERROR MESSAGES WHEN PROGRAMMING WITH THE SNOOP
During the reading and copying stage for the
original key, and during the SNOOP initialization
and test stages, the EZ Clone Plus machine makes
checks to ensure that the calculations and SNOOP
work correctly. Below are some possible errors that
may occur during the programming process and
solutions.
SNOOP DATA WRONG
CONTINUE
Anomaly: During the ‘Reading data from vehicle’
steps when the SNOOP is reading data from the
vehicle the data needed to make a copy has
not been properly read.
Solution: Repeat the entire process.
CHECK POSITION
CONTINUE
Anomaly: SNOOP has not been found by the EZ
Clone Plus antenna.
Solution: Check the position of SNOOP on the
machine antenna, press WRITE to continue.
KEY INCOMPATIBLE
CONTINUE
Anomaly: Starting at Step 9 either the original key
is different or you are trying to copy the original
key onto a key that is not a Philips Crypto key.
Solution: Insert the original key used in Step 1 and
continue, or insert the correct Philips Crypto key.
REPLACE SNOOP
BACK
LAST WRITING FOR EHP
CONTINUE
Anomaly: The battery power is low.
Solution: Replace the SNOOP battery.
SNOOP DATE INCOMPL
BACK
Anomaly: During the ‘Reading data from vehicle’
steps when the SNOOP is reading data from the
vehicle the data needed to make a copy has
not been found.
Solution: Repeat process starting at Step 6
(page 7).
10
Cause: EK3P keys can be re-programmed only
3 times. This message indicates that the current
programming operation is the last one possible
EHP NOT WRITABLE
CONTINUE
Anomaly: EK3P keys can be re-programmed only
3 times. This message indicates that the key is no
longer programmable.
Solution: Insert a new EK3P key.
For technical assistance call 1.800.800.4900 ext. 4001
HILLMAN TRANSPONDER KEY APPLICATION GUIDE
ACURA
Years
Complete Key
Blade Only
Head Only
CL
CSX (Canada only)
EL (Canada only)
Integra
MDX
MDX
NSX
RDX
RL
RL
RSX
TL
TL
TL
TSX
TSX
ZDX
1998-2003
2006-2011
2003-2005
2000-2001
2001-2006
2007-2013
1997-2005
2007 - 2011
1996-2004
2005-2010
2002-2006
1999-2003
2004-2006
2007-2013
2004-2007
2008-2013
2010-2012
HD106-PT5
HO03-EK3P
HO01T5
HD106-PT5
HD106-PT5
HO03-EK3P
HD106-PT5
HO03-EK3P
HD106-PT5
HD111-EK3P
HD106-PT5
HD106-PT5
HD111-EK3P
HO03-EK3P
HD111-EK3P
HO03-EK3P
HO03-EK3P
N/A
S-HO03
N/A
N/A
N/A
S-HO03
N/A
S-HO03
N/A
U-HD111
N/A
N/A
U-HD111
S-HO03
U-HD111
S-HO03
S-HO03
N/A
EH3P
N/A
N/A
N/A
EH3P
N/A
EH3P
N/A
EH3P
N/A
N/A
EH3P
EH3P
EH3P
EH3P
EH3P
Programming
Comments
BUICK
Years
Complete Key
Blade Only
Head Only
Programming
Comments
Allure (Canada)
Enclave
Enclave
LaCrosse/Allure
LaCrosse/Allure
LeSabre
Lucerne
Lucerne
Park Avenue
Rainier
Regal
Rendezvous / Ultra
Terreza
Terreza
2010-2012
2007-2013
2007-2013
2005-2009
2010-2013
2000-2005
2006-2011
2006-2011
1997-2005
2003-2007
2011 - 2013
2002-2007
2005-2006
2005-2007
HU100-EK3P
B111-PT
B111-EK3P
B107-PT5
HU100-EK3P
B99-PT5
B111-PT
B111-EK3P
B97-PT5
B99-PT5
HU100-EK3P
B99-PT5
B97-PT5
B107-PT5
V-HU100
N/A
R-B111
N/A
V-HU100
N/A
N/A
R-B111
N/A
N/A
V-HU100
N/A
N/A
N/A
EH3P
N/A
EH3P
N/A
EH3P
N/A
N/A
EH3P
N/A
N/A
EH3P
N/A
N/A
N/A
Snoop Required
On-Board Programming (A or G) p.19
Snoop Required
Sidewinder Key
Snoop Required
Sidewinder Key
Snoop Required
Sidewinder Key
Programming
Comments
Snoop Required
Sidewinder Key
Snoop Required
Sidewinder Key
Snoop Required
Sidewinder Key
Snoop Required
Snoop Required
Snoop Required
Snoop Required
Snoop Required
Snoop Required
Sidewinder Key
Sidewinder Key
Sidewinder Key
On-Board Programming (A or G) p.19
Snoop Required
CADILLAC
Years
Complete Key
Blade Only
Head Only
CTS
CTS/CTS-V w/o Prox
CTS/CTS-V w/o Prox
Catera
DeVille
DTS
DTS
Escalade
2002-2003
2008-2013
2008-2013
1997-1999
2000-2005
2006-2011
2006-2011
2007-2013
B99-PT5
B111-EK3P
B111-PT
HU46T2
B99-PT5
B111-PT
B111-EK3P
B111-PT
N/A
R-B111
N/A
N/A
N/A
N/A
R-B111
N/A
N/A
EH3P
N/A
N/A
N/A
N/A
EH3P
N/A
Escalade
2007-2013
B111-EK3P
R-B111
EH3P
Snoop Required
Key interference may occur if vehicle
has column mounted shifting.
