UNIVERSITY OF LETHBRIDGE
FACULTY OF MANAGEMENT
Management 3830 - Contemporary Database Applications (Using Access)
Term:
Fall 2002
Instructor:
Brian Dobing, Room E424, 329-2492, brian.dobing@uleth.ca
Class Web Page: http://classes.uleth.ca/200203/mgt3830a
Class Times: Mon, Wed 9:25 – 10:40 PM, AH118 (Some classes will be in a lab)
Office Hours: Mon, Wed 1:40 – 3:45 PM
Other times may be arranged by appointment.
______________________________________________________________________________
Overview
Working in pairs, students will design and build a small database system for a business
application following the five-stage model below:
1. create a data model for the new system;
2. design a database structure based on the data model;
3. design and build a user interface for transaction processing;
4. design and build management reports for analysis and decision making; and,
5. combine all the above into a complete, documented, usable and well-tested system.
Prerequisites
This course requires Mgt 2060, which has included Access since the Fall 1998 term. Those who
took 2060 earlier, have some other introductory software class that did not use Access, or have
studied Access but forgotten all or most of it, should work through the introductory chapters of
the Access text.
Computer Science 1620 is also required. While the class does not require a knowledge of Java or
C++ (or any other language), a basic understanding of programming structures will be needed to
work with Visual Basic for Applications (VBA). Those with Mgt 3821 (Visual Basic) will have
an advantage in learning VBA, but only introductory skills are required. You can build a fairly
impressive system in Access without any programming, but those who can write some code
usually produce even better results.
Systems Project
The systems project has been divided into separate assignments called milestones. The final three
milestones are cumulative. You cannot simply accept a low grade on milestone 5 or 6 and forget
1
about it. The final milestone requires that you submit the complete project, including corrections
to work done in some previous milestones.
Second, you are responsible for building a system and you need to do whatever it takes to
succeed. As with real systems, the answers cannot always be found in specific chapters of a
textbook. Most of you will have limited experience with Access. You will need to develop a
strategy to effectively learn this software, through books, on-line help, in-class demonstrations
and, most importantly, experimentation. The schedule on the last page of this syllabus suggests
readings for some of the topics. You will probably find that learning Access is much more
difficult than learning Word or Excel.
Each milestone will normally be done in teams of two students each. No three-person teams will
be permitted, even if this means that someone must work alone. You can change partners any
time during the first four milestones, or choose to work alone. But the final three milestones are
cumulative and are best done by consistent teams. Two projects of equal quality will get the same
grade, even if one is by a two-person team and the other is by someone working alone.
Assignment Rules
All milestones, including supporting text and diagrams, must be prepared using computer
software. Except for Access, the choice is up to you although Office 2000 is the assumed
standard. All pages must have one-inch margins on all sides. All text should be double-spaced,
with a 12-point font, unless the assignment says otherwise. (This requirement applies to regular
text, not titles, labels inside diagrams, or other special text.) Printed copies must be submitted
when requested; email is not generally acceptable for text or diagrams. However, email will be
used to submit your Access database files. Assignments are graded primarily for content, but
presentation, spelling and grammar are also important.
Note that the emailed databases will generally be due by 3 PM on the day of the class. This
allows me to verify that all of them have been received and are readable before class. The printed
portions of all assignments are due at the start of class. Any extensions due to lab problems,
weather, or other reasons will be emailed to the class list and posted on the course web page.
Please look there first if any unusual events occur. Written assignments can also be left under the
door of my office if I'm not there. Submitted assignments may be used during the class to
illustrate different ways of approaching a problem.
For the first four milestones, there will be a 10% penalty for submissions received between the
due time and the start of class and a 25% penalty for submissions made during class time.
Because the solutions will be discussed in class, no submissions can be accepted once the class is
over. For the final three milestones, late submissions will be accepted with a penalty of 25% per
day. Late penalties are subtracted from the grade you otherwise would have earned. So if
Milestone 1 is submitted an hour late and is worth 80/100, it would receive a grade of 70/100. A
50% penalty means a loss of 50 points, rather than receiving half what you normally would.
