DStacker GS4 Latch Height Adjustment
Latch Adjustment For STEP 1
TALL PALLETS Step 1: Loosen two black handles slightly in order to mobilize the internal frame. Step 2: To raise the internal latch frame, li; evenly on both handles un>l the frame reaches its full travel height. Step 3: Next, push downward on the handles slightly un>l the frame rests in the upper posi>on. Proper posi>oning is achieved when the top of the rounded silver cover is even with the >p of the TALL PALLETS label. Step 4: Gently re>ghten the two handles, locking the frame in its TALL PALLETS posi>on. STEP 2
STEP 3
STEP 4
!
NOTE: Ensure frame is NOT locked too high as the latches will not func>on properly and latch damage could result.
Too High!
Latch Adjustment For SHORT PALLETS Step 1: Loosen two black handles slightly in order to mobilize the internal frame. Step 2: Li; evenly on both handles un>l the frame reaches its full travel height. Step 3: Holding the frame in the upper posi>on with one hand, li; up on the square rod handle. This releases the frame lock, allowing the frame to travel past the internal frame stop. STEP 1
STEP 3
STEP 2
STEP 4
Step 4: Lower the frame completely while holding the square rod handle up. Step 5: Gently re>ghten the two handles, locking the frame in the SHORT PALLETS posi>on. Proper posi>oning is achieved when the boKom of the rounded silver cover is even with the >p of the SHORT PALLETS label. OCT 2014