+44 (0)20 8868 3732
www.starkstrom.com
S700 RETRACTABLE BOOM PENDANT
Series 700
A retractable boom arm pendant system which can be either
integrally fitted within the return air collar of a Howorth UCV
canopy or alternatively installed as a standalone solution with
extended ceiling cowl arrangement.
The pendant is designed to rotate 270 degrees within the clean
zone, or alternatively the rotation stops can be set to allow 270
degree rotation outside the canopy. Available for UCV canopies
with and without side screens.
This solution provides a neat and tidy approach that actually
works with the UCV canopy and eliminates any clashing with UCV
side screens.
Clinical and Commercial Benefits:
 Rise and fall facility, can retract to above safe head height
when not in use.
 Easy access to gas, power and data.
 Maximises useable space within the UCV theatre.
 In a UCV theatre the S700 is fitted into the return air collar of
the UCV canopy itself negating the need for a separate first fix,
thus reducing cost and affecting perimeter general lighting
layout.
 Oval arm design reduces dust build up and facilitates easy
cleaning.
 Provides efficient access for medical equipment for both
surgeon and anaesthetist.
 Horizontal mounted gas terminal units for quick and easy
connection
 Standard 300mm stroke motor.
 Can be fitted with proximity sensor.
 Keeps the floor space clear around the patient.
 Full installation, commissioning and service available.
www.starkstrom.com
256 Field End Road, Eastcote, Ruislip, Middlesex, HA4 9UW, UK
Tel: +44 (0) 20 8868 3732
Fax: +44 (0) 20 8868 3736
20.0
Ø21.0
1° Draft Angle
S700 RETRACTABLE BOOM PENDANT - TECHNICAL DATA SHEET
1° Draft Angl
e
R10.0
20.0
2000
1700
48.048.0
HEIGHT OF DIFFUSER FROM GROUND
(SEE TABLE)
16.0
R10.0
350
Ø52.0
2000
1700
3 HOLES DRILL
& TAP M5
1st Fix
Plate
90°
Excluding Sensor
Interlock
R16.0
1365
4 M16
PENDANT FIXING
4 HOLES
Ø22
R30.0
40.0
UCV MODEL
4
A
Height Above Ground
UCV28
2750mm
UCV32
2850mm
CONVENTIONAL
2700mm
1
Ref
6
2
5
3
8
Description
1
First Fix Plate
2
Support Tube
3
Threaded Rod M16
4
NIST Termination Plate
5
Ceiling Shroud
6
Motor and Electrical Terminal Box
7
Arm
8
Pendant Head
40
.0
Ø40.0
UNDERSIDE OF DIFFUSER
Maximum Loading At 'Position A'
7
S700 Description
S700 Multi-Movement
Load
Torque
3081N
2529Nm
Capacity
Motor Rating
240v 50Hz 260W 1.2A
Internal Bearing Diameter
Ø105
Head Capacity
14 Electrical Outlets
9 Medical Gas Outlets