Catalog 1307895
Revised 9-04
Fiber Optic Products Catalog
“NEW” C-Band Gain Flattened EDFA
■
Gain Flatness over wide
band
■
Low power consumption
■
Low noise figure
■
Integrated control
electronics
■
Input & output isolation
■
Compact size
(90 x 70 x 12 mm)
■
Alarms & monitoring
capability (TTL logic)
■
PC controllable software
■
Fully customizable design
■
Designed for compliance to
GR-1312-CORE
Applications
■
Long Haul & DWDM Metro
■
Inline amplifier
■
R&D Laboratory
Environments with PC
Control Software
■
Single-Channel
Amplification
■
Narrow Band Amplification
Fiber Mgmt, Pkgd Solutions,
Sub Systems & Laser Process
Product Facts
Tyco Electronics' C-Band Gain Flattened
EDFA is a low-cost, compact, and flexible
optical amplifier solution optimized for a
variety of applications within your network
systems or subsystems. The low cost,
optimized gain flatness and high gain
profile enables its use as an inline
amplifier for DWDM metro and long haul
applications. It is capable of signal gains
up to 25 dB with a typical gain flatness of
+/- 0.5 dB and total output power of up to
+13 dBm.
This heightened performance EDFA is available as a cooled inline amplifier with
powerful integrated control electronics or a gain block with input and/or output
monitoring capabilities to meet your needs. The control electronics design includes a
built-in laser and TEC drive circuit with alarms and monitors. The optional RS-232
electrical interface module and included software bundle are designed for control,
ease of use, integration, and/or evaluation in your laboratory.
3
Tyco Electronics is customer driven and is capable of delivering low-cost, customized
functionality for your application. Tyco Electronics can quickly optimize the EDFA
design to meet your specific optical, electrical, mechanical and environmental
requirements. ( Rack mount options available. )
Product Specifications
Optical Parameters
Wavelength Range
Input Power Range
Gain Range
Output power @ -3 dBm input power
Gain Flatness
Gain Flatness (Maximum) Peak to
Peak at Pin = -12dBm
Polarization Dependent Gain
Polarization Mode Dispersion
Optical Stability
Noise Figure
Min
1530
-17
Electrical Parameters
Pump Laser Diode Threshold Current
Pump Laser Diode Forward Current
Pump Laser Diode Reverse Voltage
Monitor Photodiode Forward Current
Monitor Photodiode Reverse Voltage
Power Consumption
Min
Environmental Parameters
Operating Temperature Range
Storage Temperature Range
Operating Humidity
Min
-5
-40
5
Typical
20
Max
1563
-3
25
13
Unit
nm
dBm
dB
dBm
dB
0.98
0.3
0.4
dB
dB
ps
dB
dB
Max
35
220
2
3
20
3.5
Unit
mA
mA
V
mA
V
W
Max
70
85
95
Unit
°C
°C
%RH
+/-0.5
0.2
4.5
Typical
190
0.1
Typical
© Copyright 2004 by Tyco Electronics Corporation.
All Rights Reserved. Dimensions are in millimeters with inches in brackets unless otherwise
specified. Dimensions are shown for reference purposes only.
For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at:
http://www.tycoelectronics.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications.
125
Catalog 1307895
Revised 9-04
Fiber Optic Products Catalog
“NEW” C-Band Gain Flattened EDFA (Continued)
Mechanical Details
Cable-to-Board Electrical Interface Configuration
Pin
1
2
3
4
5
6
7
8
9
10
EDFA Evaluation Kit Controlling and Monitoring
Software with PC Cable
Interface:
1607030-1
Description
5V
5V
5V
5V
Loss of Output Power Alarm
Loss of Input Power Alarm
Output Power Monitor
Input Power Monitor
Amplifier Disable
EDFA Module Temperature Alarm
Embedded Electrical Interface Configuration
Pin
11
12
13
14
15
16
17
18
19
20
Description
Pump Laser Bias Alarm
Reserved
Reserved
Reserved
GND
Serial Input
GND
GND
Amplifier and TEC disable
GND
Pin
21
22
23
24
25
26
27
28
29
30
Description
Reserved
Reserved
Set Gain
Reserved
TEC Disable
Gain Set Acknowledge
Reserved
Reserved
Serial Output
Reserved
C-Band Gain Flattened EDFA Module
Part Number
1607300-1
1607300-2
1607334-1
1607334-2
1607335-1
1607335-2
1607336-1
1607336-2
Description
Gain-Flattened EDFA, Cable-to-Board Elec. Interface, Controllable, LC, 2.0mm fiber diam.,
0.5m fiber length
Gain-Flattened EDFA, Cable-to-Board Elec. Interface, Controllable, SC, 2.0mm fiber diam.,
0.5m fiber length
Gain-Flattened EDFA, Embedded Elec. Interface, Controllable, LC, 2.0mm fiber diam.,
0.5m fiber length
Gain-Flattened EDFA, Embedded Elec. Interface, Controllable, SC, 2.0mm fiber diam.,
0.5m fiber length
Gain-Flattened EDFA, Cable-to-Board Elec. Interface, Gain Block, LC, 2.0mm fiber diam.,
0.5m fiber length
Gain-Flattened EDFA, Cable-to-Board Elec. Interface, Gain Block, SC, 2.0mm fiber diam.,
0.5m fiber length
Gain-Flattened EDFA, Embedded Elec. Interface, Gain Block, LC, 2.0mm fiber diam.,
0.5m fiber length
Gain-Flattened EDFA, Embedded Elec. Interface, Gain Block, SC, 2.0mm fiber diam.,
0.5m fiber length
The Tyco Electronics C-Band EDFA can be bundled with an RS-232 control interface and software control package
allowing the customer the flexibility to experiment with various module parameters through a PC. Parameters such
as EDFA / laser drive currents, input and output power levels, and EDFA gain are all dynamically configurable and
this allows the user to choose appropriate drive currents to achieve the desired output power.
The Tyco Electronics C-Band EDFA module with integrated control electronics and software is an all-in-one solution
that offers all the above functionality within one GUI window via the RS-232 interface module to a PC. Drive current
information, input and output optical power, EDFA gain, and module temperature are all displayed continuously and
updated dynamically.
Data can be stored in a text file (* .txt) in the following format::
"Date and Time: 11/29/2002 4:25:59 PM"
Laser Drive current = 120 mA
Optical Input Power = -15 dBm
Optical Output Power = 10 dBm
EDFA Gain = 25 dB
Case Temperature = 25°C
© Copyright 2004 by Tyco Electronics Corporation.
126
All Rights Reserved. Dimensions are in millimeters with inches in brackets unless otherwise
specified. Dimensions are shown for reference purposes only.
For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at:
http://www.tycoelectronics.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications.