PRE-WIRED WIRING SYSTEM PRODUCT HIGHLIGHTS • Prewired assemblies eliminate on-the-job installation of circuit wires and connectors • Reduces installation costs up to 50% • For rapid-start, slimline, 800MA high-output and 1500MA • Plug-in connectors are shielded in special nylon housings to eliminate possibility of shock from live contacts • Channel connectors furnished with each unit for aligning purposes • I.B.E.W. and U.L. listed CONSTRUCTION - Fixtures plug together, utilizing pre-assembled plugs and receptacles for instant electrical circuit connection in continuous row installations. Electrical assemblies prewired at factory with No. 12 THHN wire. System rated at 20 amps, 600 volts for each circuit. U.L. approved. TO ORDER ADD THE FOLLOWING SUFFIXES TO PRODUCT CATALOG NUMBER PM-1 PM-2 PMT-1 PMT-2 PM3CO TILW For continuous rows of 2 or 4 lamp units - single circuit For continuous rows of 2 or 4 lamp units - double circuit For continuous rows of two 1 Lamp units with a common 2 Lamp ballast - single circuit For continuous rows of two 1 Lamp units with a common 2 Lamp ballast - double circuit For continuous rows of three circuits wired to “cross-over” to eliminate need for three different circuits Tandem in-line wiring for switching lamps on the same side of continuous row multi-lamp fixture * For other options consult factory Example: S-232-SSO-PM-1-120 MULTIPLE LAMP PRE-WIRED ASSEMBLY - MA/AUX PRODUCT HIGHLIGHTS • Uses common ballast for multiple lamp configurations • Saves up to 40% in installation costs • Suitable for use in NEMA ceiling types F and G • Available for any multiple lamp recessed fixture pair SPECIFICATIONS An interconnection cable consisting of 3/8" flexible metal conduit, 18-gauge wire leads, one ground lead, two 3/8" straight connectors, and one polarized nylon receptacle set, all fully prewired at the factory. Wiring arrangements will vary depending on the ballast configuration utilized. Specify 9' or 11' cables. M ULT I PL E L A M P PRE - W I RE D ASSE M B LY Ballast Options Wiring Options SSO - (1) 4-lamp ballast MA/AUX9 - 9 foot cable SSO3 - (3) 2-lamp ballasts MA/AUX11 - 11 foot cable SSO2 - (1) 4-lamp ballast & (1) 2-lamp ballast (CONSULT FACTORY FOR OTHER OPTIONS) EXAMPLE OF TYPICAL ORDER: LA 3 32 SD FIXTURE DESCRIPTION Project Name Catalog # Fixture Type SSO3 MA/AUX9 120 FIXTURE VOLTAGE 10/22/15 © 2015 LSI INDUSTRIES INC. 437