Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M DRILLING & SLEDGE HAMMERS DEAD BLOW HAMMERS 483 485 PLASTIC AND RUBBER MALLETS AND HAMMERS BALL PEIN & CLAW HAMMERS 487 488 HOLLOW PUNCH SETS CHISELS, PUNCHES AND DRIFT PINS 491 492 ALIGNMENT BARS 503 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M TECHNICAL STANDARDS URREA manufactures its tools according to technical product standards. A technical product standard is a document specifying design and manufacturing guidelines to ensure adequate product performance under conditions that meet users’ requirements. These standards are issued by private or government bodies and associations. The only organization to issue international standards is known as ISO (International Organization for Standardization). It issues the ISO 9000 series, related to quality systems, although it also issues product technical standards. There are various associations that issue or used to issue standards, such as GSA/US FEDERAL, ASME, ANSI, ISO; similarly, in Europe there is DIN (Deutsches Institut für Normung e.V.) German Institute for Standardization, APPLICABLE STANDARDS FOR: HAMMERS AND MALLETS which groups together different organizations and committees dedicated to promoting the standardization and quality of products commercialized in Germany. The hand tool standards, known as Federal (in Mexico) are no longer updated and are being absorbed by ASME. The same is happening to standards issued by ANSI. Nowadays, ASME standards for hand tools are initially reviewed by committees formed by different tool manufacturers, users, and distributors so they can be approved and issued by ASME. SAE standards (in particular are those applicable to the aerospace industry) are stricter standards, that for the most part, demand smaller tool dimensions and greater resistance. APPLICABLE STANDARDS FOR: CHISELS, DRIFT PINS & PUNCHES B107.47M B107.48M B107.53M B107.56 B107.54 B148.97 “Ball Pein Hammers: Safety Requirements” “Body Repair Hammers: Safety Requirements” “Heavy Striking Tools: Safety Requirements” “Aluminum - Bronze Sand Casting” DIN7462: 1970-05 DIN7482: 1966-11 DIN5130: 1974-02 “Wooden hammers” “Wooden handles for eyed wood bits” “Copper hammers” DIN5138: DIN5139: DIN5143: DIN5154: DIN5155: DIN6450: DIN6451: DIN6455: DIN6458: DIN7200: DIN7250: DIN7254: DIN7255: GGG-C-330C GGG-B-101E “Hammer (Forged steel head)” 1973-03 1973-03 1973-03 1973-03 1973-03 1984-11 1985-01 1984-11 1984-11 1968-03 1984-11 1984-11 1984-11 DIN7256: 1984-11 GGG-C-313C GGG-H-86-C “Metal chisels: safety requirements” “Metal Punches and Drift Pins Safety Requirements” GGG-P-831E GGG-P-833A “Chisel Handles” “Firmer chisels with tang” “Mortise chisel” “Chisels; technical specifications” “Chisels; denominations” “Pin punches” “Cape chisels”DIN6453: 1984-11 “Flat chisels” “Grooving chisels” “Drift punches” “Hollow punches” “Center punches” “Mason chisels” “Engineers’ cold chisels and allied tools; technical specifications” “Pointed chisels” “Chisels, hand: cape, diamond point, cold, round nose and side Cutting” “Chisels. Tools blanks, Caltiking Tools and metal-forming Tools, Power Hammer” “Bars, Chisel, Pinch, Pry, Wrecking; digging; tamping, Digging, And Crowbars” “Punches; Center, coopers, drive pin, Aligning, and prick” “Punches, Cutting” 476 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M TECHNICAL STANDARDS STRIKING AND TENSION TESTS FOR HAMMERS AND MALLETS ASME B107.53M, B107.56 & B107.54 STANDARDS STRIKING TEST TENSION TEST DEVICE 10 RESULTADOS PRUEBA TENSION DE TENSIÓN MARTILLOS HAMMER AND MALLET TEST RESULTSY MARROS Lower Spec 1000 RESULTS 2000 3000 4000 5000 6000 1324-PN 1332-PN 1340-PN 3,500 RESULTS ASME/ANSI LB-PULG ASME/ANSI LB-INCH Lbf=Pounds force 250,0000 200,000 150,000 SUPERIOR QUALITY AFFORDABLE TOOLS 100,000 50,000 0 DESEMPEÑO DE MARROS DE ACERO Lbf. 3,000 2,500 2,000 1,500 1,000 500 Lbf. 0 DESEMPEÑO DE TENSIÓN DE MARTILLOS DE BOLA BALL PEIN HAMMER TENSION PERFORMANCE 477 1433G Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 1434G STRIKING After the striking test, the tool undergoes a tension test where a given force is applied parallel to the handle. The head must withstand the force without coming apart from the tool. TOOLS Consists of striking the tested hammer or mallet on a steel block a set number of times. The steel block must have a hardness between 92 and 105 °HRb. The tool's strike faces must not show any marks, fractures or deformations, or any type of failure. Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M TECHNICAL STANDARDS HAMMER AND MALLET HARDNESS TESTS ASTME 18 STANDARD A Rockwell hardness tester is used for this test. A load perpendicular to the testing surface is applied and the result directly depends on the diamond tip's penetration into the tested element (According to ASTME 18). HARDNESS TEST PRESS HARDNESS READINGS' STATISTICAL TEST PERFORMED ON URREA HAMMERS DUREZAS MEDIDAS EN MARTILLOS Lower Spec 45 47 49 SHORT-TERM CAPABILITY Op CPU CPL Opk Opm 16.92 Targ 21.93 USL 11.91 LSL 11.91 k * n Upper Spec RESULTS * 60.000 45.000 0.296 25.000 51 Mean Mean+3s Mean-3s s 53 50.2800 50.7233 49.8367 0.1478 55 57 %>USL Exp Obs %<LSL Exp Obs 0.00 0.00 0.00 0.00 59 PPM>USL Exp Obs PPM<LSL Exp Obs 0 0 0 0 FLEXION TESTS FOR HAMMERS AND MALLETS ASME B107.53M, B107.56 & B107.54 STANDARDS In this test the tool's head is firmly fastened. The other end is suspended and is positioned perpendicular to the grip. In the testing device, one of the strike faces will be positioned face down and a load will be applied on the handle's end, where users normally hold it, about 10" from the head's farthest point. The hammer or mallet must resist this test without breaking or fracturing. FLEXION TEST 478 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M SPECIFICATIONS AND STANDARDS HARDNESS TEST FOR CHISELS, PUNCHES, & DRIFT PINS ASTME 18 STANDARD This hardness test must be done on the striking area as well as on the cutting end. The test is performed using a Rockwell hardness tester, which features a diamond tip upon which a load perpendicular to the testing surface is applied. The result directly depends on the diamond tip's penetration into the tested element (According to ASTME 18). The hardness on the cutting end must be measured at no less than 1/4" from the edge. HARDNESS TEST PRESS HARDNESS READINGS' STATISTICAL TESTS PERFORMED ON URREA CHISELS DUREZAS MEDIDAS EN CINCELES Lower Spec RESULTS 49 SHORT-TERM CAPABILITY Targ USL LSL k n The chisel must be vertically mounted on a 1/4" diameter bar. The chisel's cutting line must form a 90° angle with the shaft's centering