35-9136 35-0117 35-9162 35-0098 Carburetor Adapters. VT No. # Size 35-9136 A 36-45mm 35-0117 A 42-42mm 35-0194 A 40-44 mm 35-4574 B 36-38mm 35-9162 B 40mm 35-0098 C 38mm 35-0088 D 38mm 35-0194 35-4574 Intake Manifold 1966-84 35-9150 15-0141 VT No. 15-0141 15-1019 15-0142 15-1144 15-1019 15-1162 15-1163 35-0088 Type Spigot Rubber Spigot Rubber Spigot Rubber Flange Adapter Flange Adapter 2 Bolt Adapter with r ubber 2 Bolt Adapter 14-0573 Intake Manifold O-Rings and Seals. James VT No. OEM Type 14-0624 14-0165 26995-86A 1986-up 14-0573 — As Above Blue Silicone 14-0678 — As Above Oversize 14-0689 — As Above Rubber w/Metal Element Standard Size 14-0708 — As Above Rubber w/Extra Thick Metal Insert Standard Size 14-0625* 14-0180* 27002-89 1990-up BT — 14-0690 — 2000-up with EFI, 44mm — 14-0691 — 1999-up TC88 *Note: Seal for carb to intake manifold. CV Carb Adapter adapts HSR-42 Mikuni or CV Carb to 2 Bolt manif old. Use spigot seal VT No. 14-0180. VT No. Type 35-9150 2 Bolt Early Style 35-9223 2 Bolt S&S B+E Manifold Spacer replaces 29250-78 on 197188 models. 3/8” thick. Item Stock Spacer, each As Above, James Gaskets, Non-beaded Gaskets, Beaded Spacer Kit, James (1 3/4” I.D.) Stock Spacer Kit, James (1 13/16” I.D.) Custom Spacer Kit, James (2 1/16” I.D.) Custom Carb Spacers for S&S are available in 1” or 3/8” thickness for spacing out 1 7/8” carburetors on models with 5 gallon tanks . VT No. Size 35-0105 1” 35-0086 3/8” 14-0950 1 7/8” Spacer Block O-Ring and B Carb base 14-0957 Super ‘E’ Carb Base, O-Ring 14-0958 Super ‘G’ Carb Base, O-Ring Air Cleaner Mount Gaskets. James VT No. OEM Years 15-1146 15-0148 29058-77 1977-89 15-1016 — As Above .062 thick 15-1017 15-0285 29059-88 1988-up CV type 15-1147 — As Above Steel Core 15-1148 — As Above Adhesive Coated 15-0285 15-0596 — 29095-95 1995-00 EFI 15-1199 — 29062-95B 1995-06 Carb — 15-1527 28583-01A 01-up Carb — 15-1568 29645-08 2008-up EFI — 17-0948 Lock Tab 1983-85 Big Twin Bendix 40mm Carb 35-0023 35-0063 35-0024 Zenith 40mm Performance Spigot Mount Carburetors Kit for all 1984-up Evolution and Twin Cam models with dual cab le operation. Features adjustable main jet, butterfly type choke, spigot mounting and acceleration pump. Uses stock type cables and air cleaner. Comes complete with all fittings, adapters and instructions. Kits sold as shown. VT No. Finish 35-0023 Standard 35-0024 Chrome 35-0063 Standard 319 BIG TWIN Tru Seal Manifold with 2 machined manifold halves which bolt together with stainless allen screws. Does not require the use of existing stock style O-rings or seals. Evo type also includes front and rear head spigots, gaskets, sealing compound and instr uctions included. Fits 1985-up Evo Big Twin “G” models. VT No. 35-0075 EFI Components Chrome Manifold Cover fits 2004up FXD, 2001-up ST and 2002-up FLT replaces 27483-07. VT No. Item 34-0100 Kit 15-1527 Gasket EFI Induction Bracket fits 2008up Touring. VT No. 31-4195 50mm Throttle Body for 2006-up TC-EFI models. VT No. Item 35-0786 Throttle Body 34-1285 Air Cleaner 34-1285 Intake Flange Set fits EFI models 2007-up. VT No. 34-1188 S&S Fuel Pump for fuel injected custom bikes. Hollow mounting bolts secures the pump flange to the bottom of nearly any fuel tank and provides an outlet for wiring and pressurized fuel. A fiber media filter placed at the lo west point in the tank prevents contaminants from damaging the pump or clogging fuel injectors. Pump has a samp draw, 58 PSI and a 45L per hour r ating. VT No. 35-5089 Billet Flange Set for use when installing larger throttle bodies for EFI. VT No. 35-0787 S&S Single Bore Tuned Induction Intake System. Features a swept forward 2 into 1 design that creates a super charging eff ect and rams air into cylinders which creates more mid range torque. Air cleaners are available in chrome or natural finish and include air filters. Mounting hardware must be purchased separately. 