DRY FILM THICKNESS GAUGES DESCRIPTION STOCK NO. Elcometer 157, 20903401 Pencil Pull-Off Probe, Ferrous Pre-calibrated, easy-to-use, ideal for spot check indications of coating thickness. Insensitive to hot and cold coatings or surfaces. RANGE 0-25 mils. ACCURACY + 15% • Complies with ASTM D-1186 Elcometer 211 Manual Pull-Off Probe, A1E, Ferrous 20903077 2E, Ferrous 20903042 8E, Ferrous 20903043 Lightweight, portable and rugged, suitable for use in any environment. Complete with leather carrying pouch, wrist strap and calibration foils. Size: 9” x 2” x 1” 0-40 mils. 0-70 mils. 25-250 mils. + 5% + 5% + 5% • Complies with ASTM D-1186, G 12, ASTM B 499, SSPC PA 2 Elcometer 300 Basic Models: Ferrous/Non-Ferrous F/NF 20903078 0-50 mils. F 0-40mils NF + 1% + 1% 20903404 0-50 mils.F 0-40mils NF + 1% + 1% 20903405 20903406 20903407 20903408 20903409 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Statistics Models: Ferrous/Non-Ferrous, Printer Capability Options: Portable Printer w/Cable Printer Cable Interface Lead to IBM PC ASCII Software and Cable Data Collection Software An accurate, simple, quick, non-destructive coating thickness gage. Manufactured of ABS plastic, the 300 is portable and lightweight. Three models available. • Complies with ASTM D-1186, D-1400 Elcometer 345 2 Key SSG Steel Structures Gage 2 Key, 20903079 Electronic Integral Probe Features include larger foot for better stability, auto-on, zero offset for rough surface calibration, tamperproof calibration, liquid crystal display and auto-off. Available in mil or micron readout. For pricing, availability and order placement, please call our 0-60 mils. + 3% • Complies with SSPC PA-2 Instrument Hotline 1-800-422-RUST (7878) 5 DRY FILM THICKNESS GAUGES DESCRIPTION STOCK NO. RANGE ACCURACY 0-60mils. 0-200mils. 0-500mils. + 3% + 3% + 3% 0-60mils. + 3% 0-60mils. + 3% 0-60mils. + 3% Elcometer 345 - 4 Key Coating Thickness Gage Basic Models: 345F1, Integral Probe, Ferrous 20903080 345F2, Integral Probe, Ferrous 20903081 345F3, Electronic Separate Probe, 20903082 Ferrous 345N1, Electronic Integral Probe, 20903084 Non-Ferrous 345FN1, Electronic Integral Probe, 20903410 Ferrous or Non-Ferrous 345FNF1, Electronic Dual Separate 20903083 Probe, Ferrous/Non-Ferrous A microprocessor controlled digital dry film thickness gage for measuring protective coatings over ferrous or non-ferrous substrates. Available with either an integral or separate probe. Gages read in mils or microns. • Compiles with ASTM D-1186; D-1400 Size: 2.2: x 4.75” Elcometer 345 - 9 Key Statistical Model: 345F1, Separate Probe, Ferrous 345F2, Separate Probe, Ferrous 20903411 20903412 345F3, Separate Probe, Ferrous 20903413 345N1, Separate Probe, 20903085 Non-Ferrous 345FN1, Separate Probe, 20903414 Ferrous / Non-Ferrous 345FNF1, Dual Probe, 20903083 Ferrous / Non-Ferrous Full statistics (mean, number of readings, standard deviation), memory (up to 16,000 readings) and built-in RS232 data output to printer or PC or HP IR printer. Mils or micron readings. 