line. The bar must rest on a steel block weighing at least 200 lb (91 kg) and have a 35 HRc. The chisel is struck by a load according to its size. The load must be a piece of steel with a 45-60 HRc hardness. After repeating the impact 20 times, no fracturing or chipping should be visible, or any other type of damage, or failure. * 60.0000 48.0000 0.2917 12.0000 Mean Mean+3s Mean-3s s 55 52.2500 54.4260 50.0740 0.7253 57 %>USL Exp Obs %<LSL Exp Obs 0.00 0.00 0.00 0.00 PPM>USL Exp Obs PPM<LSL Exp Obs 0 0 0 0 IMPACT TEST FOR DRIFT PINS IMPACT TEST SUPERIOR QUALITY AFFORDABLE TOOLS 10 59 The chisel must be vertically mounted on a 1/4" thick steel plate with 45-50 HRc hardness. The plate must rest on a steel block at least 200 lb (91 kg) in weight and have a 35 HRc minimum hardness. The drift pin is struck by a load according to its size. The load must be a piece of steel with a 45-60 HRc hardness. After repeating the impact 20 times, no fracturing or chipping should be visible, or any other any other type of damage, or failure. 479 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 STRIKING 2.76 3.56 1.95 1.95 * IMPACT TEST FOR CHISELS IMPACT TEST 53 TOOLS Op CPU CPL Opk Opm 51 Upper Spec Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M QUICK SELECTION GUIDE FOR STRIKING TOOLS STRIKING TOOLS DRILLING & SLEDGE BRONZE HEAD WEIGHT 2 3 4 6 8 10 12 16 3.6 7 8 12 13 16 18 22 24 26 29 32 36 38 40 44 48 54 LB OZ For your PAGE PAGE DEAD BLOW RUBBER SET PAGE PAGE 1433GFV 1434GFV 1435GFV 1436GFV 1437GFV 1438GFV 1439GFV 1440GFV 1433G 1434G 1435G 1436G 1437G 1438G 1439G 1440G PAGE PAGE PAGE PAGE PAGE PAGE PAGE PAGE INTERCH. FACE PLASTIC RUBBER PAGE PAGE BALL PEIN PAGE BODYWORK PAGE PAGE PAGE 1308FV 1312FV 1308P 1312P 1308PN 1312PN 1316FV 1316P 1316PN 1324FV 1324P 1324E 1324PN 1332FV 1332P 1332E 1332PN 1340FV 1340P 1340PN 1348P 1348PN PAGE 483 483 484 484 485 485 485 486 486 486 486 487 487 487 488 488 489 488 490 1435DB 1436DB 1366 1439DB SF150HK 1383 SF150 1367 1434PDB 1364 1424 1428 1427 1421 1368 1430FV 1432FV 1326DB 1430 1430DBX 1344DB 1348DB 1432 convenience 1336DB the products in this catalog can be 1435PDB 1430DB 1432DB VISIT US ONLINE found on our Website at www. urreaprofessionaltools.com, a quick and free service available 24 hours a day. Thanks to its specialized search engine you can quickly and easily find the products you are looking for. www.urreaprofessionaltools.com (800) 366-6911 480 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M QUICK SELECTION GUIDE FOR STRIKING TOOLS STRUCK TOOLS CHISELS PUNCHES CENTERING 90O PAGE 492 SIZE PAGE 498 498 41-1/4 44-1/4 PAGE PAGE PAGE 496 496 497 PAGE PAGE 500 497 PAGE PAGE 500 500 96-1/4 50-3/16 50-1/4 86A-3/16 86A-1/4 76-1/4 72-1/4 96-5/16 50-5/16 86A-5/16 76-5/16 72-5/16 96-3/8 50-3/8 86A-3/8 76-3/8 72-3/8 96-7/16 50-7/16 86A-7/16 96-1/2 50-1/2 86A-1/2 76-1/2 86A-5/8 76-5/8 47-1/4X1/16 47-1/4X3/32 41-5/16 44-5/16 41-3/8 44-3/8 47-5/16X1/8 47-5/16X5/32 48-3/8X3/16 47-3/8X3/16 48-3/8X5/32 41-7/16 44-7/16 48-7/16X7/32 47-7/16X7/32 41-1/2 44-1/2 48-1/2X1/4 48-1/2X5/16 47-1/2X1/4 10 49920 41-5/8 44-5/8 49922 96-5/8 96-3/4 86A-3/4X8 86A-3/4X12 86A-7/8X8 86A-7/8X12 86A-1X8 86A-1X12 TOOLS THE BEST WARRANTY STRIKING 3/16” 1/4” 1/4” x 1/16” 1/4” x 3/32” 5/16” 5/16” x 1/8” 5/16” x 5/32” 3/8" 3/8” x 3/16” 3/8” x 5/32” 7/16” 7/16” x 7/32” 1/2” 1/2” x 1/4” 1/2” x 5/16” 1/2” x 7” 5/8” 3/4” 3/4” x 8” 3/4” x 12” 7/8” x 8” 7/8” x 12” 1” x 8” 1” x 12” PAGE DRILLING 50O URREA tools are designed to offer precision, quality and endurance. They are made by highly qualified employees. They are marked with the country of origin, following the strictest quality standards. HAND TOOLS PNEUMATIC TOOLS SUPERIOR QUALITY AFFORDABLE TOOLS www.urreaprofessionaltools.com (800) 366-6911 481 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M QUICK SELECTION GUIDE FOR STRUCK TOOLS BRONZE PUNCH CHISELS CENTER PUNCHES PIN PUNCHES LONG GUIDE PUNCHES SHORT GUIDE PUNCHES 49920 49922 86A-3/16 86A-1/4 86A-5/16 86A-3/8 86A-7/16 86A-1/2 86A-5/8 86A-3/4X8 86A-7/8X8 86A-1X8 41-1/4 41-5/16 41-3/8 41-1/2 41-5/8 44-5/16 44-3/8 48-3/8X5/32 48-3/8X3/16 48-7/16X7/32 48-1/2X1/4 48-1/2X5/16 47-1/4X1/16 47-1/4X3/32 47-5/16X1/8 47-5/16X5/32 47-3/8X3/16 47-7/16X7/32 47-1/2X1/4 96-1/4 96-5/16 96-3/8 96-7/16 96-1/2 96-5/8 96-3/4 50-3/16 50-1/4 50-5/16 50-3/8 50-7/16 50-1/2 5 PIECES 3 PIECES 49903 PAGE PAGE 86A 5 PIECES PAGE PAGE 86C 99B PAGE 5 PIECES 5 PIECES 48A PAGE PAGE PAGE 41A 5 PIECES NO.3 5 PIECES 5 PIECES 7 PIECES 86B NO.4 7 PIECES 96A 6 PIECES 10 PIECES 86D 50A 10 PIECES NO.2 PAGE PAGE PAGE PAGE PAGE PAGE 7 PIECES 12 PIECES NO.5 PAGE 47A 16 PIECES SIZE NO.6 26 PIECES CODE NO.46 STRUCK TOOL SETS PAGE PAGE 493 493 493 494 499 495 499 495 495 494 494 495 496 498 499 499 492 1/2” 3/4” 3/16” 1/4” 5/16” 3/8” 7/16” 1/2” 5/8” 3/4” x 8” 7/8” x 8” 1” x 8” 1/4” 5/16” 3/8” 1/2” 5/8” 5/16” 3/8” 3/8” x 5/32” 3/8” x 3/16” 7/16” x 7/32” 1/2” x 1/4” 1/2” x 5/16” 1/4” x 1/16” 1/4” x 3/32” 5/16” x 1/8” 5/16” x 5/32” 3/8” x 3/16” 7/16” x 7/32” 1/2” x 1/4” 1/4” 5/16” 3/8” 7/16” 1/2” 5/8” 3/4” 3/16” 1/4” 5/16” 3/8” 7/16” 1/2” 482 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M STRIKING TOOLS HAMMERS DEAD BLOW HAMMERS RUBBER MALLETS AND PLASTIC FACE HAMMERS BALL PEIN HAMMERS HOLE PUNCH SETS CHISELS, PUNCHES & DRIFT PINS ALIGNMENT BARS BRONZE HAMMERS Bronze head does not deform stricken materials. Impact-resistant oak handle. Fiberglass ergonomic handle 1432 1432FV BRONZE HAMMER WITH WOODEN HANDLE BRONZE HAMMER WITH FIBERGLASS HANDLE CODE FACE DIAMETER mm in. mm CODE FACE DIAMETER WEIGHT in. mm gm lb. 13 1/2 342.9 812 1.79 14 355.6 1750 3.85 STANDARD: FEDERAL GGG-H-33a Bronze hammers do not give off sparks when striking other metals, making them a very safe tool for use in flammable environments or for precision work such as bushings, transmissions, etc. SUPERIOR QUALITY AFFORDABLE TOOLS 1430 1432 in. mm 1 3/8 34.9 2 50.8 HEAD LENGTH TOTAL LENGTH L 10 WEIGHT in. mm in. mm gm. lb. 3 7/16 87.3 13 1/2 342.9 885 1.95 3 3/4 95.2 14 355.6 1700 3.74 STANDARDS: FEDERAL GGG-H-33a TOOLS 1430FV 1 3/8 34.9 3 7/16 87.3 1432FV 2 50.8 3 3/4 95.2 TOTAL LENGTH L 483 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 STRIKING in. HEAD LENGTH Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M STRIKING TOOLS HAMMERS DEAD BLOW HAMMERS RUBBER MALLETS AND PLASTIC FACE HAMMERS BALL PEIN HAMMERS HOLE PUNCH SETS ALIGNMENT BARS CHISELS, PUNCHES & DRIFT PINS STEEL OCTAGONAL SLEDGE HAMMERS • Carbon steel forged head, quenched and tempered. • 50 HRc hardness. • Beveled and polished faces. Epoxy resin connection guarantees secure hafting. ERICAN