34-0181 Air Cleaners VT No. Finish 34-0180 Natural 34-0181 Chrome Mounting Brackets 34-0182 1984-06 Big Twins with S&S E or G Carb 34-0183 1984-06 Big Twins with CV Carb Induction Flange Set will adapt 34-0180 and 34-0181 to 31-0705 Sifton breather bracket. VT No. 34-1523 EFI Components 35-0874 Fuel Rail Kit 35-0875 Module Service Kit 15-1536 35-0139 320 15-1537 EFI Gaskets. VT No. OEM 15-1536 29368-99 15-1537 29465-99 15-1567 29718-08 15-1568 29645-08 ® ThunderJet 35-0137 35-0875 35-0874 15-1567 Type Induction Air Filter Induction Air Filter 15-1568 Year 1999-07 1999-07 2008-up 2008-up ThunderJet® EFI Throttle Body, Manifold and High Flow Air Cleaner answer the demand for airflow in performance engines. These oversize (available in 50mm and 54mm) CNC-machined castings replace the 44mm factory designs used on Delphi®-equipped 2001 and later models , are designed to accept the f actory electronic components, including injectors, so assembly is a snap. Matching manifolds (required) are available for most popular engine kits from 95” up to 124”. High Flow Air Cleaner includes a CNC-machined billet back plate, 2 3/4” deep K&N filter, breather plumbing and heavy-duty support brackets. This system substantially raises intake airflow capabilities for impressive performance gains. Manifold, throttle body, air filter and cover sold separately. VT No. Description 35-0137 50mm EFI Throttle Body w/cruise control 35-0138 54mm EFI Throttle Body w/cruise control 35-0139 EFI Manifold for stock length cylinder. Fits H-D® 95 & 107” engine kits, S&S 95 & 106” Jims 113” kits 35-0153 EFI Manifold with 5.013”-5.016” Long Cylinders fit S&S 124” Kit & Jims 116” Kit 35-0154 EFI Manifold with 4.975-4.980” Long Cylinders fits 117” Kit 35-0155 EFI Manifold with 5.037” Long Cylinders fits 120” Kit 35-0156 High Flow Air Cleaner Assembly for 50/54mm ThunderJet Throttle Body (cover not included) 15-1200 Induction Module Gasket 15-1201 EFI Filter Gasket 35-0130 35-0131 Adjustable Idle Mixture Needles provide adjustment for Keihin carbs. VT No. Carb Type 35-0131 Butterfly 35-0130 CV Keihin Carb Fitting replaces 27371-76, 90°, plastic, each. VT No. 40-0534 Accelerator Pump Kit improves throttle response on 1979-88 type Keihin carb models with a greater volume of fuel from the pump circuit. VT No. 35-9050 Keihin Carb BIG TWIN VT No. 35-0220 Installed Keihin and CV Idle Screw allows for easier adjustment by hand. VT No. 35-0220 35-1972 35-1976 ThunderJet Accelerator Jet & Accessories mounts in all BendixKeihin, S&S, Flowmaster, Tillotson, and CV carbs, choke must be deleted for use. Works on Venturi vacuum principle as third jet. Extra jets included. VT No. 35-1972 35-1976 35-0179 35-9244 35-9245 Type Thunder Jet Bendix Keihin, S&S E series Thunder Jet for CV. Carb Thunder Jet for S&S G & D Carb Replacement Jet Tube Set of 3 air bleed jets for S&S Super E & G Includes 1 each .135, .150, & .160 ThunderJet Installation Fixture positions carb for precise angles for drilling. 16-0782 S&S E/G, B/D Fixture 16-0783 Keihin CV Fixture 16-0784 Jet Tool, All Keihin Carb Keihin Adjustable 35-0513 Fitting is Main Jet. Full constructed adjustability for of machined maximum tuning brass with efficiency. internal Viton O-rings for positive sealing VT No. 35-0369 and swivels to 360°. Replaces 27371-76, High Flow Fuel Inlet each. replaces broken fuel inlet to VT No. 35-0513 the carburetor bowl for modiNeedle Jet fied motors. Fits all Keihin Seat Cutter carburetors (Butterfly and eliminates CV) 1976-up Shovelhead, gasoline Evo, TC-88. seepage VT No. 35-0134 from around the needle jet. Creates a Keihin Carb Fitting smooth and concentric seat Extractor/Installation VT No.16-0095 Tool will remove and Slow Jet Screw replace broken or Driver facilitates damaged. VT No. 40removal of Keihin slow 0534, 27371-76, 90° jets with no damage to carb fitting. jet. VT No. 16-0687 VT No. 16-0546 Chrome Float Bowl Speed Screws for all CV carbs 40 and 44 mm carbs . Set of 4 machined screws. VT No. 35-0259 Keihin Low Speed Jets fit 1976-89 