Seville
SRX
SRX
SRX
STS
STS
1998-2004
2007-2009
2008-2009
2010-2011
2004-2013
2004-2012
B99-PT5
B111-PT
B111-EK3P
HU100-EK3P
B111-EK3P
B111-PT
N/A
N/A
R-B111
V-HU100
R-B111
N/A
N/A
N/A
EH3P
EH3P
EH3P
N/A
On-Board Programming (A or G) p.19
Snoop Required
Snoop Required
Snoop Required
On-Board Programming (A or G) p.19
Sidewinder Key
Years
Complete Key
Blade Only
Head Only
Programming
Comments
2007-2013
2007-2013
2004-2010
2010-2013
2006-2010
2006-2010
2011-2013
2004-2007
2007-2009
2007-2009
2010-2013
2008-2013
2008-2013
2006-2012
B111-PT
B111-EK3P
DW04RT5
HU100-EK3P
B111-PT
B111-EK3P
HU100-EK3P
DW05T5
B111-PT
B111-EK3P
HU100-EK3P
B111-PT
B111-EK3P
B111-PT
V-HU100
N/A
R-B111
N/A
V-HU100
N/A
N/A
R-B111
N/A
N/A
V-HU100
N/A
N/A
N/A
N/A
EH3P
N/A
EH3P
N/A
EH3P
EH3P
N/A
N/A
EH3P
EH3P
N/A
EH3P
N/A
On-Board Programming (A or G) p.19
Snoop Required
CHEVROLET
Avalanche
Avalanche
Aveo, Aveo 5
Camaro
Cobalt
Cobalt
Cruze
Epica
Equinox
Equinox
Equinox
Express
Express
HHR
Snoop Required
On-Board Programming (A or G) p.19
Snoop Required
Snoop Required
On-Board Programming (A or G) p.19
Snoop Required
Snoop Required
On-Board Programming (A or G) p.19
Snoop Required
Snoop Required
On-Board Programming (A or G) p.19
Snoop Required
On-Board Programming (A or G) p.19
Sidewinder Key
Sidewinder Key
Sidewinder Key
continued on next page
For technical assistance call 1.800.800.4900 ext. 4001
11
Years
Complete Key
Blade Only
Head Only
Programming
HHR
Impala
Impala
Malibu / Maxx
Malibu / Maxx
Monte Carlo
Monte Carlo
Silverado
2006-2012
2006-2013
2006-2013
2004-2013
2004-2013
2006-2007
2006-2007
2007-2013
B111-EK3P
B111-PT
B111-EK3P
B111-PT
B111-EK3P
B111-PT
B111-EK3P
B111-PT
R-B111
N/A
R-B111
N/A
R-B111
N/A
R-B111
N/A
Snoop Required
On-Board Programming (A or G) p.19
Snoop Required
On-Board Programming (A or G) p.19
Snoop Required
On-Board Programming (A or G) p.19
Snoop Required
Silverado
2007-2013
B111-EK3P
R-B111
Sonic
Suburban
2012-2013
2007-2013
HU100-EK3P
B111-PT
V-HU100
N/A
Suburban
Tahoe
Tahoe
2007-2013
2007-2013
2007-2013
B111-EK3P
B111-PT
B111-EK3P
R-B111
N/A
R-B111
Traverse
Traverse
Uplander
Uplander
Venture Van
Vivant
Volt
2009-2013
2009-2013
2007-2009
2005-2006
1999-2005
2004-2007
2011-2013
B111-PT
B111-EK3P
B99-PT5
B97-PT5
B97-PT5
DW05RT5
HU100-EK3P
N/A
R-B111
N/A
N/A
N/A
N/A
V-HU100
EH3P
N/A
EH3P
N/A
EH3P
N/A
EH3P
N/A
EH3P
EH3P
N/A
EH3P
N/A
EH3P
N/A
EH3P
N/A
N/A
N/A
N/A
EH3P
CHEVROLET continued
CHRYSLER
200
200
300
300
300
300
300
Aspen
Aspen
Cirrus
Cirrus
Concorde
Concorde
LHS
LHS
New Yorker
New Yorker
Pacifica
Pacifica
PT Cruiser
PT Cruiser
PT Cruiser
PT Cruiser
Sebring Convertible
Sebring Convertible
Sebring Convertible
Sebring Convertible
Sebring Coupe
Sebring Sedan
Sebring Sedan
Sebring Sedan
Sebring Sedan
Town & Country
Town & Country
Town & Country
Town & Country
Town & Country
Voyager
Voyager
DAEWOO
Lanos
Leganza
Nubira
12
On-Board Programming (A or G) p.19
Snoop Required
Snoop Required
On-Board Programming (A or G) p.19
Snoop Required
On-Board Programming (A or G) p.19
Snoop Required
On-Board Programming (A or G) p.19
Snoop Required
Comments
Key interference may occur if vehicle
has column mounted shifting.
Key interference may occur if vehicle
has column mounted shifting.
Key interference may occur if vehicle
has column mounted shifting.
Snoop Required
Years
Complete Key
Blade Only
Head Only
Programming
2011-2013
2011-2013
1999-2004
1999-2004
2005-2007
2005-2007
2008-2013
2007-2009
2007-2009
1999-2000
1999-2000
1998-2004
1998-2004
1999-2001
1999-2001
1998-2001
1998-2001
2004-2008
2004-2008
2001-2005
2001-2005
2006-2011
2006-2011
1998-2006
1998-2006
2007-2011
2007-2011
2001-2005
2001-2006
2001-2006
2007-2011
2007-2011
2001-2003
2001-2003
2004-2007
2004-2007
2008-2013
2001-2003
2001-2003
Y164-EK3P
Y164PT
Y-160PT
Y160-EK3
Y-164PT
Y164-EK3P
Y170-EK3P
Y-164PT
Y164-EK3P
Y-160PT
Y160-EK3
Y-160PT
Y160-EK3
Y-160PT
Y160-EK3
Y-160PT
Y160-EK3
Y-164PT
Y164-EK3P
Y-160PT
Y160-EK3
Y-164PT
Y164-EK3P
Y-160PT
Y160-EK3
Y-164PT
Y164-EK3P
MIT9-EK3
Y-160PT
Y160-EK3
Y-164PT
Y164-EK3P
Y-160PT
Y160-EK3
Y-164PT
Y164-EK3P
Y170-EK3P
Y-160PT
Y160-EK3
A-Y160
N/A
N/A
A-Y160
N/A
A-Y160
T-Y170
N/A
A-Y160
N/A
A-Y160
N/A
A-Y160
N/A
A-Y160
N/A
A-Y160
N/A
A-Y160
N/A
A-Y160
N/A
A-Y160
N/A
A-Y160
N/A
A-Y160
L-MIT9
N/A
A-Y160
N/A
A-Y160
N/A
A-Y160
N/A
A-Y160
T-Y170
N/A
A-Y160
EH3P
N/A
N/A
EH3
N/A
EH3P
EH3P
N/A
EH3P
N/A
EH3
N/A
EH3
N/A
EH3
N/A
EH3
N/A
EH3P