AM HICKORY 1435GFV OCTAGONAL SLEDGE HAMMER WITH FIBERGLASS HANDLE CODE HEAD WEIGHT FACE DIAMETER HEAD LENGTH ENGINEER SLEDGE HAMMER WITH AMERICAN HICKORY 16" HANDLE CODE HANDLE LENGTH WEIGHT lb. in. 1433GFV 2 1 5/8 1434GFV 3 1 3/4 1435GFV 4 2 1/16 1436GFV 6 2 3/16 1437GFV 8 2 3/8 1438GFV 10 2 1/2 1439GFV 12 2 11/16 1440GFV 16 2 15/16 mm 41 44 52 56 60 64 68 75 in. 4 1/2 5 1/8 5 5/8 6 6 1/2 6 7/8 7 11/16 8 7/16 1436G 1433EG mm in. mm gm lb. 114 15 1/4 387 1135 2.5 130 15 1/4 387 1620 3.6 143 15 1/4 387 2230 4.9 152 36 914 3400 7.5 165 36 914 4300 9.5 175 36 914 5210 11.5 195 36 914 6120 13.5 214 36 914 7930 17.5 HEAD WEIGHT lb. 1433EG 2 1434EG 3 1435EG 4 FACE DIAMETER in. 1 5/8 1 3/4 2 1/16 mm 41 44 52 HEAD LENGTH in. 4 1/2 5 1/8 5 5/8 mm 114 130 143 HANDLE LENGTH in. 16 16 16 STEEL OCTAGONAL SLEDGE HAMMER, AMERICAN HICKORY 36" HANDLE CODE WEIGHT gm lb. 1430 3.2 1680 3.7 2350 5.2 STANDARDS: ASME B107.54, FEDERAL GGG-H-86 1436G 1437G 1438G 1439G 1440G HEAD FACE WEIGHT DIAMETER lb. 6 8 10 12 16 in. 2 3/16 2 3/8 2 1/2 2 11/16 2 15/16 HEAD LENGTH HANDLE LENGTH mm in. mm 56 6 152 60 6 1/2 165 64 6 7/8 175 68 7 11/16 195 75 8 7/16 214 in. 36 36 36 36 36 mm 914 914 914 914 914 WEIGHT gm lb. 3340 7.4 4220 9.3 5140 11.3 6100 13.4 7850 17.3 STANDARDS: ASME B107.54, FEDERAL GGG-H-86 STANDARDS: FEDERAL GGG-H-86c, ASME B107.54 Standard eye ERICAN AM HICKORY 1435G Includes wood and metal wedges 1433G CAB10UH 1434G Double wedge hafting, with wood and metal. STEEL OCTAGONAL SLEDGE HAMMER, AMERICAN HICKORY 12" HANDLE CODE HEAD WEIGHT 1433G 1434G 1435G lb. 2 3 4 FACE DIAMETER in. 1 5/8 1 3/4 2 1/16 mm 41 44 52 HEAD LENGTH in. 4 1/2 5 1/8 5 5/8 mm 114 130 143 HANDLE LENGTH in. 12 12 12 SPARE HANDLES FOR AMERICAN HICKORY SLEDGE HAMMERS CODE WEIGHT gm lb. 1085 2.4 1570 3.5 2150 4.7 STANDARDS: ASME B107.54, FEDERAL GGG-H-86 CAB7UH CAB10UH TOTAL LENGTH L in. 12 36 mm 305 914 gm lb. 180 0.40 675 1.50 USED IN: • Construction • Industrial Maintenance • Railroad Industry • Mining NOTE: These are not non-spark sledge hammers. Not recommended in flammable, volatile, or corrosive environments. 484 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M STRIKING TOOLS HAMMERS DEAD BLOW BLOW DEAD HAMMERS HAMMERS RUBBER MALLETS AND PLASTIC FACE HAMMERS BALL PEIN HAMMERS HOLE PUNCH SETS ALIGNMENT BARS CHISELS, PUNCHES & DRIFT PINS INTERCHANGEABLE FACE DEAD BLOW HAMMERS These hammers have two main characteristics. First, any deformations deriving from the strike action occur on the hammer faces and not on the stricken object. Second, the hammer's hollow head is filled with steel shot. This shot works as a strike vibration dissipater, preventing the hammer from bouncing with each blow, thus creating a dead blow. Steel shot in side head. SF150HK Fiberglass handle with rubber grip minimizes the vibration felt on the hand. The dead blow hammer with interchangeable faces is mainly used in the assembly of machinery parts, where it is important that surfaces stricken do not get damaged. SF150HK 9-PIECE SET SF150 Includes 8 faces 16 OZ. WITH INTERCHANGEABLE FACES SF150 C O N T EN T S HEAD DIAMETER HEAD LENGTH HEAD in. mm 1 1/2 38.1 SF15ST SF15M SF15T TOTAL in. mm gm lb. 11 1/2 292.1 1374 3.02 SF15MH SF15H Hard (black) Soft (brown) Extra hard (yellow) Medium (red) Steel Rugged use (green) Hammer Medium rough (beige) 1 Plastic case HEAD DIAMETER HEAD LENGTH TOTAL LENGTH L TOTAL in. mm 1 1/2 38.1 in. mm 4 101.6 in. mm 11 1/2 292.1 gm lb. 586 1.29 HEAD SF15XH SF16S lb. oz. 1 16 SF16B FIXED FACE DEAD BLOW HAMMER Strike deformations occur on the faces, not on the object. 10 16 OZ. DEAD BLOW HAMMER (DOES NOT INCLUDE INTERCHANGEABLE FACES) TOOLS SF15SS in. mm 4 101.6 Face assortment: Super soft (gray) Non-slip, shock absorbtion handle 9 interchangeable faces, each with a different Shore or Rockwell hardness, measurement used to assign a hardness value on soft materials such as plastic, rubber, non-tempered steel, etc. INTERCHANGEABLE FACES FOR 1 1/2” DEAD BLOW HAMMERS CODE SF15SS STRIKE FORCE SUPER SOFT SOFT SF15ST MEDIUM SF15M RUGGED SF15T SF15MH MEDIUM HARD HARD SF15H SF15XH EXTRA HARD SOLID SF16S SOLID SF16B FACE COLOR LIGHT GRAY HARDNESS Indestructable fiber glass handle 1430DBX MATERIAL SHORE A PVC INSTANTANEOUS, 45-58 BROWN SHORE A 30 SEC, 45-58 PVC RED PVC SHORE A 30 SEC, 59-72 GREEN PVC SHORE A 30 SEC, 59-73 BEIGE SHORE D 30 SEC, 40-48 POLYURETHANE BLACK SHORE D 30 SEC, 49-65 POLYURETHANE YELLOW SHORE D 30 SEC, 65-86 POLYURETHANE STEEL FACE 38-46 HRC STEEL BRONZE FACE 74-76 HRB BRONZE HIGH-IMPACT, FIXED FACE DEAD BLOW HAMMER HEAD DIAMETER HEAD LENGTH TOTAL LENGTH L TOTAL in. mm 5 127 in. mm 13 3/4 349.2 gm lb. 907 2.0 HEAD lb. oz. 2 32 in. 2 mm 50.8 Indestructible non-slip fiberglass handle with Super Grip. Reinforced faces. SUPERIOR QUALITY AFFORDABLE TOOLS STRIKING lb. oz. 1 16 TOTAL LENGTH L 485 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M STRIKING TOOLS DEAD BLOW BLOW DEAD HAMMERS HAMMERS HAMMERS RUBBER MALLETS AND PLASTIC FACE HAMMERS BALL PEIN HAMMERS HOLE PUNCH SETS ALIGNMENT BARS CHISELS, PUNCHES & DRIFT PINS DEAD BLOW IMPACT AND DEAD BLOW SLEDGE HAMMERS Fiber glass handle with rubber grip minimizes hand vibration Steel shot inside head dissipates vibration 1432DB 1435PDB HEAVY-DUTY HIGH-IMPACT HAMMER CODE HEAD HEAD DIAMETER LENGTH HEAD lb. oz. in. mm in. mm HIGH-IMPACT HAMMER TOTAL LENGTH L in. CODE TOTAL mm gm lb. 1430DB 2 32 2 50.8 4 3/8 111.1 13 3/4 349.2 907 2.00 1432DB 3 48 2 3/4 69.8 4 3/4 120.6 14 11/16 373.0 1360 3.00 The high-impact dead blow hammer, in addition to featuring a head filled with steel shot that makes it weigh more, also has a greater contact area, very useful in the assembly of machinery parts requiring great force. Heads are partially filled with steel shot HEAD DIAMETER HEAD LENGTH TOTAL LENGTH L in. in. mm in. HEAD lb. oz. mm mm TOTAL gm lb. 1434PDB 1 16 1 51/64 45.7 5 1/8 130.1 12 1/4 311.1 454 1.00 1435PDB 1.5 24 1 51/64 45.7 5 1/8 130.1 12 1/4 311.1 680 1.50 The body is composed of a steel body with two fixed faces made of cellulose acetate, designed for use on metals and other materials susceptible to strike marks or deformations. The deformation is absorbed and occurs on the face, not on the stricken object. 1439DB 1326DB DEAD BLOW IMPACT SLEDGE HAMMERS CODE 1435DB 1436DB 1439DB FACE DIAMETER in. 2 9/16 2 3/4 3 1/8 mm 65 70 80 HEAD LENGTH in. 5 7/16 7 3/32 8 mm 138 180 203 TOTAL LENGTH L in. 15 1/8 20 36 1/2” DEAD BLOW BALL PEIN HAMMERS CODE TOTAL mm gm lb. 385 1642 3.6 508 3175 7.0 927 5380 11.9 1435DB • Made of one piece from high-impact polyurethane, resistant to chemicals. • Head filled with steel shot is heavier. • Does not bounce or give off sparks. • Does not damage any surfaces. • More resistant to cuts, indentations, and abrasion than rubber hammers. • Flat faces deliver better strikes. • Non-slip handle. • Handle's bottom features a wide end cap to prevent the tool from slipping off hands. • Ideal for any type of application. 