NOTE TO USERS
ABOUT REVISION N OF THE AT-MIO-16DE-10
NI-DAQ Users
AT-MIO-16DE-10 revision N boards require NI-DAQ version 5.1 or
greater for Windows 95/NT, or version 5.0.4 for Windows 3.1x. If you
have an earlier version of NI-DAQ, you must upgrade your driver software.
AT-MIO-16DE-10 revision N replaces revision D, which will be
discontinued after March 1, 1999.
Register-Level Programmers
If you are doing register-level programming, use the AT-MIO-E Series
Register-Level Programmer Manual, part number 340747C-01 or later
(kit number 777189-01) for detailed register information. To determine
which revision of the manual you have, refer to the part number on
the cover or title page of the manual. The letter before the -01 is the
revision letter.
CE Compliance
AT-MIO-16DE-10 Revision N requires the shielded cable, SH1006868 (kit
number 183849), to comply with CE emission requirements.
NI-DAQ ™ is a trademark of National Instruments Corporation. Product and company names are trademarks or trade names of their respective
companies.
321838A-01
© Copyright 1998 National Instruments Corp. All rights reserved.
March 1998