Keihin carbs, except CV. VT No. OEM MM 35-0297 27896-79 .65 35-0294 27894-78 .68 35-0296 27897-78 .72 35-0295 27382-77 .75 35-0299 27348-77 .88 35-0298 27348-76 1.00 Keihin Main Jets. VT No. OEM MM 35-0357 27419-76 1.65 35-0358 27418-76 1.70 35-0359 27417-76 1.75 35-0361 27416-76 1.80 Carb Mount Stud Set replaces 29254-78. Fits 1978-89. Length is 1 1/4” VT No. 12-2110 321 CV Keihin Carb CV Carb Rebuild Kit includes seals, O-Rings, diaphragm and vacuum piston. VT No. 35-0465 38mm Keihin CV Carburetors are made in Japan for dual cable operation. Replaces 27421-99C. Fits Big Twin. VT No. 35-9283 35-0027 35-0200 35-0067 Flatside Carburetor Kit features smooth air/fuel flow for low and mid range power. Installs with stock cable but requires performance intake manifold. Fits 1990-up Evo and Twin Cam Big Twin models. VT No. OEM Item Size 35-0065 27934-99 Carburetor 44 35-0027 29641-99 Carburetor 42 35-0066 27636-99 Manifold 1990-99 Evo 35-0067 29635-99 Manifold 1999-up TC-88 Keihin Carb Rebuilds contains needle, proper o-rings and diaphragm. VT No. Year Brand 35-0200 1976-78 GB 35-0240 1976-86 Keihin 35-0197 1978-81 GB 35-0196 1983-89 GB 35-0219 1976-86 James 35-0416 1989-up CV GB 35-0422 1988-up CV James CV Carb Rebuild Kit. VT No. 35-0416 1988-91 35-0444 1988-up Keihin FCR Carburetor Kits for 1990-99 BT feature a smoothbore Venturi accelerator pump (air filter adapter allows the use of an air cleaner designed for stock CV carb to be used) and mounting hardware. Uses stock type CV cables. 35-0444 VT No. 35-9330 35-9331 Type Without air cleaner With air cleaner Yost Power Tubes are fuel atomizers, which atomize the fuel to its finest f orm as it enters the cylinders. The CV-40 kit includes (1) power tube, (1) drill bit, (2) washers, (2) flow control needles and (4) main jets. Detailed instructions are included with each kit. VT No. Fits 35-9232 Screamin’ Eagle CV44 35-9354 40 mm CV 1988-up REV 1 35-9236 44mm CV 1988-up REV1 322 CV Main Jets for Keihin available in packs of 5. VT No. Size M/M CV Slow Jets 35-0451 1.40 VT No. Size M/M 35-0452 1.45 35-0380 .040 35-0453 1.50 35-0381 .042 35-0454 1.55 35-0338 .044 35-0375 1.60 35-0382 .045 35-0376 1.65 35-0339 .046 35-0377 1.70 35-0383 .048 35-0378 1.75 35-0456 .050 35-0334 1.80 35-0457 .052 35-0379 1.85 35-0458 .054 35-0335 1.90 35-0336 1.95 35-0337 2.00 35-0455 2.05 Keihin Carb BIG TWIN Deluxe Carb Kits include all pieces shown for 1976-89 Keihin Carbs. VT No. Type 35-9172 Stock 35-9176 Viton 35-9279 Replica 35-9279 Keihin Allen Screw Kit includes chrome allen screws where required. VT No. Years 35-0206 1976-89 37-9116 1989-up CV 35-0230 Keihin Carb Parts and Accessories VT No. # OEM Item 14-0921 A 27121-89 Float Valve O-ring 1989-up CV 35-0110 B 27311-76 Pump cap, 10 pk 14-0566 27312-76 Float Bowl Screw O-ring, 76-77 13-9234 C 27314-76 Throttle Stop Screw Spring 14-0560 D 27324-83 Float bowl O-ring 1983-91 CV 35-9067 E 27337-76 Float valve with clip 27338-76 35-0230 F 27585-88 Vacuum Piston 14-0559 G 27358-76 Float bowl O-ring 1976-78 14-0565 H 27360-76 Float Bowl Screw O-ring, 78-80 35-9066 I 27361-76 Pump diaphragm 35-0852 I 27361-76 Pump diaphragm (5 pk) 13-9168 27362-76 Diaphragm spring 14-0564 K 27577-88 Float bowl O-ring 1989-91 CV 14-0937 K 27577-92 Float bowl O-ring 1992-up CV 14-0557 L 27889-78 Float bowl O-ring 1978-82 14-0679 M 27385-76 Low Speed Jet Plug 1976-up 13-9212 27123-89 Accelerator Rod Spring 1989-up 13-9169 27136-81 Throttle & Idle Adj. Screw Spring, 1981-up 13-0500 27136-90 Idle Screw Spring 1990-up 13-9213 27162-89 Vacuum Piston Spring, 1989-up 13-9179 27315-88 Primary Starter Spring, 1988-up 13-9181 27319-76 Low Speed Adjuster Screw Spring, 1981-up 13-9183 27322-76 Throttle Lever Spring, 1981-up 13-9178 27584-88 Primary Vacuum Spring, 1988-up 35-9111 27886-78A Needle for Screamin’ Eagle CV Choke Cable Bracket will mount the knob assembly on top of carb for use with all air cleaners. VT No. 35-0681 35-0163 35-0567 CV Carb