1326DB 1336DB 1344DB 1348DB HEAD DIAMETER in. 1.23 1.47 1.68 1.68 mm 31 37 43 43 HEAD LENGTH in. 4.25 4.5 4.88 4.88 mm 108 114 124 124 TOTAL LENGTH L in. 12.75 13 13.5 16.25 TOTAL mm gm oz. 323 737 26 330 1021 36 342 1247 44 412 1361 48 • Body made of high-impact polyurethane, resistant to chemicals. • Face and ball made of steel alloy. • Beveled strike face does not produce shrapnel. • Ball machined with accurate radii to deliver better impacts. • Non-slip handle. • Handle's bottom features wide end cap to prevent tool from slipping off hands. 486 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M STRIKING TOOLS DEAD BLOW HAMMERS HAMMERS BALL PEIN HAMMERS RUBBER MALLETS AND PLASTIC FACE HAMMERS HOLE PUNCH SETS ALIGNMENT BARS CHISELS, PUNCHES & DRIFT PINS RUBBER MALLETS Mallets with rubber heads are ideal for mechanics, bodyworkers, brass workers and carpenters. Very useful for striking large pieces requiring special care. RUBBER HEAD MALLET CODE HEAD DIAMETER HEAD LENGTH HEAD lb. oz. 0.5 8 1 16 1.4 22 1366 1367 1368 in. 1 25/32 2 3/16 2 5/8 mm 45.2 55.5 66.6 in. 3 1/16 3 3/4 4 1/2 mm 77.7 95.2 114.3 Cylindrical head delivers greater impact area. TOTAL LENGTH L in. 12 1/2 14 1/2 16 19/32 TOTAL mm 317.5 368.3 421.8 gm. 226 454 635 lb. 0.50 1.00 1.40 1368 Oak handle provides excellent impact resistance. Head made of neoprene rubber that delivers strong blows without damaging the stricken object. STANDARDS: FEDERAL GGG-H-33a PLASTIC OR RUBBER FACE HAMMERS Fixed plastic face hammers are used for striking soft materials that do not require a lot of force. Lower vibration through hand and arm. Plastic face with 60° Shore hardness for soft strikes. Plastic face with 95° Shore hardness for solid strikes. 10 Fiberglass handle, rubber covered. HEAD DIAMETER in. mm 1 5/6 33.3 1364 1364 1383 HAMMER WITH FIXED PLASTIC FACES FIBBERGLASS HANDLE HEAD LENGTH in. mm 3 15/32 88.1 TOTAL LENGTH L TOTAL in. 12 gm lb. 350 0.77 mm 304.8 TOOLS Compact oak handle offers excellent impact resistance. 1383 1383FV STRIKING Center cast in Zamak for solid impacts. Resistant plastic faces prevent hammer from bouncing. Resistant plastic faces prevent hammer bouncing. HAMMER WITH INTERCHANGEABLE RUBBER FACES HAMMER WITH FIXED PLASTIC FACES HEAD DIAMETER HEAD LENGTH in. mm 1 5/6 33.3 in. mm 3 15/32 88.1 STANDARDS: FEDERAL GGG-H-33a TOTAL LENGTH L TOTAL in. 12 gm lb. 360 0.79 mm 304.8 STANDARDS: FEDERAL GGG-H-33a HEAD DIAMETER in. mm 1 1/2 38.1 HEAD LENGTH in. 3 3/8 TOTAL LENGTH L mm 85.7 in. 12 mm 304.8 TOTAL gm lb. 385 0.85 1 STANDARD: FEDERAL GGG-H-33a FACT SHEET FOR 1383FV HAMMERS WITH PLASTIC FACES FEDERAL STANDARD CHARACTERISTICS GGG-H-33a FACT SHEET FOR 1383 HAMMERS WITH PLASTIC FACES FEDERAL STANDARD CHARACTERISTICS GGG-H-33a CODE CODE SHORE STRIKE TYPE HARDNESS A 1383 78 25 PLASTIC FACES HEAD OZ. HEAD gm. 13 360 SHORE STRIKE TYPE 25 PLASTIC FACES HARDNESS A 1383 78 HEAD OZ. HEAD gm. 13 360 T INTERCHANGEABLE FACES FOR HAMMERS SF150 AND 1364 CODE 1364XS Extra soft gray face SUPERIOR QUALITY AFFORDABLE TOOLS 1364T Rugged use beige face STRIKE TYPE 1364XS EXTRA SOFT 1364T RUGGED USE SHORE HARDNESS FACE COLOR SIZE 60 95 DARK GRAY BEIGE 1 1/2” 1 1/2” STANDARD: FEDERAL GGG-H-33b 487 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M STRIKING TOOLS HAMMERS DEAD BLOW HAMMERS RUBBER MALLETS AND PLASTIC FACE HAMMERS BALL PEIN BALL PEIN HAMMERS HAMMERS HOLE PUNCH SETS CHISELS, PUNCHES & DRIFT PINS ALIGNMENT BARS BALL PEIN HAMMERS Ball pein hammers allow you to work on rivets and metal surfaces. Forged and tempered steel alloy head, polished and varnished. ERICAN AM HICKORY Epoxy resin connection guarantees secure hafting. 1332FVS 1340FV BLACK BALL PEIN HAMMER WITH FIBBERGLASS HANDLE CODE HEAD oz. gm 1332FVS 32 907 1324FVS 24 680 TOTAL LENGTH L in. 7 7/8 7 7/8 mm 200 200 TENSION RESISTANCE TOTAL ASME B107.53M LB-INCH gm lb. 1165 2.56 1010 2.26 lbf 2250 2250 STANDARDS: FEDERAL: GGG-H-86C, ASME B107.53, NMX-O-103 Fiberglass handle with rubber grip minimizes the vibration felt on the hand. American Hickory handle, polished and lacquered. 1332P POLISHED BALL PEIN HEAD WITH FIBERGLASS HANDLE TOTAL LENGTH L CODE HEAD 1308FV 1312FV 1316FV 1324FV 1332FV 1340FV oz. 8 12 16 24 32 40 gm 227 340 454 680 907 1134 in. 11 1/4 12 1/2 12 1/2 14 1/4 14 1/4 15 3/4 mm 286 318 318 362 362 400 POLISHED BALL PEIN HEAD WITH AMERICAN HICKORY HANDLE TENSION RESISTANCE ASME B107.53M TOTAL LB-INCH gm 384 548 662 970 1197 1508 lb. 0.84 1.21 1.46 2.14 2.64 3.32 lbf 1500 1500 2250 2250 2250 2250 STANDARDS: FEDERAL:GGG-H-86C, ASME B107.53M NMX-O-103 CODE HEAD 1308P 1312P 1316P 1324P 1332P 1340P 1348P oz. 8 12 16 24 32 40 48 gm 227 340 454 680 907 1134 1361 TOTAL LENGTH L in. 12 3/8 14 14 16 1/4 16 1/4 18 18 mm 314 356 356 413 413 454 454 TENSION RESISTANCE ASME B107.53M TOTAL LB-INCH gm 333 522 636 912 1139 1402 1629 lb. 0.73 1.15 1.40 2.01 2.51 3.09 3.59 lbf 3800 3800 4200 4200 4200 4200 4200 STANDARDS: FEDERAL:GGG-H-86C, ASME B107.53, NMX-O-103 BALL PEIN HAMMERS FACT SHEET BALL PEIN HAMMERS FACT SHEET ASME B107.53M STANDARD ASME B107.53M STANDARD CODE HARDNESS O RC TENSION LBF FLEXION LBF STRIKE 1308FV 1312FV 1316FV 1324FV 1332FV 1340FV 45-60 45-60 45-60 45-60 45-60 45-60 400 400 400 1000 1000 1000 40 60 80 150 150 175 20 20 20 20 20 20 CODE HARDNESS O RC TENSION LBF FLEXION LBF STRIKE 1308P 1312P 1316P 1324P 1332P 1340P 1348P 45-60 45-60 45-60 45-60 45-60 45-60 45-60 750 750 2250 2250 2250 2250 2250 40 60 80 150 150 175 175 20 20 20 20 20 20 20 488 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M STRIKING TOOLS DEAD BLOW HAMMERS HAMMERS RUBBER MALLETS AND PLASTIC FACE HAMMERS BALL PEIN BALLHAMMERS PEIN HAMMERS ALIGNMENT BARS CHISELS, PUNCHES & DRIFT PINS Forged steel alloy head, quenched and tempered, blued finish. 