N/A
EH3
N/A
EH3P
N/A
EH3
N/A
EH3P
EH3
N/A
EH3
N/A
EH3P
N/A
EH3
N/A
EH3P
EH3P
N/A
EH3
Snoop Required
On-Broad Programming (F) p. 19
On-Broad Programming (F) p. 19
Years
Complete Key
Blade Only
Head Only
2000-2003
2000-2004
2001-2002
DW05RT5
DW05T5
DW04RT5
N/A
N/A
N/A
N/A
N/A
N/A
Comments
On-Broad Programming (F) p. 19
Snoop Required
Snoop Required
On-Broad Programming (F) p. 19
Snoop Required
On-Broad Programming (F) p. 19
On-Broad Programming (F) p. 19
On-Broad Programming (F) p. 19
On-Broad Programming (F) p. 19
On-Broad Programming (F) p. 19
Snoop Required
On-Broad Programming (F) p. 19
On-Broad Programming (F) p. 19
Snoop Required
On-Broad Programming (F) p. 19
On-Broad Programming (F) p. 19
Snoop Required
On-Broad Programming (F) p. 19
On-Broad Programming (F) p. 19
Snoop Required
On-Broad Programming (F) p. 19
On-Broad Programming (F) p. 19
Snoop Required
Snoop Required
On-Broad Programming (F) p. 19
Programming
For technical assistance call 1.800.800.4900 ext. 4001
Comments
DODGE
Avenger
Avenger
Caliber
Caliber
Caravan
Caravan
Caravan
Caravan
Caravan
Challenger
Charger
Charger
Charger
Dakota
Dakota
Dakota
Dakota
Dart
Durango Pick-up / SUV
Durango Pick-up / SUV
Durango Pick-up / SUV
Durango Pick-up / SUV
Durango Pick-up / SUV
Grand Caravan
Grand Caravan
Grand Caravan
Grand Caravan
Grand Caravan
Intrepid
Intrepid
Journey
Journey
Magnum
Magnum
Magnum
Neon
Neon
Nitro
Nitro
Ram 1500, 2500, 3500
Ram 1500, 2500, 3500
Ram 1500, 2500, 3500
Ram 1500, 2500, 3500
Ram 1500
Ram 2500, 3500
Ram 2500, 3500
Stratus Coupe
Stratus Sedan
Stratus Sedan
EAGLE
Vision
Vision
FORD
Cobra
Contour 2.51 V6
Contour V6 LX3
Crown Victoria
Crown Victoria
E Series
E Series
Edge
Edge
Escape
Escape Hybrid
Excursion
Expedition
Expedition
Expedition
Explorer
Explorer
Explorer
Explorer Sport
Years
Complete Key
Blade Only
Head Only
Programming
2008-2013
2008-2013
2007-2012
2007-2012
2001-2003
2001-2003
2004-2007
2004-2007
2008-2013
2008-2013
2005-2008
2005-2008
2009-2013
2001-2004
2001-2004
2005-2012
2005-2012
2013
2001-2003
2001-2003
2005-2008
2005-2008
2011-2013
2001-2003
2001-2003
2004-2007
2004-2007
2008-2013
1998-2004
1998-2004
2009-2013
2009-2013
2005-2007
2005-2007
2008-2009
2000-2005
2000-2005
2007-2012
2007-2012
2002-2005
2002-2005
2006-2008
2006-2008
2009-2013
2009-2011
2009-2011
2001-2005
1999-2006
1999-2006
Y-164PT
Y164-EK3P
Y-164PT
Y164-EK3P
Y-160PT
Y160-EK3
Y164-EK3P
Y-164PT
Y170-EK3P
Y170-EK3P
Y-164PT
Y164-EK3P
Y170-EK3P
Y-160PT
Y160-EK3
Y-164PT
Y164-EK3P
Y170-EK3P
Y160-EK3
Y-160PT
Y-164PT
Y164-EK3P
Y170-EK3P
Y-160PT
Y160-EK3
Y-164PT
Y164-EK3P
Y170-EK3P
Y160-EK3
Y-160PT
Y-164PT
Y164-EK3P
Y-164PT
Y164-EK3P
Y170-EK3P
Y-160PT
Y160-EK3
Y-164PT
Y164-EK3P
Y-160PT
Y160-EK3
Y-164PT
Y164-EK3P
Y170-EK3P
Y-164PT
Y164-EK3P
MIT9-EK3
Y-160PT
Y160-EK3
N/A
A-Y160
N/A
A-Y160
N/A
A-Y160
A-Y160
N/A
T-Y170
T-Y170
N/A
A-Y160
T-Y170
N/A
A-Y160
N/A
A-Y160
T-Y170
A-Y160
N/A
N/A
A-Y160
T-Y170
N/A
A-Y160
N/A
A-Y160
T-Y170
A-Y160
N/A
N/A
A-Y160
N/A
A-Y160
T-Y170
N/A
A-Y160
N/A
A-Y160
N/A
A-Y160
N/A
A-Y160
T-Y170
N/A
A-Y160
L-MIT9
N/A
A-Y160
N/A
EH3P
N/A
EH3P
N/A
EH3
EH3P
N/A
EH3P
EH3P
N/A
EH3P
EH3P
N/A
EH3
N/A
EH3P
EH3P
EH3
N/A
N/A
EH3P
EH3P
N/A
EH3
N/A
EH3P
EH3P
EH3
N/A
N/A
EH3P
N/A
EH3P
EH3P
N/A
EH3
N/A
EH3P
N/A
EH3
N/A
EH3P
EH3P
N/A
EH3P
EH3
N/A
EH3
On-Broad Programming (F) p. 19
Snoop Required
On-Broad Programming (F) p. 19
Snoop Required
On-Broad Programming (F) p. 19
Years
Complete Key
Blade Only
Head Only
Programming
1998
1998
Y-160PT
Y160-EK3
N/A
A-Y160
N/A
EH3
On-Board Programming (F) p. 19
Years
Complete Key
Blade Only
Head Only
Programming
Comments
1997
1997-1998
1997-2000
1998-2002
2003-2012
2008-2013
2008-2012
2007-2011
2011-2013
2001-2012
2005-2010
2000-2006
1997-2002
2003-2010
2011-2013
1998-2000
2001-2010
2011-2013
Mid 99-Mid 01
H72-EK3
H73-EK3
H73-EK3
H72-EK3
H84-EK3
H92-PT
H84-EK3
H84-EK3
H92-PT
H84-EK3
H84-EK3
H72-EK3
H72-EK3
H84-EK3
H92-PT
H72-EK3
H84-EK3
H92-PT
H72-EK3
B-H72
C-H73
C-H73
B-H72
D-H84
N/A
D-H84
D-H84
N/A
D-H84
D-H84
B-H72
B-H72
D-H84
N/A
B-H72
D-H84
N/A
B-H72
EH3
EH3
EH3
EH3
EH3
N/A
EH3
EH3
N/A
EH3
EH3
EH3
EH3
EH3
N/A
EH3
EH3
N/A
EH3
On Board Programiming (J) p. 19
80 BIT
On Board Programiming (J) p. 19
80 BIT
On Board Programiming (J) p. 19
80 BIT
On Board Programiming (J) p. 19
80 BIT
Comments
Snoop Required
On-Broad Programming (F) p. 19
Snoop Required
Snoop Required
On-Broad Programming (F) p. 19
Snoop Required