0-60mils. 0-200mils. 0-5mm 0-500mils. 0-13mm 0-60mils. + 3% + 3% 0-60mils. + 3% 0-60mils. + 3% + 3% + 3% • Compiles with ASTM D-1186; D-1400 Elcometer 355 Digital Coating Thickness Gage System Ferrous/Non-Ferrous 20903087 The 355 Top model has all the Standard model features plus 28 keys to allow for user-defined batch identification, 10,000 reading memory capacity, high/low reasonable limits, password protection of calibration and set up, mean, standard deviation, highest and lowest reading, average and counted average mode. 0-60mils. + 1% • Compiles with ASTM D-1186; D-1400 Size: 6.9” x 3.3” x 1.6” For pricing, availability and order placement, please call our 6 Instrument Hotline 1-800-422-RUST (7878) DRY FILM THICKNESS GAUGES DESCRIPTION STOCK NO. RANGE ACCURACY 20903416 20903417 20903418 0-2000um 0-2000um 0-2000um + 3% + 3% + 3% Mikrotest Exacto Compact design for one-hand operation integrated probe. Three versions available Type F - Ferrous Type N - Non-ferrous Type FN - Combination F/NF Mikrotest Models III and IV Coating Thickness Gage Model III: Accurate, portable , lightweight measures non-magnetic coatings over ferrous substrates. Can be used on cylindrical parts. Manual Models: FM Pull-Off Type, Ferrous 20903095 GM Pull-Off Type, Ferrous 20903094 Model IV: Similar to Model III, except the dial moves and stops automatically, minimizing operator error. Automatic Models: FM Pull-Off Type, Ferrous 20903097 GM Pull-Off Type, Ferrous 20903096 S3M Pull-Off Type, Ferrous 20903098 S5M Pull-Off Type, Ferrous 20903099 Ni100 Automatic Type 20903100 • Compiles with ASTM B499; D1186;G12,B530;DIN50981;50982 BS5411;ISO 2178,2361 0-40mils 0-4mils. + 5% + 5% 0-40mils. 0-4mils. 8-120mils. 20-200mils. 0-4mils. + 5% + 5% + 5% + 5% + 5% Size: 8.25” x 2” x 1.25” Minitest 100/300 Coating Thickness Gage 100F, Digital Gage, Ferrous 20903101 0-60mils. + 2% 100N Digital Gage, Non-Ferrous 20903102 0-60mils. + 2% 100FN Digital Gage, Ferrous / Non-Ferrous 20903421 0-60mils. + 2% 300F Statistical Gage, Ferrous 20902422 0-60mils. + 2% 300N Statistical Gage, NonFerrous 20903423 0-60mils. + 2% 300 FN Statistical Gage, Ferrous / Non-Ferrous 20903424 0-60mils. + 2% Miniature lightweight digital coating thickness gages that measure all non-magnetic coatings applied to ferrous metal substrates. Model 300 has optional readings in microns or mils, a continuous measuring model, and audible signal for readings outside limits. Also on the Minitest • Compiles with ASTM D 1186 300 memory for individual reads. Includes one 6V battery. Size: 125 mm x 27mm x 18mm For pricing, availability and order placement, please call our Instrument Hotline 1-800-422-RUST (7878) 7 DRY FILM THICKNESS GAUGES DESCRIPTION STOCK NO. RANGE ACCURACY Minitest 600 600 F Separate Probe, Statistical Gage, Ferrous 20903090 600 N Separate Probe, Statistical Gage, Non-Ferrous 20903092 600FN Separate Probe, Statistical, Ferrous / Non-Ferrous 20903091 Available as a read-only model (basic) or with an internal statistics package that computes and displays high/low values, number of readings, mean and standard deviation. Complete with probe and 9V battery. Size: 2.5” x 4.5” x 1” 0-60mils. + 2% 0-60mils. + 2% 0-60mils. + 2% 0-80mils. + 2% 0-80mils. + 2% 0-80mils. 0-80mils. 0-16mils. + 2% + 2% + 2% 0-80mils. 0-400mils. 0-800mils. 0-80mils. + 2% + 2% + 2% + 2% 0-80mils. 0-400mils 0-800mils. + 2% + 2% + 2% 0-4inches + 2% Minitest 1100, 2100 & 4100 Portable coating thickness gages for use on both ferrous and non-ferrous metal substrates. 10,000 reading memory capcity. 