Chapter 9: Dimming actuators/control units
9.1 Dimming actuator, 1-gang
Dimming actuator built-in/230/500 W
Art. no. 659519
Dimming actuator built-in/230/500 WChapter 9:Dimming actuators/control unitsArt. no.659519As at 09/029.1Dimming actuator, 1-gang
Dimming actuator built-in/230/500 W
a
a
a
a
TC =70˚C
TA =45˚C
a
AC 230V
EIB
Merten
DIMMAKTOR
EB/230/500 W
6595 19
Colour
Article no.
polar
white
659519
The INSTABUS dimming actuator built-in/230/500 W
dims incandescent lamps and LV halogen lamps (only
via electronic transformers) with a maximum capacity
of approx. 500 watts. Wound transformers may not be
connected to the dimming actuator.
a
a
Montagehinweis
a>4 cm
N E2 E1
B
L
T
Nebenstelle
AC 230V
instabus
®
Busanschluß
1. Function
Table of Contents
2. Installation
1.
Function
1
2.
Installation
1
3.
Technical Data
2
4.
Settings in the EIB Tool Software (ETS)
2
5.
Application overview
2
As at 09/02
The INSTABUS dimming actuator built-in/230/500 W is
a built-in device for surface mounting and built-in installation. The bus coupler is already integrated in the
device. The dimming actuator is linked to the bus via
a bus connecting terminal (art. no. 689701).
When installing the device, it should be ensured that a
minimum distance of 4 cm is maintained all round.
The device has 6 screwless plug-in terminals:
3 terminals for neutral conductor
2 terminals for outer conductor
1 terminal for dimmed outer conductor
1
Chapter 9: Dimming actuators/control units
9.1 Dimming actuator, 1-gang
Dimming actuator built-in/230/500 W
Art. no. 659519
Connection example
3. Technical Data
Bus
+ -
Power supply from the
bus:
Power supply from the
mains:
Leakage loss:
A
AC 230 V / 50 Hz
approx.4 watts at nominal
power
AC 4 kV bus/mains voltage
AC 230 V (N required)
Insulation voltage:
Nominal voltage:
Nominal power
Incandescent lamps: max. 500 W
HV halogen lamps: max. 500 W
LV halogen lamps:
MET or other electronic
transformers, max. 500 W
Wound transformers may not be connected
Extension input
Number of channels: 2
0 signal:
0-50 V AC
1 signal:
161-253 V AC
Cable length:
max. 500 m
Protection
Short circuit:
electronic
Overload:
via temperature switch
Ambient temperature
Operation:
-5 °C to +45 °C
Storage:
-25 °C to +55 °C
Transport:
-25 °C to +70 °C
Max. humidity:
93 %
Operating elements:
Programming button
Display elements:
Red LED for checking the
bus voltage and for entering
the phys. address
Connections
Bus:
via two 1 mm pins for bus
connecting terminal
Neutral conductor:
one 1-pole plug-in terminal
for max. 2.5 mm2
Outer conductor:
two 1-pole plug-in terminals
for max. 2.5 mm2
Extension units:
two 1-pole plug-in terminals
for max. 2.5 mm2
Dimmed outer con- one 1-pole plug-in terminal
ductor:
for max. 2.5 mm2
Type of protection:
IP 20
EC guidelines:
corresponds to low voltage
guideline 73/23/EEC; corresponds to EMC guideline
89/336/EEC
Dimensions:
approx. 279x40x35 mm
(LxWxH)
Hole spacing
220 mm
for surface mounting:
As at 09/02
L1 N
DC 24 V/approx. 150 mW
E1
E2
N
A Bus coupler
4. Settings in the EIB Tool Software (ETS)
Selection in the product database
Manufacturer:
Product family:
Product type:
Program name:
Media type:
Product name:
Order number:
Merten
4.6
Dimming actuator
4.6.02 Built-in BI
Dimming 3232
Twisted Pair
Dimming actuator built-in/230/500
W
659519
5. Application overview
The following application is available:
Application
Vers. Function
Dimming 3232
1
Switching
– with adjustable starting behaviour
– Memory function (last brightness
value)
– Feedback of the relay state
Dimming
– with variable dimming speed
Brightness value
– Dim or jump to value
2