Victaulic® Grooved End Fittings
07.01
No. 20 Tee
No. 10 Elbow
1.0 PRODUCT DESCRIPTION
Available Sizes
• ¾ – 60"/20 – 1500 mm
Maximum Working Pressure
• Fitting pressure ratings are equivalent to the pressure ratings of the coupling used to install them.
Application
• Connects pipe, provides change in direction and adapts sizes or components.
• Supplied with Victaulic OGS grooves.
• Exclusively for use with Victaulic couplings, valves, accessories and pipe which feature ends formed with the
Victaulic OGS groove profile.
Pipe Materials
• Carbon Steel or Stainless Steel
NOTE
• These fittings are not intended for use with Victaulic plain end couplings. Intended for use only in grooved piping systems. When connecting wafer or lug type
butterfly valves directly to Victaulic fittings using Style 741 or Style 743 flange adapters, be sure to check disc clearance dimensions with I.D. dimension of
fitting.
ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.
System No.
Location
Spec Section
Paragraph
Submitted By
Date
Approved
Date
victaulic.com
07.01 1449 Rev AB Updated 04/2016
© 2016 Victaulic Company. All rights reserved.
1
victaulic.com
1.0 PRODUCT DESCRIPTION (Continued)
Other Fitting Styles
AGS - Advanced Groove System
from 14 – 60”/350 – 1500 mm
Publication 20.05
Ductile Iron for AWWA size pipe
Publication 23.05
Stainless Steel
Publication 17.16
XL fittings for abrasive services
Publication 07.07
Galvanized
Publication 07.01 for Original Groove Fittings
Publication 20.05 for AGS Fittings
Aluminum
Publication 21.03
Extra Heavy EndSeal “ES”
Publication 07.03
Shouldered Ends
Publication 07.06
Copper
Publication 22.04
Plain End
Publication 14.04
07.01 1449 Rev AB Updated 04/2016
victaulic.com
© 2016 Victaulic Company. All rights reserved.
2
victaulic.com
2.0 CERTIFICATION/LISTINGS
NOTES
• When supplied as “hot dip galvanized” the following fittings are UL Classified in accordance with ANSI/NSF 61 and for use on cold +86ºF/+30ºC potable water
service and ANSI/NSF 372: No. 10 90º Elbow, No. 11 45º Elbow, No. 12 22 ½º Elbow, No. 13 11 ¼º Elbow, No. 100 90º Long Radius Elbow, No. 110 45º Long
Radius Elbow, No. 20 Tee, No. 25 Tee with Grooved Branch, No. 30 45º Lateral, No. 60 Cap, No. 50 Concentric Reducers, No. 51 Eccentric Reducers.
• The following Victaulic fittings are VdS approved: No.10 90º Elbow, No.11 45º Elbow, No.20 Tee and No.60 Cap.
• The following Victaulic fittings are LPCB approved: No.10 90º Elbow, No.11 45º Elbow, No.12 22 ½ Elbow, No.13 11 ¼º Elbow, No.30 45º Lateral, No.30-R
Reducing Lateral, No.100 Long Radius Elbow, No.110 Long Radius Elbow, No.20 Tee, No.35 Cross, No.60 Cap, No.25 Reducing Tee, No.33 True Wye, No.50
Concentric Reducer, No.51 Eccentric Reducer and No.29M Tee with Threaded Branch.
3.0 SPECIFICATIONS - MATERIAL
Fitting: (specify choice)
Standard: Ductile iron conforming to ASTM A-536, Grade 65-45-12.
Optional: Segmentally welded steel as shown under nipples
Nipples: (specify choice)
¾ – 4"/20 – 100 mm: Carbon steel, Schedule 40, conforming to ASTM A-53, Type F
5 – 6"/125 – 150 mm: Carbon steel, Schedule 40, conforming to ASTM A-53, Type E or S, Gr. B
8 – 12"/200 – 300 mm: Carbon steel, Schedule 30 or 40, conforming to ASTM A-53, Type E or S, Gr. B
Flanged Adapter Nipples: (specify choice)
Class 125 Flange: Cast iron conforming to ANSI B-16.1
Class 150 Flange: Carbon steel conforming to ANSI B-16.5, raised or flat face
Class 300 Flange: Carbon steel conforming to ANSI B-16.5, raised or flat face
Fitting Coating: (specify choice)
Standard: Orange enamel
Optional: Hot dip galvanized and others. Some fittings supplied electroplated as standard – see product
specifications
Flanged Adapter Nipple Coating: (specify choice)
Standard: None (Unfinished)
Optional: Orange enamel, hot dip galvanized and others
07.01 1449 Rev AB Updated 04/2016
victaulic.com
© 2016 Victaulic Company. All rights reserved.
3
victaulic.com
4.0 DIMENSIONS
Flow Data
(Frictional Resistance)
The chart expresses the frictional resistance of various Victaulic fittings as equivalent feet of straight pipe. Fittings not
listed can be estimated from the data given, for example, a 22½º elbow is approximately one-half the resistance of a
45º elbow. Values of mid-sizes can be interpolated.
Size
Nominal
Size
inches
DN
1
DN25
2
DN50
DN65
3
DN80
4
DN100
DN125
5
6
DN150
8
DN200
10
DN250
12
DN300
14
DN350
16
DN400
18
DN450
20
DN800
24
DN600
Dimensions
Actual
Outside
Diameter
inches
mm
1.315
33.7
2.375
60.3
3.000
76.1
3.500
88.9
4.250
108.0
4.500
114.3
5.250
133.0
5.500
139.7
5.563
141.3
6.250
159.0
6.500
165.1
6.625
168.3
8.625
219.1
10.750
273.0
12.750
323.9
14.000
355.6
16.000
406.4
18.000
457.0
20.000
508.0
24.000
610.0
90° Elbows
45° Elbows
No. 100
No. 110
No. 10
1 1/2 D Long
No. 11
1 1/2 D Long
Std. Radius
Radius
Std. Radius
Radius
feet
feet
feet
feet
meters
meters
meters
meters
1.7
0.8
—
—
0.5
0.2
3.5
2.5
1.8
1.1
1.1
0.8
0.5
0.3
4.3
2.1
—
—
1.3
0.7
5.0
3.8
2.6
1.6
1.5
1.2
0.8
0.5
6.4
3.2
—
—
2.0
0.9
6.8
5.0
3.4
2.1
2.1
1.5
1.0
0.6
8.1
4.1
—
—
2.5
1.2
8.5
4.2
—
—
2.6
1.3
8.5
4.2
—
—
2.6
1.3
9.4
4.9
—
—
2.9
1.5
9.6
5.0
—
—
2.9
1.5
10.0
7.5
5.0
3.0
3.0
2.3
1.5
0.9
13.0
9.8
6.5
4.0
4.0
3.0
2.0
1.2
17.0
12.0
8.3
5.0
5.2
3.7
2.5
1.5
20.0
14.5
10.0
6.0
6.1
4.4
3.0
1.8
15.8
18.51
11.0
24.51
7.5
4.8
5.6
3.4
18.0
21.01
13.0
28.01
8.5
5.5
6.4
4.0
31.01
20.0
23.51
14.0
9.5
6.1
7.2
4.3
34.01
22.5
25.51
16.0
10.4
6.9
7.8
4.9
42.01
27.0
29.51
19.0
12.8
8.2
9.0
5.8
AGS fittings available up to 60”/1500 mm. Contact Victaulic for details.
1Fitting
Tees
Branch
feet
meters
4.2
1.3
8.5
2.6
10.8
3.3
13.0
4.0
15.3
4.7
16.0
4.9
20.0
6.2
21.0
6.4
21.0
6.4
25.0
7.6
25.0
7.6
25.0
7.6
33.0
10.1
41.0
12.5
50.0
15.2
70.0
21.3
80.0
24.4
90.0
27.4
100.0
30.5
120.0
36.6
Run
feet
meters
1.7
0.5
3.5
1.1
4.3
1.3
5.0
1.5
6.4
2.0
6.8
2.1
8.1
2.5
8.5
2.6
8.5
2.6
9.6
2.9
10.0
3.0
10.0
3.0
13.0
4.0
17.0
5.2
20.0
6.1
23.0
7.0
27.0
8.2
30.0
9.1
33.0
10.1
40.0
12.2
flow data for 14-24”/350-600 mm size No. 10 and No. 11 Elbows is based on fittings for Style 07 and 77 couplings. For flow data on AGS fittings (No.
W10 and No. W11 Elbows), refer to publication 20.05.
07.01 1449 Rev AB Updated 04/2016
victaulic.com
© 2016 Victaulic Company. All rights reserved.
4
victaulic.com
4.1 DIMENSIONS
Elbows
No. 10 90° Elbow
No. 11 45° Elbow
No. 12 22 1/2° Elbow
No. 13 11 1/4° Elbow
No. 100 90° Long
Radius Elbow
No. 110 45° Long
Radius Elbow
C to E
E to E
C to E
C to E
C to E
C
to E
C to E
C to E
Standard and
GSNK
Size
Actual
Outside
Diameter
inches
mm
1.050
26.9
1.315
33.7
1.660
42.4
1.900
48.3
2.375
60.3
2.875
73.0
3.000
76.1
3.500
88.9
4.000
101.6
4.500
114.3
4.250
108.0
5.000
127.0
5.563
141.3
5.250
133.0
5.500
139.7
6.625
168.3
6.250
159.0
6.500
165.1
Nominal
inches
DN
3/4
DN20
1
DN25
1 1/4
DN32
1 1/2
DN40
2
DN50
2 1/2
DN65
3
DN80
3 1/2
DN90
4
DN100
4 1/2
DN120
5
DN125
6
DN150
2Gooseneck
No. 10
No. 11
90º Elbow
45º Elbow
Approx.
Approx.
Wgt.
Wgt.
C to E
(Each)
C to E
(Each)
inches
lb
inches
lb
mm
kg
mm
kg
2.25
0.5
1.50
0.5
57
0.2
38
0.2
2.25
0.6
1.75
0.6
57
0.3
44
0.3
2.75
1.0
1.75
0.9
70
0.5
44
0.4
2.75
1.2
1.75
0.9
70
0.5
44
0.4
3.25
1.8
2.00
1.3
83
0.8
51
0.6
3.75
3.2
2.25
2.2
95
1.5
57
1.0
3.75
3.7
2.25
3.4
95
1.7
57
1.5
4.25
4.5
2.50
3.1
108
2.0
64
1.4
4.50
5.6
2.75
4.3
114
2.5
70
2.0
5.00
7.1
3.00
5.6
127
3.2
76
2.5
5.00
11.0
3.00
5.6
127
5.0
76
2.5
5.25 (sw)
10.0
3.13 (sw)
6.0
133
4.5
79
2.7
5.50
11.7
3.25
8.3
140
5.3
83
3.8
5.50
11.7
3.25
8.3
140
5.3
83
3.8
5.50
11.7
3.25
8.3
140
5.3
83
3.8
6.50
17.2
3.50
10.8
165
7.8
89
4.9
6.50
18.6
3.50
10.8
165
8.4
89
4.9
6.50
15.5
3.50
9.8
165
7.0
89
4.4
No. 12
22½° Elbow
Approx.
