RGB, 100 – 277 VAC, 10° x 40° Asymmetric

advertisement
ColorBlast Powercore
gen4
LED Luminaire
ColorBlast Powercore gen4
RGB, 100 – 277 VAC, 10° x 40° Asymmetric Spread Lens, White Housing, UL/CE
Customizable exterior LED flood fixture with
intelligent color light
ColorBlast Powercore gen4 high-performance LED fixtures combine
white and rich, saturated, color and color-changing effects with
simplified installation. ColorBlast Powercore gen4 offers a range of
accessories that allow for customizable beam angles for floodlighting,
spotlighting, wall washing, and grazing, along with the efficiency and
cost-effectiveness of Powercore technology in a rugged die-cast
aluminium housing.
ColorBlast Powercore gen4
Customizable exterior LED flood fixture with intelligent color light
• Expands customization with a wide range of new Philips
accessory options. In addition to the native 10° lens,
five different diffuser lenses can customize the fixture to
produce 20°, 40°, 60°, 80°, and 10° x 40° (asymmetric)
beam angles. Three housing color choices (black, gray,
and white) – plus the option to add or combine a
louver, rock guard, full glare shield, and half glare shield
– create new aesthetic possibilities for designers and
architects.
• Improves color consistency between all LED fixtures
in a family with Chromasync technology. During the
manufacturing process a calibrated light measurement
device creates an algorithm to define a common
color gamut for an entire family of LED fixtures. When
Chromasync is enabled, color consistency between
fixtures is achieved without having to manually adjust
color points on each fixture.
• Improves durability with new flat lens that prevents water
from pooling into the fixture, keeping the LEDs protected
and secure over the course of a luminaire’s lifetime.
• Integrates patented Powercore technology that controls
power output to fixtures directly from line voltage –
rapidly, efficiently, and accurately. The Philips Color
Kinetics Data Enabler Pro merges line voltage with
control data and delivers them to fixtures over a single
standard cable, dramatically simplifying installation and
lowering total system cost.
• Universal power input range of 100 – 277 VAC.
• Works seamlessly with the complete Philips Color
Kinetics line of controllers, including ColorDial Pro,
iPlayer 3, and Light System Manager – as well as thirdparty controllers.
• Meets ASTM B117 standard for > 1,500 hours of corrosion
resistance and ANSI C136.31-2010 standard with a 3G
vibration rating.
For detailed product information, please refer to the
ColorBlast Powercore gen4 Product Guide at http://www.
colorkinetics.com/ls/rgb/ColorBlast-Powercore-gen4rgb/
• Features an innovative, redesigned optical system that
improves the quality of light from each LED, enhancing
the color uniformity and color mixing capabilities of each
ColorBlast Powercore gen4 luminaire.
Dimensions
171.2 mm (6.74 in)
44.7 mm
(1.7 in)
4 x Ø 5 mm
(.2 in)
2
166 mm (6.5 in)
99.8 mm
(3.9 in)
120.1 mm
(4.72 in)
Ø 88.9 mm
(3.5 in)
183.7 mm (7.2 in)
166.1 mm (6.5 in)
337.8 mm (13.2 in)
ColorBlast Powercore gen4, RGB, 100 – 277 VAC, 10° x 40° Asymmetric Spread Lens, White Housing, UL/CE Specification Sheet
Specifications
Due to continuous improvements and innovations, specifications may change without notice.
ColorBlast Powercore gen4, RGB, 100 – 277 VAC, 10° x 40° Asymmetric Spread Lens, White Housing, UL/CE
Output
Physical
Beam Angle
10° x 40°
Lumens
1583
Efficacy (lm/W)
35.4
LED Channels
Dimensions
185 x 338 x 171 mm (7.3 x 13.3 x 6.75 in)
(Height x Width x Depth)
Weight
3.9 kg (8.2 lb)
Effective Projected Area (EPA)
Red/Green/Blue
Housing Material
Electrical
Die-cast aluminium, powder-coated finish
Lens
Input Voltage
50 W
(Maximum at full output, steady state)
Power Factor
0.99 @ 120 VAC
Power Factor
0.93 @ 277 VAC
Clear tempered glass
Fixture Connections
100–277 VAC, auto-switching, 50/60 Hz
Power Consumption
0.096 m²
(Fixture plus Full Glare Shield)
Temperature Ranges
1.8 m (6 ft) unified power/data cable
-40° – 50° C (-40° – 122° F) Operating
-20° – 50° C (-4° – 122° F) Startup
-40° – 80° C (-40° – 176° F) Storage
Vibration Resistance
Complies with ANSI C136.31, 3G
Mechanical Impact
Control
Corrosion Resistance
Interface
Control System
Data Enabler Pro (DMX/Ethernet)
IK10
Complies with ASTM B117 standard for
> 1,500 hours
Humidity
Philips full range of controllers, including Light
System Manager, ColorDial Pro, and iPlayer 3, or
third-party controllers
Fixture Run
Length
0 – 95%, non-condensing
To calculate fixture run lengths and total power
consumption for your specific installation,
download the Configuration Calculator from www.