Snoop Required
On-Broad Programming (F) p. 19
On-Broad Programming (F) p. 19
Snoop Required
Snoop Required
On-Broad Programming (F) p. 19
On-Broad Programming (F) p. 19
Snoop Required
Snoop Required
On-Broad Programming (F) p. 19
On-Broad Programming (F) p. 19
Snoop Required
Snoop Required
On-Broad Programming (F) p. 19
On-Broad Programming (F) p. 19
Snoop Required
On-Broad Programming (F) p. 19
Snoop Required
Snoop Required
On-Broad Programming (F) p. 19
On-Broad Programming (F) p. 19
Snoop Required
On-Broad Programming (F) p. 19
On-Broad Programming (F) p. 19
Snoop Required
Snoop Required
On-Broad Programming (F) p. 19
Snoop Required
On-Broad Programming (F) p. 19
Comments
continued on next page
For technical assistance call 1.800.800.4900 ext. 4001
13
FORD continued
Years
Explorer Sport Trac
Mid 01-Mid 09
F-150 Heritage
2004
F-150 Series
1999-2003
F-150 Series
2004-2010
F-150 Series
2011-2013
F-250 Series
1999-2003
F-250 Series
2004-2010
F-250 350 450 Super Duty
2011-2013
F-350 Super Duty
2004-2010
Five Hundred
2005-2007
Flex
2009-2012
Flex
2011-2013
Focus
2000-2011
Focus
2011
Ford GT
2005-2006
Freestar
2004-2007
Freestyle
2005-2007
Fusion
2006-2012
Fusion
2011-2013
Mustang
1996-2004
Mustang
2005-2012
Mustang
2011-2013
Mustang GT
1996
Ranger Pickup
1999-2000
Ranger Pickup
2001-2004
Ranger Pickup
2006-2011
Taurus
2000-2011
Taurus
2011-2013
Taurus LX
1996-1999
Taurus SHO, LS
1996-1999
Taurus X, Freestyle
2008
Thunderbird
2002-2005
Trucks 6000,9000,CF7000
2000-2004
Windstar
1998-2000
Windstar
2001-2003
Complete Key
Blade Only
Head Only
H84-EK3
H72-EK3
H72-EK3
H84-EK3
H92-PT
H72-EK3
H84-EK3
H92-PT
H84-EK3
H84-EK3
H84-EK3
H92-PT
H84-EK3
H92-PT
H84-EK3
H84-EK3
H84-EK3
H84-EK3
H92-PT
H72-EK3
H84-EK3
H92-PT
H73-EK3
H72-EK3
H84-EK3
H84-EK3
H84-EK3
H92-PT
H72-EK3
H72-EK3
H84-EK3
H84-EK3
H72-EK3
H72-EK3
H84-EK3
D-H84
B-H72
B-H72
D-H84
N/A
B-H72
D-H84
N/A
D-H84
D-H84
D-H84
N/A
D-H84
N/A
D-H84
D-H84
D-H84
D-H84
N/A
B-H72
D-H84
N/A
C-H73
B-H72
D-H84
D-H84
D-H84
N/A
B-H72
B-H72
D-H84
D-H84
B-H72
B-H72
D-H84
EH3
EH3
EH3
EH3
N/A
EH3
EH3
N/A
EH3
EH3
EH3
N/A
EH3
N/A
EH3
EH3
EH3
EH3
N/A
EH3
EH3
N/A
EH3
EH3
EH3
EH3
EH3
N/A
EH3
EH3
EH3
EH3
EH3
EH3
EH3
Programming
Comments
On Board Programiming (J) p. 19
80 BIT
On Board Programiming (J) p. 19
80 BIT
On Board Programiming (J) p. 19
80 BIT
On Board Programiming (J) p. 19
80 BIT
On Board Programiming (J) p. 19
80 BIT
On Board Programiming (J) p. 19
80 BIT
On Board Programiming (J) p. 19
80 BIT
Comments
Years
Complete Key
Blade Only
Head Only
Programming
Acadia
Acadia
Danali, Envoy
Danali, Envoy
Savana
Savana
Sierra
2007-2013
2007-2013
2007-2008
2007-2008
2008-2013
2008-2013
2007-2013
B111-PT
B111-EK3P
B111-PT
B111-EK3P
B111-PT
B111-EK3P
B111-PT
N/A
R-B111
N/A
R-B111
N/A
R-B111
N/A
N/A
EH3P
N/A
EH3P
N/A
EH3P
N/A
On-Board Programming (A or G) p.19
Snoop Required
On-Board Programming (A or G) p.19
Snoop Required
On-Board Programming (A or G) p.19
Snoop Required
On-Board Programming (A or G) p.19
Sierra
2007-2013
B111-EK3P
R-B111
EH3P
Snoop Required
Terrain
2010-2013
HU100-EK3P
V-HU100
EH3P
Snoop Required
Yukon
2007-2013
B111-EK3P
R-B111
EH3P
Snoop Required
Yukon
2007-2013
B111-PT
N/A
N/A
On-Board Programming (A or G) p.19
Years
Complete Key
Blade Only
Head Only
Programming
Comments
1998-2002
2003-2012
2001-2002
2003-2005
2006-2012
2010-2012
2002-2006
2007-2013
2011-2012
2003-2005
2006-2011
2009-2011
2000-2006
2010-2011
1998-2002
2003-2004
2005 - 2012
2003-2005
2006-2013
1997-2002
2006-2013
2000-2003
2004-2005
HD106-PT5
HO03-EK3P
HD106-PT5
HO01T5
HO03-EK3P
HO03-EK3P
HO01T5
HO03-EK3P
HO03-EK3P
HO01T5
HO03-EK3P
HO03-EK3P
HD106-PT5
HO03-EK3P
HD106-PT5
HO01T5
HO03-EK3P
HO01T5
HO03-EK3P
HD106-PT5
HO03-EK3P
HD106-PT5
HO01T5
N/A
S-HO03
N/A
N/A
S-HO03
S-HO04
N/A
S-HO03
S-HO03
N/A
S-HO03
S-HO03
N/A
S-HO03
N/A
N/A
S-HO03
N/A
S-HO03
N/A
S-HO03
N/A
N/A
N/A
EH3P
N/A
N/A
EH3P
EH3P
N/A
EH3P
EH3P
N/A
EH3P
EH3P
N/A
EH3P
N/A
N/A
EH3P
N/A
EH3P
N/A
EH3P
N/A
N/A
Snoop Required
Sidewinder Key
GMC TRUCK
HONDA
Accord
Accord
Civic
Civic
Civic
Crosstour
CR-V
CR-V
CR-Z
Element
Element
Fit
Insight/Hybrid
Insight/Hybrid
Odyssey
Odyssey
Odyssey
Pilot
Pilot
Prelude
Ridgeline
S2000
S2000
14
Snoop Required
Snoop Required
Snoop Required
Snoop Required
Snoop Required
Snoop Required
Key interference may occur if vehicle
has column mounted shifting.
Sidewinder Key
Key interference may occur if vehicle
has column mounted shifting.