49 to 55 HRc hardness on striking faces. Tempered eye. Double heat-treated forged steel head. Hafted with metal and wood wedges to lock head and handle together. Phosphatized head prevents corrosion. HOLE PUNCH SETS Includes wood and metal wedges. ERICAN AM American Hickory handle. Ergonomic oak handle prevents slippage. Oak handle offers excellent impact resistance. CAB3UH 1332E 1324PN BLACK BALL PEIN HAMMER WITH ERGONOMIC HANDLE BLACK BALL PEIN HAMMER CODE in. gm 227 12 3/8 14 340 14 454 680 16 14 907 16 1/4 1134 17 1361 17 mm 314 356 356 413 413 432 432 gm 333 522 636 912 1139 1402 1629 lb. 0.73 1.15 1.40 2.01 2.51 3.09 3.59 lbf 3800 3800 4200 4200 4200 4200 4200 STANDARDS: FEDERAL:GGG-H-86C, ASME B107.53, NMX-O-103 CODE HEAD 1324E 1332E oz. gm 24 680 32 907 ASME B107.53M STANDARD CODE HARDNESS O RC TENSION LBF FLEXION LBF STRIKE 1308PN 1312PN 1316PN 1324PN 1332PN 1340PN 1348PN 45-60 45-60 45-60 45-60 45-60 45-60 45-60 750 750 2250 2250 2250 2250 2250 40 60 80 150 150 175 175 20 20 20 20 20 20 20 in. 16 1/4 16 1/4 mm 413 413 gm lb. 912 2.01 1139 2.51 lbf 4200 4200 STANDARDS: FEDERAL: GGG-H-86C, ASME B107.53, NMX-O-103 TOTAL LENGTH L CODE CAB1UH CAB2UH CAB3UH CAB4UH in. 12 14 16 18 mm 305 356 406 457 TOTAL gm 108 130 214 266 lb. 0.24 0.34 0.47 0.59 HAMMERS 8 oz. 12 & 16 oz. 24 & 32 oz. 40 & 48 oz. BALL PEIN HAMMERS FACT SHEET ASME B107.53M STANDARD CODE HARDNESS O RC 1324E 1332E BALL PEIN HAMMERS FACT SHEET TENSION RESISTANCE TOTAL ASME B107.53M LB-INCH TOTAL LENGTH L 10 SPARE AMERICAN HICKORY HANDLE FOR BALL PEIN HAMMERS TOOLS 1308PN 1312PN 1316PN 1324PN 1332PN 1340PN 1348PN oz. 8 12 16 24 32 40 48 TENSION RESISTANCE TOTAL ASME B107.53M LB-INCH 45-60 45-60 TENSION LBF FLEXION LBF STRIKE 150 175 20 20 1000 1000 CAB6U Includes wood and metal wedges. SPARE OAK ERGONOMIC HANDLE 1324E AND 1332E TOTAL LENGTH L in. 16 mm 406 Oak handle. TOTAL gm 200 lb. 0.4 SUPERIOR QUALITY AFFORDABLE TOOLS HAMMERS 24 & 32 oz. CAB6U 489 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 STRIKING HEAD TOTAL LENGTH L HICKORY Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M STRIKING TOOLS RUBBER MALLETS AND PLASTIC FACE HAMMERS DEAD BLOW HAMMERS HAMMERS BALL PEIN BALLHAMMERS PEIN HAMMERS HOLE PUNCH SETS ALIGNMENT BARS CHISELS, PUNCHES & DRIFT PINS BODYWORK HAMMERS Bodywork hammers are used to repair car dents. Their heads feature radii and geometries that make the heads fit very well in the various shapes found in bodywork. 1421 Impact-resistant oak handle. BODYWORK HAMMER WITH TWO FACES Also called a dinging or engravers hammer 1421 FACE DIAMETER FACE DIAMETER HEAD LENGTH in. mm 1 5/8 41.2 in. mm 1 1/4 31.7 in. mm 6 152.4 TOTAL LENGTH L in. mm gm lb. 13 3/4 349.2 515 1.14 STANDARDS: FEDERAL GGG-H-20A, ASME B107.56 BODYWORK HAMMERS FACT SHEET Bodywork hammer with two round, flat faces. Features double heat-treated, steel alloy forged head. This hammer is ideal for work on dents, wrinkles, undulations, and other bodywork damage. ASME B107.56 STANDARD CODE HARDNESS TENSION O RC LBF 1421 1424 1427 1428 45-60 25-30 25-30 25-30 CHARACTERISTICS FLEXION LBF STRIKE 25 60 80 150 20 20 20 20 400 400 400 400 HEAD OZ. HEAD gm 13 16 16 16 368 453 453 453 Also called a dinging hammer These are also called finishing hammers 1427 1428 1424 1428 1424 1427 HEAD DIAMETER HEAD LENGTH TOTAL LENGTH L in. mm 1 3/8 34.9 in. mm 4 1/2 114.3 in. mm 12 1/4 311.15 BLUNT POINT AND ROUND FACE HAMMER SQUARE AND ROUND FACE HAMMER FLAT TIP AND ROUND FACE HAMMER gm lb. 322 0.71 STANDARDS: FEDERAL GGG-H-20A, ASME B107.56 Hammer with round face and flat tip for finishes on edges and molds. HEAD DIAMETER HEAD LENGTH in. mm 1 1/4 31.7 in. mm 4 101.6 HEAD DIAMETER TOTAL LENGTH L in. 13 mm 330.2 gm lb. 350 0.77 STANDARDS: FEDERAL GGG-H-20A, ASME B107.56 Square and round face hammer, quenched and tempered with 43-45 °RC. Smooths damaged metallic surfaces, especially corner areas. in. 1 1/2 mm 38.1 HEAD LENGTH in. mm 5 7/8 149.2 TOTAL LENGTH L in. 14 mm 355.6 gm lb. 326 0.72 STANDARDS: FEDERAL GGG-H-20A, ASME B107.56 Blunt point and round face hammer for smoothing out dents in metal sheets and deep areas. 490 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M STRIKING TOOLS HAMMERS DEAD BLOW HAMMERS RUBBER MALLETS AND PLASTIC FACE HAMMERS BALL PEIN HAMMERS HOLE PUNCH HOLE PUNCH SETS SETS CHISELS, PUNCHES & DRIFT PINS ALIGNMENT BARS HOLLOW PUNCH SETS Hollow punch sets are used to cut out round sections on different materials. Their applications are very diverse. For example, they can be used to make seals for automobile crankcases, for hydraulic or toilet installations, etc. The materials it can cut are polyurethane foam, rubber, cardboard, leather, and joint materials. 49902 27-PIECE SET 1/8” TO 2” IN PLASTIC CASE DESCRIPTION ACCESSORIES in. Handle 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, adapter Plastic case 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4, 1 5/16, 1 3/8 1 7/16, 1 1/2, 1 5/8, 1 11/16, 1 3/4, 1 7/8, 2 It is used to cut out round shapes and rings to make foam, cardboard, leather, rubber, fiber, plastic and lead seals, among other possible materials. TOTAL gm lb. 2748 6.06 They are manufactured with high-carbon steel, with a 53 to 66 °RC hardness. Handles made of impact-resistant steel alloy. Polypropylene case. This system was made so 2 or more hollow punches can be used at the same time. 10 49902 STRIKING TOOLS 49900 49900 49901 16-PIECE SET 1/8” TO 1 3/16” IN PLASTIC CASE DESCRIPTION in. 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 1 , 1 1/16, 1 1/8, 1 3/16 TOTAL gm lb. 1120 2.47 11-PIECE SET 1/8” TO 3/4” IN PLASTIC CASE DESCRIPTION ACCESSORIES Handle Plastic case 49901 49900M in. 1/8, 3/16, 1/4, 5/16, 3/8 7/16, 1/2, 9/16, 5/8, 3/4 SUPERIOR QUALITY AFFORDABLE TOOLS TOTAL gm lb. 598 1.32 16-PIECE SET 3 TO 30 MM IN PLASTIC CASE DESCRIPTION ACCESSORIES Handle Plastic case 49900M mm 3 mm, 4 mm, 6 mm, 8 mm, 10 mm, 12 mm, 14 mm, 16 mm, 18 mm, 20 mm, 22 mm, 24 mm, 26 mm, 28 mm, 30 mm. ACCESSORIES Handle Plastic case TOTAL gm lb. 1120 2.47 491 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M STRIKING TOOLS DEAD BLOW HAMMERS HAMMERS SHEET METAL HOLE PUNCH SETS 50900 RUBBER MALLETS AND PLASTIC FACE HAMMERS in. 5/8 3/4 1 1 1/4 mm 16 19 25.4 32 OPENING MATRIX HOLE PUNCH HOLE PUNCH SETS SETS ALIGNMENT CHISELS, PUNCHES CHISELS, & DRIFT PINS PUNCHES BARS & DRIFT PINS BRONZE DRIFT PUNCHES Drift punches are used to install or remove pins and rivets. Their length depends on the job at hand. Straight punches can also be used to align holes when assembling parts. 7-PIECE SET FOR SHEET METAL, 5/8” TO 1 1/14” IN PLASTIC CASE STRIKING PUNCH Ø BALL PEIN HAMMERS SCREWS Ø L THREAD in. in. mm in. 9/16 5/16 8 1 19/32 25/64 10 1 1/2 51/64 15/32 12 1 3/4 1 1/32 OPENING End designed to withstand strikes. Does not strip or deform. WEIGHT mm in. mm gm lb. 25.4 1/2 13 8001.76 38.1 39/59 17 44.4 14/19 19 Saves time in perforation, serration, filing and manual adjustments. Make burr-free, clean holes to install conduit pipes, controls, instruments and for sheet metal boxes. Easy to use tools. Can be operated with a common wrench. Assortment of hole punches for different hole sizes. Knurled grasping area for a better grip. Designed to prevent any damage of the stricken object. 