1100 FN2 Dual Probe, Ferrous / Non-Ferrous 20903088 2100 FN2 Dual Probe, Statistical Model 20903089 Probes: FN-3 Dual ferrous/non-ferrous 20903425 F-2 For paint, enamel, electroplating 20903426 F-06 Micro-probe for small parts 20903427 F-2/90 Right angle probe for tubes and pipes 20903428 F-10 For thick coatings and linings 20903429 F-20 For thick coatings and linings 20903430 N-2 For non-conductive coatings 20903431 N-2/90 Right angle probe for tubes and pipes 20903432 N-10 For thick coatings and linings 20903433 N-20 For thick coatings and linings 20903434 N-100 For insulating coatings over F&N 20903435 Model 4100 adds a 20903467 wide range of additional statistical capabilities.Includes dual probe, alkaline battery, and zero standard and calibration foils. • Compiles with ASTM D-1186; D-1400 PosiPen A - Manual Pull-Off Type, Ferrous 20900129 B - Manual Pull-Off Type, Ferrous Extreme temperatures to 450o F 20900131 Miniature pull-off gage measures non-magnetic coatings applied to ferrous substrates. Dual mils/microns scale, and triple indicator. Complete with leather pouch and certificate of calibration. 0.25-20mils + 10% 0.25-20mils + 10% • Compiles with ASTM D-1186 SSPC PA-2 • Accuracy + 10% and 0.1 mil, traceable to NIST Size: 5 1/2” long For pricing, availability and order placement, please call our 8 Instrument Hotline 1-800-422-RUST (7878) DRY FILM THICKNESS GAUGES DESCRIPTION STOCK NO. RANGE ACCURACY PosiTector 100 B - Thin Coating C - Thick Coating D - Thick, Soft Coatings Portable ultrasonic gage nondestructively measures single or multiple layer coating thickness on non-metallic surfaces. Model B is designed for measuring thin polymer coatings on non-metal substrates. Model C is the universal gage that can be user-adjusted to measure a variety of thick coating applications. Complete with plastic carrying case, AC adapter, certificate of calibration, ultrasonic gel and batteries. 20903427 20903438 20903439 0.3-20mils. +0.1mils,+ 3% 2-175 mils. +0.1mils,+ 3% 48-350 mils. +0.1mils,+ 3% • Compiles with ASTM D6132-97 PosiTector 6000 Non-Magnetic Coatings on Ferrous Metals F - Electronic Integral Probe 20903052 FS - Electronic Separate Probe 20903060 F0S - Electronic Separate 0o Probe 20903059 F45S - Electronic Separate 45o Probe 20903053 F90S - Electronic Separate 90o Probe 20903054 FT - Electronic Integral Probe, Thick Films 20903061 FHS - Electronic Separate Probe, Thick Films 20903056 Non-Conductive Coatings on Non-Ferrous Metals N - Electronic Ingegral Probe 20903062 NAS - Electronic Separate Probe, Thin Films 20903066 NS - Electronic Separate Probe 20903068 NOS - Electronic Separate Straight Probe 20903067 o N45S - Electronic Separate 45 Probe 20903063 N90S - Electronic Separate 90o Probe 20903064 NHS - Electronic Separate Probe, Non-Ferrous 20903056 Combination - All Metals FNS - Electronic Separate Probe, Ferrous / Non-Ferrous 20903056 FN - Electronic Integral Probe, Ferrous / Non-Ferrous 20903057 0-60mils. 0-60mils. 0-25mils. 0-25mils. 0-25mils. + 1% + 1% + 1% + 1% + 1% 0-250mils. + 1% 0-750mils. + 1% 0-60mils. + 1% 0-2mils. 0-60mils. + 1% + 1% 0-25mils. 0-25mils. 0-25mils. + 1% + 1% + 1% 0-750 mils + 1% 0-750mils. + 1% 0-60mils. + 1% HP IR Wireless Printer The simplest way to print coating 20903440 n/a thickness measurements from PosiTector 100 and 6000 memory gages. Invisible infrared light is instantly beamed from the PosiTector directly to the HP IR. Uses standard 2 1/4” thermal paper. Powered by 4-AA batteries. Size: 7.3” x 3.6” x 2.5”, Weight: 1 pound For pricing, availability and order placement, please call our n/a Instrument Hotline 1-800-422-RUST (7878) 9 DRY FILM THICKNESS GAUGES DESCRIPTION STOCK NO. RANGE ACCURACY 20900126 0-8mils. + 5% 20900127 0-80mils. + 5% PosiTest GM - Manual Pull-Off Type, Thin Films FM - Manual Pull-Off Type, Ferrous A magnetic coating thickness gauge for non-destructive measurement of non-magnetic coatings over ferrous substrates. Size: 8 1/2” x 2 1/2” x 1 1/4” • Compiles with ASTM D-1186; A153,B499,B530,E376,BS5411, DIN50981,50982, 1502178, SSPC PA-2 QuaNix 232 232 F1 - Separate Probe, Ferrous / 20903446 Non-Ferrous Statistical PC Printing Model Virtual gage connects to PC or laptop and in conjunction with QuaNix software has a complete test and documentation system for lab and production control. 