Wgt.
C to E
(Each)
inches
lb
mm
kg
1.63 (sw)
—
41
0.6
3.252
83
0.3
1.75
0.8
44
0.4
1.75
0.8
44
0.4
1.88
1.2
48
0.5
4.002
2.3
102
1.0
2.25
—
57
3.1
4.502
114
1.4
2.50 (sw)
4.0
64
1.8
2.88
5.6
73
2.5
No. 13
11¼° Elbow
Approx.
Wgt.
C to E
(Each)
inches
lb
mm
kg
1.38 (sw)
—
35
1.38 (sw)
0.3
35
0.1
1.38 (sw)
0.5
35
0.2
1.38 (sw)
0.5
35
0.2
1.38
1.0
35
0.5
1.50
1.1
38
0.5
1.50
—
38
1.50
2.1
38
1.0
1.75 (sw)
2.7
44
1.2
1.75
3.6
44
1.6
No. 100
90° Long Radius
Elbow
Approx.
Wgt.
C to E
(Each)
inches
lb
mm
kg
2.50 (sw)
0.4
64
0.2
2.88 (sw)
0.6
73
0.3
3.25 (sw)
1.1
83
0.5
3.63 (sw)
2.2
92
1.0
4.38
2.5
111
1.1
5.13
3.4
130
1.5
No. 110
45° Long Radius
Elbow
Approx.
Wgt.
C to E
(Each)
inches
lb
mm
kg
1.88 (sw)
0.3
48
0.1
2.25 (sw)
0.5
57
0.2
2.38 (sw)
0.7
60
0.3
2.50 (sw)
1.3
64
0.6
2.75
1.8
70
0.8
3.00
2.8
76
1.3
—
—
—
—
5.88
149
6.0
2.7
3.38
86
4.9
2.2
—
—
—
—
7.50
191
12.3
5.6
4.00
102
7.3
3.3
—
—
—
—
—
—
—
—
3.50 (sw)
89
2.88 (sw)
73
6.6
3.0
7.8
3.5
1.88 (sw)
48
2.00 (sw)
51
4.2
1.9
5.0
2.2
—
—
—
—
9.25 (sw)
235
18.0
8.2
4.88 (sw)
124
14.8
6.7
—
—
—
—
—
—
—
—
2.88
73
6.252
159
—
—
—
—
—
12.2
5.5
2.00
51
2.00
51
7.0
3.2
10.75
273
30.4
13.8
5.50
140
17.4
7.9
—
—
—
—
—
—
—
—
3.13
79
11.4
5.2
2.00
51
7.4
3.4
10.75 (sw)
273
29.0
13.2
5.50 (sw)
140
19.0
8.6
—
design, end-to-end dimension fittings in this size, contact your nearest Victaulic sales representative.
3For
14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this
size, contact your nearest Victaulic sales representative.
4Chinese
standard sizes
(s) = Carbon Steel Direct Roll Groove (OGS)
(sw) = Carbon Steel Segmentally Welded
NOTE
• All fittings are ductile iron unless otherwise noted with an (sw) or (s).
07.01 1449 Rev AB Updated 04/2016
victaulic.com
© 2016 Victaulic Company. All rights reserved.
5
victaulic.com
4.1 DIMENSIONS (Continued)
Elbows
No. 10 90° Elbow
No. 11 45° Elbow
No. 12 22 1/2° Elbow
No. 13 11 1/4° Elbow
No. 100 90° Long
Radius Elbow
No. 110 45° Long
Radius Elbow
C to E
E to E
C to E
C to E
C to E
C
to E
C to E
C to E
Standard and
GSNK
Size
Actual
Outside
Diameter
inches
mm
8.625
219.1
10.750
273.0
12.750
323.9
14.000
355.6
14.843
377.0
16.000
406.5
16.773
426.0
18.000
457.2
18.898
480.0
20.000
508.0
20.866
530.0
24.000
609.6
24.803
630.0
Nominal
inches
DN
8
DN200
10
DN250
12
DN300
143
DN350
163
DN400
183
DN450
203
DN500
243
DN600
No. 10
90º Elbow
Approx.
Wgt.
C to E
(Each)
inches
lb
mm
kg
7.75
29.9
197
13.6
9.00
63.3
229
28.7
10.00
74.0
254
33.6
14.00
136.0
356
61.7
14.84
149.3
377
67.7
16.00
171.0
406
77.6
16.75
198.6
425
90.1
18.00
228.0
457
103.4
18.88
291.0
480
132.0
20.00
298.0
508
135.2
20.88
355.0
530
161.0
24.00
438.0
610
198.7
24.80
545.0
630
247.2
No. 100
No. 12
No. 13
90° Long Radius
22½° Elbow
11¼° Elbow
Elbow
Approx.
Approx.
Approx.
Wgt.
Wgt.
Wgt.
C to E
Each
C to E
(Each)
C to E
(Each)
inches
lb
inches
lb
inches
lb
mm
kg
mm
kg
mm
kg
7.752
20.0
2.00
10.1
14.25
66.0
197
9.1
51
4.6
362
30.0
4.38 (sw)
30.0
2.13
11.8
15.00
107.0
111
13.6
54
5.3
381
48.5
4.88 (sw)
40.0
2.25
29.3
18.00
156.0
124
18.1
57
13.3
457
70.8
5.00 (sw)
46.0
3.50 (sw)
32.0
21.00 (s) 164.0
127
20.9
89
14.5
533
74.4
No. 110
45° Long Radius
Elbow
Approx.
Wgt.
C to E
(Each)
inches
lb
mm
kg
7.25
36.0
184
16.3
6.25
57.0
159
25.9
7.50
90.0
191
40.8
8.75
82.0
222
37.2
—
—
—
—
—
—
—
—
5.00 (sw)
127
58.0
26.3
4.00 (sw)
102
42.0
19.1
24.00 (s)
610
210.0
95.3
10.00 (s)
254
100.0
45.4
—
—
—
—
—
—
—
—
5.50 (sw)
140
65.0
29.5
4.50 (sw)
144
53.2
24.1
27.00 (s)
686
273.0
123.8
11.25 (s)
286
135.0
61.2
—
—
—
—
—
—
—
—
6.00 (sw)
152
78.6
36.0
5.00 (sw)
127
65.0
29.5
30.00 (s)
762
343.0
155.6
12.50 (s)
318
174.0
78.9
—
—
—
—
—
—
—
—
7.00 (sw)
178
140.0
63.5
6.00 (sw)
152
60.0
27.2
36.00 (s)
914
516.0
234.1
15.00 (s)
381
251.0
113.9
—
—
—
—
—
—
—
—
For AGS fitting information, see publication 20.05
14 – 60
350 – 1500
2Gooseneck
No. 11
45º Elbow
Approx.
Wgt.
C to E
(Each)
inches
lb
mm
kg
4.25
20.4
108
9.3
4.75
37.5
121
17.0
5.25
66.7
133
30.3
5.75
65.0
146
29.5
6.13
82.0
156
37.2
6.63
88.0
168
39.3
7.00
101.3
178
45.9
7.50
108.0
190
50.0
7.83
141.7
200
64.3
8.25
138.0
210
62.6
8.63
179.0
219
81.2
10.00
221.0
254
100.2
10.25
255.2
261
115.7
design, end-to-end dimension fittings in this size, contact your nearest Victaulic sales representative.
3For
14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this
size, contact your nearest Victaulic sales representative.
(s) = Carbon Steel Direct Roll Groove (OGS)
(sw) = Carbon Steel Segmentally Welded
NOTE
• All fittings are ductile iron unless otherwise noted with an (sw) or (s).
07.01 1449 Rev AB Updated 04/2016
victaulic.com
© 2016 Victaulic Company. All rights reserved.
6
victaulic.com
4.2 DIMENSIONS
Reducing Base Support Elbow
No. R-10G Grv. × Grv.
No. R-10F Grv. × Flange
C to E
C to E
H
H
B Dia.
No. R-10
Reducing Base Support Elbow
Size
Nominal Size
inches
DN
6
DN150
x
8
DN200
10
DN250
C to E
inches
mm
9.00
229
9.00
229
10.50
267
12.00
305
4
DN100
5
DN125
6
DN150
8
DN200
x
x
B Dia.
H
inches
mm
1.25
32
1.50
38
2.13
24
2.40
61
Approx. Weight Each
B Diameter
inches
mm
1.50
38
1.50
38
1.50
38
1.50
38
Grv. x Grv.
lb
kg
19.0
8.6
23.0
10.4
33.0
15.0
61.0
27.7
Grv. x Flange
lb
kg
33.0
15.0
38.0
17.2
52.0
23.6
88.0
39.9
4.3 DIMENSIONS
Adapter Elbow
No. 18 90º Adapter Elbow
No. 19 45º Adapter Elbow
C to
GE
C to
GE
C to
TE
No. 18
90º Adapter Elbow5
Size
Actual
Outside
Diameter
inches
mm
1.050
26.9
1.315
33.7
1.660
42.4
1.900
48.3
2.375
60.3
2.875
73.0
3.500
88.9
4.000
101.6
6.625
168.3
Nominal
Size
inches
DN
3/4
DN20
1
DN25
11/4
DN32
11/2
DN40
2
DN50
21/2
3
DN80
31/2
DN90
6
DN150
5Available
C to
TE
C to GE
inches
mm
2.25
57
2.25
57
2.75
70
2.75
70
3.25
83
3.75
95
4.25
108
4.50
114
6.50
165
No. 19
45º Adapter Elbow5
Approximate
Weight
(Each)
lb
kg
0.5
0.2
0.5
0.2
0.9
0.4
1.1
0.5
2.5
1.1
3.0
1.4
5.8
2.6
8.0
3.6
17.6
8.0
C to TE
inches
mm
2.25
57
2.25
57
2.75
70
2.75
70
4.25
108
3.75
95
6.00
152
6.25
159
6.50
165
with British Standard Pipe Threads, specify “BSP” clearly on order.
07.01 1449 Rev AB Updated 04/2016
victaulic.com
© 2016 Victaulic Company. All rights reserved.
7
Approx.
