CR460 Series Lighting Contactors

advertisement
GE
CR460 Series Lighting Contactors
Contact position indication – when
button protrudes, contact is closed
Convenient side access field power
wiring
Easily installed power poles change
from NO to NC (or vice versa) simply
by unlatching and repositioning
Robust pole terminals accept up to two
#8 AWG wires
A simple kit easily converts electrically
held units to mechanically held and
includes a 2- or 3-wire control module
Plug-in auxiliary contacts are NO when
installed on the left side of the contactor,
NC on the right
Finger and back-of-hand safe power
terminals
The ultimate in versatility, simplicity and performance
• Contactors switch ballast (fluorescent or HID), tungsten and general use loads,
and carry motor load, resistive and pilot duty ratings
• Electrically and mechanically held forms available with up to 12 poles
(maximum of 8NC)
• Auxiliary contacts, rated A600, suitable for use on low level circuits down to 12V, 5mA
• Wide array of enclosure options: NEMA Types 1, 12/3R, 4/4X
• Compact, easy-to-handle, modern design with common footprint across all forms
• Available as ready-to-assemble components, standard assembled contactors or
modified assembled contactors
imagination at work
CR460 Series Lighting Contactors
The ultimate in versatility,
simplicity and performance
Quick Selector
1. Choose Basic Contactor.
Coil Voltage – Replace * in base catalog number with
appropriate coil digit from the table below.
Combined with other appropriate components, basic contactors
allow configuration into any available electrically or mechanically
held model. Includes power poles.
Description
Cat. No.
Base with 1NO-1NC
Base with 2NO
CR463L11A*A
CR463L20A*A
Coil Voltage
AC, 60 Hz AC, 50 Hz
24V
20V
28V
24V
Suitable for electrically or
115-120V
110V
mechanically held contactors
200-208V
—
230-240V
220V
277V
240V
Suitable for electrically held
347V
—
contactors. CPT required if used 460-480V
440V
with mechanically held contactors
575-600V
550V
List Price,
GO-10MB
$165.00
160.00
2. Select Power Poles.
Coil
Digit
C
D
J
L
S
N
T
U
Y
List Price,
CR460 Series basic contactors accept up to 6 single- or double-pole power poles.
Power Poles
Cat. No.
GO-10MB
These can be used to form up to:
Single Pole
CR460XP31
$43.00
• 12 NO poles when 6 double-poles are used in the NO positions (1-6) or
Double Pole
CR460XP32
82.00
• 8 NC poles with 4 double-poles in the NC positions (1-4) + 4 NO poles
with 2 double-poles in the 2 NO positions (5-6)
Packaged individually and overpacked in multiple of 5.
3. Select Conversion Kit (for Mechanically Held Contactors Only).
Coil Volts
Kits for converting electrically held contactors to a mechanically held version. Kits includes control module, latch, latch
cover and auxiliary contacts plus installation instructions.
Conversion kits are suitable for coil voltages 277V and
below. Use CPT to reduce coil voltage if line voltage is
higher than 277V (see Fuse and Transformer Kits table).
4. Do You Need Auxiliary Contacts?
Control
2-wire
24-277Vac
3-wire
Control Volts
24 Vac
110-120 Vac
200-277 Vac
12-24 Vdc
24 Vac
110-120 Vac
200-277 Vac
12-24 Vdc
Cat. No.
List Price, GO-10MB
CR460XMB
$105.00
CR460XMC
105.00
CR460XMD
CR460XMD
105.00
CR460XME
105.00
CR460XMM
115.00
115.00
CR460XMN
CR460XMP
115.00
CR460XMR
115.00
5. Do You Need an Enclosure?
Auxiliary Block
Single Pole
Double Pole
Cat. No.
CR460XB1
CR460XB2
List Price, GO-10MB
$9.00
17.00
Each contactor may use one single or one double auxiliary
contact block on each side of the base. When installed on
the left side the contacts are NO, when installed on the
right side the contacts are NC. This allows a total of 2NO + 2NC contacts maximum.
Wih provision for CPT
and/or pilot device
List Price,
Cat. No.
GO-10 MB
CR460XE1D
$83.00
—
—
CR460XE2D
140.00
CR460XE4D
235.00
With no CPT or pilot device
Enclosure
Type
Cat. No.
1
Type 1, Flush Mount
12/3R
4
CR460XE1B
CR460XE8B
CR460XE2B
—
List Price,
GO-10 MB
$43.00
80.00
100.00
—
6. Do You Need Pilot Devices or Pilot Lights?
Enclosure accessory kits contain accessory and complete installation wiring and hardware. Some kits contain multiple nameplates for alternate markings.
Pilot Devices
Pilot Light Voltage
Pilot Lights
Pilot Device
ON/OFF Push Button (Momentary)
ON/OFF or OFF/AUTO Selector Switch (Maintained)
ON/OFF Selector Switch, Spring Return to Center
H-O-A or ON/OFF/AUTO Selector Switch
H-O-A or ON/OFF/AUTO Keyed Selector Switch
(Removal All Positions)
Application
Electrically Held
Mechanically Held
Without
With 2-wire 3-wire
Interlock Interlock Control Control
Aux.
Aux. Module Module
X
X
X
X
X
X
X
X
X
Pilot light kits come with interchangeable
red and green lenses. Pilot lights may
List Price,
require auxiliary contacts.
Cat. No.
GO-10MB
CR460XP1
CR460XP2
CR460XP3
CR460XP4
$122.00
122.00
122.00
122.00
X
CR460XP5
158.00
Cat. No.
CR460XF
List Price, GO-10MB
$155.00
X
List Price,
GO-10MB
Standard ON or OFF CR460XLB* $152.00
Push-to-Test ON or OFF CR460XLD* 170.00
Type
Nameplate
Cat. No.
7. Do You Need Fuses or CPTs?
Contactor Type
Without CPT
Kit
Control Circuit Fuses Kit
CPT Primary Volts (60Hz) CPT Secondary Volts
208
220-240
120V
277
W ith 100VA CPT
440-480
(includes 2
600
primary and 1
120
secondary fuse)
208
220-240
24V
277
440-480
600
CR460XTB
CR460XTC
CR460XTD
CR460XTE
CR460XTF
CR460XTL
CR460XTM
CR460XTN
CR460XTP
CR460XTR
CR460XTS
$347.00
347.00
347.00
347.00
347.00
347.00
347.00
347.00
347.00
347.00
347.00
Replace * in pilot
light catalog number
with appropriate
voltage digit from
the table below.
Voltage
24 Vac/dc
120 Vac
208 Vac
240 Vac
277 Vac
347 Vac
480 Vac
600 Vac
Digit
C
J
L
S
N
T
U
Y
8. Order Spare Coils if required.
Coil Voltage
AC, 60 Hz AC, 50 Hz
24V
20V
28V
24V
115-120V
110V
200-208V
—
230-240V
220V
277V
240V
347V
—
460-480V
440V
575-600V
500V
Cat. No.
CR460XCC
CR460XCD
CR460XCJ
CR460XCL
CR460XCS
CR460XCN
CR460XCT
CR460XCU
CR460XCY
List Price,
GO-10MB
$45.00
45.00
45.00
45.00
45.00
45.00
45.00
45.00
45.00
May be connected in the field for 440-480 volts, but will require two 0.5 amp primary fuses.
Items highlighted in yellow are currently stocked at Viking Electric Supply.
GE Industrial Systems
DEP-124A 1202
General Electric Company
41 Woodford Avenue, Plainville, CT 06062
www.GEindustrial.com
© 2002 General Electric Company
Download