0-80mils. + 2 - 3.5% 0-80mils. + 2% 0-200mils. + 2 - 5% 0-200mils. + 2 - 5% QuaNix 1200 Non-destructively measures coating 20903010 thickness over ferrous metal substrates. Lightweight, low-cost and durable, designed for easy, one-handed operation. The “V” groove facilitates measurements on curved surfaces. Thousands of measurements possible from one 9V battery (included). Automatic on/off, duplex LCD display. Appearance very similar to 1500. Size: 6 1/2” x 2 1/2” x 1 1/3” Weight: 5 0z. (including battery) QuaNix 1500 1500 - Integral Probe, Ferrous / Non-Ferrous 20903011 1500M - Integral Probe, Ferrous/ Non-Ferrous with Memory 20903464 Low-cost portable coating thickness gage measures all non-magnetic coatings over both ferrous and non-ferrous metal surfaces. Two integrated probes enable the 1500 to measure virtually any application, even in hard-to-reach areas. Features include LCD display in mils and microns, carrying case and 9V battery. The 1500M also offers memory, block segmentation, instant averaging, and RS-232 download capability. Complete with software and patchcord. • Compiles with ASTM D-1186 and ASTM D-1400 Size: 6 1/2” x 2 1/2” x 1 1/3”, Weight: 5 oz. (including battery) For pricing, availability and order placement, please call our 10 Instrument Hotline 1-800-422-RUST (7878) DRY FILM THICKNESS GAUGES DESCRIPTION STOCK NO. RANGE ACCURACY QuaNix 2200 and 2300 2200 - Digital Integral Probe, Ferrous 20903012 0-60mils. + 2% 2300 - Digital Integral Probe, Non-Ferrous 20903013 0-60mils. + 2% Portable, battery-operated (9V) digital coating thickness gages measure all non-magnetic coatings over ferrous • Compiles with ASTM D-1186 (2200) metal (2200) and non-ferrous metal • Compiles with ASTM D-1400 (2300) (2300) substrates (aluminum, copper, etc.). Complete with carrying strap, carrier bag, zero-plate, and 9V battery. Available in mils or microns. Size: 2” x 4 1/2” x 1” QuaNix 5500 5500FN1 - Ferrous/Non-Ferrous Probe, Statistical Printing 20903014 Combines a hand-held measurement device and a printer all into one gage. Provides upper and lower tolerance settings, continuous readings, and calibration settings for special applications. Statistical evaluation including high/low, average standard deviation can be stored or printed out immediately. Values can be reviewed with the QuaNix software program or can be transferred into a statistical spreadsheet program. 0-80mils. + 2% 0-80mils. + 2% 0-80mils. + 2% 0-80mils. + 2% 0-80mils. + 2% Size: 5” x 3 1/2” x 1 1/2” QuaNix 7500 7500 - Integral Ferrous Probe, Basic Model 20903015 7500 - Integral Non-Ferrous Probe, Basic Model 20903447 7500 - Integral Dual Ferrous & Non-Ferrous Probe 20903448 7500 Underwater Probe, Ferrous or Non-Ferrous Statistical Model with 100 ft. cable 20903016 Versatile coating thickness gauge has the capability to measure coating thickness underwater using a remote probe (up to 200 feet) and topside gage. Measures non-magnetic coating thickness on both ferrous and non-ferrous metal surfaces by switching probes. 