C to GE
inches
mm
1.50
38
C to TE
inches
mm
1.50
38
Weight
(Each)
lb
kg
0.5
0.2
—
—
—
—
—
—
1.75
44
1.75
44
0.9
0.4
—
—
—
2.25
57
2.50
64
5.25
133
3.50
89
2.25
57
4.25
108
5.25
133
3.50
89
2.3
1.0
5.0
2.3
8.8
4.0
12.7
5.8
victaulic.com
4.4 DIMENSIONS
Tees, Crosses and True Wyes
C to E
C to LE
C to E
C to
GE
C
to
E
Size
Actual
Outside
Dimeter
inches
mm
1.050
26.9
1.315
33.7
1.660
42.4
1.900
48.3
2.375
60.3
2.875
73.0
3.000
76.1
3.500
88.9
4.000
101.6
4.250
108.0
4.500
114.3
5.000
127.0
5.250
133.0
5.500
139.7
5.563
141.3
6.250
159.0
6.500
165.1
6.625
168.3
8.625
219.1
10.750
273.0
12.750
323.9
Nominal
inches
DN
3/4
DN20
1
DN25
11/4
DN32
11/2
DN40
2
DN50
21/2
DN65
3
DN80
31/2
DN90
4
DN100
41/2
DN120
DN125
5
6
DN150
8
DN200
10
DN250
12
DN300
No. 20
Tee
Approx.
Weight
C to E
(Each)
inches
lb
mm
kg
2.25
0.6
57
0.3
2.25
1.0
57
0.5
2.75
1.5
70
0.7
2.75
2.0
70
0.9
3.25
3.0
83
1.4
3.75
4.3
95
2.0
3.75
5.2
95
2.4
4.25
6.8
108
3.0
4.50 (sw)
7.9
114
3.6
5.00
15.5
127
7.0
5.00
11.9
127
5.4
5.25 (sw)
15.0
133
6.8
5.50
17.8
140
8.1
5.50
17.8
140
8.1
5.50
17.8
140
8.1
6.50
27.1
165
12.3
6.50
22.0
165
10.0
6.50
25.7
165
11.7
7.75
47.6
197
21.6
9.00
99.0
229
44.9
10.00
133.0
254
60.3
C to TE
C to
SE
No. 35
Cross (sw)
Approx.
Weight
C to E
(Each)
inches
lb
mm
kg
2.25
0.9
57
0.4
2.25
1.3
57
0.6
2.75
2.1
70
1.0
2.75
2.5
70
1.1
3.25
3.8
83
1.7
3.75
6.1
95
2.8
No. 33
True Wye (sw)
C to LE
inches
mm
2.25
57
2.25
57
2.75
70
2.75
70
3.25
83
3.75
95
C to SE
inches
mm
2.00
51
2.25
57
2.50
64
2.75
70
2.75
70
3.00
76
Approx.
Weight
(Each)
lb
kg
0.7
0.3
1.1
0.5
1.5
0.7
1.8
0.8
2.5
1.1
4.3
2.0
—
—
—
—
—
4.25
108
4.50
114
10.5
4.8
11.5
5.2
4.25
108
4.50
114
3.25
83
3.50
89
6.1
2.8
9.6
4.4
—
—
—
—
—
5.00
127
5.25
133
15.8
7.2
18.5
8.4
5.00
127
3.75
95
9.8
4.4
—
—
—
—
—
—
—
—
—
—
—
—
—
5.50
140
20.0
9.1
5.50
140
4.00
102
15.0
6.8
—
—
—
—
—
6.50
165
6.50
165
7.75
197
9.00
229
10.00
254
28.0
12.7
28.0
12.7
48.0
21.8
121.5
55.1
110.0
49.9
—
—
—
6.50
165
7.75
197
9.00
229
10.00
254
4.50
114
6.00
152
6.50
155
7.00
178
22.3
10.1
36.0
16.3
69.9
31.7
80.0
36.3
6For
No. 29M
Tee with Threaded Branch
Approx.
Weight
C to GE
C to TE
(Each)
inches
inches
lb
mm
mm
kg
2.25
2.25 (sw)
0.6
57
57
0.3
2.25
2.25
1.0
57
57
0.5
2.75
2.75
1.5
70
70
0.7
2.75
2.75
2.0
70
70
0.9
3.25
4.25
3.0
83
108
1.4
3.75
3.75
4.3
95
95
2.0
3.75
3.75 (sw)
5.2
95
95
2.4
4.25
6.00
6.8
108
152
3.1
4.50
4.50 (sw)
7.9 114
114
3.6
5.00 (sw)
15.5
5.00
127
127
7.0
5.00
7.25
11.9
127
184
5.4
5.25
5.25 (sw)
15.0
133
133
6.8
5.50
5.50 (sw)
17.8
140
140
8.1
5.50
5.50 (sw)
17.8
140
140
8.1
5.50
5.50 (sw)
17.8
140
140
8.1
6.50
6.50 (sw)
27.1
165
165
12.3
6.50
6.50 (sw)
22.0
165
165
10.0
6.50
6.50 (sw)
25.7
165
165
11.7
7.75
7.75
47.6
197
197
21.6
9.00
9.00
99.0
229
229
44.9
10.00
10.00
133.0
254
254
60.3
14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this
size, contact your nearest Victaulic sales representative.
7Chinese
standard sizes
(s) = Carbon Steel Direct Roll Groove (OGS)
(sw) = Carbon Steel Segmentally Welded
NOTE
• All fittings are ductile iron unless otherwise noted with an (sw) or (s).
07.01 1449 Rev AB Updated 04/2016
victaulic.com
© 2016 Victaulic Company. All rights reserved.
8
victaulic.com
4.4 DIMENSIONS (Continued)
Tees, Crosses and True Wyes
C to E
C to LE
C to E
C to
GE
C
to
E
Size
Nominal
inches
DN
146
DN350
Actual
Outside
Dimeter
inches
mm
14.000
355.6
166
DN400
16.000
406.4
377.0
426.0
186
DN450
18.000
457.0
480.0
206
DN500
20.000
508.0
530.0
246
DN600
24.000
610.0
630.0
No. 20
Tee
Approx.
Weight
C to E
(Each)
inches
lb
mm
kg
11.00 (sw)
145.0
279
65.8
11.50
145.0
292
65.8
12.00 (sw)
186.0
305
84.4
13.00
186.0
300
84.4
15.50 (sw)
260.0
394
117.9
14.63
256.0
372
116.1
17.25 (sw)
336.0
438
152.4
15.38 (sw)
339.0
391
153.8
20.00 (sw)
592.0
508
268.5
17.38 (sw)
473.0
441
214.5
C to TE
C to
SE
No. 35
Cross (sw)
Approx.
Weight
C to E
(Each)
inches
lb
mm
kg
11.00
198.0
279
89.8
No. 33
True Wye (sw)
C to LE
inches
mm
11.00
279
C to SE
inches
mm
7.50
191
Approx.
Weight
(Each)
lb
kg
134.2
60.8
No. 29M
Tee with Threaded Branch
Approx.
Weight
C to GE
C to TE
(Each)
inches
inches
lb
mm
mm
kg
—
—
—
—
—
—
—
—
—
—
—
12.00
305
250.0
113.4
12.00
305
8.00
203
167.0
75.7
—
—
—
—
—
—
—
—
—
—
—
15.50
394
350.0
158.8
15.50
394
8.50
216
234.0
106.1
—
—
—
—
—
—
—
—
—
—
—
17.25
438
452.0
205.0
17.25
438
9.00
229
281.0
127.5
—
—
—
—
—
—
—
—
—
—
—
20.00
508
795.0
360.6
20.00
508
10.00
254
523.0
237.2
—
—
—
—
—
—
—
—
—
—
—
For AGS fitting information, see publication 20.05
14 – 60
DN350 –
DN1500
6For
14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this
size, contact your nearest Victaulic sales representative.
(s) = Carbon Steel Direct Roll Groove (OGS)
(sw) = Carbon Steel Segmentally Welded
NOTE
• All fittings are ductile iron unless otherwise noted with an (sw) or (s).
07.01 1449 Rev AB Updated 04/2016
victaulic.com
© 2016 Victaulic Company. All rights reserved.
9
victaulic.com
4.5 DIMENSIONS
Reducing Tee
No. 25
Size
1
DN25
1 1/4
DN32
1 1/2
DN40
2
DN50
2
DN50
x
x
2 1/2
2 1/2
x
x
3
DN80
3
DN80
x
x
3/4
DN20
1
DN25
3/4
DN20
1
DN25
1 1/4
DN32
3/4
DN20
1
DN25
1 1/4
DN32
1 1/2
DN40
3/4
DN20
1
DN25
1 1/4
DN32
1 1/2
DN40
2
DN50
3/4
DN20
1
DN25
1 1/4
DN32
1 1/2
DN40
2
DN50
2 1/2
No. 25
C
to
E
C
to
E
Size
No. 29T
No. 25
Std.
No. 29T
w/ Thd.
Branch
C to E
inches
mm
2.25 (sw)
57
2.75 (sw)
70
2.75 (sw)
70
2.75 (sw)
70
2.75 (sw)
70
3.25
83
3.25
83
3.25 (sw)
83
3.25
83
3.75 (sw)
95
3.75
95
3.75
95
3.75
95
3.75
95
4.25 (sw)
108
4.25
108
4.25
108
4.25
108
4.25
108
4.25
108
C to E
inches
mm
2.25 (sw)
57
2.75 (sw)
70
2.75 (sw)
70
2.75 (sw)
70
2.75 (sw)
70
3.25
83
3.25
83
3.25 (sw)
83
3.25 (sw)
83
3.75 (sw)
95
3.75 (sw)
95
3.75
95
3.75
95
3.75 (sw)
95
4.25 (sw)
108
4.25
108
4.25
108
4.25 (sw)
108
4.25 (sw)
108
4.25 (sw)
108
Approx.
Weight
(Each)
lb
kg
1.0
0.5
1.3
0.6
1.5
0.7
1.5
0.7
1.7
0.8
2.5
1.1
2.7
1.2
1.8
0.8
3.0
1.4
3.9
1.8
3.8
1.7
4.2
1.7
3.9
1.8
4.5
2.0
5.7
2.6
6.1
2.8
8.0
3.6
6.5
2.9
6.2
2.8
6.4
2.9
4
DN100
5
DN125
6
DN150
x
6
DN150
x
x
6 1/2
6 1/2
x
x
DN165.1
DN165.1
3/4
DN20
1
DN25
1 1/4
DN32
1 1/2
DN40
2
DN50
2 1/2
3
DN80
1
DN25
1 1/2
DN40
2
DN50
2 1/2
3
DN80
4
DN100
1
DN25
1 1/2
DN40
2
DN50
2 1/2
3
DN80
4
DN100
5
3
DN80
4
DN100
No. 29T
No. 25
Std.
No. 29T
w/ Thd.
Branch
C to E
inches
mm
5.00 (sw)
127
5.00
127
5.00 (sw)
127
5.00
127
5.00
127
5.00
127
5.00
127
5.50 (sw)
140
5.50 (sw)
140
5.50 (sw)
140
5.50
140
5.50
140
5.50
140
6.50 (sw)
165
6.50 (sw)
165
6.50
165
6.50
165
6.50
165
6.50
165
6.50
165
6.50
165
6.50
165
C to E
inches
mm
5.00 (sw)
127
5.00
127
5.00 (sw)
127
5.00
127
5.00
127
5.00
127
5.00
127
5.50 (sw)
140
5.50 (sw)
140
5.50 (sw)
140
5.50 (sw)
140
5.50 (sw)
140
5.50 (sw)
140
6.50 (sw)
165
6.50 (sw)
165
6.50
165
6.50
165
6.50
165
6.50
165
6.50
165
6.50 (sw)
165
6.50 (sw)
165
8For
Approx.
