cylindro ii - Villa Lighting

advertisement
CYLINDRO II LUX WHITE LED WITH OPAL ACRYLIC DIFFUSER
TYPE :
PROJECT:
ORDER NUMBER:
Finish
LEDs
Dimming
Mount
6713–3 ft., LO
6714 –4 ft., LO
6715 –5 ft., LO
6723–3 ft., HO
6724 –4 ft., HO
6725 –5 ft., HO
S– Silver
W–White
K– Black
W30
W35
W40
BDIM-W1
BDIM-W2
S –Separate
C – Central
C2RDS
C2RDC
C2RDSEM
Example:
6725
• Mounts to all standard JBoxes.
• Available in separate or central
mount (see drawings, right).
•Specify C2RD for remote driver
compartment in accessible
ceiling or through access panel.
•Specify C2RDS (separate)
or C2RDC (central) mount with
remote driver installation.
6700
LED, Separate Mountt
6 5/8
CONSTRUCTION
• Extruded aluminum outer
housing with white frosted
acrylic diffuser. 6’ adjustable
power cord and AC cables with
push button grippers supplied
standard. (Specify XP for
additional length.)
W35
3’ / 4’ / 5’
6700
LED, Central Mount
LED DRIVERS
• Electronic drivers and dimmer
interface housed in canopy
or remote gear box (C2RD),
for easy access.
• cUL listed for dry locations.
LEDs
• Nichia Corp. NFSL757 linear
board chips, available in 6W
per foot (LO –Low Output),
or 11.2W per foot (HO –High
Output).
• White color temperatures
include W30 (3000K),
W35 (3500K), and W40
(4000K); matching the
traditional CCT of existing
incandescent, fluorescent,
and metal halide lamps.
• CRI: 90.0
•R9 ≥ 50.0
6 5/8
3’ / 4’ / 5’
6713 –3 ft., 6W per ft. (LO)
6714 –4 ft., 6W per ft. (LO)
6715 –5 ft., 6W per ft. (LO)
6723 –3 ft.,11.2W per ft. (HO)
6724 –4 ft., 11.2W per ft. (HO)
6725 –5 ft., 11.2W per ft. (HO)
BDIM-W2
C2RDS
Specify LED color:
W30 –White (3000º K)
W35 –White (3500º K)
W40–White (4000º K)
BURBANK,
DIMENSIONS
CALIFORNIA,
Model
ID
OD
91505
6713/2334.875“ 40.625“
6714/2446.9“ 52.625“
6715/2558.9“ 64.625“
W W W.
DELRAY
LIGHTING.
COM
FEB 2016
CANOPY
S
CYLINDRO II .LUX
Model#
LED
CYLINDRO II . LUX
OPTIONS
Delray’s Lux fixtures are second-generation LED luminaires that provide
conventional footcandle levels at less than or equal to 1.4W/FT2.
6725.W30
DIMMING DRIVERS
Lux provides the best lumen/watt ratio per fixture, as well as precise color
temperature matching for multiple fixtures. Standard options include dimming,
for scene control and energy management.
cUL listed for dry locations only.
LM-79 TEST SUMMARY - CYLINDRO 6723.W35
CP DISTRIBUTION
1159
180°
150°
869
120°
579
290
90°
Driver:
Philips Advance
Total Lumens:
5579.56
Input Voltage (VAC/60Hz):
120
Input Power (W):
131.69
Input Power Factor:
0.9954
Efficacy:
42.37
Color Rendering Index (CRI):
90.0
Correlated Color Temperature (K):
3224
• For white LEDs only.
BDIM-W1
• 0–10V dimming to 10%.
•Utilizes 100W/24V, 0–10V
120/277 constant voltage driver.
• Use with 0–10V, purple/gray wire
analog dimmers; with low end
trim pot, and adjust low end
to above flicker threshold.
BDIM-W2
• 0–10V dimming to 1%.
• System utilizes 100W/24V,
120/277 constant voltage driver,
with the Eldo LIN211D1-LN
module.
• Required for use with digital
architecture/networking
systems like Acuity nLight,
Eaton Greengate, and similar
management systems.
290
WATTAGE / LUMENS
579
NOTE : Aircraft cable
suspension not recommended
for outdoor use, where fixture
will be exposed to water,
or subject to wind oscillation.
Avoid use near HVAC vents
and in environments with
corrosive chemical vapors,
such as swimming pools.
60°
869
1159
30°
Vertical plane thru Horiz. 0 – 180°
Horiz. cone thru Vert. angle 85°
COEFFICIENTS
% CEILING 80 (20% FLOOR)
% WALL 70
50
30
0
1
2
3
4
5
6
7
8
9
10
107
95
85
76
69
63
57
53
49
45
42
107
89
76
65
57
50
44
39
36
32
29
107
84
68
56
48
41
35
31
27
24
22
Model No.
Diameter
Watts
Lumens
Drivers
Canopy
6713
3’
66
2790
1
*
6714
4’
87
3683
1
*
6715
5’
128
5400
2
**
6723
3’
132
5600
2
**
6724
4’
176
7400
2
**
6725
5’
219
9300
2
**
Canopy Dimensions
* Single Driver for 6713 and 6714: 11” OD x 2.296” height
** Dual Driver for 6715, 6723, 6724 and 6725: 14.5” OD x 2.205” height
REMOTE DRIVERS
Driver must be accessible after installation. For suspended and hard lid
ceilings with access panels. Canopy mounts to mud ring attached to J-box.
For separate mount, order C2RDS.
000000000000
000
00
0000000000000
NOTES
For central mount remote driver installation, order C2RDC.
Max. Wiring Distance (at full load)
Wire Size (AWG)Distance (ft.)
18
16
14
12
10
18
29
46
71
120
6725.W30
219W LED strip, 3000º K
Total lumens: 9,300
CRI: 90.0
R9 ≥ 50.0
Warning: Do not clean with
ammonia based cleaners
(e.g. Windex®). Use only water
or cleaners specifically formulated
for cleaning plastics.
mounted no less than 4 inches
apart side-by-side, and 1 inch
apart end-to-end, to avoid
overheating.
For emergency, order C2RDSEM (T-bar install shown.)
FEB 2016
ACRYLIC DIFFUSER CLEANING
NOTE: Multiple drivers must be
Download