Tops available with or without choke cable mount built in. VT No. Type 35-0163 Without 35-0567 With 35-8029 35-8032 35-8025 Chrome CV Carb Top replaces black plastic cover on 1990up Big Twin models. VT No. Type 35-8025 Smooth 35-8029 Eagle Spirit 35-8032 Ball Mill 35-0157 35-0158 35-0159 35-0169 35-0630 Idle Adjustment Screws fit CV carb cables include housing as shown. VT No. Type 35-0157 Black 35-0158 Black with Holder Stay 35-0159 Black Long with Holder Stay 35-0169 Polish 35-0630 Polish Long with Holder Stay 323 Keihin Rebuild Kits CV Carb Upgrade Kit includes rebuild kit, vacuum piston, screws and tuner kit, fits 1988up Keihin CV carbs. VT No. 35-0459 CV Tuners Kit by KineticKarb is for 1989-99 Keihin constant velocity carbs to permit easy tuning after installation of custom air cleaners, cams & exhaust. Includes instructions, 3 main jets, needle jet, adjustable needle with spacers and circlips, a spring and drill bits. This dual purpose kit fits 1989 models without acceler ator pump and 1990-99 with accelerator pump. Jet assortment includes #140-205, 70 piece main jet assortment. VT No. Item 35-9075 Kit 35-9099 Jet Assortment CV Carb Upgrade use when installing 35-9075 CV tuners kit. VT No. 35-0363 Extended Float Bowl Kit fits CV carbs for extra capacity, includes Hi-Flow inlet fitting. VT No. 35-0135 CV Jet Kits for 1999-up Dyno-Jet for stock carbs work with mild cams stock or aftermarket exhaust & stock or aftermarket air cleaner. VT No. 35-0535 fits 1999 Twin Cam 88. D-J# 8120. VT No. 35-0538 fits 2000up TC-88. D-J# 8121 VT No. 35-0539 fits 2000-up TC88 Thunder Slide Kit. D-J# 8131. VT No. 35-0529 fits 1996-00 1340 with accelerator pump. D-J# 8105. 35-9264 VT No. 35-0540 fits Screamin’ Eagle 44mm CV TC-88 D-J# 8132. VT No. 35-0528 fits 1990-99 BT Thunder Slide Kit with accelerator pump. D-J# 8108. System II Atomizer. Screen device which further mixes fuel at face of manifold. The tossed mixture burns more efficiently and completely. Atomizer VT No. Item 35-0093 38mm Bendix, Keihin 35-0092 S&S, Mikuni, 40mm Screamin Eagle, 40mm 35-9217 All C.V. Carbs 35-0859 324 Turbulator turns the intake manifold into a violent mixing chamber. The heavier fuel particles are directed away from the sides of the intak e manifold back to the center of air flo w. The fixed valve turbulator then tumbles the mixture resulting in higher horsepower. VT No. Model 35-926038mm 2 Bolt Keihin, Bendix 35-926140mm 2 Bolt S&S ‘B’, +’E’, Flat ‘S’, Mikuni 35-9263CV Keihin, All 35-926444mm 2 Bolt 35-0859S&S G Edelbrock Performer Series Carb Kits feature adjustable accelerator pump, replaceable main jet, adjustable idle air bleed, stainless steel throttle shaft bearings, hard anodized flat slide and air cleaner flange that will accept an y pre CV or CV type style air cleaners . All kits use stock intake manifolds, throttle cables and mounting hardware. Kits are available with flange mount carb or spigot mount carb. In 38mm, 40mm or 42mm. Flange mount carbs fit 198489 Big Twins. Spigot mount carbs fit 1991-up Big Twins and 1986-up XL. All TC-88 applications require separate purchase of VT No. 35-3121 intake manifold. Flange Spigot Size Mount Mount 35-3172 35-3170 38 35-3173 35-3171 40 35-3174 35-3169 42 Carb Kit Dell’Orto Pumper features adjustable accelerator pump and choke. Kit includes throttle assembly, cable, grips, air cleaner adapter and carb adapter to fit stock 2 bolt or Shovel 35-0030 manifolds on pre1985 models. VT No. Item 35-0030 38mm Complete Kit 35-0031 40mm Complete Kit 35-0053 38mm Complete Kit 35-0238 38mm Carb Only 36-2550 Throttle Cable 35-0251 Choke Lever 15-0555 Carb Gasket Kit Model Shovel Shovel Panhead 35-0251 34-1060 34-1083 Dell’Orto Pumper Air Cleaner Adapters Allows use of Bendix, Keihin or Stock 1990-up Air Cleaners. VT No. Type Air Cleaner 34-1060 Flat Bendix 34-1083 Recessed Stock Dell’ Orto Spigot Carburetor Adapters. O-Ring seal with steel flange. VT No. 35-9076 SU Eliminator II Carb Kit