49903 3-PIECE SET BRONZE DRIFT PINS DESCRIPTION ACCESSORIES 3/8”, 1/2”, 3/4” TOTAL gm lb. 793 1.75 POUCH 49903 BRONZE DRIFT PUNCHES CODE 49920 49922 TIP DIAMETER B SHAFT DIAMETER B in. 1/2 3/4 in. 1/2 3/4 mm 12.7 19.0 mm 12.7 19.0 LENGTH L in. 7 8 mm 17 20 TOTAL gm. lb. 190 0.42 485 1.07 50900 For medium steel and aluminum sheet metal, 10 gauge (3.5 mm) 49920 492 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M STRIKING TOOLS DEAD BLOW HAMMERS HAMMERS RUBBER MALLETS AND PLASTIC FACE HAMMERS BALL PEIN HAMMERS HOLE PUNCH SETS CHISELS, PUNCHES CHISELS, & DRIFTPUNCHES PINS & DRIFT PINS ALIGNMENT BARS COMBINATION SETS OF CHISELS, PUNCHES AND DRIFT PINS Combination sets make an expert's work easier. Manufactured with tempered, micro-alloy steel. Hexagonal body design. NO.46 NO.46 NO.6 26-PIECE SET DRIFT PINS, PUNCHES, AND CHISELS SIZE DRIFT PINS AND PUNCHES CODE mm 9.5 x 3.2 12.7 x 4.8 7.9 x 2.8 47-1/4X3/32 47-5/16X1/8 47-5/16X5/32 47-3/8X3/16 47-7/16X7/32 47-1/2X1/4 1/4 x 3/32 5/16 x 1/8 5/16 x 5/32 3/8 x 3/16 7/16 x 7/32 1/2 x 1/4 6.4 x 2.4 7.9 x 3.2 7.9 x 4.0 9.5 x 4.8 11.1 x 5.6 12.7 x 6.4 50-1/4 50-5/16 50-3/8 50-7/16 50-1/2 1/4 x 3/32 5/16 x 1/8 3/8 x 3/16 7/16 x 7/32 1/2 x 1/4 6.4 x 2.4 7.9 x 3.2 9.5 x 4.8 11.1 x 5.6 12.7 x 6.4 86A-3/16 86A-1/4 86A-5/16 86A-7/16 86A-1/2 86A-5/8 86A-3/4X8 86A-7/8X8 86A-1X8 1/4 x 3/16 1/4 x 1/4 5/16 x 5/16 7/16 x 7/16 1/2 x 1/2 5/8 x 5/8 3/4 x 3/4 7/8 x 1 1 x 1 3/16 6.4 x 4.8 6.4 x 6.4 7.9 x 7.9 11.1 x 11.1 12.7 x 12.7 15.9 x 15.9 19.1 x 19.1 22.2 x 25.4 25.4 x 30.2 96-5/16 96-3/8 96-1/2 5/16 x 1/8 3/8 x 3/16 1/2 x 1/4 7.9 x 3.2 9.5 x 4.8 12.7 x 6.4 NO.5 DRIFT PINS, PUNCHES AND CHISELS SIZE CODE 47-1/4X3/32 47-5/16X1/8 47-5/16X5/32 47-3/8X3/16 47-1/2X1/4 in. 1/4 x 3/32 5/16 x 1/8 5/16 x 5/32 3/8 x 3/16 1/2 x 1/4 mm 6.4 x 2.4 7.9 x 3.2 7.9 x 4.0 9.5 x 4.8 12.7 x 6.4 50-1/4 50-1/4 50-5/16 50-3/8 50-7/16 50-1/2 1/4 x 1/16 1/4 x 3/32 5/16 x 1/8 3/8 x 3/16 7/16 x 7/32 1/2 x 1/4 6.4 x 1.6 6.4 x 2.4 7.9 x 3.2 9.5 x 4.8 11.1 x 5.6 12.7 x 6.4 96-3/8 96-1/2 3/8 x 3/16 1/2 x 1/4 9.5 x 4.8 12.7 x 6.4 41-3/8 41-1/2 44-3/8 3/8 x 1/8 1/2 x 3/16 3/8 x 5/32 86A-3/16 86A-5/16 86A-7/16 86A-1/2 9.5 x 3.2 12.7 x 4.8 9.5 x 4.0 E519 E514 12-PIECE SET SIZE 47-1/4X3/32 47-5/16X1/8 47-5/16X5/32 47-3/8X3/16 in. 1/4 x 3/32 5/16 x 1/8 5/16 x 5/32 3/8 x 3/16 mm 6.4 x 2.4 7.9 x 3.2 7.9 x 4.0 9.5 x 4.8 50-5/16 50-3/8 5/16 x 1/8 3/8 x 3/16 7.9 x 3.2 9.5 x 4.8 96-3/4 3/4 x 3/8 19.1 x 9.5 41-3/8 3/8 x 1/8 9.5 x 3.2 1/4 x 3/16 5/16 x 5/16 7/16 x 7/16 1/2 x 1/2 6.4 x 4.8 7.9 x 7.9 11.1 x 11.1 12.7 x 12.7 Pouch Pouch Pouch SUPERIOR QUALITY AFFORDABLE TOOLS 493 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 10 TOOLS 41-3/8 41-1/2 44-5/16 in. 3/8 x 1/8 1/2 x 3/16 5/16 x 7/64 E516 16-PIECE SET STRIKING CODE NO.6 NO.5 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M STRIKING TOOLS DEAD BLOW HAMMERS HAMMERS RUBBER MALLETS AND PLASTIC FACE HAMMERS BALL PEIN HAMMERS HOLE PUNCH SETS CHISELS, PUNCHES CHISELS, & DRIFTPUNCHES PINS & DRIFT PINS ALIGNMENT BARS COMBINATION SETS OF CHISELS, PUNCHES, DRIFT AND PINS NO.2 NO.2 10-PIECE SET CHISELS, DRIFT PINS AND PUNCHES CODE SIZE in. NO.4 CODE 3/8 x 1/8 9.5 x 3.2 47-1/4X3/32 1/4 x 3/32 6.4 x 2.4 47-5/16X1/8 5/16 x 1/8 7.9 x 3.2 47-3/8X3/16 3/8 x 3/16 9.5 x 4.8 50-3/16 1/4 x 1/16 6.4 x 1.6 50-5/16 5/16 x 1/8 7.9 x 3.2 50-3/8 3/8 x 3/16 9.5 x 4.8 86A-1/4 1/4 x 1/4 6.4 x 6.4 86A-3/8 3/8 x 3/8 9.5 x 9.5 86A-7/16 7/16 x 7/16 11.1 x 11.1 5-PIECE SET CHISELS, DRIFT PINS AND PUNCHES 47-5/16X5/32 SIZE in. mm 5/16 x 5/32 7.9 x 4.2 50-3/8 3/8 x 3/16 9.5 x 4.8 41-3/8 3/8 x 1/8 9.5 x 3.2 7/16 x 7/16 1/2 x 1/2 11.1 x 11.1 12.7 x 12.7 mm 41-3/8 E307 NO.3 NO.4 86A-7/16 86A-1/2 E518 Pouch NO.3 5-PIECE SET CHISELS, DRIFT PINS AND PUNCHES CODE SIZE 41-3/8 in. 3/8 x 1/8 mm 9.5 x 3.2 47-5/16X1/8 47-3/8X3/16 5/16 x 1/8 3/8 x 3/16 7.9 x 3.2 9.5 x 4.8 50-5/16 5/16 x 1/8 7.9 x 3.2 86A-1/2 1/2 x 1/2 12.7 x 12.7 E300 Pouch Pouch 494 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M STRIKING TOOLS DEAD BLOW HAMMERS HAMMERS RUBBER MALLETS AND PLASTIC FACE HAMMERS BALL PEIN HAMMERS HOLE PUNCH SETS CHISELS, PUNCHES CHISELS, & DRIFTPUNCHES PINS & DRIFT PINS ALIGNMENT BARS PUNCHES AND DRIFT PINS Drift pins are used to install or remove guide bushings, pins, and center guides. Their length is important and it depends on the job. Straight pins can also be used to align holes when assembling parts. Straight tip, ideal for installing or removing guide bushings when die-cutting. Made with micro-alloy steel for greater resistance. 96A The tool's butt end is designed to withstand strikes. 96A 7-PIECE SET LONG DRIFT PUNCHES CODE 96-1/4 96-5/16 96-3/8 96-7/16 96-1/2 96-5/8 96-3/4 Tapered tip, ideal for installing or removing pins and center guides in deep holes. in. SIZE 1/4 x 3/32 5/16 x 1/8 3/8 x 3/16 7/16 x 7/32 1/2 x 1/4 5/8 x 5/16 3/4 x 3/8 E303 mm 6.4 x 2.4 7.9 x 3.2 9.5 x 4.8 11.1 x 5.6 12.7 x 6.4 15.9 x 7.9 19.1 x 9.5 10 Pouch STRIKING TOOLS 47A 7-PIECE SET STRAIGHT PIN PUNCHES CODE 47-1/4X1/16 47-1/4X3/32 47-5/16X1/8 47-5/16X5/32 47-3/8X3/16 47-7/16X7/32 47-1/2X1/4 E307 48A 50A 47A 50A 6-PIECE SET SHORT DRIFT PUNCHES SIZE in. mm 1/4 x 1/16 6.4 x 1.6 1/4 x 3/32 6.4 x 2.4 5/16 x 1/8 7.9 x 3.2 5/16 x 5/32 7.9 x 4.0 3/8 x 3/16 9.5 x 4.8 7/16 x 7/32 11.1 x 5.6 1/2 x 1/4 12.7 x 6.4 CODE 50-3/16 50-1/4 50-5/16 50-3/8 50-7/16 50-1/2 E515 in. 1/4 x 1/16 1/4 x 3/32 5/16 x 1/8 3/8 x 3/16 7/16 x 7/32 1/2 x 1/4 Pouch SIZE 48A 5-PIECE SET EXTRA LONG PIN PUNCHES mm 6.4 x 1.6 6.4 x 2.4 7.9 x 3.2 9.5 x 4.8 11.1 x 5.6 12.7 x 6.4 CODE 48-3/8X5/32 48-3/8X3/16 48-7/16X7/32 48-1/2X1/4 48-1/2X5/16 E517 SIZE in. 3/8 x 5/32 3/8 x 3/16 7/16 x 7/32 1/2 x 1/4 1/2 x 5/16 mm 9.5 x 4.0 9.5 x 4.8 11.1 x 5.6 12.7 x 6.4 12.7 x 7.9 Pouch Pouch SUPERIOR QUALITY AFFORDABLE TOOLS 495 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M STRIKING TOOLS 99B RUBBER MALLETS AND PLASTIC FACE HAMMERS DEAD BLOW HAMMERS HAMMERS BALL PEIN HAMMERS HOLE PUNCH SETS CHISELS, PUNCHES CHISELS, & DRIFTPUNCHES PINS & DRIFT PINS ALIGNMENT BARS 5-PIECE SET LONG DRIFT PUNCHES CODE SIZE in. mm 5/16 x 1/8 7.9 x 3.2 3/8 x 3/16 9.5 x 4.8 7/16 x 7/32 11.1 x 5.6 1/2 x 1/4 12.7 x 6.4 5/8 x 5/16 15.9 x 7.9 96-5/16 96-3/8 96-7/16 96-1/2 96-5/8 Pouch E517 99B 47-1/2 x 1/4 STRAIGHT PIN PUNCHES FACT SHEET STRAIGHT PIN PUNCHES CODE 47-1/4X1/16 47-1/4X3/32 47-5/16X1/8 47-5/16X5/32 47-3/8X3/16 47-7/16X7/32 47-1/2X1/4 in. mm 1/4 6.4 1/4 6.4 5/16 8.0 5/16 8.0 3/8 9.5 7/16 11.1 1/2 12.7 LENGTH L B A in. 1/16 3/32 1/8 5/32 3/16 7/32 1/4 ANSI 209.2 mm 1.6 2.9 3.2 4.0 4.8 5.6 6.4 in. 4 3/8 4 3/4 5 1/4 5 5/8 6 1/8 6 1/2 6 3/4 mm 111.1 120.7 133.4 142.9 155.6 165.1 171.5 CODE TOTAL gm 24 28 40 45 68 49 127 lb. 0.05 0.06 0.09 0.10 0.15 0.11 0.28 STANDARDS: FEDERAL GGG-P-831F ASME B107.48M 47-1/4X1/16 47-1/4X 3/32 47-5/16X1/8 47-5/16X5/32 47-3/8X 3/16 47-7/16X7/32 47-1/2X 1/4 CUT AREA HARDNESS ORC STRIKING AREA HARDNESS ORC 53-60 53-60 53-60 53-60 53-60 53-60 53-60 45 max. 45 max. 45 max. 45 max. 45 max. 45 max. 45 max. IMPACT HEIGHT/INCH 5 7 10 10 20 30 25 IMPACT WEIGHT/LB 1 1 2 1/2” 5 5 5 10 To install or remove guide bushings when die-cutting. To install or remove pins and center guides, and in the alignment of pins that center two or more pieces. The tool's butt end is designed to withstand strikes. 