2
For milestones 2 and 3, solutions will be presented which represent the final product that would
normally result after an extensive negotiation between the user and the designers. Solutions may
be simplified to limit the workload for the next stage. But, more importantly, the solutions allow
you to continue on the project without the risk of building on an incorrect foundation. Otherwise,
you could begin with an incorrect data model, implement it in Access, and then be unable to
generate the required reports. Teams are free to enhance the basic solution and will receive credit
for doing so in the final milestone. This will be further discussed in class.
Lab Facilities and Software
University Computer Labs, where most of you will build your Access databases, can become
very busy at critical times. Unfortunately, this is unlikely to change. You can use your own
computer, but the official class software is Access 2000. You can build a system in an earlier
version of Access and convert it to Access 2000 (or build it in Access 2000 and save it in an
earlier version). But Access 97 or earlier versions will not read an Access 2000 database.
We have also purchased about 25 licences for Office XP for those who want to experiment with
it. They are supposed to be installed in time for this term. Because we have not fully tested Office
XP, we cannot guarantee that it will work perfectly in the labs. But unlike earlier versions of
Access, Access 2000 can read an XP database so you should be able to convert back to 2000 if
anything goes wrong. (No guarantees on that either, of course.) If you submit an XP database,
please indicate this in the accompanying email so that it is also graded using XP. All database
submissions must be in Access 2000 or XP.
Course Web Page:
Material will be posted on the course web page:
http://classes.uleth.ca/mgt3830a
You should be able to find the course syllabus, assignments, and some class notes. Any
subsequent corrections, additions, etc. will also be posted on the web page. You are responsible
for checking your email regularly.
I will try to respond to email and voice mail messages. However, I cannot provide long and
detailed responses that way. Some questions may be answered on the class web page and/or
brought up in the following class.
Textbooks, Readings, Materials
Two database management texts are available on reserve in the library. Recommended readings
are shown in the class schedule.
Fred R. McFadden, Jeffrey A. Hoffer and Mary B. Prescott, Modern Database
Management, 5th Edition, Addison Wesley, 1999.
This book is by the same authors as the old 4840/4841 textbook. Their notation is a bit different
from that used in the current textbook, but the concepts are similar.
3
Gerald V. Post, Database Management Systems, Irwin/McGraw-Hill, 1999
This book is more applied and should be more helpful in building your project. While Access is
used in its examples, it is not designed to teach Access.
Each team should purchase a book on Access as well. The recommended text is:
Roger Jennings, Using Microsoft Access 2002 Special Edition, Que Books, 2002.
This book should be widely available at reasonable discounts. I did not make the book “required”
because there are a number of excellent alternatives. Those wanting to use XP should get an XP
book. If you already have a good Access book, you may not need another one that covers much
of the same material. Regardless of your choice, a good Access book is essential and you should
not expect to build a satisfactory project without one. Lecture notes alone will not be sufficient.
Two other Access books that have been well received by students in the past are:
John L. Viescas, Running Microsoft Access 2000, Microsoft Press, 1999
Cary N. Prague and Michael R. Irwin, Access 2000 Bible, IDG Books, 1999.
Presumably the 2002 versions will also be good. The "Running" series is designed more for
beginners, as is Mastering Access (Sybex). The "Bible" is a bit more advanced, as is the Access
2000 Superguide (ZD Press). Books with “Dummy,” “Idiot,” and similar words in their titles are
probably not be sufficient to build a good project. But they might help you get started. On the
other hand, books with the words “programming” or “developer” in the title are generally far
more advanced than this class requires and are not a good place to starting learning Access. For
those who are looking for a more advanced book, one of the better choices is Alison Balter’s,
Mastering Microsoft Access 2000 Development, Sams, 1999. But most of the material in this
book is beyond what we will cover in class.
If you can find discounted Access 2000 versions of these or other books, they may be well worth
buying. The changes are minor (at least those that will affect the class project).
The built-in help within Access is surprisingly good, once you have learned the basics. There are
Wizards, Cue Cards and documentation available. Getting help on specific error messages
remains a problem, but books don’t help much there either. Many students have claimed the
online help was their major source of information. And it’s free and readily available!
Access comes with its own sample “Northwinds” database. You can find examples of most of the
features you want by looking through the forms and reports and seeing how they do things.
Finding ideas in Northwinds, books, sample databases and Access web sites is an essential part
of the learning process. However, you are expected to apply the ideas and not just make a copy of
Northwinds or some similar example.
