SONIC VAPORIZER – USER GUIDE
INSTRUCTIONS
1. Fully charge the unit.
2. Grind herbs and place inside heating chamber. Do no overfill or pack too tightly.
3. Power on by pushing switch on side of unit.
4. Set vaporizing temperature by pressing + or – buttons. We recommend vaporizing at 360-380F.
5. Press heat button on front of unit.
6. A red light should appear as unit heats up.
7. Once the light has turned green, the vaporizer has reached the desired vaporizing temperature.
8. Inhale slow and steady.
9. Repeat Step 8 until desired effects are reached.
10. Turn off by pushing switch on side of unit.
TIPS
1. A slow and steady inhale will produce the best results.
2. Do not overfill or pack your herbs too tightly. This will restrict airflow and produce negative results.
3. If you’re unsatisfied with the amount of vapor being produced, try raising the temperature. If the
vapor is too thick, try reducing the temperature.
4. Use the included brush to clean heating chamber after each use. This will keep your Sonic Vaporizer
performing optimally.