Weight
(Each)
lb
kg
8.0
3.6
7.8
3.5
9.6
4.4
10.2
4.6
11.2
5.1
11.4
5.2
11.6
5.3
14.0
6.4
14.3
6.5
14.5
6.6
15.2
6.9
16.6
7.5
16.7
7.6
23.0
10.4
24.0
10.9
21.6
9.8
21.4
11.7
26.5
12.0
25.0
11.3
23.2
10.5
24.0
10.9
25.0
11.3
14"/350 mm and larger roll grooved systems, Victaulic offers the
Advanced Groove System (AGS). For pricing and availability of cut groove
fittings in this size, contact your nearest Victaulic sales representative.
9Cast
fitting available. Contact Victaulic for details.
fitting available. Contact Victaulic for details.
(s) = Carbon Steel Direct Roll Groove (OGS)
(sw) = Carbon Steel Segmentally Welded
(s) = Carbon Steel Direct Roll Groove (OGS)
(sw) = Carbon Steel Segmentally Welded
victaulic.com
5
DN125
x
14"/350 mm and larger roll grooved systems, Victaulic offers the
Advanced Groove System (AGS). For pricing and availability of cut groove
fittings in this size, contact your nearest Victaulic sales representative.
07.01 1449 Rev AB Updated 04/2016
Nominal Size
inches
DN
4
x
x
DN100
8For
9Cast
C
to
E
C
to
E
C to E
C to E
Nominal Size
inches
DN
1
x
x
DN225
1 1/4
x
x
DN32
1 1/2
x
x
DN40
C to E
C to E
No. 25 Grooved Branch
No. 29T Threaded Branch
© 2016 Victaulic Company. All rights reserved.
10
victaulic.com
4.5 DIMENSIONS (Continued)
Reducing Tee
No. 25
Size
8
DN200
1 1/2
DN40
2
DN50
2 1/2
3
DN80
4
DN100
5
6
DN150
165.1
10
DN250
10
DN250
x
x
1 1/2
DN40
2
DN50
2 1/2
3
DN80
4
DN100
5
6
DN150
8
DN200
No. 25
C
to
E
C
to
E
No. 29T
w/ Thd.
Branch
C to E
inches
mm
7.75 (sw)
197
7.75 (sw)
197
7.75 (sw)
197
7.75 (sw)
197
7.75
197
7.75 (sw)
197
7.75
197
7.75 (sw)
197
9.00
229
9.00 (sw)
229
9.00 (sw)
229
9.00 (sw)
229
9.00 (sw)
229
9.00 (sw)
229
9.00 (sw)
229
9.00 (sw)
229
C to E
inches
mm
7.75 (sw)
197
7.75 (sw)
197
7.75 (sw)
197
7.75 (sw)
197
7.75
197
7.75 (sw)
197
7.75
197
7.75 (sw)
197
9.00
229
9.00 (sw)
229
9.00 (sw)
229
9.00 (sw)
229
9.00 (sw)
229
9.00 (sw)
229
9.00 (sw)
229
9.00 (sw)
229
Approx.
Weight
(Each)
lb
kg
33.0
15.0
33.5
15.2
39.0
17.7
33.6
15.2
41.8
19.0
34.0
15.4
42.3
19.2
48.0
21.8
62.0
28.1
62.0
28.1
62.4
28.3
60.0
27.2
61.0
27.7
52.0
23.6
59.0
26.8
64.7
29.3
12
DN300
x
168
DN400
x
14"/350 mm and larger roll grooved systems, Victaulic offers the
Advanced Groove System (AGS). For pricing and availability of cut groove
fittings in this size, contact your nearest Victaulic sales representative.
fitting available. Contact Victaulic for details.
1
DN25
2
DN50
2 1/2
3
DN80
4
DN100
5
14
DN350
x
16
DN400
x
8For
9Cast
Nominal Size
inches
DN
12
x
x
DN300
148
DN350
6
DN150
8
DN200
10
DN250
4
DN100
6
DN150
8
DN200
10
DN250
12
DN300
4
DN100
6
DN150
8
DN200
10
DN250
12
DN300
14
DN350
C to E
inches
mm
10.00 (sw)
254
10.00 (sw)
254
10.00 (sw)
254
10.00 (sw)
254
10.00 (sw)
254
10.00 (sw)
254
10.00 (sw)
254
10.00 (sw)
254
10.00 (sw)
254
11.00 (sw)
279
11.00 (sw)
279
11.00
279
11.00
279
11.00
279
12.00
305
12.00 (sw)
305
12.00
305
12.00
305
12.00
305
12.00 (sw)
305
C to E
inches
mm
10.00 (sw)
254
10.00 (sw)
254
10.00 (sw)
254
10.00 (sw)
254
10.00 (sw)
254
10.00 (sw)
254
10.00 (sw)
254
10.00 (sw)
254
10.00 (sw)
254
11.00 (sw)
279
11.00 (sw)
279
11.00
279
11.00
279
11.00
279
12.00
305
12.00 (sw)
305
12.00
305
12.00
305
12.00
305
—
Approx.
Weight
(Each)
lb
kg
77.0
34.9
80.0
36.3
78.0
35.4
82.0
37.2
80.0
36.3
75.0
34.0
75.0
34.0
80.0
36.3
84.0
38.1
102.0
46.3
108.2
49.1
112.0
50.8
120.0
54.4
129.1
58.6
130.0
59.0
133.5
60.6
145.0
65.8
149.5
67.8
154.0
69.9
167.0
75.8
14"/350 mm and larger roll grooved systems, Victaulic offers the
Advanced Groove System (AGS). For pricing and availability of cut groove
fittings in this size, contact your nearest Victaulic sales representative.
9Cast
fitting available. Contact Victaulic for details.
(s) = Carbon Steel Direct Roll Groove (OGS)
(sw) = Carbon Steel Segmentally Welded
victaulic.com
No. 29T
w/ Thd.
Branch
8For
(s) = Carbon Steel Direct Roll Groove (OGS)
(sw) = Carbon Steel Segmentally Welded
07.01 1449 Rev AB Updated 04/2016
No. 29T
No. 25
Std.
Size
No. 29T
No. 25
Std.
C
to
E
C
to
E
C to E
C to E
Nominal Size
inches
DN
8
x
x
DN200
C to E
C to E
No. 25 Grooved Branch
No. 29T Threaded Branch
© 2016 Victaulic Company. All rights reserved.
11
victaulic.com
4.5 DIMENSIONS (Continued)
Reducing Tee
No. 25
188
DN450
208
DN500
20
DN500
x
x
4
DN100
6
DN150
8
DN200
10
DN250
12
DN300
14
DN350
16
DN400
6
DN150
8
DN200
10
DN250
12
DN300
14
DN350
16
DN400
18
DN450
No. 29T
w/ Thd.
Branch
C to E
C to E
inches
inches
mm
mm
15.50 (sw) 15.50 (sw)
394
394
15.50 (sw) 15.50 (sw)
394
394
15.50 (sw) 15.50 (sw)
394
394
15.50
15.50
394
394
15.50
15.50
394
394
15.50
—
394
15.50
—
394
17.25
17.25
438
438
17.25
17.25
438
438
17.25
17.25
438
438
17.25
17.25
438
438
17.25
—
438
17.25
—
438
17.25
—
438
Approx.
Weight
(Each)
lb
kg
194.0
88.0
200.0
90.7
202.0
91.6
212.0
96.2
222.6
101.0
230.1
104.4
247.6
112.3
240.0
108.9
244.0
110.7
256.0
116.1
264.0
119.8
275.0
124.7
288.6
130.9
297.0
134.7
248
DN600
DN14 – 60
DN350 – 1500
No. 29T
w/ Thd.
Branch
Approx.
Weight
C to E
C to E
(Each)
inches
inches
lb
mm
mm
kg
20.00
20.00
340.0
508
508
154.2
20.00
20.00
343.9
508
508
156.0
20.00
20.00
352.8
508
508
160.0
20.00
360.0
—
508
163.3
20.00
378.0
—
508
171.5
20.00
380.0
—
508
172.4
20.00
373.0
—
508
169.2
For AGS fitting information, see
publication 20.05
14"/350 mm and larger roll grooved systems, Victaulic offers the
Advanced Groove System (AGS). For pricing and availability of cut groove
fittings in this size, contact your nearest Victaulic sales representative.
9Cast
fitting available. Contact Victaulic for details.
(s) = Carbon Steel Direct Roll Groove (OGS)
(sw) = Carbon Steel Segmentally Welded
NOTES
• No. 29T Threaded Outlet Reducing Tees are supplied NPT and are
available with British Standard threads. For British Standard specify
“BSP” clearly on order.
• All fittings are ductile iron unless otherwise noted with an (sw) or (s).
fitting available. Contact Victaulic for details.
(s) = Carbon Steel Direct Roll Groove (OGS)
(sw) = Carbon Steel Segmentally Welded
victaulic.com
8
DN200
10
DN250
12
DN300
149
DN350
16
DN400
189
DN450
20
DN500
No. 29T
8For
14"/350 mm and larger roll grooved systems, Victaulic offers the
Advanced Groove System (AGS). For pricing and availability of cut groove
fittings in this size, contact your nearest Victaulic sales representative.
07.01 1449 Rev AB Updated 04/2016
Nominal Size
inches
DN
24
x
x
DN600
8For
9Cast
No. 25
Std.
Size
No. 29T
No. 25
Std.
Size
No. 25
C
to
E
C
to
E
C
to
E
C
to
E
C to E
C to E
Nominal Size
inches
DN
18
x
x
DN450
C to E
C to E
No. 25 Grooved Branch
No. 29T Threaded Branch
© 2016 Victaulic Company. All rights reserved.
12
victaulic.com
4.6 DIMENSIONS
Bull Plug
No. 61
E to E
No. 61
No. 61
Bull Plug (s)
Size
Nominal
inches
DN
2
DN50
2 1/2
3
DN80
4
DN100
5
6
DN150
Actual
Outside
Diameter
inches
mm
2.375
60.3
2.875
73.0
3.500
88.9
4.500
114.3
5.563
141.3
6.625
168.5
E to E
inches
mm
4.00
102
5.00
127
6.00
152
7.00
178
8.00
203
10.00
254
Approx.
Weight
(Each)
lb
kg
2.5
1.1
3.0
1.4
4.5
2.0
7.5
3.4
12.0
5.4
17.0
7.7
(s) = Carbon Steel Direct Roll Groove (OGS)
(sw) = Carbon Steel Segmentally Welded
NOTES
• Steel dish caps available through 24”/600 mm, contact Victaulic.