Some possible places to find computer books are listed below. This list was compiled in midAugust and has not been checked or updated since. I have not dealt with all these sites and offer
no guarantees on their service or pricing. Caveat emptor!
4
http://www.amazon.ca/
http://www.bolen.bc.ca/
http://www.canadacomputerbooks.com/
http://chapters.indigo.ca
http://www.copperfields.com/
http://www.halfpricecomputerbooks.com/
http://www.nexuscomputerbooks.com/ (in Calgary)
http://www.pagebytes.com/web_store.cgi
Grading
Your final grade will be determined using the following percentages:
Project
60 (Each milestone value is shown below)
Midterm
15
Final Exam
25
The following is an approximate grading curve. Final scores will be rounded, e.g., 77.5 will be a
B. The actual grade distributions for this semester may be adjusted (but only to the advantage of
students) and will not be determined until the end of the semester when all marks are in. The
final grade distribution will be consistent with past classes.
95-100
90-94
86-89
A+
A
A-
82-85
78-81
74-77
B+
B
B-
70-73
66-69
62-65
C+
C
C-
58-61
50-57
< 50
D+
D
F
Although the exams are worth half your grade, this may be misleading. Individual exam marks
typically have greater variance than project marks, resulting in greater impact on the final grade.
Academic Integrity
It is critical to the reputation of the Faculty of Management, and of our degrees, that everyone
associated with our faculty behave with the highest academic integrity. As a Faculty that helps
create business and government leaders, we have a special obligation to ensure that our ethical
standards are beyond reproach. Any dishonesty in our academic transactions violates this trust.
The University of Lethbridge Calendar addresses the issue of academic dishonesty under the
heading “Student Discipline Policy. Of particular concern, but certainly not the only violations,
are:
 copying someone else's program, even with minor modifications and with or without their
permission, from a diskette, printed copy, or even by observing what they are doing
 providing a disk or printout or otherwise allowing someone else to copy your work
 allowing someone else to do all or part of your assignment
 working jointly with others to create a single solution and then customizing it for each
student
5

presenting code taken substantially from books, CD-ROMs, the Internet or other sources as
your own
Students cheating on exams or assisting others to do so will receive an "F" in the course.
Cooperation between teams is generally encouraged when it involves technical matters, such as
how Access works. But close cooperation on content resulting in virtually identical submissions
is not acceptable. Milestones that include material that has obviously been copied between two or
more teams will ALL receive a mark of ZERO. Thus, it is important that you protect your work
against copying. Any significant copying of programs found in other books or on the Internet will
be regarded as a serious violation and will also receive a mark of ZERO. Receiving any
substantial outside assistance from Access experts is not acceptable. However, applying ideas
found in these sources is strongly encouraged. If you do copy anything, make a note of it just as
you would reference a quotation in a term paper. If you are unsure about what is or is not
acceptable, please see me first.
You also have some responsibility to ensure that your partner does not violate the policy on
Academic Integrity. Should a violation occur, both members are jointly accountable unless the
violation can be clearly attributed to a specific individual.
6
PROJECT MILESTONES
Each milestone is a basic step towards building a database system. Further details on each
Milestone will be distributed in class.
Milestone 0 – Entities and Attributes (20 marks)
Identify the key entities and attributes for a system.
Milestone 1 – Practice Data Model (30 marks)
Create a practice data model for an organization.
Milestone 2 - Data Model (100 marks)
Create a data model capable of supporting the operations and management requirements
identified in the organization description. An important part of this milestone is determining
what those requirements are. Some may not be explicitly stated, but are nevertheless critical to
successful operations. Also consider possible management reports for analysis and decision
making, and what data they will require. Data may also be needed for organizational control,
such as tracking which employee has processed each transaction.
Milestone 3 - Access Database (20 marks)
Implement the data model as a relational database in Access. You will be given a data model to
work with, rather than using your own from Milestone 2. Create each Access table and field
needed and choose an appropriate data type for each field. Choose a key field(s) for each table.
Then build a relationship diagram, which will resemble your data model. The diagram should fit
on the screen and be well organized with all fields visible. (In other words, each data file box
should be large enough that no scroll bars are needed.) Add relationships, including referential
integrity where appropriate. Captions, validation rules, etc. should not be added at this time. Nor
should you add any data.