Eliminator Il SU Carb Kit features upswept polished mani35-0051 fold & float bowl and a shor tened dome to fit Evo engine with a 3.5 or 5 gallon tanks . Upswept manifold design creates as much as 20% horsepower gain while smoothing out performance over the entire RPM range. Also allows leg clearance when using 5 gallon tanks because the carb is tucked in close. Kits include chrome leveling bracket, manifold, necessary mounting bolts, push pull throttle bracket and installation instructions. VT No. Year Model 35-0051 1984-99 Ev o 35-4551 SU Carburetor Replacement Parts VT No. Application 35-4551 Rebuild kit for Eliminator SU carb. 35-4552 Replacement main jet 35-4553 Carb to intake manifold gasket 35-4554 4 1/2” oz piston return spring (red) 35-4555 8 oz piston retur n spring (silver) 35-4556 12 oz piston retur n spring (green) 35-4557 Standard (BBX) tapered needle 35-4558 Slightly leaner (BBT) tapered needle 35-4559 Still leaner (BBD) tapered needle 35-4561 Chrome velocity stack 35-4563 81-up FL-FX push-pull throttle adapter Holley Induction System Performance Induction System by Holley includes a 2 barrel carburetor, an open plenum manifold with a complete air cleaner and a breather manif old. This kit will use the existing stock throttle and idle cables on carbureted models not for use with cruise control. VT No. OEM Finish Years Model 35-0556 27973-00 Stainless 1999-up TC-88 35-0557 28009-00 Polished 1990-99 Ev o 1340 325 BIG TWIN Edelbrock Performer Carb Air Cleaner Mount 34-0662 Installed Sifton Carb Bracket No Hoses Needed! Chrome Billet Carb Bracket Kits feature integral breather passage to air intake. Kits include breather bolts and hardware. For use on 1993-up Ev & TC-88. Allows mounting of CV or S&S pattern air cleaners or velocity stacks to S&S Super “E” carb types as noted. VT No. Cleaner 34-0662 CV 34-1179 S&S 34-1185 S&S 34-1510 CV/S&S Big Twin 42/45/48 Mikuni 34-0445 BT 42/45/48 Mikuni 34-0791 Bolt Set Ev 34-0792 Bolt Set TC88 34-1185 34-0662 35-1100 35-1107 35-1105 35-1115 35-1115 326 34-1179 Air Cleaner Spacer is .560” thick and will allow installation of stock S&S air cleaner on 34-1185 integral mount bracket. VT No. 34-1526 Carb Kits 35-1100 34-1510 Weber 45MCHH Single Barrel Carburetor features a chrome carburetor and a unique intake manifold and breather kit that fits both Evolution and Twin Cam big twin motors 1992up. Kits are available with a chrome billet air cleaner and "shorty" type manifold which fits in the stoc k location between the cylinder V. (kits 35-1100 and 35-1102) For an aggressive look the 45MCHH can be ordered with a highly polished forward swept manifold and cone shaped air filter.(Kits 35-1105 & 35-1106) Additionally, the 45MCHH is available in a kit which features a forward swept air filter elbow which can be used either in the f orward or upswept position. The elbow and mounting brackets are polished billet aluminum. (Kits 35-1107 & 35-1108) All 45MCHH kits include carb uretor, manifold, air filter, choke cable, installation instructions and jet kit. Carburetor kits are available for both EVO80 and TC-88 carbureted motors. VT No. Type 35-1100 EVO80 w/shorty manifold & chrome billet air filter. 35-1102 As above for TC-88 motors. 35-1105 EVO80 w/Swept Forward & cone shaped air filter 35-1106 As above for TC-88 motors. 35-1107 EVO80 with swept forward/swept up air filter. 35-1108 As above for TC-88 motors. 35-0589 CV Air Cleaner Adapter Plate Weber 45DCOE Chrome carburetor kits feature a chrome dual runner swept forward manifold, chrome two barrel carburetor, velocity stacks all installation hardware and jet kit , accepts stock cables 1992-up. VT No Type 35-1115 EVO 80 35-1120 TC-88 S&S 17/8 & 21/16 Super ‘G’ feature adjustable volume pump, enrichment device for ease of star ting and a throttle spool assembly designed for late 2 cable operation. Supplied with tear drop air cleaner, mounting bracket and black fuel line. Super ‘E’ carb is approximately 17/16” shorter than the Super ‘B’ carb, making installation length of the Super ‘E’ the same as stock. Can be used with 3.5 or 5.0 gallon F atbob tanks. The 11/8” is for street stock applications, 21/16” for big bore and race use. Intake manifold clamps or flanges must be purchased separately when they are required. 