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Snoop Required
Snoop Required
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Snoop Required
Sidewinder Key
Snoop Required
For technical assistance call 1.800.800.4900 ext. 4001
Sidewinder Key
HUMMER
H2 / H3
H2 / H3
Years
Complete Key
Blade Only
Head Only
Programming
2008 - 2009
2008 - 2009
B111-PT
B111-EK3P
N/A
R-B111
N/A
EH3P
On-Board Programming (A or G) p.19
Snoop Required
Comments
Years
Complete Key
Blade Only
Head Only
Programming
Comments
2006 - 2010
2009 - 2010
HY20-EK3P
HY20-EK3P
EB3-F-TOY48
EB3-F-TOY48
EH3P
EH3P
Snoop Required
Snoop Required
Sidewinder Key
Sidewinder Key
INFINITI
Years
Complete Key
Blade Only
Head Only
Programming
Comments
FX35/FX45
G20
G35
G35 w/Reg ignition
I30 ,135
I30 ,135
M45
Q45
Q45
QX4
QX56
2003-2008
2000-2003
2003-2004
2005-2008
2000-2004
1999
2003-2006
2002-2005
1997-2001
1999-2003
2004-2007
N104-EK3
N102-EK3
N104-EK3P
N104-EK3P
N102-EK3
NSN11T2
N104-EK3P
N104-EK3P
N102-EK3
N102-EK3
N104-EK3P
H-N102
H-N102
H-N102
H-N102
H-N102
N/A
H-N102
H-N102
H-N102
H-N102
H-N102
EH3P
EH3
EH3P
EH3P
EH3
N/A
EH3P
EH3P
EH3
EH3
EH3P
Snoop Required
Programming
HYUNDAI
Azera
Genesis 4 Door (w/o Prox)
Snoop Required
Snoop Required
Snoop Required
Snoop Required
Snoop Required
Years
Complete Key
Blade Only
Head Only
1998-2001
1998-2001
2006-2007
2006-2007
2008-2010
2007-2013
2007-2013
1998-2004
1998-2004
2005-2008
2005-2008
2009-2013
2002-2004
2002-2004
2005-2013
2005-2013
2007-2013
2007-2013
1998-2006
1998-2006
2007-2012
2007-2012
Y160-EK3
Y-160PT
Y-164PT
Y164-EK3P
Y170-EK3P
Y-164PT
Y164-EK3P
Y-160PT
Y160-EK3
Y-164PT
Y164-EK3P
Y170-EK3P
Y-160PT
Y160-EK3
Y-164PT
Y164-EK3P
Y164-EK3P
Y-164PT
Y-160PT
Y160-EK3
Y-164PT
Y164-EK3P
A-Y160
N/A
N/A
A-Y160
T-Y170
N/A
A-Y160
N/A
A-Y160
N/A
A-Y160
T-Y170
N/A
A-Y160
N/A
A-Y160
A-Y160
N/A
N/A
A-Y160
N/A
A-Y160
EH3
N/A
N/A
EH3P
EH3P
N/A
EH3P
N/A
EH3
N/A
EH3P
EH3P
N/A
EH3
N/A
EH3P
EH3P
N/A
N/A
EH3
N/A
EH3P
On-Broad Programming (F) p. 19
Snoop Required
KIA
Years
Complete Key
Blade Only
Head Only
Programming
Comments
Amanti
Amanti
Optima (Canada)
2004 - 2006
2007-2009
2010-2011
TOY40-EK3
KK9-EK3P
KK9-EK3P
G-TOY40
G-TOY40
G-TOY40
EH3
EH3P
EH3P
Snoop Required
Snoop Required
Sidewinder Key
Sidewinder Key
Sidewinder Key
Years
Complete Key
Blade Only
Head Only
Programming
Comments
1998-2001
1998-2001
2002-2003
2004-2006
1998-2005
2001-2005
2002-2007
2001-2005
1997
1998-2006
1997
1998-2006
1998
1998-2000
2001-2007
TOY40BT4
TOY40-EK3
TOY48-EK3
TOY48-EK3
TOY48-EK3
TOY48-EK3
TOY48-EK3
TOY48-EK3
TOY40-EK3
TOY48-EK3
TOY40-EK3
TOY48-EK3
TOY40-EK3
TOY40-EK3
TOY48-EK3
N/A
G-TOY40
F-TOY48
F-TOY48
F-TOY48
F-TOY48
F-TOY48
F-TOY48
G-TOY40
F-TOY48
G-TOY40
F-TOY48
G-TOY40
G-TOY40
F-TOY48
N/A
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
On-Board Programming (E) p. 20
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
JEEP
Cherokee
Cherokee
Commander
Commander
Commander
Compass
Compass
Grand Cherokee
Grand Cherokee
Grand Cherokee
Grand Cherokee
Grand Cherokee
Liberty
Liberty
Liberty
Liberty
Patroit
Patroit
Wrangler
Wrangler
Wrangler
Wrangler
LEXUS
ES300
ES300
ES300
ES300
GS300/GS400
GS430
GS470
IS300
LS400
LS400
LS430
LS430
LX450
LX470
LX470
Comments
On-Broad Programming (F) p. 19
On-Broad Programming (F) p. 19
Snoop Required
Snoop Required
On-Broad Programming (F) p. 19
Snoop Required
On-Broad Programming (F) p. 19
On-Broad Programming (F) p. 19
Snoop Required
Snoop Required
On-Broad Programming (F) p. 19
On-Broad Programming (F) p. 19
Snoop Required
Snoop Required
On-Broad Programming (F) p. 19
On-Broad Programming (F) p. 19
continued on next page
For technical assistance call 1.800.800.4900 ext. 4001
15
LEXUS continued
RX300
RX330
RX350
RX400h
SC300
SC300
SC300
SC400
SC400
SC400
SC400
SC430
SC430
LINCOLN
Aviator
Blackwood
Continental
LS6 / LS8
Mark LT Truck
Mark LT Truck
MKX / MKZ
MKX / MKZ
Navigator
Navigator
Navigator
Town Car
Town Car
Zephyr
MAZDA
626 w/luxury Pkg
626 ES-V6
626 LX
B Series Truck
B Series Truck
CX-7
CX-9
Mazda 2
Mazda 3
Mazda 5
Mazda 6
Mazda Speed 6
Miata
Miata MX5
RX8
Tribute
MERCURY
Cougar
Grand Marquis
Grand Marquis
Marauder
Mariner
Milan
Montego
Monterey
Mountaineer
Mountaineer
Mystique LS
Sable
Sable GS
Sable GS, LS
Sable LE, SE, SHO
16
Years
Complete Key
Blade Only
Head Only
1997-2003
2004-2006
2007-2009
2006-2008
1998-2001
1998-2001
2002-2006
1998-2001
1998-2001
2002-2006
1998-2001
1998-2001
2002-2011
TOY48-EK3
TOY48-EK3
TOY48-EK3
TOY48-EK3
TOY40BT4
TOY40-EK3
TOY48-EK3
TOY40BT4
TOY40-EK3
TOY48-EK3
TOY40BT4
TOY40-EK3
TOY48-EK3
F-TOY48
F-TOY48
F-TOY48
F-TOY48
N/A
G-TOY40
F-TOY48