philipscolorkinetics.com/support/install_tool/
Lumen Maintenance
Threshold§
Ambient
TemperatureReported¶Calculated¶
L90
25° C
50° C
20,100
20,100
20,100
20,100
L80
25° C
50° C
44,600
44,600
44,600
44,600
L70
25° C
50° C
>47,100
>47,100
72,300
72,300
L50
25° C
50° C
>47,100
>47,100
72,300
72,300
Certification and Safety
Approbation
UL/cUL, CE, CQC, FCC Class A, PSE, RCM
Environment
Dry/Damp/Wet Location, IP66
* Color temperatures conform to nominal CCT’s as defined in ANSI Chromaticity Standard C78.377A.
Lumen measurement complies with IES LM-79-08 testing procedures.
Refer to www.philipscolorkinetics.com/support/appnotes/ for more information.
§ Lxx = xx% lumen maintenance (when light output drops below xx% of initial output). All values are given at B10, or the median value where 90% of the LED population is better than the reported
or calculated lumen maintenance measurement.
¶ Lumen maintenance figures are based on lifetime prediction graphs supplied by LED source manufacturers. Whenever possible, figures use measurements that comply with IES LM-80-08 testing
procedures. In accordance with TM-21-11, Reported values represent the interpolated value based on six times the LM-80-08 total test duration (in hours). Calculated values represent time
durations that exceed six times the total test duration.
ColorBlast Powercore gen4, RGB, 100 – 277 VAC, 10° x 40° Asymmetric Spread Lens, White Housing, UL/CE Specification Sheet
3
ColorBlast Powercore gen4 Photometrics 10° x 40° asymmetric spread lens
Photometric data is based on test results from an independent NIST traceable testing lab. IES data is available at www.philipscolorkinetics.com/support/ies.
Beam Angle
LED
Lumens
Efficacy (lm/W)
Illuminance at Distance
10° x 40°
RGB
1583
35.4
Center Beam fc
10º x 40º
Side
Top
4 ft
3.4 ft
1.2 ft
87 fc
6.8 ft
2.3 ft
39 fc
10.2 ft
3.5 ft
22 fc
13.5 ft
4.6 ft
14 fc
16.9 ft
5.8 ft
10 fc
20.3 ft
7.0 ft
8 ft
Polar Candela Distribution
12 ft
90º
Cd: 0
950
80º
1,900
70º
2,850
60º
3,800
4,750
50º
5,700
VA: 0º
10º
20º
- 0º H
30º
0
5
15
25
35
45
55
65
75
85
90
0
5567
5363
4219
2445
923
236
66
28
12
0
0
25
5567
5210
3201
1293
380
112
47
24
10
0
0
45
5567
4902
1815
426
127
56
30
16
6
0
0
40º
- 90º H
Zonal Lumen
Zone
0-30
0-40
0-60
0-90
60-90
70-100
90-120
90-180
0-180
Lumens
1,336.3
1,482.8
1,564.6
1,583.4
18.8
5.4
0.0
0.0
1,583.4
% Luminaire
84.4%
93.6%
98.8%
100.0%
1.2%
0.3%
0.0%
0.0%
100.0%
70
5567
4624
991
187
69
35
18
8
2
0
0
90
5567
4499
804
151
58
29
14
6
2
0
0
16 ft
20 ft
24 ft
74.5 ft (22.7 m)
1 fc maximum distance
Vert. Spread: 45.9º
Horiz. Spread: 16.5º
Coefficients Of Utilization - Zonal Cavity Method
RCC %:
80
RW %:70 50 30
RCR:
0
1
2
3
4
5
6
7
8
9
10
1.19
1.14
1.10
1.05
1.01
0.97
0.94
0.90
0.87
0.84
0.81
1.19
1.12
1.05
1.00
0.95
0.90
0.86
0.82
0.79
0.76
0.73
1.19
1.10
1.02
0.95
