Job Name: Contact: Ordering Code: Fixture Type: LED Dimming Driver Description The LED Dimming Driver is a Class II power supply rated for operating LEDs. It features dimmable line-voltage input and a constant current output. The encapsulated electronics and inherent protection adds reliability to both the driver and LEDs connected. To avoid damaged to LEDs, the number of fixtures connected must be within the range limits listed for the driver and be wired in series. Use 18-20 gauge wire for remote installation up to a maximum of 10ft. National and local codes should be followed during installation. Enclosure box version is listed for code requirements. Please contact manufacturer for further details. 1 1/4" 1 3/4" 7 1/8" 11 7/8" 1 3/4" 3 1/8" Electrical / LED Driver • 100-277V AC, 50/60Hz input • constant current output • Dimmable with Trailing Edge dimmers • Operating temperature: -4°F to 140°F Listings Class II rated • Suitable for dry and damp location • Short circuit protection • Overload protection • Over-voltage protection, self-resetting • Thermal protection Ordering Codes Follow the steps to specify, example: P70453 - 500 BASE OUTPUT 70453 LED driver P70453 LED driver w/ box 350 18W, 350mA 500 26W, 500mA 700 36W, 700mA v.11.6.15 Bruck Lighting By Ledra Brands Inc. 15774 Gateway Circle Tustin, CA 92780 p:714.259.9959 f:714.259.9969 In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. www.brucklighting.com