230923S03 - FMS HEADEND COMPUTER
This PC shall be located in Delta Room to be used as the Primary operator workstation.
1.
1.
2.
3.
4.
2.
1.
3.
CPU
Pentium III 600 MHz, Intel Technology with math coprocessor.
Minimum 3, 32 bit PCI slots, and 4 EISA slots, Minimum 256 K Cache, ZIFF socket.
128 Megabytes RAM. Minimum 70 ns memory speed.
250 W Power Supply or better. Mini tower containing 5 drive bays. CPU stand and monitor
stand to be provided by contractor.
Controller(s)
Enhanced IDE hard drive.
Drives
Hard Drive - Enhanced IDE 8 Gigabytes or larger formatted with a speed of 10 ms or less, half
height.
2. Floppy - 3.5" (1.44 Megabytes).
3. Internal Read-Write CD-DRIVE, Hewlett-Packard 7200i.
1.
4.
1.
2.
3.
4.
CRT
NEC Multi-Sync 17" Flat screen.
Non-interlaced, Green Energy Star, low radiation. Must meet NPR-II standard.
Resolution up to 1280 x 1280, .28 pitch.
Windows Accelerator card - 32 bit PCI, Energy Star compliant with minimum 1 Megabyte of
VRAM, 1280 x 1280 resolution.
5.
Battery Backup
1. Smart UPS APC700 or better.
6.
Printer
Epson FX2170 Series Printer - Minimum requirements shall include:
1.
Letter quality with maximum graphics resolution of 360 x 360 dpi using continuous (tractor) feed
for rear, front, and bottom paper feed, single sheet from top and front paper feed.
2.
24-pin impact dot matrix, bi-directional print direction, letter quality with 12 cps print speed.
3.
8 KB input buffer.
4. Maximum sound level of 46.5 dB (A) normal printing. Minimum 25' printer cable required,
Centronics compatible 8-bit parallel standard interface.
5. Printer to be supplied with black printer ribbon.
7.
1.
2.
Keyboard/Mouse
Logitech or compatible, with 3 programmable buttons and mousepad.
Keyboard - Keytronic KB101, with 101 keys 12 of which are function keys.
230923S03 - FMS HEADEND COMPUTER
Dated: 12/2015
Applies to: All Projects
University of Kentucky
Page 1 of 2
230923S03 - FMS HEADEND COMPUTER
8.
OS Software
Windows 98, latest version.
All application software used, to be provided by contractor upon installation of headend CPU,
CRT, and printer.
3.
All FMS software must be Windows 98 compliant.
4.
All FMS software must provide for unlimited multiple user access.
1.
2.
9.
Network
32 bit, 3Com PCI Ethernet card with AUI, 10/100baseT; compliant with Ethernet 802.3.
Novell compliant to UK Lexington Campus Physical Plant Novell Network.
Local Area Network must be routable and compatible with UK subnetted, (WAN) Ungerman
Bass Network. Coordinate with UK Communications.
4.
Current Drivers compatible with drivers used by UK Physical Plant to be provided by contractor
upon installation of headend. Coordinate with UK Physical Plant.
5.
All network capabilities must provide for unlimited multiple user access.
1.
2.
3.
230923S03 - FMS HEADEND COMPUTER
Dated: 12/2015
Applies to: All Projects
University of Kentucky
Page 2 of 2