AC11
11” Up/Down Cylinder – A-Lamp
Up/Down
FEATURES
Round cylinders with 10” self-flanged reflectors
accommodate higher wattage lamps for higher
mounting or greater light output. Illuminates
both up and down for direct/indirect lighting.
Clear tempered glass uplight shield keeps out
unwanted elements.
•• Self-flanged aluminum reflector prevents light
leaks and is available in assorted colors.
•• Standard cylinder colors are bronze, black,
white, or silver aluminum (must specify when
ordering).
EXAMPLE
AC11
t
SERIES
-
300/300
t
-
•• Custom colors are available–consult factory.
•• The Williams Downlighting universal wall
mounting hub allows the fixture to be preinstalled without the housing to provide
temporary lighting and prevent damage to the
housing during finishing.
•• All-aluminum cylinder components dissipate
heat for cooler operation.
•• This fixture is proudly made in the USA.
PS25IF/M E D
t
-
t
WATTAGE WATTAGE
UPDOWN
WHT
-
t
LAMP
BASE
CS
-
OP TIONS
t
HOUSING
REFLECTOR
FINISH FINISH
ORDERING INFORMATION
VOLTAGE
AC11
11” Round Up/Down
Cylinder–A-Lamp
ASQC11 11” Square Up/Down
Cylinder–A-Lamp
Visit hewilliams.com for more information.
See page 427 for lens/trim options.
Trim and lens options limited to downlight
reflector only.
MWT
Matte white trim
MB
Micro-baffle
LD
Luminous disk
LDO
Luminous disk open
LR
Luminous ring
AC/CGS Accent cone with clear glass lens
AC/CPS Accent cone with clear prismatic
tempered glass lens
AC/FF
Accent cone with fresnel glass lens
MB/CGS Micro-baffle with clear glass lens
MB/CPG Micro-baffle with clear prismatic
tempered glass lens
Micro-baffle with fresnel glass lens
MB/FF
F
Fuse (2)
WET/CC 1 Listed as wet location under
covered ceiling 1
LAMP OPTIONS
LAMP BASE
PS25IF/MED
HOUSING FINISH (Must specify)
ALUM
BLK
BRZ
WHT
t
OPTIONS OPTIONS
11” Round Up/Down Cylinder–
A-Lamp
WATTAGE
150/150, 200/200, or 300/300
120
COMPLETE SERIES OFFERING
SERIES
AC11
-
t
Silver aluminum housing
Black housing
Bronze housing
White housing
REFLECTOR FINISH
See page 427 for trim options.
CS
Clear semi-specular (standard)
SPC
Clear specular
CG
Champagne gold
GD
Gold
PW
Pewter
SG
Satin-glow
STR
Straw
WT
Wheat
15-7/16”
41-9/16”
VOLTAGE
120
1
120V
UL/CUL listed as wet location under covered ceiling when
specified with __/CGS, __/CPG, or __/FF option.
ø10”
ø11-11/16”
SPECIFICATIONS
•• Housing – Heavy-gauge aluminum construction.
•• Housing Finish – Polyester powder coat bonded
to phosphate-free, multi-stage pretreated metal.
•• Reflector – Low-iridescent aluminum. Clear semispecular (CS) finish standard.
•• Shielding – Clear tempered glass uplight lens
standard.
•• Electrical – Porcelain sockets. Prewired at
factory for easy field installation.
•• Mounting – Wall mount only. See page 301 for
mounting information.
•• Labels – UL/CUL listed for dry or damp locations.
UL/CUL listed as wet location under covered
ceiling when specified with WET/CC option
(requires __/CGS, __/CPG, or __/FF option).
FOOTCANDLE ESTIMATOR
AC11-300/300
10.0
5.0
1.0
0.0
Footcandle calculations
based on standard wall
reflectance of .30 with
a ground reflectance of
.0 and a light loss factor
of .90.
15’
Fixture installed at 15’
mounting height on a
30’ wall.
5’
10’
15’
0’
25’10’
www.hewilliams.com
Information contained herein is subject to change without notice.
LGV31157.082313MP
Surface Incandescent
385