N/A
G-TOY40
F-TOY48
N/A
G-TOY40
F-TOY48
EH3
EH3
EH3
EH3
N/A
EH3
EH3
N/A
EH3
EH3
N/A
EH3
EH3
Years
Complete Key
Blade Only
Head Only
2003-2007
2002
1998-2002
2000-2006
2006-2008
2011-2013
2007-2011
2007-2013
1998-2002
2003-2011
2009-2013
1998-2002
2003-2010
2006-2009
H84-EK3
H72-EK3
H72-EK3
H84-EK3
H84-EK3
H92-PT
H84-EK3
H92-PT
H72-EK3
H84-EK3
H92-PT
H72-EK3
H84-EK3
H84-EK3
D-H84
B-H72
B-H72
D-H84
D-H84
N/A
D-H84
N/A
B-H72
D-H84
N/A
B-H72
D-H84
D-H84
EH3
EH3
EH3
EH3
EH3
N/A
EH3
N/A
EH3
EH3
N/A
EH3
EH3
EH3
Years
Complete Key
Blade Only
Head Only
1998-1999
1998-1999
1998-1999
1999-2000
2001-2009
2007-2012
2007-2012
2011-2013
2004-2013
2006-2012
2003-2013
2006-2008
2001-2005
2006-2013
2004-2009
2001-2011
MAZ-24RT5
MAZ-24RT5
MAZ-24RT5
H72-EK3
H84-EK3
MAZ24-EK3
MAZ24-EK3
MAZ24-EK3
MAZ24-EK3
MAZ24-EK3
MAZ24-EK3
MAZ24-EK3
MAZ24-EK3
MAZ24-EK3
MAZ24-EK3
H84-EK3
N/A
N/A
N/A
B-H72
D-H84
J-MAZ24
J-MAZ24
J-MAZ24
J-MAZ24
J-MAZ24
J-MAZ24
J-MAZ24
J-MAZ24
J-MAZ24
J-MAZ24
D-H84
N/A
N/A
N/A
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
Years
Complete Key
Blade Only
Head Only
1999-2002
1998-2002
2003-2011
2003-2005
2005-2011
2006-2011
2005-2008
2004-2007
1998-2001
2002-2011
1997-2000
2008-2009
1999
2000-2007
1996-1999
H73-EK3
H72-EK3
H84-EK3
H84-EK3
H84-EK3
H84-EK3
H84-EK3
H84-EK3
H72-EK3
H84-EK3
H73-EK3
H84-EK3
H72-EK3
H84-EK3
H72-EK3
C-H73
B-H72
D-H84
D-H84
D-H84
D-H84
D-H84
D-H84
B-H72
D-H84
C-H73
D-H84
B-H72
D-H84
B-H72
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
Programming
On-Board Programming (I) p. 20
On-Board Programming (I) p. 20
On-Board Programming (I) p. 20
Comments
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Programming
Comments
On Board Programiming (J) p. 19
80 BIT
On Board Programiming (J) p. 19
80 BIT
On Board Programiming (J) p. 19
80 BIT
Programming
Comments
Programming
Comments
For technical assistance call 1.800.800.4900 ext. 4001
MITSUBISHI
Diamante
Eclipse
Eclipse
Eclipse
Endeavor ("A" on Blade)
Endeavor ("N" on Blade)
Endeavor
Galant
Galant
Galant
i-MiEV
Lancer EVO
Lancer
Outlander/Sport
Outlander/Sport
Raider
NISSAN
350Z Roadster
Altima
Altima
Armada
Cube
Frontier
Frontier
Juke w/o Prox
Maxima
Maxima
Maxima / 810
Murano
Murano
Pathfinder
Pathfinder
Quest
Rogue w/Reg Ingition
Sentra SE-R, 200SX, 240SX
Sentra w/Reg Ignition
Titan (Transponder Opt.)
Versa w/Reg Ignition
Xterra
Xterra
OLDSMOBILE
Aurora
Silhouette
PLYMOUTH
Breeze
Voyager/Grand Voyager
Neon
PONTIAC
Aztek
Bonneville
G5
G5
G6 / GPX
G6 / GPX
G8
Grand Prix
Grand Prix
Montana
Montana
Montana
Pursuit (Canada)
Solstice
Solstice
Torrent
Torrent
Trans Sport
Years
Complete Key
Blade Only
Head Only
2000
2000-2005
2006-2007
2008-2012
2001-2006
2004-2006
2007-2011
2000-2003
2004-2007
2008-2012
2012-2013
2003-2006
2007-2013
2004-2008
2007-2013
2006-2010
MIT8-EK3
MIT9-EK3
MIT16-EK3P
MIT17-EK3P
MIT16-EK3P
MIT9-EK3
MIT17-EK3P
MIT9-EK3
MIT16-EK3P
MIT17-EK3P
MIT17-EK3P
MIT14-EK3
MIT17-EK3P
MIT14-EK3
MIT17-EK3P
Y164-EK3P
K-MIT8
L-MIT9
L-MIT9
M-MIT14
L-MIT9
L-MIT9
M-MIT14
L-MIT9
L-MIT9
M-MIT14
M-MIT14
M-MIT14
M-MIT14
M-MIT14
M-MIT14
A-Y160
EH3
EH3
EH3P
EH3P
EH3
EH3
EH3P
EH3
EH3P
EH3P
EH3P
EH3
EH3P
EH3
EH3P
EH3P
Programming
Snoop Required
Snoop Required
Snoop Required
Snoop Required
Snoop Required
Snoop Required
Snoop Required
Snoop Required
Snoop Required
Snoop Required
Years
Complete Key
Blade Only
Head Only
Programming
2003-2009
2000-2004
2005-2006
2004-2012
2009-2013
2002-2005
2006-2012
2011-2013
2004-2007
2008-2013
2000-2003
2003-2008
2009-2013
Mid 99-2004
2005-2012
2004-2010
2008-2013
2000-2006
2007-2013
2004-2013
2007-2013
2002-2004
2005-2012
N104-EK3P
N102-EK3
N104-EK3P
N104-EK3P
N104-EK3P
N102-EK3
N104-EK3P
N104-EK3P
N104-EK3P
N/A
N102-EK3
N104-EK3P
N/A
N102-EK3
N104-EK3P
N104-EK3P
N104-EK3P
N102-EK3
N104-EK3P
N104-EK3P
N104-EK3P
N102-EK3
N104-EK3P
H-N102
H-N102
H-N102
H-N102
H-N102
H-N102
H-N102
H-N102
H-N102
N/A
H-N102
H-N102
N/A
H-N102
H-N102
H-N102
H-N102
H-N102
H-N102
H-N102
H-N102
H-N102
H-N102
EH3P
EH3
EH3P
EH3P
EH3P
EH3
EH3P
EH3P
EH3P
N/A
EH3
EH3P
N/A
EH3
EH3P
EH3P
EH3P
EH3
EH3P
EH3P
EH3P
EH3
EH3P
Snoop Required
Years
Complete Key
Blade Only
Head Only
2001-2003
1999-2004
B99-PT5
B97-PT5
N/A
N/A
N/A
N/A
Years
Complete Key
Blade Only
Head Only
1999-2000
2001-2003
2000-2001
Y160-EK3
Y160-EK3
Y160-EK3
A-Y160
A-Y160
A-Y160
EH3
EH3
EH3
Years
Complete Key
Blade Only
Head Only
2001-2005
2000-2005
2007-2010
2007-2010
2005-2010
2005-2010
2008-2009
2000-2003
2004-2008
1999-2004
2005
2005-2007
2006-2010
2006-2009
2006-2009
2007-2009
2007-2009
1999
B99-PT5
B99-PT5
B111-PT
B111-EK3P
B111-PT
B111-EK3P
GM45-EK3P
B103-PT5
PT04-PT5
