BCT 219 Cabinetmaking I Assignment 1-B AWI Chapter 100 Lumber Standards 1. List the finished thickness’ of the following nominal rough lumber thickness’: Rough Thickness 4/4 Finished Thickness _______ 3/4 5/4 _______ 1 6/4 _______ 1 1/4 8/4 _______ 1 1/2 10/4 _______ 2 12/4 _______ 2 1/2 2. AWI standards allow you to glue up 2 - 3/8 thick pieces of lumber to acquire 3/4 thick lumber. True False 3. How many natural characteristics would be allowed in a piece of grade 1 white ash lumber measuring 12 96? _______ 4 4. Substitute White Oak in question 3 and determine the number of natural characteristics allowed. _______ 3 5. What is the maximum practical length of the following hardwood lumber: Quarter sawn red oak _______________ 8-10 Walnut _______________ 7-10 Maple ________________ 11-0 Fir _______________ 15-8 6. What is the optimum moisture content of wood used in finished woodworking in Portland Oregon? ______________ 8% 7. What range of interior relative humidity is necessary to keep the moisture content of architectural woodwork at its optimum value in Portland Oregon? _____________________ 25%-55% 8. At 75 what relative humidity is necessary to maintain an 8.5% moisture content in wood? _____________________45.8% 47 - 44 = 3, 8.7 - 8.2 = .5, 3/.5 = x/.2, x = 1.2 47 - 1.2 = 45.8