application
electrical
• The AGRW Series nightlight provides illumination
for nighttime mobility in hospitals and assisted
living facilities.
• Models in 120 volt or 277 volt available.
construction/finish
• The AGRW was designed with rugged cast
aluminum faceplate and louver to protect the
fixture in most demanding environments.
• Faceplate is finished in a baked powder coating.
• An optional brushed stainless steel faceplate is
available.
• The back box is constructed from 20 gauge CRS.
• A large horizontal wireway accommodates several
branch circuit wires.
• Knockouts in the top, bottom, and side allow 1/2"
and 3/4" conduit.
• Louver tilts forward for convenient and quick
relamping without removing the entire faceplate.
• An optional hospital grade duplex and emergency
sign are available.
• Agion® Antimicrobial protection using silver
technology inhibits bacterial colonization on
interior and exterior painted surfaces. Agion®
antimicrobial is FDA recognized and EPA
registered, meeting all applicable EPA standards.
• ETL Listed to UL1598 requirements.
NST-5001
mounting
Nightlight/Steplight
• Fixture backbox is recess mounted into the wall.
• Adjustable mounting brackets allow for varying
depths of drywall or plaster.
AGRW Series
lamps
Recessed Unit
• Fixture uses energy efficient LEDs or PL lamps.
• 5 Watt white, amber, or blue LED light sources are
available.
warranty
• Luminaire carries a 15 Year limited warranty.
Lamps are excluded from warranty.
• LED boards and drivers are warranted for 5 years.
Specifier’s Reference
Project
Type
Model No.
Comments
Green Choice: AGRW-L38-1LG5-UNV-WT-MW
–
AGRW
–
AGRW – Recessed Wall Mount
–
–
Faceplate
LED Color
WT – White LEDs
AM – Amber LEDs
BL – Blue LEDs
(order only with ‘L38’ lamp
option)
Lamps
–
1L5 – Louver Front
1L6 – Louver Front with
Hospital Grade Ivory
Duplex Receptacle
1LG5 – Louver Front with
Frosted Glass Lens
1LG6 – Louver Front
with Frosted Glass
Lens and Hospital
Grade Ivory Duplex
Receptacle
Series
–
165 – One F6T-5
265 – Two F6T-5
109 – One 9 Watt PL
113 – One 13 Watt PL
L38 – 5 Watt LED
Light Source
Options
Faceplate Finish
Voltage
120 – 120 volt
277 – 277 volt
UNV – Universal
voltage
MW – Mission White
Faceplate
SS – One piece Brushed
Stainless Steel
Faceplate
S – Special Color
Faceplate
TP – Tamper Proof Fastener on
Louver
SDV – Tamper Proof Screwdriver
bit
E – Engraved “EMERGENCY”
SIGN 3/8"X1-13/16"
R – Red Hospital Grade
Duplex Receptacle in Place
of Ivory (order only with
1L6 or 1LG6 faceplate)
EB – Electronic Ballast (available
in 13W quad only; requires
quad lamp)
HPF – High Power Factor Ballast
NST-5001
dimensions & mounting
Recessed Unit
3"
(76mm)
Backbox
9-11/32"
(235mm)
6-1/4"
(159mm)
5-1/2"
(140mm)
10-3/16"
(259mm)
Fascia
features
Brushed Stainless Steel
Faceplate is Optional
Die Cast Faceplate is
Standard
Easy Access For Maintenance
5 Watt PL Steel Back Box
©2011 Philips Vista
All rights reserved.
776 South Green Street • Tupelo, MS 38804
p. 800.576.2135 • f. 800.576.2136
Canadian Division
189 Bullock Drive • Markham, Ontario L3P 1W4
p. 905.294.9570 • f. 905.294.9811
Optional Hospital Grade
Duplex and Emergency Sign
LED Steel Back Box
Contact Factory for Additional Configurations.
Specifications are subject to change without notice.
Some luminaires use fluorescent or high intensity discharge (HID)
lamps that contain small amounts of mercury. Such lamps are labeled,
“Contain Mercury” and/or the symbol “HG”. Lamps that contain
mercury must be disposed of in accordance with local requirements.
Information regarding lamp recycling and disposal can be found at
www.lamprecycle.org