48-3/8 x 3/16 8” EXTRA LONG STRAIGHT PIN PUNCHES CODE 48-3/8X5/32 48-3/8X3/16 48-7/16X7/32 48-1/2X1/4 48-1/2X5/16 A in. mm 3/8 9.5 3/8 9.5 7/16 11.1 1/2 12.7 1/2 12.7 LENGTH L B in. 5/32 3/16 7/32 1/4 5/16 mm 4.0 4.8 5.6 6.3 7.9 in. 8 8 8 8 8 mm 203 203 203 203 203 TOTAL gm 388 357 617 826 830 lb. 0.85 0.78 1.36 1.82 1.83 STANDARDS: FEDERAL GGG-P-831F ASME B107.48M 496 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M STRIKING TOOLS DEAD BLOW HAMMERS HAMMERS RUBBER MALLETS AND PLASTIC FACE HAMMERS BALL PEIN HAMMERS HOLE PUNCH SETS CHISELS, PUNCHES CHISELS, & DRIFTPUNCHES PINS & DRIFT PINS ALIGNMENT BARS PUNCHES AND DRIFT PINS 10 96-1/2 A 50-3/16 50-1/4 50-5/16 50-3/8 50-7/16 50-1/2 in. 1/4 1/4 5/16 3/8 7/16 1/2 LENGTH L B mm 6.4 6.4 8.0 9.5 11.1 12.7 in. 1/16 3/32 1/8 3/16 7/32 1/4 LONG TAPERED DRIFT PUNCHES mm 1.6 2.4 3.2 4.8 5.6 6.4 in. 4 1/8 4 5/8 5 1/8 5 5/8 6 6 1/2 mm 104.7 117.4 130.1 142.8 152.4 165.1 B A CODE LENGTH L TOTAL gm 21 24 42 75 112 153 lb. 0.05 0.05 0.09 0.17 0.25 0.34 STANDARDS: FEDERAL GGG-P-831F ASME B107.48M 96-1/4 96-5/16 96-3/8 96-7/16 96-1/2 96-5/8 96-3/4 in. 1/4 5/16 3/8 7/16 1/2 5/8 3/8 mm 6.3 7.9 9.5 11.1 12.7 15.8 9.5 in. 3/32 1/8 3/16 7/32 1/4 5/16 3/4 mm 2.2 3.2 4.8 5.6 6.4 7.9 19.0 in. 10 10 10 10 10 10 10 TOTAL mm 254.0 254.0 254.0 254.0 254.0 254.0 254.0 gm 52 80 117 172 224 354 503 TOOLS SHORT TAPERED DRIFT PUNCHES CODE STRIKING 50-5/16 lb. 0.11 0.18 0.26 0.38 0.49 0.78 1.11 STANDARDS: FEDERAL GGG-P-831F ASME B107.48M SHORT TAPERED DRIFT PUNCHES FACT SHEET LONG TAPERED DRIFT PUNCHES FACT SHEET ASME B107.48M CODE 50-3/16 50-1/4 50-5/16 50-3/8 50-7/16 50-1/2 ASME B107.48M CUT AREA HARDNESS ORC STRIKING AREA HARDNESS ORC IMPACT HEIGHT/INCH 53-60 53-60 53-60 53-60 53-60 53-60 45 max. 45 max. 45 max. 45 max. 45 max. 45 max. 20 20 20 20 SE SE IMPACT WEIGHT/LB 5 5 10 10 SE SE CODE 96-1/4 96-5/16 96-3/8 96-7/16 96-1/2 96-5/8 96-3/4 CUT AREA HARDNESS ORC STRIKING AREA HARDNESS ORC IMPACT HEIGHT/INCH IMPACT WEIGHT/LB 53-60 53-60 53-60 53-60 53-60 53-60 53-60 45 max. 45 max. 45 max. 45 max. 45 max. 45 max. 45 max. 20 20 20 SE SE SE SE 5 10 10 SE SE SE SE To install or remove guide bushings when die-cutting. To install or remove pins and center guides in deep holes, and in the alignment of pins that center two or more pieces. The tool's butt end is designed to with stand strikes. SUPERIOR QUALITY AFFORDABLE TOOLS 497 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M STRIKING TOOLS DEAD BLOW HAMMERS HAMMERS RUBBER MALLETS AND PLASTIC FACE HAMMERS BALL PEIN HAMMERS HOLE PUNCH SETS CHISELS, PUNCHES CHISELS, & DRIFTPUNCHES PINS & DRIFT PINS ALIGNMENT BARS CENTER AND PRICK PUNCHES 50° center punches are used to mark pieces in manufacturing or assembly. 90° prick punches are used to center the bore point and prevent tips from slipping off. 900 FOR CENTERING OR MARKING 500 FOR PRICKING OR DRILLING The tool's butt end is designed to withstand strikes. 41 - 1/2 90˚ CENTER PUNCHES 900 CODE 41-1/4 41-5/16 41-3/8 41-7/16 41-1/2 41-5/8 41A 41A PRICK AND DRILL PUNCHES 41-1/4 41-5/16 41-3/8 41-1/2 41-5/8 E518 in. 1/4 x 5/64 5/16 x 3/32 3/8 x 1/8 1/2 x 3/16 5/8 x 5/16 Pouch A in. 1/4 5/16 3/8 7/16 1/2 5/16 LENGTH L B mm 6.4 7.9 9.5 11.1 12.7 7.9 in. 5/64 3/32 1/8 5/32 3/16 5/8 mm 2.0 2.4 3.2 4.0 4.8 15.8 in. 4 1/4 4 5/8 4 7/8 5 1/4 5 5/8 6 1/4 SIZE CODE mm 6.4 x 2.0 7.9 x 2.4 9.5 x 3.2 12.7 x 4.8 15.9 x 7.9 41-1/4 41-5/16 41-3/8 41-7/16 41-1/2 41-5/8 50˚ PRICK PUNCHES 500 CODE B A LENGTH L TOTAL mm 107.9 117.4 123.8 133.3 142.8 158.7 gm 24 39 62 87 163 222 lb. 0.05 0.09 0.14 0.19 0.36 0.49 44-1/4 44-5/16 44-3/8 44-7/16 44-1/2 44-5/8 STANDARDS: FEDERAL GGG-P-831F, ASME B107.48M 5-PIECE SET CODE 44 - 3/8 in. 1/4 5/16 3/8 7/16" 1/2" 5/8" mm 6.4 7.9 9.5 11.1 12.7 15.8 in. 3/32 7/64 3/8 7/32" 1/4" 3/8" mm 2.3 2.7 9.5 5.5 6.4 9.5 in. 4 3/4 5 5 1/4 5 5/8" 6" 6 7/8" mm 120.6 127.0 133.3 142.8 152.4 174.6 PRICK PUNCHES FACT SHEET ANSI 209.1 ANSI 209.1 48-60 48-60 48-60 48-60 48-60 48-60 95 max. 95 max. 95 max. 95 max. 95 max. 95 max. IMPACT IMPACT HEIGHT/IN. WEIGHT/LB 15 15 15 15 15 15 5 5 5 5 5 5 For tracing on metal plates or sheet metal; to mark or punch guide holes; to place self-threading screws. gm 25 45 70 95 196 400 lb. 0.06 0.10 0.15 0.20 0.43 0.88 STANDARDS: FEDERAL GGG-P-831F, ASME B107.48M CENTER PUNCHES FACT SHEET CUT AREA STRIKING AREA HARDNESS ORC HARDNESS ORC TOTAL CODE 44-1/4 44-5/16 44-3/8 44-7/16 44-1/2 44-5/8 CUT AREA STRIKING AREA HARDNESS ORC HARDNESS ORC 48-60 48-60 48-60 48-60 48-60 48-60 95 max. 95 max. 95 max. 95 max. 95 max. 95 max. IMPACT IMPACT HEIGHT/IN. WEIGHT/LB 15 15 15 15 15 15 5 5 5 5 5 5 Useful for initiating holes. The tool's butt end is designed to withstand strikes. 498 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M STRIKING TOOLS DEAD BLOW HAMMERS HAMMERS RUBBER MALLETS AND PLASTIC FACE HAMMERS BALL PEIN HAMMERS HOLE PUNCH SETS CHISELS, PUNCHES CHISELS, & DRIFTPUNCHES PINS & DRIFT PINS ALIGNMENT BARS CHISELS Designed to remove, cut or break materials with a hardness softer than the chisel's, such as concrete, rock, slag, brass, untreated steel, nuts, bolts, pins, etc. It is widely used in the construction industry, as well as in the installation and maintenance of fixed equipment and piping in the chemical and food industries. The tip's width dictates the chisel's uses, depending on the accuracy or brute force required. Made with micro-alloy steel for greater resistance. 