• No. 61 Bull Plugs should be used in vacuum service with Style 72 or 750
couplings
• All fittings are ductile iron unless otherwise noted with an (sw) or (s).
07.01 1449 Rev AB Updated 04/2016
victaulic.com
© 2016 Victaulic Company. All rights reserved.
13
victaulic.com
4.7 DIMENSIONS
45º Lateral
No. 30
C
C to
SE
C
C to
SE
to
to
LE
C to
LE
LE
C to
LE
No. 30
No. 30
45° Lateral
Size
Nominal
inches
DN
3/4
DN20
1
DN25
11/4
DN32
11/2
DN40
2
DN50
21/2
DN65
3
DN80
31/2
DN90
4
DN100
5
Actual
Outside
Diameter
inches
mm
1.050
26.9
1.315
33.7
1.660
42.4
1.900
48.3
2.375
60.3
2.875
73.0
3.000
76.1
3.500
88.9
4.000
101.6
4.500
114.3
5.563
141.3
C to LE
inches
mm
4.50 (sw)
114
5.00 (sw)
127
5.75
146
6.25 (sw)
159
7.00 (sw)
178
7.75 (sw)
197
8.50 (sw)
216
8.50
216
10.00 (sw)
254
10.50
267
12.50 (sw)
318
C to SE
inches
mm
2.00 (sw)
51
2.25 (sw)
57
2.50
64
2.75 (sw)
70
2.75 (sw)
70
3.00 (sw)
76
3.25 (sw)
83
3.25
83
3.50 (sw)
89
3.75
95
4.00 (sw)
102
No. 30
Weight
No. 30
45° Lateral
Size
Approx.
(Each)
lb
kg
1.0
0.5
1.7
0.8
2.5 (d)
1.1
3.5
1.6
5.0
2.3
9.0
4.1
11.0
5.0
11.7 (d)
5.4
17.8
8.1
22.2 (d)
10.1
21.8
9.9
Nominal
inches
DN
6
DN150
8
DN200
10
DN250
12
DN300
1410
DN350
1610
DN400
1810
DN450
2010
DN500
2410
DN600
DN14 – 60
DN350 – 1500
10For
14"/350 mm and larger roll grooved systems, Victaulic offers the
Advanced Groove System (AGS). For pricing and availability of cut groove
fittings in this size, contact your nearest Victaulic sales representative.
Actual
Outside
Diameter
inches
mm
6.500
165.1
6.625
168.3
8.625
219.1
10.750
273.0
12.750
323.9
14.000
355.6
16.000
406.4
18.000
457.0
20.000
508.0
24.000
610.0
C to LE
inches
mm
14.00 (sw)
356
14.00 (sw)
356
18.00 (sw)
457
20.50 (sw)
521
23.00 (sw)
584
26.50 (sw)
673
29.00 (sw)
737
32.00 (sw)
813
35.00 (sw)
889
40.00 (sw)
1016
C to SE
inches
mm
4.50 (sw)
114
4.50 (sw)
114
6.00 (sw)
152
6.50 (sw)
165
7.00 (sw)
178
7.50 (sw)
191
8.00 (sw)
203
8.50 (sw)
216
9.00 (sw)
229
10.00 (sw)
254
Weight
Approx.
(Each)
lb
kg
43.6
19.8
43.6
49.8
72.0
32.7
105.0
47.6
165.0
74.8
276.0
125.2
344.2
156.1
429.0
194.6
500.0
226.8
715.0
324.3
For AGS fitting information, see publication 20.05
10For
14"/350 mm and larger roll grooved systems, Victaulic offers the
Advanced Groove System (AGS). For pricing and availability of cut groove
fittings in this size, contact your nearest Victaulic sales representative.
(s) = Carbon Steel Direct Roll Groove (OGS)
(sw) = Carbon Steel Segmentally Welded
(s) = Carbon Steel Direct Roll Groove (OGS)
(sw) = Carbon Steel Segmentally Welded
NOTE
• All fittings are ductile iron unless otherwise noted with an (sw) or (s).
07.01 1449 Rev AB Updated 04/2016
victaulic.com
© 2016 Victaulic Company. All rights reserved.
14
victaulic.com
4.8 DIMENSIONS
45º Reducing Lateral
No. 30-R
No. 30-R
Nominal Size
inches
DN
3
DN80
x
3
DN80
x
4
DN100
x
4
DN100
x
5
5
x
x
6
DN150
6
DN150
x
x
8
DN200
8
DN200
x
x
10
DN250
10
DN250
x
x
12
DN300
12
DN300
x
x
No. 30-R
No 30-R
45° Reducing Lateral
Approx.
Weight
C to LE
C to SE
(Each)
inches
inches
lb
mm
mm
kg
Size
2
DN50
21/2
DN65
2
DN50
21/2
DN65
3
DN80
2
DN50
3
DN80
4
DN100
3
DN80
4
DN100
5
4
DN100
5
6
DN150
4
DN100
5
6
DN150
8
DN200
5
6
DN150
8
DN200
10
DN250
8.50
216
8.50
216
10.50
267
10.50
267
10.50
267
12.50
318
12.50
318
12.50
318
14.00
356
14.00
356
14.00
356
18.00
457
18.00
457
18.00
457
20.50
521
20.50
521
20.50
521
20.50
521
23.00
584
23.00
584
23.00
584
23.00
584
3.25
83
3.25
83
3.75
95
3.75
95
3.75
95
4.00
102
4.00
102
4.00
102
4.50
114
4.50
114
4.50
114
6.00
152
6.00
152
6.00
152
6.50
165
6.50
165
6.50
165
6.50
165
7.00
178
7.00
178
7.00
178
7.00
178
to
C to
SE
C
C to
SE
C
to
LE
C to
LE
LE
C to
LE
No 30-R
45° Reducing Lateral
Approx.
Weight
C to LE
C to SE
(Each)
inches
inches
lb
mm
mm
kg
Size
Nominal Size
inches
DN
9.8
4.4
9.8
4.4
10.0
4.5
10.0
4.5
18.3
8.3
24.0
10.9
27.0
12.2
26.5
12.0
37.0
16.8
36.0
16.3
44.7
20.3
62.0
28.1
75.5
34.2
82.0
37.2
104.8
47.5
99.0
44.9
105.8
48.0
118.0
53.5
122.0
55.3
137.0
62.1
147.0
66.7
167.0
75.8
1411
DN350
x
14
DN350
x
16
DN400
x
18
DN450
x
20
DN500
x
24
DN600
x
1611
DN400
x
1811
DN450
x
2011
DN500
x
2411
DN600
x
14 – 60
DN350 – DN1500
11For
4
DN100
6
DN150
8
DN200
10
DN250
12
DN300
6
DN150
8
DN200
10
DN250
12
DN300
14
DN350
6
DN150
8
DN200
12
DN300
14
DN350
16
DN400
12
DN300
14
DN350
16
DN400
16
DN400
20
DN600
26.50
7.50
172.0
673
191
78.0
26.50
7.50
187.0
673
191
84.8
26.50
7.50
205.8
673
191
93.4
26.20
7.50
235.0
673
191
106.6
26.50
7.50
250.0
673
191
113.4
29.00
8.00
215.0
737
203
97.5
29.00
8.00
252.5
737
203
114.5
29.00
8.00
265.0
737
203
120.2
29.00
8.00
295.0
737
203
133.8
29.00
8.00
305.0
737
203
138.3
32.00
8.50
274.0
813
216
124.3
32.00
8.50
275.0
813
216
124.7
32.00
8.50
347.0
813
216
157.4
32.00
8.50
350.0
813
216
158.8
32.00
8.50
362.0
813
216
164.2
35.00
9.00
415.0
889
229
188.2
35.00
9.00
420.0
889
229
190.5
35.00
10.00
425.0
899
229
192.8
40.00
10.00
425.0
1016
254
192.8
40.00
10.00
570.0
1016
254
258.6
For AGS fitting information,
see publication 20.05
14"/350 mm and larger roll grooved systems, Victaulic offers the
Advanced Groove System (AGS). For pricing and availability of cut groove
fittings in this size, contact your nearest Victaulic sales representative.
07.01 1449 Rev AB Updated 04/2016
victaulic.com
© 2016 Victaulic Company. All rights reserved.
15
victaulic.com
4.9 DIMENSIONS
4.10 DIMENSIONS
Tee Wye
Adapter Nipple
No. 32
No. 4012 Grv. × Thd.
No. 42 Grv. × Bev.
No. 43 Grv. × Grv.
H
E2
G
E1
No. 32
2
DN50
21/2
3
DN80
31/2
DN90
4
100
5
6
DN150
8
DN200
10
DN250
12
DN300
Nominal Size
inches
DN
2
x
x
DN50
21/2
x
x
x
x
x
x
x
x
x
x
3
DN80
31/2
DN90
4
DN100
5
6
DN150
8
DN200
10
DN250
12
DN300
x
x
x
x
x
x
x
x
2
DN50
21/2
3
DN80
31/2
DN90
4
DN100
5
6
DN150
8
DN200
10
DN250
12
DN300
G
inches
mm
2.75
70
3.00
76
3.25
83
3.25
89
3.75
95
4.00
102
4.50
114
6.00
152
6.50
165
7.00
178
H
inches
mm
7.00
178
7.75
197
8.50
216
10.00
254
10.50
267
12.50
318
14.00
356
18.00
457
20.50
521
23.00
584
E1
inches
mm
9.00
229
10.50
267
11.50
292
13.00
330
13.63
346
16.13
410
18.25
464
23.25
591
27.25
692
31.00
787
E to E
E to E
No. 40
No.42
No.43
Size
No. 32
Tee Wye (sw)
Size
E to E
E2
inches
mm
4.63
118
5.75
146
6.50
165
7.75
197
8.13
207
10.00
254
11.50
292
15.25
387
18.00
457
20.50
521
Nominal Size
inches
DN
3/4
DN20
1
25
11/4
DN32
11/2
40
2
DN50
21/2
Approx.
Weight
(Each)
lb
kg
6.4
2.9
11.5
5.2
14.3
6.5
22.9
10.4
26.0
11.8
48.0
21.8
60.5
27.4
127.1
57.7
190.0
86.2
240.0
108.9
3
DN80
31/2
DN90
4
DN100
5
6
DN150
8
DN200
10
DN250
12
DN300
(s) = Carbon Steel Direct Roll Groove (OGS)
(sw) = Carbon Steel Segmentally Welded
12Available
Actual Outside
Diameter
inches
mm
1.050
26.9
1.315
33.7
1.660
42.4
1.900
48.3
2.375
60.3
2.875
73.0
3.500
88.9
4.000
101.6
4.500
114.3
5.563
141.3
6.625
168.3
8.625
219.1
10.750
273.0
12.750
323.9
No. 40, 42, 43
Adapter Nipple (s)
Approx.