35-0471 17/8 ‘E’ 35-0004 35-9229 35-9230 35-0471 21/16 ‘G’ — 35-9237 35-9226 35-0470 Fits 1984-92 Big Twin Evolution 1993-98 Big Twin Evolution 1999-up TC-88 for use w/stock cables Carb Only 34-0853 34-0854 34-1197 Installed 34-0593 Billet Velocity Stack fits 34-0662 bracket. Stack includes inverted cone filter element. VT No. Item 34-0853 Stack 34-1197 Stack with fan 34-1179 Bracket 34-0854 Replacement Filter 34-0593 Kit 34-1179 34-1166 Chrome Velocity Stack Kit includes bracket with integral breather passages. Enricher knob included. Fits S&S E. VT No. Model 34-1166 Ev and TC-88 34-1179 Bracket Only Hi-Flow Air Cleaner Element fits S&S E air cleaners. Kit includes washable 3.5” high filter and mount studs. VT No. 34-0653 CycovatorTM 8” Air Cleaner includes built in breather bracket for S&S E models on 1993-06 BT. 52 square inches of filter space. VT No. 34-0637 327 BIG TWIN Super ‘E’ & ‘G’ Jets for S&S Main Jets for S&S. Use when installing new exhaust system or just tuning for better performance and mileage. Sizes available in increments of .002 and r anges in sizes from .040 to .104. Sold each. VT No. Size VT No. Size VT No. Size 35-0312 .062 35-0323 .084 35-0300 .040 35-0313 .064 35-0324 .086 35-0301 .042 35-0314 .066 35-0325 .088 35-0302 .044 35-0326 .090 35-0315 .068 35-0304 .046 35-0316 .070 35-0327 .092 35-0305 .048 35-0317 .072 35-0328 .094 35-0306 .050 35-0318 .074 35-0329 .096 35-0307 .052 35-0319 .076 35-0330 .098 35-0308 .054 35-0320 .078 35-0331 .100 35-0309 .056 35-0321 .080 35-0332 .102 35-0310 .058 35-0322 .082 35-0333 .104 35-0311 .060 Intermediate Jets fits all S&S carbs. VT No. Size/No. VT No. 35-0350 025 #1 35-9174 35-9173 .0265 35-0354 35-0351 .028#2 35-0355 35-0352 .0295 #2 1/2 35-0356 35-0353 .031 #3 Size/No. .032 .033 #4 .036 #5 .040 #6 35-9187 35-0235 S&S Super ‘E’ & ‘G’ Rebuild Kits & Replacement Parts. Rebuild kits contain all the par ts necessary for a complete overhaul. VT No. Fits 35-9185 Super ‘E’ Body Rebuild 35-9186 Super ‘G’ Body Rebuild 35-9187 Accelerator Rebuild Only, Super ‘E’ & ‘G’ 35-9240 Super ‘E’ Master Rebuild 35-9241 Super ‘G’ Master Rebuild 35-9183 Replacement Float for Above 15-0319 Float Bowl Gasket Only, Super ‘E’ & ‘G’, 5 pk 35-0234 Needle and Seat Super ‘E’ & ‘G’ 35-0978 Needle Only 35-0235 1/4” Insulator Block, 17/8” Carbs 35-0258 1/4” Insulator Block, 21/16” Carbs 35-0236 Choke Lever 35-2388 Replacement Float Bowl Super ‘E’ & ‘G’ Pingel® Power Flow Valve has a single outlet with reserve.Manufactured as a one piece billet brass unit featuring a -6AN threaded fitting for fuel line hook up using stainless steel hose and fittings, carb fitting for Super ‘E’ & ‘G’ sold separately. VT No. Item 35-0420 Petcock 35-0421 S&S Carb Fitting 328 35-0170 35-0854 35-0170 Installed Enricher for S&S Super E & G features 3 positions. VT No. Type 35-0170 Pike 35-0854 O-Ring Sifton Enricher for S&S, fits Super E & G and B carbs, includes chrome knob. VT No. 35-0466 Enricher Assembly for S&S can be used on S&S Super “E” & “G” carbs when a aftermarket air cleaner or velocity stack is used. Does not require lever assembly. Features full on or full off oper ation only. VT No. 35-0152 Long Float Bowl Screws fit S&S E Carbs, to facilitate easy removal of bowl. VT No. Finish 35-0025 Brass 35-0029 Chrome Fuel Line has a preformed bend which is kink resistant. Line has 90° formed bend. VT No. Type Size 35-0523 S&S 19” x 1/4” 35-0561 Clear 20” x 5/16” 35-0562 Black 20” x 5/16” S&S Super “E” Cruise Control Adapter Kit make any Super “E” carburetor compatible with the stock cruise control. VT No. Years 31-2926 1993-97 31-2927 1998-up Breather Bolt Set fits 