Torque Values for A2 or A4 Metric Stainless Steel Fasteners Bolt Dia (mm) 3 4 5 6 8 10 12 14 16 18 20 22 24 Torque (N-m) Dry 1.0 2.6 5.1 8.7 21.2 42 73 118 180 258 370 485 603 Lubricated 0.9 2.3 4.6 7.8 19.1 38 66 106 162 232 333 437 543 Torque (in-lbs. through M10; M12 & over ft-lbs.) Dry Lubricated 8.9 in-lbs. 8.0 in-lbs. 23.0 20.7 45.1 40.6 77.0 69.3 188 169 372 335 54 ft-lbs. 48 ft-lbs. 87 78 133 119 190 171 273 246 358 322 445 400 Suggested Maximum Torquing Values - a guide based upon actual lab testing on dry or near dry fasteners wiped clean. The lubricated values were calculated at 90% of the dry condition test results. Values listed in N-m; in-lbs. up through M10, and foot-pounds for M12 and over. Note: Stainless steel fasteners tend to gall while being tightened. The risk of galling or thread seizing can be reduced by: Using lubrication Tighten fasteners with low rpm’s; without interruptions Apply only light pressure Avoid prevailing torque lock nuts when possible