Weight
E to E
(Each)
inches
inches
mm
mm
3.00
0.3
76
0.1
3.00
0.4
76
0.2
4.00
0.8
102
0.4
4.00
0.9
102
0.4
4.00
1.2
102
0.5
4.00
1.9
102
0.9
4.00
2.5
102
1.1
4.00
2.1
102
0.9
6.00
5.5
152
2.5
6.00
7.4
152
3.4
6.00
9.5
152
4.3
6.00
14.2
152
6.4
8.00
27.0
203
12.2
8.00
33.0
203
15.0
with British Standard Pipe Threads, specify “BSP” clearly on
order.
(s) = Carbon Steel Direct Roll Groove (OGS)
(sw) = Carbon Steel Segmentally Welded
NOTES
• All fittings are ductile iron unless otherwise noted with an (sw) or (s).
• For pump package nipples with 1 ½"/40 mm hole cut to receive Style 923
Vic-Let or Style 924 Vic-O-Well® request special No. 40, 42 or 43 nipples
and specify No. 40-H, 42-H or 43-H on order. NOTE: 4 – 12"/100 – 300 mm
diameter — 8"/200 mm minimum length required.
• For roll grooved systems, Victaulic offers the Advanced Groove System
(AGS). For pricing and availability of cut groove fittings in this size, contact
your nearest Victaulic sales representative.
07.01 1449 Rev AB Updated 04/2016
victaulic.com
© 2016 Victaulic Company. All rights reserved.
16
victaulic.com
4.11 DIMENSIONS
Cap
No. 60
T
T
No. 60
No. 60
Cap
Size
Nominal
inches
DN
3/4
DN20
1
25
11/4
DN32
11/2
DN40
2
DN50
21/2
76.1 mm
3
DN80
31/2
DN90
4
DN100
DN125
5
No. 60
Actual
Outside
Diameter
inches
mm
1.050
26.9
1.315
33.7
1.660
42.4
1.900
48.3
2.375
60.3
2.875
73.0
3.000
76.1
3.500
88.9
4.000
101.6
4.250
108.0
4.500
114.3
5.250
133.0
5.500
139.7
5.563
141.3
“T” Thickness
inches
mm
0.88
22
0.88
22
0.88
22
0.88
22
0.88
22
0.88
22
0.88
22
0.88
22
0.88
22
1.00
25
1.00
25
1.00
25
1.00
25
1.00
25
Size
Approx.
Weight
(Each)
lb
kg
0.2
0.1
0.3
0.1
0.3
0.1
0.5
0.2
0.6
0.3
1.0
0.5
1.2
0.5
1.2
0.5
2.5
1.1
2.3
1.0
2.5
1.1
4.5
2.0
4.5
2.0
4.6
2.1
Nominal
inches
DN
6
DN150
8
200
10
DN250
12
DN300
1413
DN350
1613
DN400
1813
DN450
2013
DN500
2413
DN600
14 – 60
DN350 – DN1500
No. 60
Cap
Actual
Approx.
Outside
Weight
Diameter
“T” Thickness
(Each)
inches
inches
lb
mm
mm
kg
6.250
1.00
6.8
159.0
25
3.1
6.500
1.00
7.3
165.1
25
3.3
6.625
1.00
6.1
168.3
25
2.8
8.625
1.19
13.1
219.1
30
5.9
10.750
1.25
21.0
273.0
32
9.5
12.750
1.25
35.6
323.9
32
16.2
14.000
9.50 (s)
+
355.6
241
16.000
10.00 (s)
+
406.4
254
18.000
11.00 (s)
+
457.0
279
20.000
12.00 (s)
+
508.0
305
24.000
13.50 (s)
+
610.0
343
For AGS fitting information, see publication 20.05
13For
14"/350 mm and larger roll grooved systems, Victaulic offers the
Advanced Groove System (AGS). For pricing and availability of cut groove
fittings in this size, contact your nearest Victaulic sales representative.
13For
14"/350 mm and larger roll grooved systems, Victaulic offers the
Advanced Groove System (AGS). For pricing and availability of cut groove
fittings in this size, contact your nearest Victaulic sales representative.
(s) = Carbon Steel Direct Roll Groove (OGS)
(sw) = Carbon Steel Segmentally Welded
+ Contact Victaulic for details.
(s) = Carbon Steel Direct Roll Groove (OGS)
(sw) = Carbon Steel Segmentally Welded
NOTES
• No. 60 cap is not suitable for use in vacuum service with Style 72 or 750
couplings. No. 61 bull plugs should be used.
+ Contact Victaulic for details.
• All fittings are ductile iron unless otherwise noted with an (sw) or (s).
07.01 1449 Rev AB Updated 04/2016
victaulic.com
© 2016 Victaulic Company. All rights reserved.
17
victaulic.com
4.12 DIMENSIONS
Flanged Adapter Nipple
No.
No.
No.
No.
No.
No.
41 ANSI Class 125
45F ANSI Class 150 Flat Face
45R ANSI Class 150 Raised Face
46F ANSI Class 300 Flat Face
46R ANSI Class 300 Raised Face
45RE PN10/PN16 Raised Face
E to E
E to E
E to E
E to E
E to E
E to E
No. 41
No. 45F
No. 45R
No. 46F
No. 46R
No. 45RE
Size
Nominal
inches
DN
3/4
DN20
1
DN25
11/4
DN32
11/2
DN40
2
DN50
21/2
DN65
3
DN80
31/2
DN90
4
DN100
5
DN125
6
DN150
8
DN200
10
DN 250
12
DN300
1414
DN350
1614
DN400
1814
DN450
Actual
Outside
Diameter
inches
mm
1.050
26.9
1.315
33.7
1.660
42.4
1.900
48.3
2.375
60.3
2.875
73.0
3.000
76.1
3.500
88.9
4.000
101.6
4.500
114.3
5.563
141.3
5.000
139.7
6.625
168.3
6.500
165.1
8.625
219.1
10.750
273.0
12.750
323.9
14.000
355.6
16.000
406.4
18.000
457.0
No. 41
ANSI 125
Flange Adapter Nipple
Approx.
Weight
E to E
(Each)
inches
lb
mm
kg
3.00
—
76
3.00
2.5
76
1.1
4.00
3.0
102
1.4
4.00
3.5
102
1.6
4.00
5.5
102
2.5
4.00
8.0
102
3.6
No. 45F and No. 45R
ANSI 150
Flanged Adapter Nipple (s)
Approx.
Weight
E to E
(Each)
inches
lb
mm
kg
3.00
2.3
76
1.0
3.00
2.7
76
1.2
4.00
3.3
102
1.5
4.00
3.9
102
1.8
4.00
6.0
102
2.7
4.00
9.9
102
4.5
No. 46F and No. 46R
ANSI 300
Flanged Adapter Nipple (s)
Approx.
Weight
E to E
(Each)
inches
lb
mm
kg
3.00
3.3
76
1.5
3.00
3.9
76
1.8
4.00
4.8
102
2.2
4.00
6.9
102
3.1
4.00
8.2
102
3.7
4.00
11.9
102
5.4
—
—
—
—
—
—
4.00
102
4.00
102
6.00
152
6.00
152
9.5
4.3
12.0
5.4
16.7
7.6
21.5
9.8
4.00
102
4.00
102
6.00
152
6.00
152
11.7
5.3
15.1
6.8
18.5
8.4
21.3
9.7
4.00
102
4.00
102
6.00
152
6.00
152
16.5
7.5
20.1
9.1
27.4
12.4
35.3
16.0
No. 45RE
Flanged Adapter Nipple
Approx.
Weight
E to E
(Each)
inches
lb
mm
kg
—
—
—
—
—
—
—
—
2.50
64
5.3
2.4
—
—
2.50
64
2.50
64
6.5
2.9
8.2
3.7
—
—
2.75
70
10.0
45
—
—
16.3
7.4
16.3
7.4
—
—
—
—
—
—
6.00
152
26.5
12.0
6.00
152
27.5
12.5
6.00
152
47.5
21.5
2.75
70
2.75
70
—
—
—
—
—
—
—
—
+
—
—
+
—
—
+
—
—
—
—
—
—
—
—
6.00
152
8.00
203
8.00
203
8.00
203
8.00
203
8.00
203
39.0
17.7
57.0
25.9
41.0
18.6
6.00
152
8.00
203
8.00
203
8.00
203
8.00
203
8.00
203
41.3
18.8
59.3
27.1
40.0
40.0
6.00
152
8.00
203
8.00
203
8.00
203
8.00
203
8.00
203
70.3
31.9
100.8
45.7
146.2
66.3
—
—
—
+
+
+
14For
14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this
size, contact your nearest Victaulic sales representative.
(s) = Carbon Steel Direct Roll Groove (OGS)
(sw) = Carbon Steel Segmentally Welded
07.01 1449 Rev AB Updated 04/2016
victaulic.com
© 2016 Victaulic Company. All rights reserved.
18
victaulic.com
4.12 DIMENSIONS (Continued)
Flanged Adapter Nipple
No.
No.
No.
No.
No.
No.
41 ANSI Class 125
45F ANSI Class 150 Flat Face
45R ANSI Class 150 Raised Face
46F ANSI Class 300 Flat Face
46R ANSI Class 300 Raised Face
45RE PN10/PN16 Raised Face
E to E
E to E
E to E
E to E
E to E
E to E
No. 41
No. 45F
No. 45R
No. 46F
No. 46R
No. 45RE
Size
Nominal
inches
DN
2014
DN500
2414
DN600
Actual
Outside
Diameter
inches
mm
20.000
508.0
24.000
610.0
14 – 60
DN350 – DN1500
No. 41
No. 45F and No. 45R
No. 46F and No. 46R
ANSI 125
ANSI 150
ANSI 300
No. 45RE
Flange Adapter Nipple
Flanged Adapter Nipple (s) Flanged Adapter Nipple (s) Flanged Adapter Nipple (s)
Approx.
Approx.
Approx.
Approx.
Weight
Weight
Weight
Weight
E to E
(Each)
E to E
(Each)
E to E
(Each)
E to E
(Each)
inches
lb
inches
lb
inches
lb
inches
lb
mm
kg
mm
kg
mm
kg
mm
kg
8.00
8.00
8.00
—
+
+
—
—
203
203
203
8.00
8.00
8.00
—
+
+
—
—
203
203
203
For AGS fitting information, see publication 20.05
14For
14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this
size, contact your nearest Victaulic sales representative.
(s) = Carbon Steel Direct Roll Groove (OGS)
(sw) = Carbon Steel Segmentally Welded
+ Contact Victaulic for details
NOTE
• All fittings are ductile iron unless otherwise noted with an (sw) or (s).
07.01 1449 Rev AB Updated 04/2016
victaulic.com
© 2016 Victaulic Company. All rights reserved.
19
victaulic.com
4.13 DIMENSIONS
Swaged Nipple
No. 53 Grv. × Grv.
No. 54 Grv. × Thd.
No. 55 Thd. × Grv.