1993-up. VT No. 35-1704 Throttle Cable Brackets for S&S. These brackets allow the use of stock type cable on S&S “E” & “G” carbs. VT No. Type Years 35-0150 Short 1981-89 35-0151 Long 1990-up Idle Adjustment Cables include housing and spring clip as shown. Fits 35-0164 S&S Super ‘E’ with holder stay. VT No. 35-0164 Yost Power Tubes are fuel atomizers, which atomize the fuel to its finest f orm as it enters the cylinders. The CV-40 kit includes (1) power 35-9266 tube, (1) drill bit, (2) washers, (2) flow control needles and (4) main jets. S&S Kit fits B, E and G series and includes tube only. Detailed instructions are included with each kit. VT No. Fits 35-9266 S&S models 35-9213 HSR-42 35-9232 Screamin’ Eagle CV44 35-9354 40 mm CV 1988-up REV 1 35-9236 44mm CV 1988-up REV1 35-0199 VT No. 35-0199 15-0298 A Item Kit Bowl Gasket B C Adjustable Enricher for S&S (A) replaces stock fixed enricher, adjust as motorcycle warms up. Makes for an easier star ting. Instructions and O-rings included. For Super ‘B’ only. Adjustable Main Jets for S&S (C) fits in float bowl drain plug below main metering jet. The recommended main jet is 100 to 104. Fits Super ‘B’ only. VT No. # Item 35-0371 A Enricher 35-9168 B Jet Tool Install/Remove Jet on B & E carbs 35-0370 C Main Jet Super Allen Screw Sets include bowl air cleaner and cover screws in chrome. VT No. Type 37-9105 Super B 37-9106 Super E & G Air Cleaner Support Brackets to fit S&S Super ‘E’ and ‘G’ on 1966-82 FL-FX. VT No. 34-0336 35-0653 BIG TWIN Black Thunderjet fits G + D S&S carbs for larger volume. VT No. 35-0179 Super ‘B’ Body Rebuild Kit for 17/8” Super Carbs. Each kit contains 1throttle shaft, 2-throttle shaft bushings, 1-throttle plate, 1-throttle return spring, 2-throttle plate screws, 1-O-Ring, and 1-bowl gasket. Accessories for S&S Carb 34-1165 Super Velocity Stack Kit includes stack, bracket and enricher knob to fit S&S. VT No. Type Finish Type 35-0653 S&S Natural E&G 34-1165 VT Chrome E&G 34-1177 VT Chrome B Carb Spacers machined from billet 6061 aluminum and feature a polishable machined finish. Fits S&S E and G carbs. VT No. 35-0147 35-0148 35-0171 35-4571 Carb E 1” E 1.5” E 2” Size VT No. Carb Size 35-0172 G 1” 35-0173 G 1.5” 35-0174 G 2” Accelerator Pump Adjusting Screw Set allows adjustment of idle and accelerator pump by these ‘T’ bar style screws for ease of adjustment. VT No. 35-0217 Fits S&S Super ‘B’ Single Dual Quick Change Float Bowl Screws for S&S Super models to facilitate jet changes by easy bowl removal. Includes 4 knurled screws with large slots in satin finish. VT No. 37-8901 S&S Master Rebuild Kits. Complete carburetor 35-0204 restoration can be performed by using Master Rebuild Kit. Refer to Needle and Seat char t for proper year identification. Float Not Included. VT No. Year 35-9142 1983 & Earlier 35-0204 1983-up Accelo Bowls for S&S Carbs. Accelo bowl accelerator pump/float bowl kits improve the performance of S&S Super B & D carbs. Eliminates low end throttle hesitation & impro ves starting. Two models available. Note: Some machining to carb body is required, complete instr uctions included. VT No. Use 35-4571 Use on S&S Super ‘B’ & ‘D’ carbs with 2 cable bosses on carb body, 1982-up 35-0362 Bracket for Above 35-4572 Use on S&S Super ‘B’ and ‘D’ carbs with single cable boss on carb body, pre-1982 35-0203 Pump for Above Drill Fixture for Super Bowl allows installation on Super ‘B’ & ‘D’ carbs. VT No. 16-0984 Replacement Float fits all S&S Super B-E-G carburetors. For use with wire type needle and seat. VT No. 35-9183 329 Mikuni Carb 35-0028 35-9319 Mikuni HSR 42 Carburetor Easy Kits for all Evo and Twin Cam Big Twins. Partial kit includes carb, air box adapter and instructions. VT No. Fits Note 35-9315 1996-99 Evo Big Twin Uses stock choke cable, manifold and air cleaner. Comes with chrome cover 35-9319 1999-06 Twin Cam Uses stock air cleaner, choke cable & manifold. 