Product Fact Sheet
InfiniiVision X-Series Oscilloscope Measurement Options and Upgrades
The Keysight Technologies, Inc. offers a variety of application-specific measurement options and performance upgrades for the InfiniiVision 2000, 3000T, 4000, and 6000 X-Series
oscilloscopes that can accelerate debugging and characterizing your designs. The following table summarizes the model numbers of various options available for each oscilloscope
series.
Keysight | InfiniiVision X-Series Oscilloscope Measurement Options and Upgrades – Product Fact Sheet
InfiniiVision
2000 X-Series
Serial bus trigger and decode options
I2C/SPI
DSOX2EMBD
RS-232/UART
DSOX2COMP
CAN/LIN
DSOX2AUTO
CAN/CAN FD/CAN-dbc/LIN –
SENT
–
FlexRay
–
CXPI
–
I2 S
–
MIL-STD 1553/ARINC 429
–
Low-/full-speed USB 2.0
–
Hi-speed USB 2.0
–
Advanced measurements/analysis options
Mask test
DSOX2MASK
DVM
DSOXDVM
Educator’s training kit
DSOXEDK
Power measurements
–
Advanced math analysis
–
NFC trigger and automated –
test software
HDTV video trigger and
–
analysis
USB 2.0 signal quality
–
pre-compliance test
Jitter analysis
–
PC-based software options
Dynamic probe for Xilinx
–
FPGAs
Infiniium Offline analysis
N8900A
software
Keysight Spectrum
64997A
Visualizer (ASV)
BenchLink waveform
–
builder pro (for WaveGen
AWG)
InfiniiVision
3000T X-Series
InfiniiVision
4000 X-Series
InfiniiVision
6000 X-Series
DSOX3EMBD
DSOX3COMP
–
DSOXT3AUTO
DSOXT3SENSOR
DSOX3FLEX
DSOXT3CXPI
DSOX3AUDIO
DSOX3AERO
–
–
DSOX4EMBD
DSOX4COMP
–
DSOX4AUTO
DSOX4SENSOR
DSOX4FLEX
DSOX4CXPI
DSOX4AUDIO
DSOX4AERO
DSOX4USBFL
DSOX4USBH 1
DSOX6EMDB
DSOX6COMP
–
DSOX6AUTO
DSOX6SENSOR
DSOX6FLEX
–
DSOX6AUDIO
DSOX6AERO
DSOX6USBFL
DSOX6USBH 1
DSOX3MASK
DSOXT3DVMCTR
DSOXEDK
DSOX3PWR
Standard
DSOXT3NFC
DSOX4MASK
DSOXDVM
DSOXEDK
DSOX4PWR
Standard
DSOX4NFC
DSOX6MASK
DSOXDVMCTR
DSOXEDK
DSOX6PWR
Standard
–
DSOX3VID
DSOX4VID
DSOX6VID
–
DSOX4USBSQ 2 DSOX6USBSQ 2
–
–
DSOX6JITTER
–
DSOX4FPGAX
DSOX6FPGAX
N8900A
N8900A
N8900A
64997A
33503A
33503A
33503A
1. Hi-speed USB 2.0 trigger and decode option (DSOX4USBFL and DSOX6USBFL) available on 1 GHz
bandwidth models and higher.
2. USB 2.0 signal quality pre-compliance test option (DSOX4USBSQ and DSOX6USBSQ) available on
1.5 GHz bandwidth models and higher.
InfiniiVision
2000 X-Series
Connectivity/hardware accessories
LAN/VGA module
DSOXLAN
GPIB
DSOXGPIB
Rackmount kit
N6466A
Soft carrying case
N6467A
and front panel cover
Performance upgrades
Mixed Signal
DSOX2MSO
Oscilloscope
Segmented memory DSOX2SGM
WaveGen function
DSOX2WAVEGEN
generator
(1 channel)
WaveGen function
–
generator/AWG
100 k to 1 M points
DSOX2MEMUP
memory upgrade
Bandwidth upgrade
Available 4
InfiniiVision
3000T X-Series
InfiniiVision
4000 X-Series
InfiniiVision
6000 X-Series
DSOXLAN
DSOXGPIB
N6466A
N6467A
Standard
N4865A
N2763A
N2733B 3
Standard
N4865A
N2111A
N2733B 3
DSOXT3MSO
DSOXPERFMSO
DSOX6MSO
Standard
–
Standard
–
Standard
–
DSOX3WAVEGEN DSOX4WAVEGEN DSOX6WAVEGEN
(1 channel)
(2 channels)
(2 channels)
–
–
–
Available 4
Available 4
Available 4
3. Front panel cover ships as a standard accessory on all InfiniiVision 4000 and 6000 X-Series
oscilloscopes.
4. Various bandwidth upgrade options are available. Call Keysight for additional ordering information.
To learn more about each option, go to www.keysight.com and enter the option model
number in the search box.
Three-Year Warranty
www.keysight.com/find/ThreeYearWarranty
Keysight’s committed to superior product quality and lower total cost of ownership.
Keysight is the only test and measurement company with three-year warranty
standard on all instruments, worldwide. And, we provide a one-year warranty on
many accessories, calibration devices, systems and custom products.
Keysight Assurance Plans
www.keysight.com/find/AssurancePlans
Up to ten years of protection and no budgetary surprises to ensure your instruments
are operating to specification, so you can rely on accurate measurements.
This information is subject to change without notice.
© Keysight Technologies, 2014 - 2016
Published in USA, July 29, 2016
5991-4137EN
www.keysight.com