E to E
E to E
E to E
E to E
E to E
E to E
No. 53
No. 54
No. 55
No. 53
No. 54
No. 55
Size
Nominal Sizes
inches
DN
2
DN50
x
21/2
x
3
DN80
x
31/2
DN90
4
DN100
x
x
1
DN25
11/4
DN32
11/2
DN40
1
DN25
11/4
DN32
11/2
DN40
2
DN50
1
DN25
11/4
DN32
11/2
DN40
2
DN50
21/2
3
DN80
1
DN25
11/4
DN32
11/2
DN40
2
DN50
21/2
3
DN80
31/2
DN90
07.01 1449 Rev AB Updated 04/2016
victaulic.com
No. 53, 54, and 55 Swaged
Nipples (s)
Approx.
Weight
E to E
(Each)
inches
lb
mm
kg
6.50
2.0
165
0.9
6.50
2.0
165
0.9
6.50
2.0
165
0.9
7.00
3.0
178
1.4
7.00
3.0
178
1.4
7.00
3.0
178
1.4
7.00
3.0
178
1.4
8.00
4.5
203
2.0
8.00
4.5
203
2.0
8.00
4.5
203
2.0
8.00
4.5
203
2.0
8.00
4.5
203
2.0
8.00
6.8
203
3.1
9.00
7.5
229
3.4
9.00
7.5
229
3.4
9.00
7.5
229
3.4
9.00
7.5
229
3.4
9.00
7.5
229
3.4
9.00
7.5
229
3.4
9.00
7.5
229
3.4
Size
Nominal Sizes
inches
DN
5
x
6
DN150
x
3
DN80
31/2
DN90
4
DN100
41/2
DN120
5
8
DN200
2
DN50
3
DN80
4
DN100
1
DN25
11/4
DN32
11/2
DN40
2
DN50
21/2
x
6
DN150
No. 53, 54, and 55 Swaged
Nipples (s)
Approx.
Weight
E to E
(Each)
inches
lb
mm
kg
11.00
11.5
279
5.2
11.00
11.3
279
5.1
11.00
11.5
279
5.2
12.00
17.0
305
7.7
12.00
17.0
305
7.7
12.00
17.2
305
7.8
12.00
17.4
305
7.9
12.00
17.4
305
7.9
12.00
17.4
305
7.9
12.00
17.4
305
7.9
12.00
17.5
305
7.9
12.00
17.5
305
7.9
12.00
17.5
305
7.9
20.0
+
9.1
(s) = Carbon Steel Direct Roll Groove (OGS)
(sw) = Carbon Steel Segmentally Welded
+ Contact Victaulic for details
NOTE
• All fittings are ductile iron unless otherwise noted with an (sw) or (s).
© 2016 Victaulic Company. All rights reserved.
20
victaulic.com
4.14 DIMENSIONS
4.15 DIMENSIONS
Female Threaded Adapter
Hose Nipple
No. 80
No. 48
E to E
E to E
No. 48
No. 80
Size
Size
Nominal
inches
DN
3/4
DN20
1
DN25
11/4
DN32
11/2
DN40
2
DN50
21/2
3
DN80
4
DN100
No. 80 Female Threaded Adapter
Actual
Outside
Diameter
inches
mm
1.050
26.9
1.315
33.7
1.660
42.4
1.900
48.3
2.375
60.3
2.875
73.0
3.500
88.9
4.500
114.3
E to E
inches
mm
2.00
51
2.06
52
2.31 (sw)
59
2.31 (sw)
59
2.50
64
2.75
70
2.75
70
3.25
83
Approx.
Weight
(Each)
lb
kg
1.0
0.5
1.0
0.5
1.5
0.7
1.5
0.7
1.4
0.6
1.5
0.7
2.9
1.3
4.5
2.0
Nominal Size
inches
DN
3/4
DN20
1
DN25
11/4
DN32
11/2
DN40
2
DN50
21/2
3
DN80
4
DN100
5
(s) = Carbon Steel Direct Roll Groove (OGS)
6
DN150
8
DN200
10
DN250
12
DN300
(sw) = Carbon Steel Segmentally Welded
NOTES
• Available with British Standard Pipe Threads, specify “BSP” clearly on
order.
• All fittings are ductile iron unless otherwise noted with an (sw) or (s).
Actual Outside
Diameter
inches
mm
1.050
26.9
1.315
33.7
1.660
42.4
1.900
48.3
2.375
60.3
2.875
73.0
3.500
88.9
4.500
114.3
5.563
141.3
6.625
168.3
8.625
219.1
10.750
273.0
12.750
323.9
No. 48 Hose Nipple (s)
E to E
inches
mm
3.12
79
3.38
86
3.88
98
3.88
98
4.50
114
5.38
137
5.75
146
7.00
178
8.75
222
10.13
257
11.88
302
12.50
318
14.50
368
Approx.
Weight
(Each)
lb
kg
0.3
0.1
0.4
0.2
0.6
0.3
0.8
0.4
1.1
0.5
2.0
0.9
3.2
1.5
4.9
2.2
8.0
3.6
14.3
6.5
24.7
11.2
40.1
18.2
62.0
28.1
(s) = Carbon Steel Direct Roll Groove (OGS)
(sw) = Carbon Steel Segmentally Welded
NOTE
• All fittings are ductile iron unless otherwise noted with an (sw) or (s).
07.01 1449 Rev AB Updated 04/2016
victaulic.com
© 2016 Victaulic Company. All rights reserved.
21
victaulic.com
4.16 DIMENSIONS
Concentric/Eccentric Reducer
No. 50 Concentric
No. 51 Eccentric
E
to E
No. 50
Size
Nominal
inches
DN
3/4
11/4
x
DN20
DN32
1
DN25
3/4
11/2
x
DN20
DN40
1
DN25
11/4
DN32
3/4
2
x
DN20
DN50
1
DN25
11/4
DN32
11/2
DN40
3/4
21/2
x
DN20
1
DN25
11/4
DN32
11/2
DN40
2
DN50
3/4
3
x
DN20
DN80
1
DN25
11/4
DN32
11/2
DN40
2
DN50
21/2
DN76.1
31/2
x
DN90
4
x
DN100
3
DN80
1
DN25
E to E
E to E
E till E
No. 51
Fabricated Steel
No. 50
Fabricated Steel
No. 51
No. 50 Concentric
Reducer
Approx.
Weight
E to E
(Each)
inches
lb
mm
kg
1.9
+
0.9
1.9
+
0.9
1.4
+
0.6
2.50
0.8
64
0.4
2.50
1.0
64
0.5
2.50
0.9
64
0.3
2.50
0.7
64
0.3
2.50
1.2
64
0.5
3.50
1.0
89
0.5
1.3
+
0.6
2.50
1.1
64
0.5
3.50
3.3
89
1.5
2.50
3.6
64
1.6
2.50
3.9
64
1.8
1.5
+
0.7
2.50
1.3
64
0.6
2.50
1.4
64
0.6
2.50
5.1
64
2.3
2.50
1.6
64
0.7
2.50
1.8
64
0.8
2.50
2.1
64
1.0
2.50
2.0
64
0.9
3.00
3.0
76
1.4
07.01 1449 Rev AB Updated 04/2016
victaulic.com
E
to E
No. 50
No. 51
Eccentric Reducer
Approx.
Weight
E to E
(Each)
inches
lb
mm
kg
—
—
—
—
—
—
8.50 (sw)
216
4.5
2.0
—
—
9.00 (sw)
229
9.00 (sw)
229
9.00 (sw)
229
3.50
89
9.50 (sw)
241
3.50
89
3.50
89
2.0
0.9
2.3
1.0
4.6
2.1
1.1
0.5
3.3
1.5
3.5
1.6
1.4
0.6
3.7
1.7
4.3
2.0
4.5
2.0
4.8
2.2
4.8
2.2
5.1
2.3
6.0
2.7
7.0
3.2
—
—
9.50 (sw)
241
13.00 (sw)
330
7.0
3.2
6.5
2.9
+
9.50
241
3.50
89
9.50 (sw)
241
3.50
89
+
9.50 (sw)
241
+
Size
Nominal
inches
DN
11/4
DN32
11/2
DN40
2
DN50
21/2
3
DN80
31/2
DN90
2
x
DN50
21/2
5
3
DN80
4
DN100
1
6
x
DN25
DN150
11/2
DN40
2
DN50
2 1/2
8
x
DN200
3
DN80
4
DN100
5
21/2
3
DN80
4
DN100
5
6
DN150
15For
E to E
E to E
E till E
No. 51
Fabricated Steel
No. 50
Fabricated Steel
No. 51
No. 50 Concentric
Reducer
Approx.
Weight
E to E
(Each)
inches
lb
mm
kg
4.6
+
2.1
3.00 (sw)
2.6
76
1.2
3.00
2.4
76
1.1
3.00
2.7
76
1.2
3.00
3.2
76
1.4
3.00
2.9
76
1.3
11.00 (sw)
9.0
279
4.1
4.00
4.3
102
2.0
4.00
5.5
102
2.5
3.50
4.3
89
1.9
4.00
5.0
102
2.3
5.5
+
2.5
4.00
6.6
102
3.0
4.00
6.4
102
2.9
4.00
6.4
102
2.9
4.00
6.5
102
2.9
4.00
6.4
102
2.9
16.00
7.9
406
3.6
5.00
9.3
127
4.2
5.00
10.4
127
4.8
5.00
11.6
127
5.2
5.00
11.9
127
5.4
No. 51
Eccentric Reducer
Approx.
Weight
E to E
(Each)
inches
lb
mm
kg
—
—
10.00 (sw)
254
4.00
102
4.00
102
4.00
102
10.00 (sw)
254
11.00 (sw)
279
11.00 (sw)
279
11.00 (sw)
279
5.00
127
11.50 (sw)
292
8.1
3.7
3.3
1.5
3.4
1.5
3.5
1.6
8.0
3.6
5.2
2.4
10.8
4.9
11.1
5.0
12.0
5.4
14.5
6.6
+
+
11.50 (sw)
292
11.50 (sw)
292
5.50
140
5.50
140
5.50
140
12.00 (sw)
305
12.00 (sw)
305
12.00 (sw)
305
12.00 (sw)
305
6.00
152
14.5
6.6
14.2
6.4
15.0
6.8
17.0
7.7
17.0
7.7
26.1
11.8
22.0
10.0
23.0
10.4
23.0
10.4
24.0
10.9
14"/350 mm and larger roll grooved systems, Victaulic offers the
Advanced Groove System (AGS). For pricing and availability of cut groove
fittings in this size, contact your nearest Victaulic sales representative.
© 2016 Victaulic Company. All rights reserved.