48mm Evo & Twin Cam Mikuni Carb Kit includes polished carb, Super Flow intake manifold, air cleaner assembly and mounting hardware. VT No. 35-0028 HSR-42 Velocity Stack Kit includes chrome bracket, stack and adapter ring. VT No. 34-1101 34-0460 Sifton HSR42/45 Idle Speed Knob features stainless construction with knurls for hand adjustment. VT No. 35-0543 34-0445 Chrome Billet Carb Bracket features integral breather and includes flange ring accepts CV style air cleaners . VT No. Item 34-0445 Kit 34-1261 Ring 34-0460 Kit Breather Kit fits 1993-up BT. VT No. Item 35-0430 Kit 34-1261 Flange Ring 34-0430 Yost Power Tube fits HSR42 models. VT No. 35-9213 HS42 To S&S “E” Manifold Adapter allows installation on S&S ”E” manifolds. VT No. 35-9155 Jets Mikuni HS and HSR Jets. Pilot Jets Main Jets Chrome Float Bowl Speed Screws fit all VT No. Size VT No. Size Mikuni HSR 42, 45 and 48mm carbs . Set 35-0800 22.5 35-0806 150.0 35-0800 of 4 machined stainless screws. 35-0801 25.0 35-0807 152.5 VT No. 35-0259 35-0802 27.5 35-0808 155.0 35-0803 30.0 35-0809 157.5 — 35-0810 160.0 35-0806 34-0852 35-0805 35.0 35-0811 162.5 35-0812 165.0 35-0813 167.5 35-0814 170.0 35-0815 HSR-42 HSR-45 Jet Needles Jet Needles 31-0686 VT No. Size VT No. Size Chrome Carb Support Bracket fits HS 40/42 for 1984-99 Ev BT. 35-0815 95 35-0818 95 VT No. Item 35-0818 35-0816 96 35-0819 96 31-0686 Bracket Only 35-0817 97 35-0820 97 34-0852 Bracket w/Breather Unit 92-99 Air Cleaner Adapter Plate will adapt any CV style 3-Bolt Air 34-0834 Cleaner to the Mikuni as noted. VT No. Size AC 34-0618 42 & 45mm CV 34-0834 42 & 45mm CV 34-0684 42 & 45mm S&S 34-0618 330 Mikuni HSR42/45 Total Kit for Big Twins. These kits are complete with all required par ts for installation. Kits include HSR42mm or 45 mm carburetor, intake manifold, rubber flange, K&N filter, chrome cover, breather kit and mounting hardware. 1990-up models use stock throttle/idle cable and 1984-89 models require 1990-up cables. VT No. Fits HSR42mm 35-9321 1984-99 Evo Big Twins 35-9327 1999-up TC-88 HSR45mm 35-9222 1984-99 Evo Big Twin 35-9328 As Above Kit without Intake Manifold 35-9324 1999-up TC-88 35-9322 Rebuild Kit (42 and 45 mm) 35-0430 Breather Kit 1993-up 35-9321 Internal Throttle 36-0570 36-0595 Refer to H in installation instructions Inner Sleeve A 36-0598 VT No. 36-0570 Internal Throttle Sleeve. Custom design allows pull action of throttle cab le for use with Billet g rips. VT No. Item 36-0570 Throttle 36-0595 Ball Bearing 9mm x 4mm x 4mm 1. Cut 23/8” off end of handlebar. Remove end of throttle handle that w ould attach to throttle cables. 2, Mark handlebar for inner throttle sleeve. Drill a hole for the set screw, this will hold throttle on the handlebar. 3. Remove set screw from the outer sleeve of spiral. Slide grip on & mark end of grip on the handlebar. Measure from this mark back to set screw in outer sleeve. This measurement will be used to mar k & drill the throttle grip. Once drilled install grip. Use a small amount of Loctite® on set scre w for final installation. 4. Note Set Screw (A) do not tighten so as to mak e contact with handlebar it will prevent throttle from tur ning. OE Electronic Throttle Assembly with gear and wire for 2008-up Touring models with “TBW” throttle by wire. VT No. 36-0790 36-1202 36-0789 36-0575 Internal Throttle/Clutch Unit features ball and needle bearing construction with built in return spring. VT No. Type Item 36-0575 Throttle Assembly Uses 3 types of bear ings 36-0598 (4), 36-0591 (1), 36-0590 (1) 36-0598 Bearing Assembly Refer to H in installation instructions 36-0789 Clutch Assembly 36-0590 Bearing 5/8 x 13/16 x 5/8 36-0591 Bearing 3/8 x 7/8 x 9/32 VT No. 30-0575 36-1204 Throttle by Wire Extension Harness Kits “TBW” extension harness will plug in to the e xisting 6 position Molex connector. These wires extensions will not cause interference to motorcycles computer when installing taller handlebars . VT No. Extension 32-1205 +4” 32-1202 +8” 32-1206 +12” 32-1204 +16” 331 BIG TWIN Mikuni Carb