0.90
0.85
0.81
0.78
0.74
0.71
0.69
0
1.19
1.08
0.99
0.92
0.86
0.82
0.78
0.74
0.71
0.68
0.65
70
70 50 30 0
Effective Floor Cavity Reflectance: 20%
50
30
10
0
50 30 20
50 30 20 50 30 20
0
1.16
1.12
1.07
1.03
0.99
0.96
0.92
0.89
0.86
0.83
0.80
1.11 1.11 1.11
1.06 1.04 1.03
1.01 0.98 0.96
0.96 0.93 0.90
0.92 0.88 0.85
0.88 0.84 0.81
0.84 0.80 0.77
0.81 0.77 0.73
0.78 0.73 0.70
0.75 0.71 0.68
0.72 0.68 0.65
Fixture
ColorBlast Powercore gen4 RGB, 100 – 277 VAC, 10° x 40° Asymmetric Spread Lens, White Housing, UL/CE
Spread lens sold seperately
Copyright © 2016 Philips Solid-State Lighting Solutions, Inc. All rights
reserved. Chromacore, Chromasic, CK, the CK logo, Color Kinetics,
the Color Kinetics logo, ColorBlast, ColorBlaze, ColorBurst, eW Fuse,
ColorGraze, ColorPlay, ColorReach, iW Reach, EvenBalance eW Reach,
DIMand, EssentialWhite, eW, iColor, iColor Cove, IntelliWhite, iW, iPlayer,
Optibin, PureGlow and Powercore are either registered trademarks or
trademarks of Philips Solid-State Lighting Solutions, Inc. in the United
States and / or other countries. All other brand or product names are
trademarks or registered trademarks of their respective owners. Due to
continuous improvements and innovations, specifications may change
without notice.
DAS-000008-06 R01 03 Feb 2016
1.16
1.10
1.04
0.98
0.94
0.89
0.85
0.82
0.79
0.76
0.73
1.16
1.08
1.01
0.94
0.89
0.85
0.81
0.77
0.74
0.71
0.68
1.00
0.95
0.91
0.87
0.83
0.79
0.76
0.73
0.70
0.67
0.65
1.06 1.06 1.06
1.02 1.01 1.00
0.98 0.96 0.94
0.93 0.91 0.88
0.90 0.86 0.84
0.86 0.83 0.80
0.83 0.79 0.76
0.80 0.76 0.73
0.77 0.73 0.70
0.74 0.70 0.67
0.72 0.68 0.65
1.02 1.02 1.02
0.99 0.98 0.97
0.95 0.93 0.92
0.91 0.89 0.87
0.88 0.85 0.83
0.85 0.82 0.79
0.81 0.78 0.76
0.79 0.75 0.73
0.76 0.72 0.70
0.73 0.70 0.67
0.71 0.67 0.65
1.00
0.95
0.90
0.86
0.82
0.78
0.75
0.72
0.69
0.66
0.64
For lux multiply fc by 10.7
Fixture and Accessories
Accessories
Accessories
Diffuser Trim Ring
Louver
Rock Guard
Half Glare Shield
Full Glare Shield
Spread Lens, 20°
Spread Lens, 40°
Spread Lens, 60°
Spread Lens, 80°
Spread Lens, 10°x40°
Power Supplies
Data Enabler Pro, 3/4 in / 1/2 in NPT (U.S. trade size conduit)
Data Enabler Pro, PG21/PG13 (metric size conduit)
Beam Width
348 fc
Use Item Number when ordering in North America.
Item Number
Philips 12NC
123-000155-00
912400130351
120-000185-00
120-000185-04
120-000185-06
120-000185-13
120-000185-02
120-000185-08
120-000185-09
120-000185-10
120-000185-11
120-000185-12
912400130336
912400130340
912400130342
912400130349
912400130338
912400130344
912400130345
912400130346
912400130347
912400130348
106-000004-00
106-000004-01
910503701210
910503701211
Philips Color Kinetics
3 Burlington Woods Drive
Burlington, Massachusetts 01803 USA
Tel 888.385.5742
Tel 617.423.9999
Fax 617.423.9998
www.philipscolorkinetics.com
Download