B97-PT5
B107-PT5
B99-PT5
B111-EK3P
B111-PT
B111-EK3P
B111-PT
B111-EK3P
B97-PT5
N/A
N/A
N/A
R-B111
N/A
R-B111
X-GM45
N/A
N/A
N/A
N/A
N/A
R-B111
N/A
R-B111
N/A
R-B111
N/A
N/A
N/A
N/A
EH3P
N/A
EH3P
EH3P
N/A
N/A
N/A
N/A
N/A
EH3P
N/A
EH3P
N/A
EH3P
N/A
Comments
Comments
Snoop Required
Snoop Required
Snoop Required
Snoop Required
Snoop Required
Snoop Required
Diagnostic Equipment Required
Dealer Key
Snoop Required
Diagnostic Equipment Required
Dealer Key
Snoop Required
Snoop Required
Snoop Required
Snoop Required
Snoop Required
Snoop Required
Snoop Required
Programming
Comments
Programming
Comments
Programming
Comments
On-Board Programming (A or G) p. 19
Snoop Required
On-Board Programming (A or G) p. 19
Snoop Required
Snoop Required
Sidewinder Key
Snoop Required
On-Board Programming (A or G) p. 19
Snoop Required
On-Board Programming (A or G) p. 19
Snoop Required
For technical assistance call 1.800.800.4900 ext. 4001
17
PORSCHE
Boxster
SAAB
9-3,
9-5,
SATURN
Astra
Aura
Aura
Outlook
Outlook
Relay
Relay
Sky
Sky
Vue
Vue
SCION
tC
tC
xA
xB
xD
STERLING TRUCK
Bullet
SUBARU
B9 Tribeca
Forester
Forester
Impreza
Impreza ,WRX
Legacy
Legacy
Outback
Outback
SUZUKI
Equator
XL-7
XL-7
TOYOTA
4 Runner, Ltd
Avalon XLS, XL
Camry XLE
Camry LE
Camry CE
Camry
Corolla
FJ Cruiser
Highlander, Limited
Land Cruiser
Matrix
Prius
RAV4
Sequoia
Sienna Van XLE, LE
Solara SLE
Solara SE
Solara
Tacoma
Tundra
Yaris (Transponder Opt.)
VOLKSWAGON
Routan
18
Years
Complete Key
Blade Only
Head Only
1997-1998
HU66T5
N/A
N/A
Years
Complete Key
Blade Only
Head Only
1999-2003
1999-2003
YM30T5
YM30T5
N/A
N/A
N/A
N/A
Programming
Comments
Sidewinder Key
Programming
Comments
Sidewinder Key
Sidewinder Key
Years
Complete Key
Blade Only
Head Only
Programming
Comments
2008-2009
2007-2010
2007-2010
2007-2010
2007-2010
Early 2005
2005-2007
2007-2009
2007-2009
2008-2010
2008-2010
HU100-EK3P
B111-PT
B111-EK3P
B111-PT
B111-EK3P
B107-PT5
B97-PT5
B111-PT
B111-EK3P
B114R-EK3P
B114-PT or B114R-PT
V-HU100
N/A
R-B111
N/A
R-B111
N/A
N/A
N/A
R-B111
W-B114R
N/A
EH3P
N/A
EH3P
N/A
EH3P
N/A
N/A
N/A
EH3P
EH3P
N/A
Snoop Required
On-Board Programming (A or G) p. 19
Snoop Required
On-Board Programming (A or G) p. 19
Snoop Required
On-Board Programming (A or G) p. 19
On-Board Programming (A or G) p. 19
On-Board Programming (A or G) p. 19
Snoop Required
Snoop Required
On-Board Programming (A or G) p. 19
Sidewinder Key
Years
Complete Key
Blade Only
Head Only
Programming
Comments
2005-2010
2011
2004-2007
2004-2008
2008
TOY43-EK3
N/A
TOY43-EK3
TOY43-EK3
TOY43-EK3
E-TOY43
N/A
E-TOY43
E-TOY43
E-TOY43
EH3
N/A
EH3
EH3
EH3
Diagnostic Equipment Required
Years
Complete Key
Blade Only
Head Only
Programming
2008-2009
Y-164PT
N/A
N/A
On-Board Programming (F) p.19
Programming
80 BIT
Comments
Years
Complete Key
Blade Only
Head Only
2006-2011
2005-2008
2009-2010
2005-2007
2008-2012
2005-2009
2010-2011
2005-2009
2010-2011
SUB4-EK3
SUB4-EK3
SUB1-EK3
SUB4-EK3
SUB1-EK3
SUB4-EK3
SUB1-EK3
SUB4-EK3
SUB1-EK3
P-SUB4
P-SUB4
N-SUB1
P-SUB4
N-SUB1
P-SUB4
N-SUB1
P-SUB4
N-SUB1
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
Years
Complete Key
Blade Only
Head Only
Programming
2009-2011
2007-2009
2007-2009
N104-EK3P
B111-PT
B111-EK3P
H-N102
N/A
R-B111
EH3P
N/A
EH3P
Snoop Required
On-Board Programming (A or G) p.19
Snoop Required
Programming
Comments
Comments
Comments
Sidewinder Key
Sidewinder Key
Sidewinder Key
Sidewinder Key
Years
Complete Key
Blade Only
Head Only
1999-2010
1998-2011
1998-2003
1998-2009
2003-2009
2007-2010
2005-MID 2010
2006-2010
2001-2010
1998-2008
2005-2010
2001-2008
2006-2010
2001-2010
1998-2010
1999-2008
2002-2003
2004-2010
2005-2010
2007-2010
2007-2011
TOY43-EK3
TOY43-EK3
TOY43-EK3
TOY43-EK3
TOY43-EK3
TOY43-EK3
TOY43-EK3
TOY43-EK3
TOY43-EK3
TOY43-EK3
TOY43-EK3
TOY43-EK3
TOY43-EK3
TOY43-EK3
TOY43-EK3
TOY43-EK3
TOY43-EK3
TOY43-EK3
TOY43-EK3
TOY43-EK3
TOY43-EK3
E-TOY43
E-TOY43
E-TOY43
E-TOY43
E-TOY43
E-TOY43
E-TOY43
E-TOY43
E-TOY43
E-TOY43
E-TOY43
E-TOY43
E-TOY43
E-TOY43
E-TOY43
E-TOY43
E-TOY43
E-TOY43
E-TOY43
E-TOY43
E-TOY43
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
EH3
Years
Complete Key
Blade Only
Head Only
Programming
2009-2012
Y170-EK3P
T-Y170
EH3P
Snoop Required
For technical assistance call 1.800.800.4900 ext. 4001
Comments
ON-BOARD PROGRAMMING INSTRUCTIONS
Listed on this and the following pages are the On-Board Programming procedures for the vehicles listed as using On-Board
Programming keys. These procedures allow a new transponder key to be added to the memory of certain vehicles. Consult
your owners manual if you have any questions on the programming process.