22
victaulic.com
4.16 DIMENSIONS (Continued)
Concentric/Eccentric Reducer
No. 50 Concentric
No. 51 Eccentric
E
to E
No. 50
Size
Nominal
inches
DN
4
10
x
DN100
DN250
5
12
x
DN300
14
x
DN350
16
x
DN400
18
x
DN450
6
DN150
8
DN200
4
DN100
6
DN150
8
DN200
10
DN250
6
DN150
8
DN200
10
DN250
12
DN300
8
DN200
10
DN250
12
DN300
14
DN350
10
DN250
12
DN300
14
DN350
16
DN400
E to E
E to E
E till E
No. 51
Fabricated Steel
No. 50
Fabricated Steel
No. 51
No. 50 Concentric
Reducer
Approx.
Weight
E to E
(Each)
inches
lb
mm
kg
6.00
19.7
152
8.9
33.0
+
15.0
6.00
20.0
152
9.1
6.00
22.0
152
10.0
44.0
+
20.0
7.00
24.6
178
11.2
7.00
52.0
178
23.6
7.00
39.0
178
17.7
13.00
65.0
330
29.5
13.00
65.0
330
29.5
13.00
66.0
330
29.9
13.00
68.0
330
30.8
14.00
73.0
356
33.1
14.00
73.0
356
33.1
14.00
73.0
356
33.1
14.00
73.0
356
33.1
15.00
91.0
381
41.3
15.00
91.0
381
41.3
15.00
91.0
381
41.3
15.00
91.0
381
41.3
E
to E
No. 50
No. 51
Eccentric Reducer
Approx.
Weight
E to E
(Each)
inches
lb
mm
kg
13.00 (sw)
32.0
330
14.5
34.6
+
15.7
13.00 (sw)
36.9
330
16.7
7.00
21.6
178
9.8
14.00 (sw)
48.0
356
21.8
14.00 (sw)
50.0
356
22.7
14.00 (sw)
53.5
356
24.3
14.00 (sw)
57.0
356
25.9
13.00
60.0
330
27.2
13.00
60.0
330
27.2
13.00
65.0
330
29.5
13.00
66.0
330
29.9
14.00
73.0
355
33.1
14.00
73.0
355
33.1
14.00
73.0
355
33.1
14.00
73.0
355
33.1
15.00
91.0
381
41.3
15.00
91.0
381
41.3
15.00
91.0
381
41.3
15.00
91.0
381
41.3
Size
Nominal
inches
DN
10
20
x
DN250
DN500
12
DN300
14
DN350
16
DN400
18
DN450
10
24
x
DN250
DN600
12
DN300
14
DN350
16
DN400
18
DN450
20
DN500
14 – 6015
DN350 – DN1500
E till E
No. 51
Fabricated Steel
No. 50
Fabricated Steel
No. 51
No. 50 Concentric
Reducer
Approx.
Weight
E to E
(Each)
inches
lb
mm
kg
20.00
110.0
508
49.9
20.00
120.0
508
54.4
20.00
149.0
508
67.9
20.00
120.0
508
54.4
20.00
136.0
508
61.7
20.00
142.0
508
64.4
20.00
150.0
508
68.0
20.00
162.0
508
73.5
20.00
162.0
508
73.5
20.00
162.0
508
73.5
20.00
151.0
508
68.5
No. 51
Eccentric Reducer
Approx.
Weight
E to E
(Each)
inches
lb
mm
kg
20.00
177.0
508
80.3
20.00
120.0
508
54.4
20.00
149.0
508
67.9
20.00
120.0
508
54.4
20.00
136.0
508
61.7
20.00
142.0
508
64.4
20.00
150.0
508
68.0
20.00
162.0
508
73.5
20.00
162.0
508
73.5
20.00
162.0
508
73.5
20.00
190.0
508
86.2
For AGS fitting information, see publication 20.05
14"/350 mm and larger roll grooved systems, Victaulic offers the
Advanced Groove System (AGS). For pricing and availability of cut groove
fittings in this size, contact your nearest Victaulic sales representative.
(s) = Carbon Steel Direct Roll Groove (OGS)
(sw) = Carbon Steel Segmentally Welded
+ Contact Victaulic for details.
NOTES
• Available with male threaded small end No. 52.
• Cast fitting available for JIS size. Contact Victaulic for details.
• Steel eccentric reducers available through 30”/750 mm, contact Victaulic
for dimensions.
• All fittings are ductile iron unless otherwise noted with an (sw) or (s).
14"/350 mm and larger roll grooved systems, Victaulic offers the
Advanced Groove System (AGS). For pricing and availability of cut groove
fittings in this size, contact your nearest Victaulic sales representative.
victaulic.com
E to E
15For
15For
07.01 1449 Rev AB Updated 04/2016
E to E
© 2016 Victaulic Company. All rights reserved.
23
victaulic.com
4.17 DIMENSIONS
Small Threaded Reducer
No. 52
No. 52F
Size
Nominal Size
inches
DN
1
11/2
x
DN25
DN40
11/4
DN32
3/4
2
x
DN20
DN50
1
DN25
1 1/4
DN32
1 1/2
DN40
1
21/2
x
DN25
11/4
DN32
11/2
DN40
2
DN50
1 1/2
DN65 x
DN40
2
DN50
3/4
3
x
DN20
DN80
1
DN25
1 1/4
DN32
1 1/2
DN40
2
DN50
2 1/2
E
to E
E
to E
E
to E
E
to E
No. 52
No 52F
No. 52
No 52F
No. 52F Concentric
No. 52
Reducer with BSPT
Small Threader Reducer Female Threaded End
Approx.
Approx.
Weight
Weight
E to E
(Each)
E to E
(Each)
inches
lb
mm
kg
mm
kg
2.50
0.8
—
—
64
0.4
2.50
0.9
—
—
64
0.4
2.50
0.9
—
—
64
0.4
2.50
0.7
—
—
64
0.3
2.50
1.2
—
—
64
0.5
2.50
1.0
—
—
64
0.5
2.50
1.1
—
—
64
0.5
2.50 (sw)
1.2
—
—
64
0.5
2.50 (sw)
1.3
—
—
64
0.6
2.50
1.4
—
—
64
0.6
Size
Nominal Size
inches
DN
1
4
x
DN25
DN100
11/2
DN40
2
DN50
2 1/2
3
DN80
No. 52F Concentric
No. 52
Reducer with BSPT
Small Threader Reducer Female Threaded End
Approx.
Approx.
Weight
Weight
E to E
(Each)
E to E
(Each)
inches
lb
mm
kg
mm
kg
3.00
2.3
—
—
76
1.0
3.00
2.7
—
—
76
1.2
3.00
2.6
—
—
76
1.2
3.00
2.6
—
—
76
1.2
3.00
2.5
—
—
76
1.1
108.0mm x 42.4mm
76
1.3
76
1.3
48.3mm
76
1.3
76
1.4
60mm
—
—
76
1.4
114.3mm x 42.4mm
76
1.3
76
1.3
48.3mm
76
1.3
76
1.3
60mm
76
1.3
76
1.4
4
DN100
+
4.5
2.0
—
—
64
0.8
64
0.8
—
—
64
0.9
—
—
133.0mm x 60mm
—
—
114
2.2
—
—
139.0mm x 60mm
—
—
114
2.3
—
—
—
—
—
—
—
—
—
—
—
—
5.5
2.5
5.7
2.6
5.8
2.6
5.8
2.6
6.5
2.9
2.0
0.9
—
—
4.00
102
4.00
102
4.00
102
4.00
102
—
—
—
—
—
—
2.50
64
2.50
64
2.50 (sw)
64
2.50
64
2.50
64
1.5
0.7
1.3
0.6
1.5
0.7
1.5
0.7
1.5
0.7
2.4
1.1
88.9mm x 42.4mm
64
0.9
64
0.8
48.3mm
64
0.9
64
0.9
60mm
—
—
64
0.9
+ (sw)
5
x
6
DN150
x
1
DN25
2
DN50
21/2
3
DN80
4
100
5
+ (sw)
+ (sw)
159.0mm x 42.4mm
114
2.2
144
2.5
48.3mm
114
2.2
114
2.5
60mm
—
—
114
2.6
(s) = Carbon Steel Direct Roll Groove (OGS)
(sw) = Carbon Steel Segmentally Welded
+ Contact Victaulic for details.
07.01 1449 Rev AB Updated 04/2016
victaulic.com
© 2016 Victaulic Company. All rights reserved.
24
victaulic.com
4.17 DIMENSIONS (Continued)
Small Threaded Reducer
No. 52
No. 52F
Size
Nominal Size
inches
DN
E
to E
E
to E
No. 52
No 52F
No. 52
Small Threader
Reducer
Approx.
Weight
E to E
(Each)
inches
lb
mm
kg
No. 52F Concentric
Reducer with BSPT
Female Threaded End
Approx.
Weight
E to E
(Each)
mm
kg
165.1mm x 42.4mm
102mm
2.4
102
2.9
48.3mm
102mm
2.6
102
3.0
60mm
—
—
102
3.0
2
DN50
2 1/2
16.00
406
16.00
406
1.5
0.7
1.7
0.8
—
—
—
—
8
DN200
x
(s) = Carbon Steel Direct Roll Groove (OGS)
(sw) = Carbon Steel Segmentally Welded
NOTES
• Available with British Standard Pipe Threads, specify “BSP” clearly on
order.
• All fittings are ductile iron unless otherwise noted with an (sw) or (s).
User Responsibility for Product Selection and Suitability
Each user bears final responsibility for making a determination as to the suitability of
Victaulic products for a particular end-use application, in accordance with industry
standards and project specifications, and the applicable building codes and related
regulations as well as Victaulic performance, maintenance, safety, and warning
instructions. Nothing in this or any other document, nor any verbal recommendation,
advice, or opinion from any Victaulic employee, shall be deemed to alter, vary, supersede,
or waive any provision of Victaulic Company's standard conditions of sale, installation
guide, or this disclaimer.
Note
This product shall be manufactured by Victaulic or to Victaulic specifications. All products
to be installed in accordance with current Victaulic installation/assembly instructions.
Victaulic reserves the right to change product specifications, designs and standard
equipment without notice and without incurring obligations.
Installation
Reference should always be made to the Victaulic installation handbook or installation
instructions of the product you are installing. Handbooks are included with each shipment
of Victaulic products, providing complete installation and assembly data, and are available
in PDF format on our website at www.victaulic.com.
Intellectual Property Rights
No statement contained herein concerning a possible or suggested use of any material,
product, service, or design is intended, or should be constructed, to grant any license
under any patent or other intellectual property right of Victaulic or any of its subsidiaries
or affiliates covering such use or design, or as a recommendation for the use of such
material, product, service, or design in the infringement of any patent or other intellectual
property right. The terms “Patented” or “Patent Pending” refer to design or utility patents
or patent applications for articles and/or methods of use in the United States and/or other
countries.
07.01 1449 Rev AB Updated 04/2016
victaulic.com
Warranty
Refer to the Warranty section of the current Price List or contact Victaulic for details.
Trademarks
Victaulic and all other Victaulic marks are the trademarks or registered trademarks of
Victaulic Company, and/or its affiliated entities, in the U.S. and/or other countries.
© 2016 Victaulic Company. All rights reserved.
25