Milestone 4 - Access Queries (80 marks)
Create a variety of queries to retrieve information, using the Access database (including data)
distributed after Milestone 3. Some of these queries may be useful in creating Forms or Reports
in later milestones.
Milestone 5 - Access Data Entry and Control (100 marks)
Using your database from Milestone 4, the first step is to add control features to the tables (e.g.,
field captions, field sizes, integrity checks, etc.). Then you can create Access Forms, primarily
designed for data entry. For example, systems must often be able to add new customers, modify
7
data for existing ones (e.g., a new address), and record basic transactions. In this milestone, you
will create data entry forms that should be easy to use and prevent obvious errors.
Milestone 6 - Access Reports (100 marks)
Every business requires a number of output forms and reports. Some reports can be generated by
printing Access forms, but most are best done using Access Reports. The purpose of the reports
will be specified, but you will need to determine what data should be included and how it should
be organized.
Milestone 7 - Final System (150 marks)
Each team will submit their final product, a working, documented system that provides at least
the key functionality required. Attach a cover memo to explain what you have done and what
features (if any) you have been unable to include. Be honest - if you hide problems that are
discovered the penalty will be much greater. (That's true both for this assignment and in business
generally.)
There are four key parts to this milestone. First, you need to resubmit some material from earlier
milestones. All forms (Milestone 5) and reports (Milestone 6) will be graded again. However,
different aspects may be tested this time. A project could get a lower or higher score, even if
nothing was changed.
Second, you need to add a Switchboard Form and navigation buttons that allow users to move
among the forms easily. Switchboard Forms often include a default date that can then be used by
other forms (rather than the system date). This simplifies entry of test data, and also allows users
to backdate entries (e.g., process mail received yesterday under yesterday’s date). The system
may also require some security provisions, such as a password.
Third, your system should provide some documentation to help someone install, use, and
maintain the system. Each form should contain built in help, but the time required to do this
would be prohibitive. Instead, only one or two forms (which will be specified later) will require
help screens.
Fourth, you may wish to add some extra features. Be sure to highlight these in your cover memo,
or they might be missed. You can create additional forms and reports, or add new features to
existing ones. Marks for special features will depend on:
 the business value of what was done
 the technical difficulty
 whether the features were discussed in class or are original to your team
 how well the special features work
Keep in mind the fundamental goal of this course. The highest grades will go to the teams
providing the best designed, documented and working systems that support the organization.
8
TENTATIVE CLASS SCHEDULE
Dates
Topic
Readings
Sep 4
Sep 9
Introduction to Database Management
System Development Life Cycle
Introduction to Database Design and Data Models
M1,2
P1
M3
Sep 11
Data Models – Identifiers and Simple Relationships
Sep 16
Data Models – Weak Entities and Relationships
Sep 18
Data Models – Special Cases
Sep 23
Data Models – Review Milestone 1
Sep 25
Building a Relational Database
M6
Sep 30
Normalization
M6 pp.232-241
MAppB, P3
Oct 2
(Lab)
Access Tables and Relationships
J2-5
Oct 7
User Interface Design
P6 pp.190-216
Oct 9
Access Queries
P4, J8-10
Oct 14
Thanksgiving
J12-13
Oct 16
Creating Access Forms
Oct 21
Midterm
Oct 23
Physical Database Design
M7, P9
Oct 28
Report Design
P6 pp.219-227
Oct 30
Creating Access Reports
J14-15
Nov 4
Creating Access Charts and Graphs
J19
Nov 6
Documentation, Partitioning Databases
Nov 11
Linking Forms and Reports
Nov 13
Access Macros
Nov 18
Data Integrity
P10 p363-374
M13 p493-505
Nov 20
Switchboards and Menus
P8, J2 p66-67,
75-77
Nov 25
SQL, Visual Basic for Applications
P7, J26,28
Nov 27
Creating Applications
M9, P5, J23
Dec 2
Database Administration
M8, P11
Dec 4
System Review
Due
MS 0
MS 1
MS 2
MS 3
MS 4
MS 5
MS 6
MS 7
Mn refers to chapters in McFadden, Hoffer and Prescott, Modern Database Management
Pn refers to chapters in Post, Database Management Systems
Jn refers to chapters in Jennings, Using Microsoft Access 2000 Special Edition
9