QUALITY ENHANCEMENT CELL BY PROF. DR. AAMIR IJAZ DIRECTOR UNIVERSITY OF THE PUNJAB, LAHORE. Fig. 1 Self Assessment Procedure QEC initiates SA through the dean one semester prior to the assessment Department forms the PT that will be responsible for preparing SAR QEC reviews the Documentation within one month SAR Complete NO YES The Vice Chancellor / Rector forms the AT in consultation with the concerned dean based on the recommendation of the QEC QEC plans and visit the concerned department The AT conducts assessment and presents its findings to QEC, Dean, PT and dept. faculty The QEC submits an executive summary to the Vice Chancellor / Rector Department prepares implementation plan as in table A.2 Follow up of the implementation plan by QEC Legend · QEC: Quality Assurance Committee · PT: Program Team · SA: Self Assessment · SAR: Self Assessment Report SELF ASSESSMENT CRITERIA 1. 2. 3. 4. 5. 6. 7. 8. Program Mission Objectives and Outcomes Curriculum Design and Organization Laboratories and Computing Facilities Student Support and Guidance Faculty Process Control Institutional Facilities Institutional Support Criterion-1: Program Mission, Objectives & Outcomes Intent: Each program must have a mission, quantifiable measurable objectives and expected outcomes for graduates. Outcomes include competency and tasks graduates are expected to perform after completing the program. Criterion-2: Curriculum Design & Organization Intent: The curriculum must be designed and organized to achieve the program’s objectives and outcomes. Also course objectives must be in line with program outcomes. Curriculum standards are specified in terms of credit hours of study. A semester credit hour equals one class hour or two to three laboratory hours per week. The semester is approximately of fifteen weeks. Criterion-3: Laboratories & Computing Facilities Intent: Laboratories and computing facilities must be adequately available and accessible to faculty members and students to support teaching and research activities. In addition departments may benchmark with similar departments in reputable institutions to identify their shortcomings if any. Criterion-4: Student Support & Advising Intent: Student must have an adequate support to complete the program in a timely manner and must have ample opportunity to interact with their instructors and receive timely advice about program requirements and career alternatives. Criterion-5: Process Control Intent: The processes by which major functions are delivered must be in place, controlled, periodically reviewed and continuously improved. To meet this criterion a set of standards must be satisfied. Criterion-6: Faculty Intent: Faculty members must be current and active in their discipline and have the necessary technical depth and breadth to support the program. There must be enough faculty members to provide continuity and stability, to cover the curriculum adequately and effectively, and to allow for scholarly activities. Criterion-7: Institutional Facilities Intent: Institutional facilities, including library, computing facilities, classrooms and offices must be adequate to support the objective of the program. Criterion-8: Institutional Support Intent: The institution’s support and the financial resources for the program must be sufficient to provide an environment in which the program can achieve its objectives and retain its strength. REVIEW Meeting for Expediting Self Assessment Activities of Faculty of Engineering & Technology held on 20-12-2010 (Monday) in the committee room Faculty of Engineering & Technology, University of the Punjab. PROGRESS: Follow up with the Faculty of Engineering & Technology for the submission of their SARs is done but response rate from some departments is very slow and dismal. Latest Status of Faculty of Engineering & Technology Department Program Teams SAR received Sent back for changes SAR received after improvement Audit completed Executive Summary Implement ation Plan Institute of Chemical Engineering & Technology √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ Institute of Quality & Technology Management Department of Metallurgy & Materials Engineering Dr. Syed Nadir Hussain (Team Leader) Dr. Amir Shafiq Dr. Hafiz Muhammad Anwar Asghar Dr. Arshad Mehmood Ali Engr. Bilal Haider √ Dr. Nasir Saeed Butt Dr. M. Usman Awan Ms. Faryal Jalil Ms. Sana Hassan √ Prof. Dr. Abdus Salam Dr. M. Kamran 10 Latest Status of Faculty of Engineering & Technology Department Program Teams SAR received Sent back for changes SAR received after improvement Audit completed Executive Summary Implementa tion Plan Department of Electrical Engineering √ x x x x x x √ √ √ √ √ √ Centre for Coal Technology Mr. Murad Habib Mr. Zeeshan Azmat √ Mr. Khurram Shahzad Ms. Sumaira Kanwal Department of Polymer Engineering & Technology x x x x x x x Department of Textile Engineering & Technology x x x x x x x 11 SURVEY FORMS Teacher & Course Evaluation Form Proforma - 1 Student Course Evaluation Questionnaire Proforma - 2 Faculty Course Review Report Proforma - 3 Survey of Graduating Students Proforma - 4 Research Student Progress Review Form Proforma - 5 Faculty Survey Proforma - 6 Survey of Department Offering Ph.D. Programs Proforma - 7 Alumni Survey Proforma - 8 Employer Survey Proforma - 9 Faculty Resume Proforma - 10 Teacher Evaluation Form Teaching / Learning Process Survey Form TEACHERS & COURSES EVALUATION In order to enhance the quality of education, QEC has already circulated newly developed survey forms related to the teachers and courses evaluation. HODs will interact & coordinate with QEC staff to conduct survey at the end of each semester and also bring any change if required. Assessment is a Continuous Improvement THANK YOU