NOTE: The vehicle's that use procedures F & G require two original keys to program any new keys. Without two
originals the vehicle owner will have to go to a car dealership to get additional keys.
NOTE: Doors should be shut and windows up when performing these Procedures.
2001+ GM (United States Manufactured.)
A
2001+ GM vehicles with a #2 or #3 at the beginning of the VIN Number - use Program G.
Add Duplicate Key
1 Insert an existing keys and turn the ignition cylinder to ON (Run) and then back to OFF.
2. Within 15 seconds remove the existing key, insert the new key and turn it to ON.
3. The security light will light up for 2 seconds to indicate successful programming of the key into the vehicle.
CHRYSLER, DODGE & JEEP
F
Add Duplicate Key - Requires Two Existing Keys
1. Insert one of the two existing keys into the ignition lock and turn to the ON (Run) position.
2. After the key has been in the ON position for at least five seconds, but not more than 15 seconds,
turn the lock back to OFF.
3. Remove the key and insert the second existing key and turn to the ON position within 15 seconds.
4. A theft alarm light should illuminate after 10 seconds and a single chime sound will indicate entry
into the "Customer Programming Mode."
5. Turn the key to the OFF position within 60 seconds and remove the valid key.
6. Insert a new key and turn it to the ON position.
7. After approximately 10 seconds, a single chime will sound and the theft alarm light will stop.
Wait 5 seconds and turn the key to the OFF position.
8. The above steps must be repeated for additional keys.
2001+ GM (Canada or Mexico Manufactured. Limited USA Population.)
G
Use for 2001+ GM vehicles with a #2 or #3 at the beginning of the VIN Number.
All others use Program A.
Add Duplicate Key - Requires Two Existing Keys
1. Insert one of the two existing keys into the ignition lock and turn to the ON (Run) position.
2. When the SECURITY light goes out, remove the key.
3. Insert the second existing key and turn to the ON (Run) Position.
4. When the SECURITY light goes out, remove the key.
5. Insert the new key and turn it to the ON position.
6. When the SECURITY light goes out, the key has been programmed.
FORD, LINCOLN & MERCURY IKT
J
Add Duplicate Key - Requires Two Existing Keys
1. Insert an existing key into the ignition cylinder.
2. Turn the ignition cylinder to ON (Run) for at least 3 seconds, but no more than 10 seconds and then back to OFF.
3. Remove the existing key, and within 10 seconds insert a second key, turning it ON (Run) for at
least 3 seconds, but no more than 10 seconds and then back to OFF.
4. Remove the second key, and within 20 seconds, insert the new, un-programmed key into the ignition cylinder.
5. Turn the new key to ON (Run) for at least 6 seconds and then turn back to OFF.
6. The security light will illuminate for up to 3 seconds to indicate that the new key has been
successfully programmed. A flashing security light will indicate unsuccessful programming.
7. If the key has been successfully programmed, it will start the vehicle’s engine as well as operate
the remote entry system.
For technical assistance call 1.800.800.4900 ext. 4001
19
ON-BOARD PROGRAMMING INSTRUCTIONS
2002+ TOYOTA & LEXUS
The Toyota Electronic Control Module does not have programming modes without a pre-programmed key.
If there is no key available that is already programmed into the module, the module must be replaced.
I
To Delete All But One Key From The Unit
1. Simultaneously depress and release brake and accelerator pedals 1 time.
2. Insert an existing master key into the ignition cylinder. Do not turn the key from the OFF (LOCK) position.
3. Within 15 seconds of inserting the key, depress and release the accelerator pedal 6 times.
4. Within 20 seconds of completing the above step, depress and release the brake pedal 7 times.
5. The security light will flash, indicating all keys other than the one being used have been deleted.
6. Remove the key from the iginition cylinder within 10 seconds. It will be the only key still
programmed to work.
Add Duplicate Key - Requires One Working Toyota/Lexus Master Key
1. Make sure all doors and windows are closed.
2. Insert Master key into the ignition cylinder.
3. Cycle the ignition cylinder from ON to OFF 5 times.
4. Open and close the driver side door 6 times.
5. Remove the Master key and insert the new duplicate key.
6. TURN THE IGNITION CYLINDER ON.
7. The new key will be registered after 60 seconds. The THEFT light on the dashboard will go out,
indicating that programming has been completed.
1998+ TOYOTA & LEXUS
The Toyota Electronic Control Module does not have programming modes without a pre-programmed key.
If there is no key available that is already programmed into the module, the module must be replaced.
E
To Delete All But One Key From The Unit
1. Simultaneously depress and release brake and accelerator pedals 1 time.
2. Insert an existing master key into the ignition cylinder. Do not turn the key from the OFF (LOCK) position.
3. Within 15 seconds of inserting the key, depress and release the accelerator pedal 6 times.
4. Within 20 seconds of completing the above step, depress and release the brake pedal 7 times.
5. The security light will flash, indicating all keys other than the one being used have been deleted.
6. Remove the key from the iginition cylinder within 10 seconds. It will be the only key still
programmed to work.
Add Duplicate Key
1. Simultaneously depress and release brake and accelerator pedals 1 time.
2. Insert existing Master key into ignition.
3. Within 15 seconds, depress and release the accelerator pedal 5 times.
4. Within 20 seconds, depress and release the brake pedal 6 times and remove key.
5. Within 10 seconds, insert new key into ignition.
6. Within 10 seconds, depress and release the accelerator pedal 1 time.
7. After 80 seconds new key is registered and security light goes off.
8. Remove the new key and depress and release the brake pedal 1 time.
10590 Hamilton Ave
Cincinnati, OH 45231
1.800.800.4900
20
990467 Rev. C
4/13