86D The tool's butt end is designed to withstand strikes. Tip wider than body 86D 10-PIECE SET CHISEL SET CODE 86A-3/16 86A-1/4 86A-5/16 86A-3/8 86A-7/16 86A-1/2 86A-5/8 86A-3/4X8 86A-7/8X8 86A-1X8 Designed to remove cold materials like iron, brass, bronze and steel. SIZE in. mm 6.4 x 4.8 6.4 x 6.4 7.9 x 7.9 9.5 x 9.5 11.1 x 11.1 12.7 x 12.7 15.9 x 15.9 19.1 x 19.1 22.2 x 25.4 25.4 x 30.2 10 STRIKING E513 1/4 x 3/16 1/4 x 1/4 5/16 x 5/16 3/8 x 3/8 7/16 x 7/16 1/2 x 1/2 5/8 x 5/8 3/4 x 3/4 7/8 x 1 1 x 1 3/16 Pouch TOOLS 86B 86B 7-PIECE SET 86C 5-PIECE SET CHISEL SET CODE 86A-1/4 86A-5/16 86A-3/8 86A-7/16 86A-1/2 86A-5/8 86A-3/4X8 E303 in. 86A 86C 86A 5-PIECE SET CHISEL SET CHISEL SET SIZE 1/4 x 1/4 5/16 x 5/16 3/8 x 3/8 7/16 x 7/16 1/2 x 1/2 5/8 x 5/8 3/4 x 3/4 mm 6.4 x 6.4 7.9 x 7.9 9.5 x 9.5 11.1 x 11.1 12.7 x 12.7 15.9 x 15.9 19.1 x 19.1 CODE 86A-1/4 86A-5/16 86A-3/8 86A-7/16 86A-1/2 E520 in. 1/4 x 1/4 5/16 x 5/16 3/8 x 3/8 7/16 x 7/16 1/2 x 1/2 Pouch SIZE CODE mm 6.4 x 6.4 7.9 x 7.9 9.5 x 9.5 11.1 x 11.1 12.7 x 12.7 86A-5/16 86A-7/16 86A-1/2 86A-5/8 86A-3/4X8 E520 SIZE in. mm 5/16 x 5/16 7.9 x 7.9 7/16 x 7/16 11.1 x 11.1 1/2 x 1/2 12.7 x 12.7 5/8 x 5/8 15.9 x 15.9 3/4 x 3/4" 19.1 x 19.1 Pouch Pouch SUPERIOR QUALITY AFFORDABLE TOOLS 499 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M STRIKING TOOLS DEAD BLOW HAMMERS HAMMERS RUBBER MALLETS AND PLASTIC FACE HAMMERS BALL PEIN HAMMERS HOLE PUNCH SETS ALIGNMENT BARS CHISELS, PUNCHES CHISELS, & DRIFTPUNCHES PINS & DRIFT PINS CHISELS 86A-1/2 76-3/8 DIAMOND TIP CHISELS COLD CUT CHISELS CODE TIP SIZE A in. 86A-3/16 1/4 5/16 86A-1/4 86A-5/16 3/8 7/16 86A-3/8 86A-7/16 1/2 5/8 86A-1/2 3/4 86A-5/8 86A-3/4X8 7/8 86A-3/4X12 7/8 86A-7/8X8 1 86A-7/8X12 1 86A-1X8 1 3/16 1 86A-1X12 BODY SIZE B mm 6.4 7.9 9.5 11.1 12.7 15.9 19.0 22.2 22.2 25.4 25.4 30.2 25.4 in. 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 3/4 7/8 7/8 1 1 LENGTH L mm 4,8 6.4 7.9 9.5 11.1 12.7 15.9 19.0 19.0 20.6 20.6 25.4 25.4 in. 4 7/8 5 1/8 5 3/8 5 1/2 6 6 5/8 7 8 12 8 12 8 1/4 12 CODE TOTAL mm gm 123.8 17 130.2 32 136.5 51 139.7 78 152.4 114 168.3 165 177.8 270 203.2 469 304.8 695 203.2 500 304.8 773 209.5 670 304.8 1085 lb. 0.04 0.07 0.11 0.17 0.25 0.36 0.60 1.03 1.53 1.10 1.70 1.48 2.39 STANDARDS: FEDERAL GGG-P-831F, ASME B107.48M COLD CUT CHISELS FACT SHEET ASME B107.47M CODE 86A-3/16 86A-1/4 86A-5/16 86A-3/8 86A-7/16 86A-1/2 86A-5/8 86A-3/4X8 86A-3/4X12 86A-7/8X8 86A-7/8X12 86A-1X8 86A-1X12 CUT AREA IMPACT STRIKING AREA HARDNESS ORC HARDNESS ORC HEIGHT/INCH 45-60 45-60 45-60 45-60 45-60 45-60 45-60 45-60 45-60 45-60 45-60 45-60 45-60 45 max. 45 max. 45 max. 45 max. 45 max. 45 max. 45 max. 45 max. 45 max. 45 max. 45 max. 45 max. 45 max. 72-3/8 6 6 6 20 20 20 30 30 30 30 30 30 30 76-1/4 76-5/16 76-3/8 76-1/2 76-5/8 TIP SIZE A in. mm 5/32 4.0 3/16 4.8 1/4 6.4 5/16 7.9 5/8 15.9 BODY SIZE B in. 1/4 5/16 3/8 1/2 3/8 CAPE CHISELS LENGTH L mm 6.4 7.9 9.5 12.7 9.5 in. 4 1/2 5 5 5/8 6 6 1/2 CODE TIP SIZE A TOTAL mm 114.3 127.0 142.9 152.4 165.1 gm 34 59 96 183 309 lb. 0.07 0.13 0.21 0.40 0.68 STANDARDS: FEDERAL GGG-P-831C, ASME B107.48M in. mm 72-1/4 11/64 4.4 72-5/16 13/64 5.2 72-3/8 1/4 6.4 BODY SIZE B in. 1/4 5/16 3/8 mm 6.4 7.9 9.5 LENGTH L in. mm 4 5/8 117.5 5 1/8 130.2 5 1/2 139.7 TOTAL gm 28 46 68 lb. 0.06 0.10 0.15 STANDARD: FEDERAL GGG-C-313C Designed for cutting plumbing and make slits on metals. DIAMOND TIP CHISEL FACT SHEET ASME B107.47M CODE CUT AREA HARDNESS ORC STRIKING AREA HARDNESS ORC IMPACT HEIGHT/INCH 76A-1/4 76A-5/16 76A-3/8 76A-1/2 76A-5/8 53-60 53-60 53-60 53-60 53-60 45 max. 45 max. 45 max. 45 max. 45 max. 6 6 6 20 20 Designed to make V-shaped cuts and to clean interior corners. For removing, cutting or breaking materials with a hardness lower than the chisel's. Designed to remove cold materials like iron, brass, bronze and steel. The tool's butt end is designed to withstand strikes. 500 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M STRIKING TOOLS RUBBER MALLETS AND PLASTIC FACE HAMMERS DEAD BLOW HAMMERS HAMMERS BALL PEIN HAMMERS HOLE PUNCH SETS CHISELS, PUNCHES CHISELS, & DRIFTPUNCHES PINS & DRIFT PINS ALIGNMENT BARS PUNCH AND CHISEL HOLDERS Reduces the risk of hand injury. Ideal for holding punches and chisels up to 1 inch in diameter. Up to 1" holding capacity. Up to 1" holding capacity. 2108A 10 STRIKING Chromevanadium steel shaft. TOOLS High-resistance ergonomic plastic handle. Blued coating. 2108 2108A 2108 SQUARE PUNCH AND CHISEL HOLDER CODE 2108A SHAFT DIAMETER in. 3/8 mm 9.5 TOTAL LENGTH in. mm 8 1/2 215.9 PUNCH AND CHISEL HOLDER CODE gm lb. 275 0.605 2108 SHAFT DIAMETER in. 3/8 mm 9.5 TOTAL LENGTH in. mm 8 1/2 215.9 SUPERIOR QUALITY AFFORDABLE TOOLS gm lb. 275 0.605 501 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M STRIKING TOOLS HAMMERS DEAD BLOW HAMMERS RUBBER MALLETS AND PLASTIC FACE HAMMERS BALL PEIN HAMMERS HOLE PUNCH SETS CHISELS, PUNCHES CHISELS, & DRIFTPUNCHES PINS & DRIFT PINS ALIGNMENT BARS SPRING-LOADED PUNCH SET Apply up to 3,500 PSI force. The user can easily control the amount of force applied by adjusting the spring's tension. This highly accurate tool offers great control. Ideal for work in tight areas or on jobs requiring great precision. 42AZ09 37-PIECE SET SPRING-LOADED LETTER AND NUMBER PUNCH SET DESCRIPTION 26 Letters, A to Z 10 numbers, 0 to 9 Spring-loaded punch Plastic case TOTAL gm lb. 480 1.06 42AZ09 INDISPUTABLE QUALITY The quality of URREA tools exceeds LEADERSHIP international manufacturing standards (ISO, ANSI, ASME, SAE, GSA, DIN, DGN, EMA, ANCE, VDE). When buying a URREA tool you are purchasing from the best tools in the world. www.urreaprofessionaltools.com (800) 366-6911 502 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M STRIKING TOOLS RUBBER MALLETS AND PLASTIC FACE HAMMERS DEAD BLOW HAMMERS HAMMERS BALL PEIN HAMMERS HOLE PUNCH SETS ALIGNMENT ALIGNMENT BARS BARS CHISELS, PUNCHES & DRIFT PINS ALIGNMENT BARS There is a great variety of alignment bars for different purposes. They can be used to align, adjust, move or disassemble metal or wood pieces. Useful for prying 2116 2120 2126 21003 3-PIECE SET ALIGNMENT BARS CODE DISTANCE BETWEEN HEXAGON PLANES B LENGTH L 10 B L 2116 2120 2126 mm 12.7 15.9 12.7 in. mm 12 13/16 325.4 16 406.4 16 406.4 TOOLS HEAD ALIGNMENT PRY BARS WITH TURNING HEAD CODE DISTANCE BETWEEN HEXAGON PLANES B LENGTH L TOTAL B L 2126 2130 in. 1/2 5/8 mm 12.7 15.9 STRIKING in. 1/2 5/8 1/2 in. mm gm lb. 16 1/2 419.1 419 0.92 18 457.2 702 1.55 2130 Great tool for creating leverage, for aligning or for positioning mechanical parts or pipe flanges. ALIGNMENT BARS The angled chisel tip allows greater leverage when used to remove wooden seals or machinery elements. CODE DISTANCE BETWEEN HEXAGON PLANES B LENGTH L TOTAL B 2125 The flat tip is used mainly for aligning. SUPERIOR QUALITY AFFORDABLE TOOLS L 2116 2120 2124 2125 in. 1/2 5/8 3/4 7/8 mm 12.7 15.9 19.0 22.2 in. 12 13/16 16 23 3/4 30 mm 325.4 406.4 603.2 762.0 gm 324 550 1013 2267 lb. 0.71 1.21 2.23 5.00 503 Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329