7500M with memory can hold up to 3,900 measurements in up to 999 blocks. Downloading capability to QuaNix software for statistical analysis also available. Complete with leather pouch and 9V battery. For pricing, availability and order placement, please call our Instrument Hotline 1-800-422-RUST (7878) 11 DRY FILM THICKNESS GAUGES Three types of dry film thickness gages are available: • Magnetic pull-off, (Type I) for measuring non-magnetic coating thickness over ferrous metal surfaces. • Electronic magnetic flux, constant pressure probe (Type II) for measuring non-magnetic coating thickness over ferrous metal surfaces. • Eddy current gages for measuring non-magnetic coating thickness or non-ferrous metal surfaces. Helpful Hints - Dry Film Thickness Gages • Calibration of magnetic gages should be done in accordance with SSPC-PA2, “SSPC method for measurement of dry paint thickness with magnetic gages.” • Verify calibration of Type I gages before, during and after use, using NIST standard plates. • Exposed magnets naturally attract iron fillings, steel grit, etc. Assure the magnet is free of contamination, including paint. • Vibrations may prematurely lift the magnet from the surface, giving erroneous readings. • Dial gages are susceptible to “human error” by continuing to turn the dial beyond the point the magnet lifts from the surface. • Calibration of constant pressure probe gages should be done in accordance with SSPC-PA2, “SSPC Method for Measurement of Dry Coating Thickness with Magnetic Gages”. • Verify calibration of Type II gages before, during, and after use, using either traceable standards (test blocks) or • • • plastic shims (reference the manufacturer’s instructions). Many electronic gages can be susceptible to flux leakage problems within a few inches from edges or corners. Eddy current gages for use on non-ferrous metals are calibrated using only the plastic shim method. Constant pressure probe gages are less susceptible to vibrations. CSI Coating Systems Inc. a Corrpro Company CSI provides complete protective coating systems engineering and application services. Experienced in all aspects of corrosion control, our approach is to investigate your corrosion problems and recommend coating solutions. CSI offers internal and external fusion bonded powder coatings, internal and external liquid systems, metallizing, fiberglassing, and plural component applications. Our extralarge 55 foot curing oven and automated “in-line” process equipment ensures efficient application. Our head office and shop facility is located in Nisku, Alberta, Canada. For maximum efficiency our 30,000 square foot facility is equipped with four 7.5 tonne overhead cranes, with craneways extending fully outside the building. Every project is inspected by CSI’s full time NACE Certified Coating Inspector at critical “hold” points, as defined in our Quality Assurance Program, assuring the end product meets specification and is delivered on time. CSI maintains all records on each project for review and audit when requested. CSI’s complete fleet of mobile equipment allows us to prepare the surface, coat, cure, and inspect coating applications at any site. Typical jobs include internal epoxy and/ or fiberglass reinforced linings and external coating of vessels and large diameter storage tanks. CSI also owns large indirect-fired heaters needed during cold weather jobs, so CSI can perform coatings in any season, on any size of storage tank. For pricing, availability and order placement, please call our 12 Instrument Hotline 1-800-422-RUST (7878)